2LIS_02_HDR and 0PUR_C04 (701)

Hi,
I encounter problems while trying to activate BI content MM-PUR.
Release = 701 0006 SAPKW70106 EHP 1
Cube 0PUR_C04 is linked to infosource 2LIS_02_HDR version 3x.
Datasource 2LIS_02_HDR is on version 7 and is linked to another infosource 2LIS_02_HDR which is on version 7.
I'm not able to find something to reconciliate this problem with the BI content catalogue.
The replication is automatically with version 7.
There is no transfer rules.
I encounder the same problems with 2LIS_02_ITM and other infoproviders DSO/cubes.
Can someone help me, give me a tip on that issue?
Thanks.
Best regards.

Hi Fab,
This is happening because of your BI content version. Please request your basis to upgrade your BI content to version 3 (703) and level 16. That should solve your issue. We also had similar issue and we found a solution in the above mentioned version of BI content. Let me know if you have any further questions.
Thanks and Regards
Subray Hegde

Similar Messages

Implementing BI content (0PUR_C01 and 0PUR_C04)

Hi Experts,
while consulting help.sap regarding the standard BW cubes 0PUR_C01 and 0PUR_C04, i get the following information (in regards to extractors to activate):
0PUR_C01
You can supply this InfoCube with data using either the conventional extraction method or the new one:
Conventional method: Purchasing (2LIS_02_S012)
New method: Purchasing Data (Document Item Level) (2LIS_02_ITM) and Purchasing Data (Document Schedule Line Level) (2LIS_02_SCL)
0PUR_C04
You can supply this InfoCube with data using either the conventional extraction method or the new one:
Conventional method: Purchasing Groups (2LIS_02_S011)
New method: Purchasing Data (Document Header Level) (2LIS_02_HDR), Purchasing Data (Document Item Level) (2LIS_02_ITM), and Purchasing Data (Document Schedule Line Level) (2LIS_02_SCL)
My questions are:
1) why would you activate/use 2LIS_02_S012 or 2LIS_02_ITM and 2LIS_02_SCL for the 0PUR_C01. What are the differences between those 2 methods and why would one chose one over the other
2) why would you activate/use 2LIS_02_S011 or 2LIS_02_HDR, 2LIS_02_ITM and 2LIS_02_SCL for the 0PUR_C04. What are the differences between those 2 methods and why would one chose one over the other
Many thanks
Joana

Hi Joana,
Can you please list out the differences? I've the same problem but was unable to figure out why we need both extractors 0PUR_C01 and 0PUR_C04.
Thanks.

Init load to 0pur_C01 and 0pur_c04

Hi MM Gurus,
I have activated both cubes in our BI 7.0 system Cube 0pur_c01 for detailed reporting, *C04 for the purchasing groups.
When I am filling both cubes at the same time by using infosources
2LIS_02_HDR, 2LIS_02_ITM, 2LIS_02_SCL the requests in the cube 0pur_c04 stay on QM status yellow: "indifferent, not yet finished".
And the requests are not visible for the reporting without QM action.
The requests of the other cube 0pur_c01 have status green.
I also loaded data in full update mode to the cube 0pur_c04 wih the same result.
The results seem to be correct in reporting,
even on the detailed view in the package all is green - only the overall status is yellow.
Anyone an idea how to get these requests automaticaly to status green?
Thanx in advance
BR
Chris

Hi,
Follow the steps below.
Please do this,
Go to Your Cube/ODS manage Data Targets screen
Select Environment Menu >> Automatic Request Processing
Select the option Selt Quality status to OK
Save the settings, when prompted for Transport Request, create a new request and transport across.
Regards.

16 months later and finally 701

it was a lot easier that I ever imagined and pretty fun too. When i started this journey 18 months ago I had zero Credit Cards and a 586 credit score. Now I have 7 cards with about $25,000 in limits currently under 23% usage and my Discover card FICO score as of this morning is a 701. My wife and I are now in a position to sell and move out of our home in a very rough neighborhood and into something better for our family. Thank you everyone. For newcomers take this advice to heart. NOthing can fix the mistakes of your past like time. Ther is no shorcut just pay your bills and do the right thing. I still have one negative account and it kills me because i know it is my fault. What would my score be if i would have taken better care of my student loans. Oh well they have been paid on time for over 48 months now and in time they too will heal themselves.

