2LIS_02_ITM not feting correct records.
For the datasource 2LIS_02_ITM ,
In RSA7 , Delta queue .- Its showing one entry for 2LIS_02_ITM with total - 73 , Is total shows the no. of records in Delta queue ?
When i run the infopackage then in PSA it showing only 32 records get updated.
I think it should be - 73 , pls correct me ?
Thanks
Hello Ram,
Thanks for a good Answers.
I just would like to make a concept. Pls help me in this refrence.
Assume i have a new data source. and i ran init on it.
and from setup table there is 800 records. and it fetch these record sucessfully.
Then I ran delta and it fetch 100 new records. - 100 records.
So if i see the data source in RSA3 then - What will be show if i select update mode as -
D =
F =
Also is the delta request will be avilable in Delta queue also ?
Thanks
Similar Messages
-
Select List field in Form not pulling correct record
I have a report that displays a Product Name and a Host Name. Each product can reside on multiple hosts and each host has multiple products, hence an associative table with product_host_asgmt_id, product_id and host_id is defined.
The report I created selects data from the associative table and presents the user the product names and host names without a problem. the same report has an edit link that when selected will open a form that should display the selected host name and product name. In the form both of these fields are defined as Select List. The issue is that the list shows all the LOV but does not focus on the one that was selected in the report to edit.
I unhid the product_host_asgmt_id, product_id and host_id in the form and the values contained are correct, so I think the Automated Row Fetch is working. This same form needs to be used for editing and for creating new values hence the Select List.
I I have the Source section of the Host_name select list field set to : Only when current session state is null and the Source Type is an SQL query selecting all host_name form the host table.
Any ideas how to get the values selected in the report to appear in the form?
Thanks and apologize if this is trivial. I'm a rookie Apex user (but I like it).When you link to the form page, I assume you are passing the host_id value into a page item. Say you pass this value into item P2_HOST_ID, just make the select list item's Source Type Item (application or page item name) and enter P2_HOST_ID in the Source field.
This assumes that the lov query is of the form "select host_name d, host_id r from ...".
Be careful with Source Used "Only, ..." so that you never allow the page to display with a stale and unwanted value in P2_HOST_ID or that will produce an incorrect display value in the select list.
Scott
P.S. Please tell us your first name and put it into your handle and/or profile to help us. -
Hi All,
I want to Display Some record from table but i m not getting proper data. in my table there three records but it giving mr only last record..
Tables:mast,stpo,vbap,mara.
DATA: BEGIN OF struct occurs 100,
MATNR type VBAP-MATNR,
END OF struct.
DATA: BEGIN OF struct1 occurs 100,
stlnr type mast-stlnr,
idnrk type stpo-idnrk,
menge type stpo-menge,
nlfzt type stpo-nlfzt,
roms1 type stpo-roms1,
EXTWG type MARA-EXTWG,
END OF struct1.
data: itab4 like VBAP occurs 1 with header line.
data: itab1 like MARA occurs 1 with header line.
data: itabstpo like stpo occurs 1 with header line.
select * from mara into table itab1.
select * from VBAP into table itab4.
loop at struct.
ind = sy-tabix.
read table itab4 with key vbeln = struct-vbeln.
if sy-subrc = 0.
move itab4-MATNR to struct-MATNR.
endif.
modify struct index ind transporting matnr.
endloop.
select * from mast into corresponding fields of table struct1 where matnr = struct-matnr and WERKS = company
and stlan = '5' .
select * from stpo into table itabstpo.
// this loop is firing three time and data also showing me at breakpoint but at tha time of printing it is giving me only one record..
loop at struct1.
loop at itabstpo where stlnr = struct1-stlnr.
move itabstpo-menge to struct1-menge.
MODIFY struct1 INDEX SY-TABIX.
move itabstpo-nlfzt to struct1-nlfzt.
MODIFY struct1 INDEX SY-TABIX.
move itabstpo-roms1 to struct1-roms1.
MODIFY struct1 INDEX SY-TABIX.
move itabstpo-idnrk to struct1-idnrk.
MODIFY struct1 INDEX SY-TABIX.
endloop.
endloop.
loop at struct1.
write: / struct1-roms1, struct1-nlfzt ,struct1-menge ,struct1-idnrk.
endloop.
pls help...
Regards,
yunusHi,
i have seen ur code but it is not clear what exactly u want ; can u please clarify ;
There is no data in struct.
hence ur code is not getting executed.
what u can do it
first insert data into struct that is <b>VBELN</b>
<b>at the 1st loop at struct</b>
what u can do is loop at another itab so u can insert data into struct
Mail me @
[email protected]
Message was edited by: Manoj Gupta
Message was edited by: Manoj Gupta -
Photoshop brush does not represent correctly when recorded with Adobe Captivate 7 How do I Fix this?
Hello I have only just recently purchased adobe captivate 7.
I am currently recording some footage in Photoshop and when ever I change the photoshop's brush size it does not correctly record it in Captivate but rather a giant pixelated version of it. or the brush does not match the size of the brush it is painting.
It looks like something like this, http://imgur.com/a/Ko6Wg
I was wondering if it is possible to record the cursor as it displays on my screen.
below you can clearly see it is recording the brush size at the wrong size to what is been drawn. its kinda random in how it does it.
Thanks ahead for anyone who has a soultion.Hi! I have the same problem and I was wondering if you ever figured how to fix it.
-
Infopackage loads 0 record in process chain as BG job not running correctly
Hi Experts,
I have scheduled a daily process chain for Purchasing.
The infopackage in the process chain loads 0 records from R/3 and shows green status but data is available in R/3. Its a FULL update.
