2LIS_02_ITM - Adding field problem

While adding field KTWRT from LBWE to 2LIS_02_ITM ,I get the error as below.
Entries for application 02 still exist in the extraction queue ->
Message no. MCEX151
Diagnosis
Changing extraction structure MC02M_0ITM for application 02 is forbidden, because there are entries that have not yet been processed into an extraction queue for application 02 for at least one client.
If an extraction structure is changed to the entries that are still open in an extraction queue, then these are no longer able to be read and can cause terminations with the collective update.
Procedure
Start the collective update using the function "Job Control" in the Logistics Extraction Structures Customizing Cockpit.
To get an overview of the logistics extraction queues, see the Logistics Queue Overview.
Sounds stupid ,however activities i carried out as listed below to ensure all the steps i covered.
PS -
<b>All the contents from LBWQ,SM13,RSA7,Setup table in all the clients available in R/3 system has been deleted.
Deactivated the update.
</b>
Any help appreciated
Thanks
Chetan
@CP..

Hi,
I am getting the same error.
There are no entries in LBWQ for the MCEX11 and
also no entries in SMQ1 for application 11.
I also ran the collective update using job control with immediate option. There were zero LUW's that were processed.
But, still the error is returned,
Entries for application 11 still exist in the extraction queue ->
Message no. MCEX151
Diagnosis
Changing extraction structure MC11VA0SCL for application 11 is forbidden, because there are entries that have not yet been processed into an extraction queue for application 11 for at least one client.
If an extraction structure is changed to the entries that are still open in an extraction queue, then these are no longer able to be read and can cause terminations with the collective update.
Procedure
Start the collective update using the function "Job Control" in the Logistics Extraction Structures Customizing Cockpit.
To get an overview of the logistics extraction queues, see the Logistics Queue Overview.
Chetan, Can you please let me know,
how you were able to resolve?
Thanks,
Raj

Similar Messages

2LIS_02_ITM - Adding fields to communication structure - User exit

Hello,
I have read the weblog of Roberto Negro concerning the possibility of adding fields to the communication structure of an extractor.
In his article he talks about MCVBAK and so on and refers to enhancements MC10001, MC50001, MC60001.
I am trying to do the same with 2LIS_02_ITM.
The communication structures are MCEKKO and MCKPO.
Can someone explain how to proceed in order to locate the approporiate user exit ?
Claudio Ciardelli

Amit
How to Add payroll period fields(FAPER & IPERIN) to the structure HRMS_BIW_PY1.
These fields are coming from RT_person cluster table.
That will be great help..

Adding field GAMNG ( Target Quantity )in the Data Source 2LIS_04_P_ARBPL

We are adding field GAMNG ( Target Quantity ) in the Data Source 2LIS_04_P_ARBPL ( Work Center View from PP/PP-PI )
The field GAMNG is available in the communication structure maintainace.
The problem is- We are not able to drag & drap field GAMNG from the Communication structure LBWE. Getting the error - End phase 002 ***********************************************************
Message no. D0322 ..
We deleted Setup table , Meins field already exist in comm str.
1. How we able to drag the field from the communication structure as getting the above error. We searched SDN & try to follow that method but not working.
2. We can add the field in SE11 - Structure -Manually, then we have to write ABAP code.
Kindly suggest correct answer.
Edited by: sk kamaruzzaman on Dec 20, 2011 2:08 PM

Hi,
There could be a number of reasons why you are getting the error:
1. Fields are not assigned to datatypes.
- Check structure in SE11 and assign to datatypes.
2. There are inactive appends in the extract structure.
- Double-click one of the includes. You will get a new screen with the INCLUDE structure. Click the button append-structure. Check if the append is inactive.
3. The appended structure is in a different development class from the one of the structure it is being appended to.
Please review and apply the following notes carefully :
766603 Activation problems with extract structures
623411 LBWE: Gener. terminates with D0 322 (end phase 002)
757923 LBWE: Generation terminates with D0 322 (end phase
600708 D0 322: End phase 002
It is not possible to enhance the datasource 2lis_04_MATNR with the field GAMNG (so its possible that its the same for 2LIS_04_P_ARBPL) because GAMNG has the reference field AMEIN, which has a STATE F (forbidden) in table TMCEXCFS .
Check to see if this is the same on your system.
Rgds,
Colum

Adding field in the standard report

Hi ,
i have added the one field in the standard transaction VL06 , in the outboud deliveries report according to the Note 605460. I have to add the field in LIPOV structure.
after adding that field(include structure), in output i am not getting that added field.
please help me .
regards,
ajay reddy