Another success story Keep up the good work, you're on a collision course with the 800 club. Starting Score: 550 (May 2014)Current Score: EX:642, EQ:654, TU:662Goal Score: 700 across the board

Nokia Suite and Nokia 701 Cable Driver Problems

Hi, I just bought a Nokia 701, and so far I love it, the only real problem I have is that I can't connect it with Nokia Suite through the provided cable, because the driver never get installed properly, everything OBEX fails to install.
So the only real way I can fully connect my Nokia 701 with Nokia Suite is via Bluetooth, but the speeds are dramatically slower. So I'd like to know if there are others having this problem or if I'm the only one. And in case this problem is already known, will there be a solution for it soon?
I also have a Nokia 5800 ExpressMusic and it has the same problem for ages. And it has never been solved, which I think it's pretty bad in a company the size of Nokia.
Just to clarify I'm using Windows 7 at 64 bits, and the latest version of Nokia Suite (3.3), and I'm trying to connect a Nokia 701 and a Nokia 5800, and both get driver incompatibilities that can't be resolved by the automatic Windows 7 search, and can't be resolved by searching for it manually with Windows Update, Windows Compatibility Site says that Nokia 5800 ExpressMusic should be 100% compatible, but, maybe because of the fact that Nokia 701 is relatively new, there is no information on the Windows Compatibility Site, about the device.
Please help me with this problem, it's very important for me to be able to connect both my cellphones via cable to the Nokia Suite application.
A preemptive thank you for all your help.

Hey Sevennikke7, Welcome to the Nokia Forums.
To fix the problem, try the following solutions:
disconnect the USB cable and connect it again.
If you use a USB hub, try connecting the phone directly to the computer.
If you use a USB hub with an external power source, make sure that it has been switched on.
Check the USB cable for problems and replace if necessary.
If your phone asks you for the connection mode that you want to use, make sure that you select Nokia Suite(or PC Suite) on your phone.
Disconnect the cable, restart the computer, and try again.
Keep in mind that if you remove USB devices without using the Safely Remove Hardware tool in the Windows taskbar, connection problems may appear.
Go to Add/Remove Programs in Control Panel (called Programs and Features in Microsoft Windows 7).
Select Nokia Suite in the list of applications and click Change/Remove.
In the dialog that appears, choose Repair.Nokia Suite then check that all the needed files are intact and repairs any errors that were found.
Control Panel > Programs > Programs & features > Nokia Connectivity cable driver, right click and Change/Repair
Try go Control Panel > View Devices > Remove your device profiles and reinstall them.
As both devices cannot connect to your computer I believe it is a problem with drivers inside your PC.
I hope this helps and you manage to resolve your issue. Please get back to me if your problem persists.
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

BAPI_GOODSMVT_CREATE and movements 701 702

Moving the MI10 transaction to the scanner we wanted to use BAPI_GOODSMVT_CREATE to create the actual goods movement.
Research in SCN indicates that this cannot be done. It does work for 711 and 712. Unfortunately, using 711 and 712 increases reporting complexity. (I guess that in my book, an inventory adjustment is an inventory adjustment)
If I cannot use BAPI_GOODSMVT_CREATE then I will probably use FM MB_CREATE_INVENTORY_DIFFERENCE (used by MI10)
My question is:
Can I add MB11 as an allowable transaction for 701 and 702 in MM configuration OMJJ? MB11 is an allowable transaction for 711 and 712. Adding MB11 as as an allowable transaction for 701 and 702 allows 701 and 702 to be valid for BAPI_GOODSMVT_CREATE with good movement code 06
Is anyone familiar enough with this to explain any ramifications?
Thanks in advance

Thanks Sathish
I did some testing without issue but was not sure of any ramifications
I will accept my testing and your experience

Nokia 808 FP1 and Nokia 701 FP1

hi
i have nokia 701 with FP1 ...but i heard that there is differences between nokia 701 fp1 and the one in nokia 808 pureview like the text clock ,note widget and the new music player ...when this upates are coming for the nokia 701 ...And I didnt get the Skydrive update till now on my Nokia 701
and thnx

yeas,there a couple of minor differences between the 808 and 701 with the same os version.t hese are becuase the fp1 is specially built for the 808 while the devices like 7011 are g=not getting it out of the box rather they getting as an update.there are differences between updated os and built in os.those handsets,which get an os built in,have some features which are especially and exclusively made for them like the ones you've described whereas if some other device gets it too,it gets it as an addition;not a basic element.

