2LIS_02_ITM extraction problem...

Hi,
One ODS contains data from 2LIS_02_ITM in the INIT mode.
ODS has last 5 year data. I want to load the data for
last 2 years as a result of some enhancement.
When I do I full repair request on this ODS with the
selection on 0Doc_date for last 2 years, I get 0 records.
When I do the selection on Posting , even then I get the 0 records
from this datasource.
Can somebody let me know the reason for this?
Thanks for your suggestions.
Thanks.

Hi,
You need some Ideal time to oad the setuptables, because no postings should done at the time of filling the setuptables for all
LO datasources. Just follow the sequence.
Suppose today night you are filling the setuptables..
1. clear all Queues i.e. SMQ1/LBWQ and delete setuptables and lock all Users Ids and fill the setuptable. If it is having date range, just give from data is one month befor i.e. Sep and todate is Todate only and load Init data to BW and fill the setuptables with other date ranges and load full loads to BW and after that set delta.
Thanks
Reddy.

Similar Messages

Any progress on the ACR 7.3+ Bridge repeat thumbnail extraction problem?

Any progress on the ACR 7.3+ Bridge repeat thumbnail extraction problem?
It was very good news that the cropped lens-correction repeat extraction bug was fixed in 8.2, but this newer problem, surfacing in the ACR 7.3 update (and still present in 8.2), is causing a bigger headache than the older bug for some users of Bridge.
Unfortunately, I have been unable to identify a trigger for the condition, which is proving very difficult to recreate reliably, other than it very definitely being introduced with ACR 7.3. Adobe's Steve G told the Bridge forum that the 7.3+ problem had been recreated by Adobe, and was being investigated along with the other (now solved) problem. Has any progress been made? Or is it still a mystery?

Been there, done that:
http://feedback.photoshop.com/photoshop_family/topics/unneccesary_bridge_thumbnail_and_pre view_extraction
They know about it, they just don't know how to recreate it.
Best thing we can do is reliably recreate the fault. My workaround is to only enable Lens Profile Corrections when necessary, as it is a combination of that and some other factor(s) which seems to trigger it.
If you read all the discussions, you'll see that there are two bugs which produce the same symptoms. One introduced in probably ACR 6.1, whichg was fixed in 8.2; and the other was introduced in 7.3 and is ongoing.

2lis_02_itm data extraction problem

Hi,
I activated 2lis_02_itm in ecc6 and run the rsa3 tcod, but it is showing 0 record. is there any way to confirm the records or how to fix that problem, any diag. steps.
Please help me.
Thanks

Hi ROB,
Before performing the above setup filling steps, please make sure that you have deleted the 02 application data from TCODE SMQ1 or LBWQ. You could select the queue and directly delete the data in it, or Run a V3 update. This could be scheduled from TCODE LBWE.
Before filling in the setup tables, you have to first empty the contents of the previously filled setup tables. This could be done by TCODE SBIW.
Please let me know if you need any more information.
Regards,
Pankaj

2LIS_02_SCL : Extracting problem

Hi,
I tried to load 0PUR_C01 with 2LIS_02_SCL ( FULL method ),
but in the monitoring I've got 0 record and an Extraction error which deals with data selection.
Note : I do no selection in my infopackage.
In R/3 my setup tables are filled :
MC02M_0ITMSETUP
MC02M_0SCLSETUP
When I check with RSA3 I've got a lot of records.
For information, I had the same problem with 2LIS_02_ITM
when I used INIT or DELTA infopackage.
But it's work with a FULL infopackage.
Nevertheless, nothing work with 2LIS_02_SCL.
What can i do ?
Thanks
ps : I'm working on SAP 3.5

1. Replicate the data sources and activate the info source.
2. Check the update rules and activate them.
3. Double click on the step -by step in load monitor, what does the error say?
4. Can you copy and paste the error message here we can look at .
Ravi Thothadri

Purchasing Extraction Problem

Hey Gurus,
I am extracting data using datasource 2lis_02_itm and when it gets into PSA there are many records that are doubled up while in RSA3 on the ECC side it shows the correct amount. What could be the problem?
Thanks

Are you running a delta or full load? In a delta, the recordmode is usually what doubles up your record in order to manage the actual changes. If its' a full load, when comparing doubles, do you see any fields that differ?