>
Ajay reddy wrote:
> hI,
>
> i got the one more note to display added field in the report . (Note : 128154)
>
> thanks for your tme
>
> regards,
> Ajay reddy
Hi Ajay,
I have the same problem. I have added the field in the field catalog and the field in the final internal table also.
But sometimes its displayed and sometime not.
Looking forward for some help here.
Varun

Adding Fields to Custom Infotype Using Custom Infoset in SAP QUERY

Hi All,
We have a requirement to add fileds to a custom infotype for querying Custom Infoset in SAP Query.
We are facing problem as the added field is not getting displayed in the Query set so that we can select and display it in the Basic List along with the other filds.
Kindly suggest a solution.
Full points will be rewarded.
Thanks in Advance
Kumar

Hi Salman,
Thank you for your valuable information. I haven't Configured Dynamic Actions yet. Is it simple to write the Logic for Dynamic Actions. Is this the only way to solve this Issue?
I tried by adding the standard fields, but they are not populating the values; but just appearing as Input Fields with Input help option.
Please let me know if you have any suggestion in this direction?
Regards,
Hems.

Error message in WebGUI after adding fields with EEWB - Class doesn't exist

Hello!
After adding fields to the component BT111H_OPPT within EEWB and BSP_WD_CMPWB I recieved an error message while trying to open an Opportunity in the WebGUI, stating:
Cannot display view MainWindow
An exception has occured
Exception Class CX_SY_DYN_ILLEGAL_CLASS - Method call of IF_BSP_WD_DYN_RT_REP_SUPPORT~GET_URL_PARAMETERS failed; the class ZL_BT111H_O_BSPWDCOMPONEN_IMPL does not exist
Method: CL_BSP_WD_COMPONENT_FACTORY=>GET_REPOSITORY_XML
Source text Row:25
An exception occured during the activation of target view CUBTOpptOverview.MainWindow for the navigation
An exception has occured
Exceptions Class CX_BSP_WD_RUNTIME_ERROR - View CUBTOpptOverview.MainWindow could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source text Row:162
Has any one an idea, if this could be a bug or what went wrong? I am especially irritated, that it seems, that class was not created. After all I never changed any tables or anything in the background manually. I just used the standard tool EEWB, nothing else.
Many thanks for any kind of help!
By the way, I tried to go back all the steps I took previously to, kind of "un-do" my error, but I was not able to delete all created extensions, due to a another error - but that's a different story, or isn't it?
Cheers,
Marek

Hello Experts,
I know my question was a tricky one and no-one was able to help me from this forum. That's why I would like to share with you the solution I just recieved from SAP:
Although all classes that were created whilst extending the component BT111H_OPPT were deleted, there still existed a seperate extension definition in ViewCluster BSPWDVC_CMP_EXT still persisted.
I wasn't aware of the fact, that I had to delete that too.
Note: in order to delete ViewCluster, use tx SM34
The problem ist now solved!
Cheers!
Marek

Bug after adding fields in advanced search mode of af:query

We are migrating from JDeveloper 11.1.1.6 to 11.1.1.7.
I noticed the following issue:
In a page with search criteria (based on a view object), when the user adds an additional field in advanced search mode and clicks on a full submit button in the page, the following browser popup appears:
"This page is asking you to confirm that you want to leave - data you have entered may not be saved."
This was logged as a bug in Oracle Support but we have not been able to find a workaround yet.
This is the only issue currently blocking us from migrating to 11.1.1.7. Has anyone else faced this issue? Any ideas on how we can bypass this behavior?
Thank you,
Gabriel.

Unfortunately, the latest update from Oracle Support was that they no longer consider this a bug!
SR 3-7706485141: Additional Fields in af:query problem - JDeveloper 11.1.1.7
Bug 17346704 - ADDING FIELD TO AF:QUERY ADVANCED SEARCH CAUSES SPURIOUS WARNING DIALOG POPUP
1. I cannot understand how something that blocks user actions and cannot be bypassed in any way could be considered "acceptable behavior".
2. I also do not understand how a Bug can be lodged and then have its status changed to "Not a Bug".
3. Even if we were to ignore this issue and convince our customers that they should be delayed by meaningless popups while working (which we cannot), their is still another issue that makes this functionality dysfunctional. When the user clicks on "Stay on Page" the popup closes and the page freezes and becomes unresponsive.
Off course this is another issue and a different SR should open, but I think it shows that something is going very wrong with this functionality.
I wonder if anyone else is considering using JDeveloper 11.1.1.7.0 in a production system.