But when I load the data manually the infopackage fetchs the record form R/3.
When I checked the background job in R/3 that loaded 0 records, the job gets finished abruptly without fetchig any data.
Please find the job log below:
Job started
Step 001 started (program SBIE0001, variant &0000000210024, user ID RFCUSR)
DATASOURCE = ZPUR_S600
Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 0 *
abap/heap_area_total.......... 0 *
abap/heaplimit................ 40894464 *
zcsa/installed_languages...... ED *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 3000320 *
ztta/roll_extension........... 2000683008 *
Job finished
But the background job for the request when I run the infopackage manually calls a function BW_BTE_CALL_BW204010_E (BTE) and fetches the record from R/3.
Please find the job log that fetches the record when run manually.
Job started
Step 001 started (program SBIE0001, variant &0000000210036, user ID RFCUSR)
DATASOURCE = ZPUR_S600
Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 0 *
abap/heap_area_total.......... 41230008320 *
abap/heaplimit................ 40000000 *
zcsa/installed_languages...... DE *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 3000000 *
ztta/roll_extension........... 2000000000 *
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 26,596 records
Result of customer enhancement: 26,596 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 26,596 records
Result of customer enhancement: 26,596 records
Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 26,596 records
Result of customer enhancement: 26,596 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 26,596 records
Result of customer enhancement: 26,596 records
Asynchronous send of data package 000002 in task 0004 (1 parallel tasks)
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 1,062 records
Result of customer enhancement: 1,062 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 1,062 records
Result of customer enhancement: 1,062 records
Asynchronous send of data package 000003 in task 0006 (1 parallel tasks)
tRFC: Data Package = 000001, TID = , Duration = 000001, ARFCSTATE =
tRFC: Start = 20110217 054648, End = 20110217 054649
tRFC: Data Package = 000003, TID = , Duration = 000000, ARFCSTATE =
tRFC: Start = 20110217 054652, End = 20110217 054652
tRFC: Data Package = 000002, TID = , Duration = 000001, ARFCSTATE =
tRFC: Start = 20110217 054651, End = 20110217 054652
Job finished
Kindly help me on this issue as why the job run through process chain is not fetchibg any records.
Regards,
IndhujaHi Prasanth,
If the background jobs are not availbale when IP is triggered then the BG job will ot be executed and the IDOCs will get struck.
Once we push the IDOc only the BG job will be executed until then the PC will wait with yellow status.
Hence this is not the issue with the non availability of BG WP.
Also for last one week this issue was happening but today the job executed successfully through the Process chain itself.
Then it shows this is not the issue with PC also.
The job is executed using RFCUSR.
Please suggest what would be the possible cause for this issue.
Regards,
Indhuja
Edited by: Induja Rajkamal on Feb 23, 2011 11:48 AM -
Sorting not working correctly for date field in alv report
Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work -
10g exporting to CSV using client_text_io is not working correctly.
I have an odd issue which i could do with some help with. I run an function that exports to CSV based on an pre defined record group.
This has been working fine for many months with various customers. Recently a new customer used it and they have 28k rows in his record group and the export is actually not exporting correctly.
The record group has a record count of 28331.
The CSV produced has only 3756 in my CSV file. These are the last 3756 records in the Record group so its as if its overwriting the data as it goes yet all smaller datasets work
FUNCTION fun_export_csv (vgraphid NUMBER, p_filename VARCHAR2)RETURN BOOLEAN IS
out_file client_text_io.file_type;
i NUMBER;
lv_line VARCHAR2(5000);
BEGIN
rg:=populate_group('RG11_EXP');
synchronize;
lv_line:= ('"GIN","Gin Date","PO Num","PO Required Date","Mat Num","Mat Description","Supplier Part No","On Time Delivery(Yes-1, No-0)"');
client_text_io.put(out_file, lv_line);
client_text_io.new_line(out_file,1);
For i in 1..get_group_row_count('RG11_EXP') Loop--this count is 28331
lv_line:= ('"'||get_group_number_cell('RG11_EXP.col1', i ) ||'"'|| ',' ||'"'||
get_group_date_cell('RG11_EXP.grn_date', i ) ||'"'|| ',' ||'"'||
get_group_number_cell('RG11_EXP.po', i ) ||'"'|| ',' ||'"'||
get_group_date_cell('RG11_EXP.daterqd', i ) ||'"'|| ',' ||'"'||
get_group_char_cell('RG11_EXP.item_no', i ) ||'"'|| ',' ||'"'||
get_group_char_cell('RG11_EXP.desc', i ) ||'"'|| ',' ||'"'||
get_group_char_cell('RG11_EXP.part_no', i ) ||'"'|| ',' ||'"'||
get_group_number_cell('RG11_EXP.ontime', i ) ||'"');
client_text_io.put(out_file, lv_line);
client_text_io.new_line(out_file,1);
END LOOP;
client_text_io.FCLOSE(out_file);
RETURN TRUE;Hello,
Try to insert a "synchronize" instruction from time to time:
i pls_integer := 1;
Loop
If mod(i, 500) = 0 Then
synchronize;
End if ;
i := i + 1 ;
End loop;
...<p>But keep in mind the the CLIENT_TEXT_IO generate a lot of network traffic, so it is better and faster to generate the file on the A.S., then after transfer it to the client machine.</p>
Francois -
** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)
Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric fieldHi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
wls_fieldcat-col_pos = wpv_pos.
wls_fieldcat-fieldname = wpv_champ.
wls_fieldcat-tabname = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
wls_fieldcat-seltext_l = wpv_libelle.
wls_fieldcat-ddictxt = 'L'.
wls_fieldcat-no_out = wv_no_out.
APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P. -
Report refresh does not contain correct data
Hi all,
I'm having a problem with an interactive report. this report contains checkboxes for each row.
When clicking the submit button, a process is called which changes the status of the checked records.
This status change should cause the IR to not query these records anymore after the submit, but they still appear even though i did a commit after the proces.
When i refresh the page the correct records are removed from the report.
Is this normal because i thought the page processes are completed before branching is executed.
Grtz,
Mariomy mistake, i was doing a query with sysdate in the where clause, but when using systimestamp this problem was solved.
-
REPORT DOES NOT RUN CORRECTLY , URGENT PLEASE HELP
Hi,
I am trying to run a report from visul basic screen, but it does not run correctly. Here is how I am running the report. There is a screen developed in VB This screen prompts the user for user id and password. Once it gets that, it connects to the oracle database and pulls out a column from a table. And passes that value as a parameter to the report. Now I am calling the the report for each individual value . There are 21 value being pulled out of the database and it invokes the report 21 times. So there are 21 report engines gets started. Is there a better way to do that ? Secondly when I pass the parameter , some parameters does not pass correctly I guess , because its not generating any out put . Like out of 21 may be 10 or 11 reports gets generated correctly but rest of the reports are blank. I debug the screen i saw that the parameter value is correct, everything seems good. But still the reports are comming blank. Any Idea why it is so ? The command line that i am using in VB screen is
Shell "C:\progra~1\ora95_2\bin\rwrun60.exe P:\Business_Analysis_&_Reporting_Tool\Test_REPORT_Templates\STORE_TYPES\Baby_Distribution_Report.Rdf USERID=" & UID & "/" & PWD & "@cposp201 DESFORMAT=PDF DESTYPE=FILE DESNAME=" & txtPath.Text & Replace(strName, " ", "_") & ".PDF BRND='" & adoRecBrand!Brand & "' PRINTJOB=NO PARAMFORM=NO"
In the above command " adoRecBrand!Brand " is the parameter thats being passed. This is actually a recordset and brand is the column in it. When I debug the screen , I see the value also there. But the report comes out blank. Please help. This is urgent.
Thanks
FerozThe way you call reports is not scalable. If you have 100 records come back from database, you would end up launch 100 engines at the same times, which probably will blow up your machine. You should use oracle reports server to do that. You can either use rwcli60 to submit the job to reports server, or invoke rwcgi60 from URL.
I am afraid some of reports engine failed to start and you get nothing back in your case.
After switch to use reports server achitecture, if you still see some report is blank in your application, then you can run that report with that special set of parameters manually and see if any problem with the report itself.
Hope this helps.
Thanks,
-Shaun -
Windows 8.1 is not detecting blank/recorded cds
I tried serveral ways to fix this problem but the CD/DVD rom still did not recocognize my recorded cds. movie DVD and antivirus software installation DVD work perfectly. I read some topics online and they said that windows 8 and 8.1 won't allow laptop reading/playing unlicensed CDs and DVDs, am I correct? If it is so, how can I play my recorded cd on laptop? Thanks!
Thanks for helping me!
Here is my laptop information:
HP ENVY m6-1125dx Notebook PC
Here are the results after checking three discs:
Update: Jan 17 2014
1. DVD movie
sequential read test: PASSED
random read test: PASSED
read and write compare test: The media in the drive is not te type required for tje selected test
2. Kaspersky installation for PC
sequential read test: PASSED
random read test: PASSED
read and write compare test: The media in the drive is not te type required for tje selected test
3. blank CD
sequential read test: The selected test requires non blank media for testing
random read test: The selected test requires non blank media for testing
read and write compare test: PASSED
I already refreshed the PC but it's still so
I don't have a OS installation CD/DVD. the PC comes with the recovery partition (reinstallation and refresh PC) -
Bc4j not behaving correctly when details are repeatedly added/removed
Hi,
I'm having problems creating a form with a master detail relationship. Seems like bc4j is not behaving correctly when details with the same keys are repeatedly added and removed.
I've 3 entities maintenance order, maintenance and maintenance type with the relationships maintenance order 1:n maintenance n:1 maintenance type. My application module data model has one view for each of these entities and a view link between maintenance order and maintenance.
In the maintenance order form, I can choose which maintenance types apply to a maintenance order by marking checkboxes. The struts action that saves the maintenance order, I remove/add maintenance records base on the selected/unselected checkboxes.