Nokia 701 (or Belle?) missing features and network...

Hi all,
I used to own a 5800XM that worked great, then bought a 701 to be able to run all the new apps and take advantage of the new Nokia Belle OS.
Well, little disappointment... First, I can't update to 111.030.0609 from 111.020.0307 - apparently because I have an Italian phone. Model number appears to be 059L499, Type RM-774.
Then, I noticed that data connections (WiFi as well as GPRS/UMTS) are NOT listed in the call log, as they used to be with my old (but good) 5800xm. This is a hell of a problem because I'm not able to track down data connections that cost me money... and there we go:
I configured my Hotmail mailbox, then tried to set up NOT to do automatic retrievals... but apparently, every now and then, it will connect and actually update, without permission!
Another data connection issue: in my old (but good) 5800xm, I could configure each access point to be used automatically or after confirmation. I used to set up wifi connections to be automatic, while I requested confirmation for GPRS/UMTS ($$$) destinations. Now this setting is GONE, and my 701 will decide autonomously when to connect, without asking me...
So, if I don't want my phone to become a money hog, I have to deactivate data connection manually, that I don't find very practical as for my user experience...
Another issue, not as relevant, is with the Note app: if I open a note and try closing it without actually modifying its content, I actually save it with a new timestamp, as if it was changed. No big issue, just annoying when it comes to synchronization...
I would consider all the networking issues as bugs. Hope the new firmware will come and fix. Anyone with latest version of Belle could confirm?

Hi mario_sacchi,
Too bad to hear you have not been totally happy with your new device. You can check from here what is the latest SW version available for your device.
To change the priority of the access points go Menu > Settings > Connectivity > Settings > Network destinations > Internet > Long press wanted access point > Change priority. You can set WiFi connections to be priority.
To put mobile data connection "When needed" go to Menu > Settings > Connectivity > Admin settings > Mobile data.
To change the email retrieval go Menu > Email > Settings > The mailbox in use > Auto-retrieval > Configure the settings you want. If it does not retrieve the emails like it should, please go back to Mail > Long press the mailbox > Delete. Then add it again.
If you do not wish the phone to connect to internet without your permission, please set all synchronisations to manual or off.
Thank you for your feedback, all the feedback is valuable to us. Please take a look at Nokia Store if there is a data tracker application that suits your purpose.
Jampe
If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

HRSP604 16 requires WEBCUIF 701 and SAP_BS_FND 702

Hello,
I am trying to import the latest HRSPs for an ERP6 EHP4/NW701 system
SPAM is showing that HRSP 60416 has a condition that WEBCUIF 701 and SAP_BS_FND 702 are required (system is currently at WEBCUIF 700 and SAP_BS_FND 701).
I can't find any mention of those package levels in SAPnet or via MOPZ.
Does anyone know where I can get those packages, or if they are even required?
Regards
Garry Bayford.

Hi,
You can also download it from service market place. Go to Download --> SAP Support Packages --> Applications by Index > Choose E> SAP ERP> SAP ERP ENHANCE PACKAGE> EHP4 FOR SAP ERP 6.0 / NW7.01> Entry by Component> Human Capital Management.
There you will find these packages. Add it to download basket and after approving from MOPZ, then download it.
OR
Select Human Capital Management while downloading from MOPZ then you will get these packages.
Thanks
Sunny

0REVERSEDOC, 0VERSION, 0INFO_REC and 0INFO_TYPE

Hy experts,
I'm using cubes 0PUR_C01 and 0PUR_C04, thta receive data from DS 2LIS_02_HDR, 2LIS_02_ITM and 2LIS_02_SCL.
I'm having some data inconsitencies in the queries.
I've looked to the update rules, and realized 0REVERSEDOC, 0VERSION, 0INFO_REC and 0INFO_TYPE where not mapped.
from what I've been reading I tink this might be the reason my data is not correct.
My question is, how should I map them... To what fields and what type of mapping (direct, routine, etc)?
Also, are there any steps that are necessary in R3 side? (i've activated the DS, included BW in trs BF11, defined industry, delete/setup tables)
Can anyone help?
Many thanks
Joana

Hi,
0REVERSEDOC is used in BW to indicate if the record is canceled or deleted in ECC ,This InfoObject has got three values: R,X and # values,
You can map this field to STORNO .
0version is refer to the version of the item like Actual or plan version...
You can check below table for mapping between field and infoobject .
RSOSFIELDMAP
RSGENFIELDMAP
Regards,
Satya