Added fields does not show up in the RSA6

Hello.
Problem 1:
I am enhancing 0bbp_td_sc_1. I added a field to the structure, but it does not show up in the rsa6. ( I double clicked on the extractor name). If I go to the extractor structure (BBP_SC_BW_GET_TD_STRUC), I am able to see the append. The structure is activated. The append structure is also activated (Zabbp_sc_bw_get_td_struc).
What can be wrong? I did not see the added the field in the ROOSFIELD table either.
Problem 2: What is the difference If I populated the field value from RSU5_SAP_BADI to the rsap001 user exit EXIT_SAPLRSAP_001?
I am not able to run debug RSU5_SAP_BADI. STOP does not stop. While I debug, I am able to see the field ( The field I added from problem 1). But the value never populated.
I am able to run the debug for EXIT_SAPLRSAP_001. I see the data populated for the field. But in RSA3 result, I am not able to see it.
Thanks in advance.

Hi
1. this is usualy the case if the append struct is not active or you did not add the new fields in the append struct.
I would suggest to remove the fields save activate and re do the process making sure you either use an existing append struct or create a new one.
2. BADI are different then UE in the way they are implemented. I will recommend using UE.
You will not see the enhanced fields in the out put of RSA3 so I stop on the last line and check the values in the struct.
to debug I would either go to the UE (in a different session) and put a break point there and run RSA3 or check the debug in RSA3 and then find the SAPEXIT that calls the UE.
I hope this helps.
Reg's
Edan

Af:query component added field not removed when remove icon is clicked

I have an af:query component on a popup dialog. In advanced mode when I add a field, the new field appears in the searchRegion followed by a red X remove icon. If I subsequently click that remove icon, the query refreshes, the red icon is gone, but the newly added field still remains. The query component is linked to a standard VO query executable in the bindings. There is no custom processing of the value, model, queryListener or the queryOperationListener. In all other respects the query component works fine. The only problem is a newly added field not being removed when the remove icon is clicked. Here's how the component is setup (an added wrinkle is that the query component is hosted in a Declarative Component, so that makes this code a little harder to decipher).
Does anyone know where I should start looking for this? Hopefully I don't have to implement my own queryOperationListener.
JDev version is Build JDEVADF_11.1.1.4.0_GENERIC_101227.1736.5923
--- snippet from the page fragment ------
<af:popup id="frmsLstPU" contentDelivery="lazyUncached">
<af:dialog id="d1" type="ok"
styleClass="AFStretchWidth" resize="on"
stretchChildren="first" contentWidth="840"
contentHeight="480"
title="#{UnifiedResourceBundle['FORMSLIST.DIALOG.TITLE']}">
<idmkr_adf:Correspondence_Formslist_Query idmkr_query_model="#{bindings.FormVOFlatQueryCriteriaQuery}"
idmkr_table_binding="#{viewScope.FormsListBacking}"
idmkr_table_model="#{bindings.FormVOFlatQuery1}"
idmkr_bindings="#{bindings}"
idmkr_resourcebundle="#{preferences}"
idmkr_printStreamBean="#{viewScope.FormsList}"
id="cf1">
</idmkr_adf:Correspondence_Formslist_Query>
</af:dialog>
</af:popup>
-- snippet from the Correspondence_Formslist_Query declarative component ------
<af:query id="qryId1"
headerText="#{UnifiedResourceBundle['FORMSLIST.QUERY.SEARCH.TEXT']}"
disclosed="true"
value="#{attrs.idmkr_query_model.queryDescriptor}"
model="#{attrs.idmkr_query_model.queryModel}"
queryListener="#{attrs.idmkr_query_model.processQuery}"
queryOperationListener="#{attrs.idmkr_query_model.processQueryOperation}"
resultComponentId="::resId1" displayMode="default"
styleClass="AFStretchWidth"
rows="4" maxColumns="2"/>

I have changed the contentDelivery from "lazyUncached" to "immediate" and the same problem occurs. Thank your for your suggestion.

After adding field to Datasource not getting data for it

Hi All,
I have extended the datasource 2lis_11_VASCL and added three keyfig to it.
I have changed it accordingly in EXIT_SAPLRSAP_001 (trans. data).
In RSA3 when i go to debug mode it is fetching correct data, But the problem is that when i check the data in the rsa3 using displaylist it is not showing newly added fields in the structure.
I have replicated the datasource to BW here i can see newly added fields.when i ran the delta update still it is not extracting anything for newly added fields.
I think my problem is in R/3 only coz it is not showing fields itself in rsa3 or rsa7.
Pls. help me out.
Regards,
Viren.

Hi,
In RSA3 after you display the list choose a record and selected Choose detail(CtrlshiftF3) and check.
Or from the menu select > settings > display variant > current and see if it is in the hidden list.
Jaya

Adding fields from KOMK structure to screen painter.