Sequence of events:
1) Open maintenance order - Maintenance order shown with all maintenances selected
2) Uncheck all maintenances and save order - all maintenances removed from db
3) Open maintenance order - Maintenance order shown with no maintenances selected as expected
4) Check all maintenances and save order - all maintenances saved to db
5) Open maintenance order - Maintenance order shown with all maintenances selected as expected
6) Uncheck all maintenances and save order - NO maintenances removed from db
7) Open maintenance order - Maintenance order shown with NO maintenances selected, even thought there are maintenances in the db
8) Check all maintenances and save order - bc4j tried to insert new maintenance records in the db and an exception was raised due to unique constraint violation
My environment is: Sun JDK 1.4.1_01, JDeveloper 9.0.3.4 (build 1247), testing with the embedded server
Server log produced with jbo.debugoutput=console:
[17] BC4J Property jbo.default.language='pt' -->(MetaObjectManager) from System Default
[18] BC4J Property jbo.default.country='BR' -->(MetaObjectManager) from System Default
[19] BC4J Property DeployPlatform='LOCAL' -->(SessionImpl) from Client Environment
[20] Skipping empty Property ConnectionMode from System Default
[21] Skipping empty Property HostName from System Default
[22] Skipping empty Property ConnectionPort from System Default
[23] BC4J Property jbo.locking.mode='pessimistic' -->(MetaObjectManager) from System Default
[24] Skipping empty Property ApplicationPath from System Default
[25] BC4J Property AppModuleJndiName='br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.CadastroDeManutencaoModule' -->(SessionImpl) from Client Environment
[26] Skipping empty Property java.naming.security.principal from System Default
[27] Skipping empty Property java.naming.security.credentials from System Default
[28] Skipping empty Property jbo.user.principal from System Default
[29] Skipping empty Property jbo.object.marshaller from System Default
[30] BC4J Property jbo.use.pers.coll='false' -->(SessionImpl) from System Default
[31] BC4J Property jbo.pers.max.rows.per.node='70' -->(SessionImpl) from System Default
[32] BC4J Property jbo.pers.max.active.nodes='30' -->(SessionImpl) from System Default
[33] Skipping empty Property jbo.pcoll.mgr from System Default
[34] BC4J Property jbo.txn_table_name='PS_TXN' -->(SessionImpl) from System Default
[35] BC4J Property jbo.txn_seq_name='PS_TXN_seq' -->(SessionImpl) from System Default
[36] BC4J Property jbo.control_table_name='PCOLL_CONTROL' -->(MetaObjectManager) from System Default
[37] BC4J Property jbo.stringmanager.factory.class='use_default' -->(SessionImpl) from System Default
[38] BC4J Property jbo.fetch.mode='AS.NEEDED' -->(MetaObjectManager) from System Default
[39] BC4J Property jbo.323.compatible='false' -->(MetaObjectManager) from System Default
[40] Skipping empty Property JBODynamicObjectsPackage from System Default
[41] BC4J Property MetaObjectContextFactory='oracle.jbo.mom.xml.DefaultMomContextFactory' -->(MetaObjectManager) from System Default
[42] BC4J Property jbo.load.components.lazily='false' -->(MetaObjectManager) from System Default
[43] BC4J Property MetaObjectContext='oracle.jbo.mom.xml.XMLContextImpl' -->(MetaObjectManager) from System Default
[44] BC4J Property java.naming.factory.initial='oracle.jbo.common.JboInitialContextFactory' -->(SessionImpl) from Client Environment
[45] BC4J Property IsLazyLoadingTrue='true' -->(MetaObjectManager) from /oracle/jbo/server/jboserver.properties resource
[46] BC4J Property ActivateSharedDataHandle='false' -->(MetaObjectManager) from System Default
[47] Skipping empty Property HandleName from System Default
[48] Skipping empty Property Factory-Substitution-List from System Default
[49] BC4J Property jbo.project='Sinalizacao' -->(Configuration) from Client Environment
[50] BC4J Property jbo.max.cursors='50' -->(MetaObjectManager) from System Default
[51] BC4J Property jbo.dofailover='true' -->(Configuration) from System Default
[52] BC4J Property jbo.doconnectionpooling='false' -->(Configuration) from System Default
[53] BC4J Property jbo.recyclethreshold='10' -->(Configuration) from System Default
[54] BC4J Property jbo.ampool.dynamicjdbccredentials='true' -->(Configuration) from System Default
[55] BC4J Property jbo.ampool.resetnontransactionalstate='true' -->(SessionImpl) from System Default
[56] BC4J Property jbo.ampool.sessioncookiefactoryclass='oracle.jbo.http.HttpSessionCookieFactory' -->(Configuration) from Client Environment
[57] BC4J Property jbo.ampool.connectionstrategyclass='oracle.jbo.common.ampool.DefaultConnectionStrategy' -->(Configuration) from System Default
[58] BC4J Property jbo.ampool.maxpoolsize='2147483647' -->(Configuration) from System Default
[59] BC4J Property jbo.ampool.initpoolsize='0' -->(Configuration) from System Default
[60] BC4J Property jbo.ampool.monitorsleepinterval='600000' -->(Configuration) from System Default
[61] BC4J Property jbo.ampool.minavailablesize='5' -->(Configuration) from System Default
[62] BC4J Property jbo.ampool.maxavailablesize='25' -->(Configuration) from System Default
[63] BC4J Property jbo.ampool.maxinactiveage='600000' -->(Configuration) from System Default
[64] BC4J Property jbo.ampool.doampooling='true' -->(Configuration) from System Default
[65] BC4J Property jbo.passivationstore='null' -->(MetaObjectManager) from System Default
[66] BC4J Property jbo.saveforlater='false' -->(SessionImpl) from System Default
[67] BC4J Property jbo.snapshotstore.undo='persistent' -->(SessionImpl) from System Default
[68] BC4J Property jbo.maxpassivationstacksize='10' -->(SessionImpl) from System Default
[69] BC4J Property jbo.txn.handleafterpostexc='false' -->(SessionImpl) from System Default
[70] BC4J Property jbo.maxpoolcookieage='-1' -->(Configuration) from System Default
[71] BC4J Property PoolClassName='oracle.jbo.common.ampool.ApplicationPoolImpl' -->(Configuration) from System Default
[72] BC4J Property jbo.maxpoolsize='2147483647' -->(Configuration) from System Default
[73] BC4J Property jbo.initpoolsize='0' -->(Configuration) from System Default
[74] BC4J Property jbo.poolrequesttimeout='30000' -->(Configuration) from System Default
