2lis_02_HDR transfer rule is Not Avalibale in BI content

Dear all
I am trying to activate 2lis_02_HDR and other Purchase related Transfer rule in Production system of BI for Production System of ECC ,
I am able to see all those datasourese to other module but not able to find 2lis_02_HDR,2LIS_02_ITM in BI content

my recommendation is first dont activate it in production system, do it in dev then transport it. in ecc you will only fin dthe datasources, whil ein BWD you will have to install its cubes first with the replicated datasource first coming in from R/3..try this link as well
http://help.sap.com/saphelp_sm32/helpdata/en/1d/f4383fdb800804e10000000a114084/frameset.htm

Similar Messages

  • 0SD_C03 transfer rule and update rules do not exist in BI Content

    I am working on SAP BI 7.0 support level 16 and BI Content 703 support level 9.
    I am not finding these objects in BI Content for the Sales Overview Infocube  0SD_C03:
    Update Rules do not exist for 2LIS_11_VAKON,
    2LIS_11_VASCL, 2LIS_11_VASTH, 2LIS_11_VASTI, 2LIS_11_V_SCL,
    2LIS_11_V_SSL, 2LIS_12_VCSCL, 2LIS_13_VDKON.
    Transfer rule does not exist for
    2LIS_13_VDITM, but exists for all other DS.
    7 Transformations exist only for:
    2LIS_13_VDITM
    Can somone help me out with why this is so? Which datasources are to be used for 0SD_C03, 3.x or 7?
    This is an urgent requirement.
    Regards,
    Sony

    Most of the problem has gotten solved by our upgrading to BI Content level 17.
    The others, i made a direct mapping of some of the transfer rules manually.
    It is working fine now.
    Thanks for the replies.
    Sony

  • BI content -- Transfer rules are not mapping automatically

    Have  any one come across with this issue.
    We have connected R/3 system  to multiple BI systems.
    Eg:  we have 1 ECC6 & 2 BI systems.
    Business Scenario is .
    I have two different Companyu2019s  A & B in two different Network Domains ( Domain 1 & Domain2 ).
    u201C A u201C Have Ecc6 & BI  in the Network Domain1
    u201C B u201C Have ECC6 & BI in the Network Domain2.
    With in the Individual Domain ECC6 & BI is working Fine.
      Issue : -
    When I connected Company u201C A u201C Ecc6 ( Domain1 ) to Company u201C B u201C BI system ( Domain2 ).
    The connection is showing OK.
    Replication is also OK,
    But  BI content installation have issue, Transfer rules are not mapping automatically with Standard Data sources ( Eg: 0HR_PA_0 ).
    Thanks in Advanceu2026
    @Shaik...
    Pls this is critical issue ... Basis people is saying this is not the issue of Basis..Connection is OK ...SO . it is the issue of BI only.
    any one Advice me ....
    Edited by: shaik on Aug 24, 2008 5:39 PM

    Hi Raghavendra,
    Thanks for Replay,
    Can you explain me how to check the  data mart Connection  ?
    what i am doing is ....
    step 1: Connection is OK.
    step 2 : Replication is OK.
    step 3 : I am going to Install BC Infosource ( Eg: 0HR_PA_1 )
    Grouping -
    In data flow before.
    source system -
    i check the Ecc6 system which is in different domain.
    then i drag the infosource ..... the transfer rules are not mapping ( Not coming )
    pls Advice....
    @ SHAIK...
    Edited by: shaik on Aug 27, 2008 12:41 PM

  • Transfer rules are not exist for ECC Quality source system in BI Dev

    Hi,
    I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data  I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
    When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
    only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
    Regards,
    chandra

    Hi Fayzrakhmanov
    Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
    The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
    Help on this would be appreciated.
    Thanks

  • InfoObject available in Transfer Rule but not PSA

    Hi experts,
    We require 0COMPANY to be included in our DSO. However, standard DSO and DataSource do not have this InfoObject. What is available is only 0COMP_CODE.
    As such, we include 0COMPANY in the DSO which are then made available in the transfer rule. In this transfer rule, we assign 0COMPANY to copy the value from 0COMP_CODE and activate it.
    After extraction, we do a check in our PSA. However, we are unable to find 0COMPANY in the PSA. What available is only 0COMP_CODE.
    Can I know what is the reason 0COMPANY does not exists in PSA? We have included it in Transfer Rule previously and acticvate it accordingly. As such, records in PSA should show both 0COMP_CODE and 0COMPANY, am I right?
    Many thanks.
    //Points will be rewarded.