Hello Everyone,
i have created an Extra tab(like ADDITIONAL DATA B) using BADI, i have added fields from VBAP table, its working fine. But when i add fields from KOMK structure(KOMK-STCEG) only empty field is showing. Do i need to code something in PBO or PAI?
Thanks & Regards,
NarsiReddy Cheruku.

Hello NarsiReddy,
I assume that you have linked the field KOMK-STCEG using "Get from Dictionary" option from your above screenshot.
In PBO section, make sure to write the logic to update the value in the field. The logic which you would build, would be based on your requirement. For instance, you can use BELNR to check and its corresponding STCEG could be found in the structure KOMK.
But if the KOMK structure itself is not filled with any value, then there is some problem with your code. Try to check your BADI and its corresponding structures which would get updated at runtime and use them appropriately.
Thank you.
Regards,
Naresh

Added Field, but no data displayed

Hello Experts,
I have added CITY field successfully in Relationship Assignment Block by creating a new Attribute using WIZARD.
Component : BP_DATA
View: AccountRelationshipsOV
Context Node: BUILRELATIONSHIP
Attribute: City
It has generated
GET_CITY
SET_CITY
GET_M_CITY
GET_I_CITY methods successfully.
I can see the added field in my WEB UI i.e. CITY.
But the problem is when a new Relationship is created or selected by clicking on 'New' on Relationship Assignment Block, it is displaying only NAME but not CITY.
While creating the Attribute thorugh wizard, in Attribute Definition
I have given
Attrib.name        : CITY                ( can this be city or should be ZCITY)
BOL Entity         : BuilAddress
BOLAttribute      : CITY.
What else have to be done to get the data for this particular field.
your suggestions are really appreciated.
Thanks in Advance.
Mythili S

You can add new field in the view as value node(data dictonary) or context node(BOL).
Value node field - in this case if you want to populate the values in the field, you can write code withing GET_CITY. See some sample GET methods
Context note field - since this will be part of BOL structure you do not need to do anything for populating the field. Standard SAP fetched data as whole BOL structure so it should take care.
Hi Anand,
I think this is Context Node field only,
I have created a adde these two fields by right clicking on ATTRIBUTE.
The coding is done in all the methods.
GET_CITY, SET_CITY...etc.
Where could be the mistake?
Thanks & Regards
Mythili

Historical data load for newly added fields

Hi,
we are using cube 0UCSA_C01 with delta update which has gone live now the requirement is we have to add 2 new fields to this cube but the problem is how can we load previous data for dese fields dat has been updated already . Plz letme know hw this can b acheieved plz letme know the proceedure to achieve dis..
Thnx
help will b apprciated

Hi,
populate historical data into a newly added field in an infoprovider
How to populate historical data into a newly added field in an infoprovider
/people/dinesh.lalchand/blog/2006/02/07/loopback-process--follow-up
http://sap.ittoolbox.com/documents/popular-q-and-a/adding-characteristics-to-infocubes-2138
Thanks,
JituK

If library is put on another computer will 'Date Added' field be lost? Thx!

Hi there, I'm planning on reformating my PC (virus problems) and of course i want to take my music along on an externam HD with but I'm not sure how to put my music back while preserving the Date Added field as well as Ratings and Play Count....
any help/suggestions would be greatly appreciated!

Hi, Bryan!
To preserve your playlist and related information, you have to include the iTunes Library files from your old computer in the transfer to your new computer.
They tell iTunes what songs are in your Library, where the song files are located as well as playcounts, ratings, etc.
It's important to maintain the exact same directory structure for your music files on the new computer as you had on the old one, i.e. if the path was C:\Documents and Settings\ user name \My Documents\My Music\iTunes\iTunes Music , it must remain the same ... including the same Windows User Account name.
For some more info, Hudgie's User Tip .
You might want to have a look at

Value-added tax problem about free goods!

Hi All,
I've got a value-added tax problem.....
Can anyone can come out with a solution.
Here is the Business Scenario....
One product company offen give some free goods to its customer company for test or probation. In pricing, the free goods have no income so that the value-added tax is zero, but by the law, the product company must pay the VAT(value-added tax) base on the cost of the free goods.
How to implement this in SD R/3 Scenario...
Can any one of you suggest me a solution for this plz..
Regards,
wang-yuzhen.

Hi,
You need to bring in a consition type "VPRS" in your pricing procedure. The VAT will be determined based on this condition type. VPRS is a statistical condition type. That means eventhough it appears with a value it will potentially not be displayed in your invoice. The invoice value will be 0 and there will be no account posting for this condition type

2LIS_02_ITM - Adding field problem

Similar Messages

Maybe you are looking for