[75] BC4J Property jbo.poolmonitorsleepinterval='600000' -->(Configuration) from System Default
[76] BC4J Property jbo.poolminavailablesize='5' -->(Configuration) from System Default
[77] BC4J Property jbo.poolmaxavailablesize='25' -->(Configuration) from System Default
[78] BC4J Property jbo.poolmaxinactiveage='600000' -->(Configuration) from System Default
[79] BC4J Property RELEASE_MODE='Stateful' -->(MetaObjectManager) from System Default
[80] BC4J Property jbo.assoc.consistent='true' -->(MetaObjectManager) from System Default
[81] BC4J Property jbo.viewlink.consistent='false' -->(MetaObjectManager) from /oracle/jbo/server/jboserver.properties resource
[82] BC4J Property jbo.passivation.TrackInsert='true' -->(MetaObjectManager) from System Default
[83] Skipping empty Property jbo.ViewCriteriaAdapter from System Default
[84] BC4J Property jbo.SQLBuilder='Oracle' -->(MetaObjectManager) from /oracle/jbo/server/jboserver.properties resource
[85] BC4J Property jbo.ConnectionPoolManager='oracle.jbo.server.ConnectionPoolManagerImpl' -->(MetaObjectManager) from System Default
[86] BC4J Property jbo.TypeMapEntries='Oracle' -->(MetaObjectManager) from /oracle/jbo/server/jboserver.properties resource
[87] Skipping empty Property jbo.sql92.JdbcDriverClass from System Default
[88] BC4J Property jbo.sql92.LockTrailer='FOR UPDATE' -->(MetaObjectManager) from System Default
[89] BC4J Property jbo.jdbc.trace='false' -->(MetaObjectManager) from System Default
[90] BC4J Property jbo.sql92.DbTimeQuery='select sysdate from dual' -->(MetaObjectManager) from System Default
[91] BC4J Property oracle.jbo.defineColumnLength='as_chars' -->(MetaObjectManager) from System Default
[92] Skipping empty Property jbo.tmpdir from System Default
[93] Skipping empty Property jbo.server.internal_connection from System Default
[94] Skipping empty Property SessionClass from System Default
[95] Skipping empty Property TransactionFactory from System Default
[96] BC4J Property jbo.debugoutput='console' -->(Diagnostic) from System Property
[97] BC4J Property jbo.debug.prefix='DBG: ' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[98] BC4J Property jbo.logging.show.timing='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[99] BC4J Property jbo.logging.show.function='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[100] BC4J Property jbo.logging.show.level='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[101] BC4J Property jbo.logging.show.linecount='true' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[102] BC4J Property jbo.logging.trace.threshold='6' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[103] BC4J Property jbo.jdbc.driver.verbose='false' -->(Diagnostic) from System Default
[104] Skipping empty Property oracle.home from System Default
[105] Skipping empty Property oc4j.name from System Default
[106] BC4J Property jbo.ejb.txntimeout='1830' -->(SessionImpl) from System Default
[107] BC4J Property jbo.ejb.txntype='global' -->(SessionImpl) from System Default
[108] BC4J Property jbo.ejb.txn.disconnect_on_completion='false' -->(SessionImpl) from System Default
[109] Skipping empty Property oracle.jbo.schema from System Default
[110] BC4J Property jbo.xml.validation='false' -->(MetaObjectManager) from System Default
[111] BC4J Property ord.RetrievePath='ordDeliverMedia' -->(MetaObjectManager) from System Default
[112] BC4J Property ord.HttpMaxMemory='102400' -->(MetaObjectManager) from System Default
[113] Skipping empty Property ord.HttpTempDir from System Default
[114] BC4J Property ord.wmp.classid='clsid:22D6F312-B0F6-11D0-94AB-0080C74C7E95' -->(MetaObjectManager) from System Default
[115] BC4J Property ord.qp.classid='clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B' -->(MetaObjectManager) from System Default
[116] BC4J Property ord.rp.classid='clsid:CFCDAA03-8BE4-11cf-B84B-0020AFBBCCFA' -->(MetaObjectManager) from System Default
[117] BC4J Property ord.wmp.codebase='http://activex.microsoft.com/activex/controls/mplayer/en/nsmp2inf.cab#Version=5,1,52,701' -->(MetaObjectManager) from System Default
[118] BC4J Property ord.qp.codebase='http://www.apple.com/qtactivex/qtplugin.cab' -->(MetaObjectManager) from System Default
[119] Skipping empty Property ord.rp.codebase from System Default
[120] BC4J Property ord.wmp.plugins.page='http://www.microsoft.com/isapi/redir.dll?prd=windows&sbp=mediaplayer&ar=Media&sba=Plugin&' -->(MetaObjectManager) from System Default
[121] BC4J Property ord.qp.plugins.page='http://www.apple.com/quicktime/download/' -->(MetaObjectManager) from System Default
[122] BC4J Property ord.rp.plugins.page='http://www.real.com/player/' -->(MetaObjectManager) from System Default
[123] BC4J Property jbo.security.enforce='None' -->(SessionImpl) from System Default
[124] BC4J Property jbo.security.loginmodule='oracle.security.jazn.tools.Admintool' -->(SessionImpl) from System Default
[125] BC4J Property jbo.server.useNullDbTransaction='false' -->(SessionImpl) from System Default
[126] Copying unknown Client property (DBconnection='jdbc:oracle:thin:@cdsvandromeda:1521:dctm') to session
[127] Copying unknown Client property (password='kitbordo') to session
[128] Copying unknown Client property (JDBCName='Kitbordo') to session
[129] Copying unknown Client property (jbo.jndi.use_default_context='true') to session
[130] Copying unknown Client property (user='kitbordo') to session
[131] Copying unknown Client property (jbo.applicationmoduleclassname='br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.CadastroDeManutencaoModule') to session
[132] Copying unknown Client property (ApplicationName='br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.CadastroDeManutencaoModule') to session
[133] WARNING: Unused property: LC='Calling Function' found in /oracle/jbo/common/Diagnostic.properties resource
[134] }} finished loading BC4J properties
[135] -----------------------------------------------------------
Diagnostics: (Properties (re)loaded) Routing diagnostics to standard output (use -Djbo.debugoutput=silent to remove)
[136] Diagnostic Properties: Timing:false Functions:false Linecount:true Threshold:6
[137] JavaVMVersion: 1.4.1_01-b01
[138] JavaVMVendor: Sun Microsystems Inc.