    <i>After extraction, we do a check in our PSA. However, we are unable to find 0COMPANY in the PSA. What available is only 0COMP_CODE.</i>
    Yes you will be only be able to see fields available in the datasource in PSA like 0COMP_CODE here.
    <i>Can I know what is the reason 0COMPANY does not exists in PSA? We have included it in Transfer Rule previously and acticvate it accordingly. As such, records in PSA should show both 0COMP_CODE and 0COMPANY, am I right?</i>
    PSA will only show fields available in the datasource.
    Check the Cube or DSO - this will show 0COMPANY.
    Bear in mind if you use 0COMPANY instead of 0COMP_CODE - Master Data of 0COMPANY will be displayed in the report.
    I donot know how different they are.

  • Hierarchy Transfer Strucutre & Transfer Rules are not transported to QA sys

    hai
    I have one master data infobject. And i loaded the text , attribute, hierarchy data from Flat file.
    I need to transport it QA system . I did it.
    But when i checked in QA system. It says that "HIERARCHY TRANSFER STRUCUTRE" is not avaialbel in Qa system .
    So how can i transport the "Hierarchy Transfer Strucutre & Transfer Rules" to QA ssytem .
    Please tell me
    rizwan

    transaction SM59 /  R/3 connections; you should see your system there.
    double click and Test connection.
    then menu/test/authorization.
    if you have transported stuff already then it is most likely because of your flat file source system.... Ensure that they're defined exactly the same way in your DEV and PROD! Right click this source system and perform a CHECK and/or RESTORE and/or ACTIVATE.
    Partner profiles should also be similar. Transaction WE20 / Partner type LS / your flat file sys.
    Finally ensure that your prod sys can access your flat file the same than your DEV!
    did you already import TRules from with flat file?
    hope that helps
    Olivier.

  • Transfer Rules is not Activated in BWQ System

    Hey all,
    I am transporting the Infocubes from BWD to BWQ. I got an error in "errors occured during post-handling RS_After_Import for ISCS L" and "the errors affect the following components: BW-WHM (Warehouse Management)"
    I had assign the "conversion of logical systems names" in BWD and BWQ.
    The detailed error can be viewed under this path:
    http://h1.ripway.com/aywen/TransferRulesDeactivatedinBWQ.zip
    thanks...

    Hi,
    Just check the connection parameters between BWQ and the source system. If it is ok then Replicate the data sources bfore activating the transfer rules.
    Still the problem exists try this functional module in SE38 to activate the transfer rules: RS_TRANSTRU_ACTIVATE_ALL
    Hope this will help you.
    Rgs,
    I.R.K

  • Unable to collect Update/Transfer rules Info & Data sources from BI content

    Hi,
    We are tyring to activate Infoprovider 0PY_CO2 from BI content by selecting the option - In data before. BI is unable to collect all corresponding objects such as Update rules, Info source, transfer rules and the data source for the selected Infoprovider. Only Info area and associated info objects are being collected for the installation.
    We are experiencing same problem whilst acitvating most of the info providers. However, in some cases, either of these objects get activated but not all the necessary objects that feed data to the Infoprovider (cube or multi provider).
    Also, Infopackages and Info object catalogs are not being collected for any objects activated/installed so fare from the BI content.
    We are trying to activate BW 3.5 content on the BI 7.0 environment. BI Content release is 703 and support pack level is 008.
    Kindly share any pointers to troubleshoot this probelm please.
    Thanks
    Venkat

    Shiv,
    For some Info providers, all associated info objects(including transfer & update rules and info source and data sources) are getting collected and got successfuly installed. But this is true for only 10% of the Info providers that we have installed so far.
    Remaining all the objects, we are unable to proceed further.
    Thanks
    Venkat.