0PUR_C04

Hi!!
Im using the cube 0PUR_C04 in a standard mode; I activated the infosources and update rules and when I saw the content of infocube some key figures dont have information, I revised the update rules and found this key figures that dont have actualization and I revised the infosource and found that this version dont have this key figures, but the older (2lis_02_s011) have it.
Im using the infosources 2lis_02_ITM, 2lis_02_HDR and 2lis_02_SCL and I really confused about the use of this cube; I followed the instructions of best practices.
Thanks a lot
Monica Elizondo

Hi,
Go To Business content level... find out the 0pur_c04..
according to .. cube.. you have to install infobojects like char and key figure..
and also infosource..
regards,
raj

How will i combine Purchasing and inventory datasources

Dear Folks,
I created one ODS based on 2lis_02_HDR and 2lis_02_itm and other ODS based on 2lis_03_bf and 2lis_03_bf
here requirement is display a report with contract no,validity end date,material grp,vendor,pur grp,cost breakup(subtotal 1---6), Target value, and consumed value based on PO date
for that i am combining above two ODS.
My question is based on which commonfileds i have create an Infoset..
otherwise is there any other way to get the above fields..
Thanks in Advance

Hi
Multiprovider works on union condition
Infoset works on join condtions
If you have two ODS with different granular level of Infoset is the better option
Regards
N Ganesh
assign points if useful **

Reports and applications WEB ABAP in MSS for BP 1.41

Good Night.
I am implementing MSS with BP 1.41, ECC 604 and Portal 701. I need publish a report created in ABAP and two applications WEB Dynpro ABAP in the area of Overview of the Manager.
Ie. I want that in the area of navegation appear the Application Customer.
And the Workset Service Map appear the two applications and the report Z created.
What i should do?
Regards

In latest version of WD ABAP based appraisals, you can change the layout through configuration in spro under -->> Personnel Management -->> Personnel Development -->> Objective settings and appraisals -->> Define tab and process configuration for templates.
However, you need to activate the switches HCM_OSA_CI_1 in order to do the above configuration using the node otherwise the node will not be visible.
Please read the documentation as much as possible in service marketplace and help.sap.com. There is lot of custumization which can be achieved using WD ABAP.
Regards,
Anil Kumar

Google maps 3.2.1 error, and not able to copy all ...

Hi,
Although the google maps version 3.2.1 is working fine in my nokia 808 Belle FP2 but the problem is whenever i am trying to zoom in it is showing "google maps error couldn't write record store:1/0 error"
And 2nd thing i am not able to copy synchronised messages back from nokia pc suite to my nokia 808. Some messages are getting copied randomly and others are not. When i have tried to select all And drag and drop, some got copied and some not. And when i tried to do it individually, again some got copied and the others which did not got copied; showed that messages has been copied successfully but actually it didn't got copied.
Can anyone please provide me with a fix to the above 2 problems?
Thanking you,
P.Bhowmik

santathe1 wrote:
@aspergerguy, can you please confirm that Google Maps 4.01(1) is working for you?
This version only worked post Belle FP2 upon my 700 and as 701 only sold for limited markets there do seem some inconsistencies as to what works compared with 700. Here is screenshot taken just now:
Happy to have helped forum with a Support Ratio = 42.5

Missing values for BWAPPLNM (Application comp) and BWVORG field in psa

We loaded records in to PSA of 2LIS_02_ITM and 2LIS_02_SCL. However, upon passing through the update rules into 0PUR_C01 and 0PUR_C04, we find that the added records to both these infocubes is 0.
Upon closer examination of the update rules, we came across routines which relied on values in PROCESSKEY (BWVORG) and BWAPPLNM fields. These fields donu2019t have values in the PSA.
Kindly mention if any additional settings or configurations have to be done at ECC and(or) BI side other than BF11 settings so that these values get populated in to the BWVORG and BWAPPLNM fields of 2LIS_02_ITM and 2LIS_02_SCL so that those records can be added to the cubes upon passing through the update rules.
With thanks
sam

Hi,
see in transaction SBIW. There is missing the customzing for industrial sector. Set it to "standard (core)".
=> this you need for purchasing and material inventory.
Sven

2LIS_02_HDR and 0PUR_C04 (701)

Similar Messages

Maybe you are looking for