[139] JavaVMName: Java HotSpot(TM) Client VM
[140] OperatingSystemName: Windows 2000
[141] OperatingSystemVersion: 5.0
[142] OperatingSystemUsername: Lbueno
[143] Jbo323Compatible Flag: false, str: false
[144] Loading from Sinalizacao.jpx file
[145] Loading from indvidual XML files
[146] Loading the Containees for the Package 'Sinalizacao.Sinalizacao'.
[147] Connected to Oracle JBO Server - Version: 9.0.3.11.88
[148] BC4J: Instrumentation disabled
[149] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/service/service.xml file
[150] Loading from indvidual XML files
[151] Loading the Containees for the Package 'br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.service'.
[152] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/service/CadastroDeManutencaoModule.xml file
[153] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/view.xml file
[154] Loading from indvidual XML files
[155] Loading the Containees for the Package 'br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.view'.
[156] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/TipoManutencaoBoiaView.xml file
[157] ViewObjectImpl's default fetch mode = 0
[158] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/entity.xml file
[159] Loading from indvidual XML files
[160] Loading the Containees for the Package 'br.com.cvrd.logistica.kitbordo.sinalizacao.model.entity.entity'.
[161] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/TipoManutencaoBoiaEntity.xml file
[162] Loading Typemap entries from oracle.jbo.common.OracleTypeMapEntries
[163] Stringmanager using default locale: 'pt_BR'
[164] CSMessageBundle (language base) being initialized
[165] OracleSQLBuilder reached getInterface
[166] Oracle SQL Builder Version 3.2.0.0.0
[167] ViewRowSetImpl's jbo.viewlink.consistent = false (0)
[168] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/BoiasPorCanalView.xml file
[169] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/BoiaEntity.xml file
[170] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/HistoricoManutencaoBoiaView.xml file
[171] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/HistoricoManutencaoBoiaEntity.xml file
[172] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/ManutencaoBoiaView.xml file
[173] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/ManutencaoBoiaEntity.xml file
[174] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/ManutencaoBoiaViewLink.xml file
[175] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/ManutencaoBoiaAssociation.xml file
[176] Using DatabaseTransactionFactory implementation oracle.jbo.server.DatabaseTransactionFactory
[177] mUsePersColl is false
[178] ViewObjectImpl.mDefaultMaxRowsPerNode is 70
[179] ViewObjectImpl.mDefaultMaxActiveNodes is 30
[180] DBTransactionImpl Max Cursors is 50
[181] Created root application module: 'br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.CadastroDeManutencaoModule'
[182] Locale is: 'pt_BR'
[183] DefaultConnectionStrategy is establishing an application module connection
[184] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[185] Creating a new pool resource
[186] Trying connection/2: url='jdbc:oracle:thin:@cdsvandromeda:1521:dctm' info='{user=kitbordo, password=kitbordo}' ...
[187] Successfully logged in
[188] JDBCDriverVersion: 9.0.1.4.0
[189] DatabaseProductName: Oracle
[190] DatabaseProductVersion: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production With the Partitioning, OLAP and Oracle Data Mining options JServer Release 9.2.0.1.0 - Production
[191] **PCollManager.resolveName** tabName=PS_TXN
[192] **retrieve** id=-1, collid=6838, keyonly=falseGetting a connection for internal use...
[193] Creating internal connection...
[194] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[195] Creating a new pool resource
[196] Trying connection/2: url='jdbc:oracle:thin:@cdsvandromeda:1521:dctm' info='{user=kitbordo, password=kitbordo, dll=ocijdbc9, protocol=thin}' ...
[197] , parid=0, ret=oracle.jdbc.driver.OracleBlobInputStream
[198] stmt: select parentId, content from "PS_TXN" where id=:1 and collid=:2
[199] **retrieve** id=1, collid=6838, keyonly=false, parid=-1, ret=oracle.jdbc.driver.OracleBlobInputStream
[200] stmt: select parentId, content from "PS_TXN" where id=:1 and collid=:2
[201] Clearing VO cache for TipoManutencaoBoiaView
[202] Clear QueryCollection in cache...
[203] Clearing VO cache for BoiasPorCanalView
[204] Clear QueryCollection in cache...
[205] Clearing VO cache for HistoricoManutencaoBoiaView
[206] Clear QueryCollection in cache...
[207] Getting a connection for internal use...
[208] Creating internal connection...
[209] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[210] Clearing VO cache for BoiasPorCanalView
[211] Clear QueryCollection in cache...