  • Transform Update/transfer rules into DTP in Standard Business Content

    Hi all,
    I have a new installation of BI 7.0, and we are massively going to use Standard BC delivered by SAP.
    I received an input from to transform all Update/Transform rule contained in the Standard BC, into DTP.
    First of all I noticed that in the area of interest for our scope the DTP delivered with the standard content are a very small percentage of the all Standard BC (area HCM, FIN, SC). Is it possible?
    Second I have to perform ana analysis on impact/benefits/consequence of performing this transformation. We tried already, but we had some errors, and we had to stop.
    Can you please help me?
    Many Many Thanks
    Valentina

    TR/UR will be migrated to Transformations not DTP - DTP is jst like an Infopackage which loads data from PSA to Datatargets.
    Migrate TR/UR before you Migrate datasources.
    Migrate datasources with WITH EXPORT in RSDS.
    Change the Routines accordingly to OO ABAP.
    There is no standard BC for Transformations and DTP's.

  • Transfer rules not availble in Business content

    Hi,
    In process of  installting  Purchasing module related business content I am facing problem with  Transfer rules. I have activated  all datsources related to Purchasing module in R/3 side and replicated in  BW .
    Except for 2 datsources all other replicated properly. the datasources 2lis_02_itm and 2lis_02_hdr replicated and are in modified version. why they are not in active verion. can anyone help me in this??
    and when i go to business content  only infosurce, communication structure are available for this datasources and transfer rules are not available. I tried the option sof delting the datsource and replicating again, activating the source system etc. and replicating it number of times.but nothing worked.
    and another issue is when I replicated  it didnt propmpt me anythng  to selct the option of  replciate in 3.x or 7.0 version.
    Request anybody's help in this to  get the transfer rules.
    Thanks,
    Kumar.

    Hello,
    Install the business content for purhcasing properly in BI7.
    If you install 2LIS_02_ACC for eg.. you will see... Cube/DSO-Transformation(TRCS)-Infosource-Transformation(RSDS)-datasource.
    Sometimes the TRCS or RSDS will be inactive after installing... check the start routine of the transformation and correct accordingly..
    Let us know how it goes..
    Praveen Tati

  • RSUPDINFO does not contain transfer rules CODEID's

    I did the following:
    1)  Go into table RSAABAP and got all the CODEID's for my search string.  
    2)  Take those CODEID values and use them as a filter for table RSUPDROUT.  No entries came back which tells me that these CODEID's are NOT for update rules.
    3) Tables RSUPDROUT and  RSUPDINFO only contain update rule code and not transfer rule and not start routine code.
    Where can I get the same info as table RSUPDINFO for transfer rule and start routine CODEID?  Any input would be very much appreciated. 
    I am trying to come up with a list of transfer routines, update rules and start routines that contains a certain search string. I can get the list of CODEID from RSAABAP table but based on the CODEID alone, I can't locate the name of the cube, infosource, etc. if the CODEID is not an update rule.

    A.H.P.,
    Thanks - almost there because of your help! I executed SE16 for table RSRSRULES and entered CONVROUT_L = 10 CODEID's and got back only 4 CODEID's back.  Why didn't it show me  records for all the 10 CODEID's I entered?
    This table holds transfer rule info, do you know what table holds start routine code?  Maybe the 6 missing CODEID's are start routines and are held in a different table.
    (I switched company so that why was I had to create another SDN user ID).
    Thanks,
    Thao

  • Transfer Rules not Activating when transported to QAS.