RG registers and PLA registers - Extraction Problem

Hi,
We have updated balances in table J_2IACCBAL for initial entries for RG registers and PLA registers but the same is not available for extraction in J2I5.
Could you please advise what the problem is?
Regards
Santosh Hegde

Hi Prasanna,
We have updated the balance as on 31.03.2007 as per SAP Help. We tried extracting as on 31.03.2007 as well as 01.04.2007.
Cut over data is as on 31.03.2007 and golive date is 01.04.07.
Pls help
Regards
Santosh Hegde

Extraction Problem- while filling the setup table

Hi all,
I have a problem when i fill the setup table for LO cockpit Extraction on any SD datasources (2_LIS_VAHDR,2lis_13_vdkon etc.,). i am done with LBWQ successfully. i also verified the datasources in RSA6. They are in active status in RSA7-delta queue.
After i submit the request to fill the setup table, i am getting
"datasource 2_LIS_VAHDR contains data still to be transferred". if i check the extract checker (RSA3) i am getting the error msg "data source is not defined in the source system"
Can anybody help me on this?
one of my friend suggested that it could be the reason that some jobs are in active status that loads/updates data into base tables which the datasources refers.
Any idea on the reason and resolutions?
Greatly appreciated !

Hi Vijaya,
We too got the same Error : " the datasources are not defined in the source system".
This is source system connection problem. Check whether connection between R/3 and BW is active.
This error occurs when the connection is inactive.
Also, if it is copy client, then check data exists in other client. If so delete the setup tables data in that client as well.
This will resolve your issue.
Thanks
Edited by: Allen Fyne on Aug 9, 2008 6:47 PM

CO-PA Extraction problem

Dear all,
I created CO-PA datasource with costing-based. When I test extraction (RSA3) in R/3 with no any selection criteria, it only extracts a few data. When I check the CE4XXXX table, there are tons of data in it. It seems like that it gets data from summarization table. I've selected all line item characterisitcs when defining this COPA the datasource. Is there anyone come across this problem before. Thanks a lot for any suggestion.

Hi,
look at this howto (extraction from CE1xxxx):
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
/manfred

Download and extraction problems with CS6 Web and design Premium?

I purchased CS6 from my university and upon trying to download it, the downloader that was downloading it stopped at around 85% and initiated a download cannot continue please contact [email protected] Upon chatting with two agents from the online chat, one of them directed me to download the trial version and activate it with the serial number I got when I activated the product. I got a download error when I downloaded it the first time, and the second time worked. When I went to sue the extract tool that I downloaded alongside the zip file, it worked for about 5 seconds, then I got a "A problem occurred while extracting some files. Check available space on your computer and the write privileges on the destination folder." Theres 140GB's on the drive I'm extracting too, and the folder has full privelages. How can I fix this? Or do I need to angrily demand my money back? I already opened and used it so I can't take it back to the university, and I'm not paying 100$ (which is what I was told it would cost me) to have someone else fix something that should not be broken.

Sorry, I feel your pain but you've posted in the wrong forum--this one is about Audition, the sound editing software.
However, I'm a bit suspicious of the response you got. As far as I know, the one part of support that is free from Adobe is still first-time installation issues and this is handled (usually) by phone with Adobe themselves. Perhaps you're in a different situation because you purchased from your university but something doesn't smell right about what you were told and that email address you were given which isn't an Adobe one.

2LIS_02_ITM extraction program on R3 has a bug!