07/09/2004 12:07:51 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.actions.LocalStrings', returnNull=true
[212] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/HistoricoManutencaoViewLink.xml file
[213] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/HistoricoDeManutencaoDeBoiaAssociation.xml file
[214] Column count: 23
[215] ViewObject : Created new QUERY statement
[216] SELECT Boia.H55SCANA, Boia.H55CODBO, Boia.H55LATGR, Boia.H55LATMI, Boia.H55LATSE, Boia.H55INDLA, Boia.H55VALEX, Boia.H55LONGR, Boia.H55LONMI, Boia.H55LONSE, Boia.H55INDLO, Boia.H55VALEY, Boia.H55CORLP, Boia.H55REMOV, Boia.H55NRORD, Boia.H55PROJE, Boia.H55PINTU, Boia.H55CARAC, Boia.H55EQLUM, Boia.H55FOLUM, Boia.H55EQFUN, Boia.H55EQMON FROM H55BOIAT Boia WHERE Boia.H55SCANA = :1
[217] Binding param 1: 21
[218] Clearing VO cache for TipoManutencaoBoiaView
[219] Clear QueryCollection in cache...
[220] Column count: 2
[221] ViewObject : Created new QUERY statement
[222] SELECT TipoManutencaoBoiaEntity.H5PSTPMB, TipoManutencaoBoiaEntity.H5PNOMAN FROM H5PTPMBT TipoManutencaoBoiaEntity ORDER BY TipoManutencaoBoiaEntity.H5PNOMAN ASC
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.bean.LocalStrings', returnNull=true
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
[223] Application Module failover is enabled
[224] Getting a connection for internal use...
[225] Creating internal connection...
[226] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[227] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" im="1" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.logic.LocalStrings', returnNull=true
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[228] **insert** id=1, parid=-1, collid=6844, keyArr.len=-1, cont.len=1043
[229] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[230] **commit** #pending ops=1
[231] **insert** id=-1, parid=0, collid=6844, keyArr.len=-1, cont.len=665
[232] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[233] **commit** #pending ops=1
[234] Getting a connection for internal use...
[235] Creating internal connection...
[236] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[237] **deleteAll** collid=6838
[238] stmt: delete "PS_TXN" where collid=:1
[239] **commit** #pending ops=1
[240] Reusing a cached session application module instance
[241] Getting a connection for internal use...
[242] Creating internal connection...
[243] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[244] Column count: 5
[245] ViewObject : Created new QUERY statement
[246] SELECT HistoricoManutencaoBoia.H56CODBO, HistoricoManutencaoBoia.H56DTMAN, HistoricoManutencaoBoia.H56DESCR, HistoricoManutencaoBoia.H56SCANA FROM H56HIMAT HistoricoManutencaoBoia WHERE HistoricoManutencaoBoia.H56CODBO = ? and HistoricoManutencaoBoia.H56SCANA = ?
[247] Binding param 1: XPPP
[248] Binding param 2: 21
[249] Clearing VO cache for HistoricoManutencaoBoiaView
[250] Clear QueryCollection in cache...
[251] Column count: 5
[252] ViewObject : Reusing defined prepared Statement
[253] Binding param 1: XPPP
[254] Binding param 2: 21
[255] Application Module failover is enabled
[256] Getting a connection for internal use...
[257] Creating internal connection...
[258] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[259] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[260] **insert** id=1, parid=-1, collid=6847, keyArr.len=-1, cont.len=1036
[261] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[262] **commit** #pending ops=1
[263] **insert** id=-1, parid=0, collid=6847, keyArr.len=-1, cont.len=665
[264] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[265] **commit** #pending ops=1
[266] Getting a connection for internal use...
[267] Creating internal connection...
[268] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[269] **deleteAll** collid=6844
[270] stmt: delete "PS_TXN" where collid=:1
[271] **commit** #pending ops=1
[272] Reusing a cached session application module instance
[273] Getting a connection for internal use...
[274] Creating internal connection...
[275] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[276] Column count: 6
[277] ViewObject close prepared statements...
[278] ViewObject : Created new QUERY statement
[279] SELECT ManutencaoBoiaEntity.H6ASCANA, ManutencaoBoiaEntity.H6ACODBO, ManutencaoBoiaEntity.H6ADTMAN, ManutencaoBoiaEntity.H6ASTPMB, TipoManutencaoBoiaEntity.H5PSTPMB AS CODIGO_TIPO_MANUTENCAO_BOIA1, TipoManutencaoBoiaEntity.H5PNOMAN FROM H6AMABOT ManutencaoBoiaEntity, H5PTPMBT TipoManutencaoBoiaEntity WHERE (ManutencaoBoiaEntity.H6ASCANA = :1 AND ManutencaoBoiaEntity.H6ACODBO = :2 AND ManutencaoBoiaEntity.H6ADTMAN = :3)
[280] Binding param 1: 21
[281] Binding param 2: XPPP
[282] Binding param 3: 2004-06-02
07/09/2004 12:08:19 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
[283] Application Module failover is enabled
[284] Getting a connection for internal use...
[285] Creating internal connection...
[286] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[287] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDAT07/09/2004 12:08:19 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
07/09/2004 12:08:20 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
A[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[288] **insert** id=1, parid=-1, collid=6849, keyArr.len=-1, cont.len=1036
[289] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[290] **commit** #pending ops=1
[291] **insert** id=-1, parid=0, collid=6849, keyArr.len=-1, cont.len=665
[292] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[293] **commit** #pending ops=1
[294] Getting a connection for internal use...
[295] Creating internal connection...
[296] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[297] **deleteAll** collid=6847
[298] stmt: delete "PS_TXN" where collid=:1
[299] **commit** #pending ops=1
[300] Reusing a cached session application module instance
[301] Getting a connection for internal use...
[302] Creating internal connection...