    Folks:
    We are on BW 3.5.
    I have transported and activated the datasource in BW QAS.
    But the Transfer rules are not activated in QAS.
    I have transported the info-pakge successfully.
    When I try to activate the transfer rules manually in QAS I get the following error message:
    You do not have permission to create table /BIC/B0000116000
    Message no. DT097
    Is there a authorization issue here that is affecting the replication of the datasource?
    Thanks
    Denny

    Folks:
    I forgot to mention that the datasource is 0DIVISION_TEXT.
    We are on BW 3.5.
    I have transported and activated the datasource in BW QAS.
    But the Transfer rules are not activated in QAS.
    I have transported the info-pakge successfully.
    When I try to activate the transfer rules manually in QAS I get the following error message:
    You do not have permission to create table /BIC/B0000116000
    Message no. DT097
    Is there a authorization issue here that is affecting the replication of the datasource?
    Thanks
    Denny

  • BI transfer rules missing .

    Dear all,
    we had made a system copy of the source system (ECC) and with BI (Scm) system i.e  both the systems on Quality was refreshed with prod , now  we get the error that transfer rules does not exist on the copied BI system .
    Could any one help
    Regards
    kumar

    Hi,
    See the following  SAP Notes:
    SAP Note 886102  - System Landscape Copy for SAP NetWeaver BW
    SAP Note 325470  - Activities after client copy in BW source systems
    SAP Note 325525  - Copying and renaming systems in a BW environment
    SAP Note 1333302 - Special procedure for BW system copy
    SAP Note 996238  - Dump 'RFC connection error' after BW system copy
    SAP Note 184754  - Procedure after BW database copy
    SAP Note 184322  - Procedure after DB copy of BW source systems
    SAP Note 538052  - Maintenance of Myself destination in BW
    Search for PDF in SDN
    How Tou2026System Copy in SAP Business Intelligence System Landscapes
    Need to activate the objects and then transport.
    Thanks
    Reddy

  • Challenge - Defining "global" variable accessible in Transfer Rules Routine

    Hi,
    Is there a way to define a global variable in BW which is accessible via all the "Routines" in the Transfer Rules in the Info Source.
    Scenario:
    1) I have a field called ZTEXT in the transfer rules.
    2) I am adding code in the Routine to manipulate this data in the Transfer Rules for the Info Source.  Ultimately the RESULT will be populated with a value.
    RESULT = .
    returncode <> 0 means skip this record
      RETURNCODE = 0.
    abort <> 0 means skip whole data package !!!
      ABORT = 0.
    $$ end of routine - insert your code only before this line   
    3) In the Routine Code, the value of the RESULT will be derived based on what's in a field called "g_value".  I don't want to derive the value in the "g_value" field in each Routine for each record that gets processed as it will take a performance hit. I am looking for a way that "g_value" can be populated once e.g. in a START Routine or another alternative and then "g_value" can be used throughout the Routine for any field in the transfer Rules.
    Is there a way to define and populate "g_value" as a global variable so its VALUE can be retained and used in all the Routines in the same transfer rules.  Note that there will be a fair amount of logic to derive "g_value" and hence the need to avoid deriving it each time.
    Could someone advise me if this is even possible?  If so, could you give me a ABAP code sample for it please? 
    Thank you very much,
    Haritha

    if you create the variable as global and in your start routine, calculate and give it a value, you can use that value in all your individual routines.

  • Programme to activate transfer rule

    Hi Gurus
    I am trying to load data to newly transported work from BWD ( infosource 0FI_AA_11 ) but I got some error while loading transactuion data so i was told to run ABAP programme RS_TRANSTRU_ACTIVATE_ALL to activate transfer rules but not sure which transaction I need to use to run this programme .So would you pl tell me the name of the transaction and also tell me the logic behing running this programme?
    Thanks as always

    Hi Gurus
    I have activated all the transfer rules and then try to load the transaction data but its stil;l giving me the same error.
    <b>Extraction of 0FI_AA_12 not possible. Extract 0ASSET_AFAB_ATTR first     
    Errors in source system</b>     
    I have already loaded the master data and I have replicated the data sources also .So pl tell me what and where I need to check to load the transaction data successfully.

Maybe you are looking for