We deleted some purchasing document items on R3, e.g.,
doc 1
item 1 deleted
item 2
item 3
item 4 deleted
item 5
doc 2
item 1 deleted
item 2 deleted
Run RSA3 on this datasource, find the field "Indicator: Cancel Data Record" for doc1 are all null for doc1 even if item 1 and item 4 has been deleted on R3. This field values are right for doc2 though. Sounds like if all the doc items get deleted then this field shows correct value 'R', if only delete some items of a doc, then the field doesn't indicate the deletion! EKPO table shows that item 1 and item 4 does get deleted, but the extraction program fails to populate this field "Indicator: Cancel Data Record" with correct value 'R'!
Any idea? We have searched OSS Notes, but find something which are only for BW other than for R3. The problem starts at R3 extraction program!
Thanks

Is there a concept like 'document gets cancelled in R/3 only when all its items are cancelled'??
If Yes,could it be that this indicator indicates the 'intention of cancelling' the document rather than the document's item..
Just giving my thoughts..
cheers,
Vishvesh

Pdf text extract problem with CID font and Identity-H

Hi all,
Iam facing some big problem with text extraction from pdf file.
Currently iam using congviews pdf2xl text extraction tool.
About 95% of the text extract correcly but few charaters showing box some ? and some dotted circle mark.
Font Used:
ArialUnicodeMS(Embedded Subset)
Type:(True Type (CID)
Encoding:Identity-H
TimesNewRomanPSMT
Type:True Type
Encoding:ANSI
ActualFont:TimesNewRomanPSMT
ActualFontType:TrueType
Anyone please help me to overcome this.
Regards
Gilbert.X

I tried with acrobat pro9 export option it retrieved only alphabets and numbers all of the hindi charcaters showing just ........
By the way how can i upload the my pdf file within this forum please guide me.
Regards
Gilbert.X

Xml extract problem

I have a problem about sql to extract xml node,the sql followed:
select a.disptx.extract('/Record/_20/text()').getStringVal() from swifti a where swidty = '6666666666666666666'
and the clob is :
<Record>
<swrctm>2223</swrctm>
<swintm>22:23:13</swintm>
<swindt>20100826</swindt>
<fmbank>ssssss</fmbank>
<tobank>444444rrrrrrr</tobank>
<fm>sdfds</fm>
<to>wwwwwwwwww</to>
<mgtype>103</mgtype>
<swftid>dddddd</swftid>
<sw108f>dddddd</sw108f>
<swackf>0</swackf>
<_20>fffffffffff</_20>
</Record>
that throw the exception:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in: '/Record/_20/text()'
ORA-06512: at "SYS.XMLTYPE", line 111
31011. 00000 - "XML parsing failed"
*Cause: XML parser returned an error while trying to parse the document.
*Action: Check if the document to be parsed is valid.
can help me?

you need convert clob to xmltype
select xmltype(a.disptx).extract('/Record/_20/text()').getStringVal() from swifti a
create table test (x clob);
Table created.
insert into test values ('<Record>
<swrctm>2223</swrctm>
<swintm>22:23:13</swintm>
<swindt>20100826</swindt>
<fmbank>ssssss</fmbank>
<tobank>444444rrrrrrr</tobank>
<fm>sdfds</fm>
<to>wwwwwwwwww</to>
<mgtype>103</mgtype>
<swftid>dddddd</swftid>
<sw108f>dddddd</sw108f>
<swackf>0</swackf>
<_20>fffffffffff</_20>
</Record>');
commit;
1 row created.
Commit complete.
SELECT xmltype(x).EXTRACT ('/Record/_20/text()').getstringval ()
FROM test;
XMLTYPE(X).EXTRACT('/RECORD/_20/TEXT()').GETSTRINGVAL()
fffffffffff
1 row selected.http://docs.oracle.com/cd/B10500_01/appdev.920/a96620/xdb04cre.htm

Extraction problem - selection conditions for data load using abap program

Hi All,
I have a problem loading data over a selected period where the selection of date range is done using ABAP routine (type 6). Here though in the request header tab in monitor screen i'm able to see the selection date range populated correctly, no records are being extracted. But if i delete the abap filter and directly give the same date range for selection we are able to extract data. if any body has faced similar problem and have a solution for it please help me with yur suggestion.
Thanks,
nithin.

It seems the the data range is not properly set in the routine.
You can check the value of selection period generated by routine in the data selection tab-> execute button is there .
Click it to to test the selection values generated by the ABAP routine..
If the value here seems correct one then paste the code of the routine that u have written with brief logic details that u have applied.
Sonal.....

Need to solve Client Reporting/Extract Problem... Help!

I have an APEX 2.2.1 application that is running on a linux server. I have a number of customers that put data into it and there customers interact with the data. This all works great!
Now comes reporting. My customers want some canned reports and access to the data for adhoc reports. I do not want someone running adhoc reports on this database. So....
This is what happens right now. Each quarter my partner uses an MS Access database with ODBC linked tables to extract (ETL) the data from the Oracle database into an MS Access database. Then runs a Crystal Report definition agents the MS Access database to produce a complex multi page quarterly/annually report. This report is then emailed to our clients. No adhoc and no automation.
What I would like to do. Allow our customers to request an extract of their data or produce it automatically each quarter. Then our customers could download the extracted data to their machine. Our caned reports would be designed to run against the extracted data. They could also do adhoc reporting.
How could this be done?
1. The idea I am working on right now would be that an MS Access database would be populated for them and loaded into the Oracle database as a BLOB for download. We would also store our Crystal Report definitions as BLOBs for download. The problem with this is MS Access and Linux do not work well to together.
So... How can I pull this off? I would prefer to use Oracle only tools also.

Hi Chris,
Is it possible for you to go to APEX 3.1?
The interactive reports may be the thing you're missing...
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/

Extract() problem in Enterprise manager

OEM issues queries like the following one in several places:
/* OracleOEM */ SELECT c.extract('/element/@name', 'xmlns="http://www.w3.org/2001/XMLSchema"').getStringVal()
FROM table(xmlsequence((
SELECT s.schema.extract('//schema/element')
from dba_xml_schemas s
WHERE s.schema_Url = 'http://www.agralin.nl/WebQuery/ns/data1' and s.owner ='AGE'))) cOne of these places is the clicking of the plus sign in front of an XML schema name, another one is in the definition of an xmltype column, if on the "xml type options" page the "xml schema based" option is selected. In both cases my test server seems to enter an endless loop. I have only one very large schema defined; the original text length is 122 KB, the internal Oracle version is at least 140KB.
A second instance of OEM tells me the execution plan is
1. collection iterator (pickler fectch)
2. select statement
After running for about two hours I killed the server thread, which was by then consuming over half a gigabyte of PGA memory and over 90% of the CPU. I started the subquery in SQL*Plus:
SELECT s.schema.extract('//schema/element')
FROM dba_xml_schemas s
WHERE s.schema_Url = 'http://www.agralin.nl/WebQuery/ns/data1' AND (s.owner = 'AGE')After about five minutes it was clear this query suffered the same problem (although with a different execution plan), so I aborted it as well. My final simplification:
SELECT *
FROM dba_xml_schemas s
WHERE s.schema_Url = 'http://www.agralin.nl/WebQuery/ns/data1' AND (s.owner = 'AGE'))took half a minute with long set to 140000, giving almost the full element text. I did a count(*) to be sure the result set consisted of just one record. Earlier tests, with very simple xmlschema's did respond normally, so I guess the length of my schema is part of the problem.
Is this a known bug, or can anybody give me a workaround?
Age Jan

Again:
ORA-00955: name is already used by an existing object
--edited, i posted a blog but i didn't like it too much:
Starting with step 1) emca -deconfig dbcontrol db -repos drop
later estep 2 (a bit modified):
SQL>> DECLARE
2 CURSOR c1 IS
3 SELECT owner, synonym_name name
4 FROM dba_synonyms
5 WHERE table_owner = 'SYSMAN';
6 BEGIN
7 FOR r1 IN c1 LOOP
8 IF r1.owner = 'PUBLIC' THEN
9 EXECUTE IMMEDIATE 'DROP PUBLIC SYNONYM '||r1.name;
10 ELSE
11 EXECUTE IMMEDIATE 'DROP SYNONYM '||r1.owner||'.'||r1.name;
12 END IF;
13 END LOOP;
14 END;
15 /
DROP USER SYSMAN CASCADE;
DROP PUBLIC SYNONYM SETEMVIEWUSERCONTEXT;
DROP ROLE MGMT_USER;
DROP PUBLIC SYNONYM MGMT_TARGET_BLACKOUTS;
DROP USER MGMT_VIEW;
An advide: logs can told you a lot of information, you should read them in detail.

2LIS_02_ITM extraction problem...

Similar Messages

Maybe you are looking for