[303] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[304] OracleSQLBuilder Executing Select on: H56HIMAT (true)
[305] Built select: 'SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity'
[306] Executing LOCK...SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity WHERE H56CODBO=:1 AND H56DTMAN=:2 AND H56SCANA=:3 FOR UPDATE NOWAIT
[307] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/RelatoriosSetorSinalizacaoNauticaBoiaAssociation.xml file
[308] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/RelatorioSetorSinalizacaoNauticaEntity.xml file
[309] OracleSQLBuilder Executing Select on: H55BOIAT (true)
[310] Built select: 'SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity'
[311] Executing LOCK...SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity WHERE H55SCANA=:1 AND H55CODBO=:2 FOR UPDATE NOWAIT
[312] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/TipoManutencaoBoiaAssociation.xml file
[313] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[314] Built select: 'SELECT H6ASCANA, H6ACODBO, H6ADTMAN, H6ASTPMB FROM H6AMABOT ManutencaoBoiaEntity'
[315] Executing LOCK...SELECT H6ASCANA, H6ACODBO, H6ADTMAN, H6ASTPMB FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4 FOR UPDATE NOWAIT
[316] QueryCollection: afterRemove(0)
[317] ViewRowCache: removeReference
[318] ViewRowCache: removeReference
[319] QueryCollection: afterRemove(5)
[320] ViewRowCache: removeReference
[321] ViewRowCache: removeReference
[322] QueryCollection: afterRemove(10)
[323] ViewRowCache: removeReference
[324] ViewRowCache: removeReference
[325] QueryCollection: afterRemove(15)
[326] ViewRowCache: removeReference
[327] ViewRowCache: removeReference
[328] QueryCollection: afterRemove(20)
[329] ViewRowCache: removeReference
[330] ViewRowCache: removeReference
[331] QueryCollection: afterRemove(25)
[332] ViewRowCache: removeReference
[333] ViewRowCache: removeReference
[334] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[335] Reusing prepared LOCK statement
[336] QueryCollection: afterRemove(0)
[337] ViewRowCache: removeReference
[338] ViewRowCache: removeReference
[339] QueryCollection: afterRemove(4)
[340] ViewRowCache: removeReference
[341] ViewRowCache: removeReference
[342] QueryCollection: afterRemove(8)
[343] ViewRowCache: removeReference
[344] ViewRowCache: removeReference
[345] QueryCollection: afterRemove(12)
[346] ViewRowCache: removeReference
[347] ViewRowCache: removeReference
[348] QueryCollection: afterRemove(16)
[349] ViewRowCache: removeReference
[350] ViewRowCache: removeReference
[351] QueryCollection: afterRemove(20)
[352] ViewRowCache: removeReference
[353] ViewRowCache: removeReference
[354] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[355] Reusing prepared LOCK statement
[356] QueryCollection: afterRemove(0)
[357] ViewRowCache: removeReference
[358] ViewRowCache: removeReference
[359] QueryCollection: afterRemove(3)
[360] ViewRowCache: removeReference
[361] ViewRowCache: removeReference
[362] QueryCollection: afterRemove(6)
[363] ViewRowCache: removeReference
[364] ViewRowCache: removeReference
[365] QueryCollection: afterRemove(9)
[366] ViewRowCache: removeReference
[367] ViewRowCache: removeReference
[368] QueryCollection: afterRemove(12)
[369] ViewRowCache: removeReference
[370] ViewRowCache: removeReference
[371] QueryCollection: afterRemove(15)
[372] ViewRowCache: removeReference
[373] ViewRowCache: removeReference
[374] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[375] Reusing prepared LOCK statement
[376] QueryCollection: afterRemove(0)
[377] ViewRowCache: removeReference
[378] ViewRowCache: removeReference
[379] QueryCollection: afterRemove(2)
[380] ViewRowCache: removeReference
[381] ViewRowCache: removeReference
[382] QueryCollection: afterRemove(4)
[383] ViewRowCache: removeReference
[384] ViewRowCache: removeReference
[385] QueryCollection: afterRemove(6)
[386] ViewRowCache: removeReference
[387] ViewRowCache: removeReference
[388] QueryCollection: afterRemove(8)
[389] ViewRowCache: removeReference
[390] ViewRowCache: removeReference
[391] QueryCollection: afterRemove(10)
[392] ViewRowCache: removeReference
[393] ViewRowCache: removeReference
[394] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[395] Reusing prepared LOCK statement
[396] QueryCollection: afterRemove(0)
[397] ViewRowCache: removeReference
[398] ViewRowCache: removeReference
[399] QueryCollection: afterRemove(1)
[400] ViewRowCache: removeReference
[401] ViewRowCache: removeReference
[402] QueryCollection: afterRemove(2)
[403] ViewRowCache: removeReference
[404] ViewRowCache: removeReference
[405] QueryCollection: afterRemove(3)
[406] ViewRowCache: removeReference
[407] ViewRowCache: removeReference
[408] QueryCollection: afterRemove(4)
[409] ViewRowCache: removeReference
[410] ViewRowCache: removeReference
[411] QueryCollection: afterRemove(5)
[412] ViewRowCache: removeReference
[413] ViewRowCache: removeReference
[414] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[415] Reusing prepared LOCK statement
[416] QueryCollection: afterRemove(0)
[417] ViewRowCache: removeReference
[418] ViewRowCache: removeReference
[419] QueryCollection: afterRemove(0)
[420] ViewRowCache: removeReference
[421] ViewRowCache: removeReference
[422] QueryCollection: afterRemove(0)
[423] ViewRowCache: removeReference
[424] ViewRowCache: removeReference
[425] QueryCollection: afterRemove(0)
[426] ViewRowCache: removeReference
[427] ViewRowCache: removeReference
[428] QueryCollection: afterRemove(0)
[429] ViewRowCache: removeReference
[430] ViewRowCache: removeReference
[431] QueryCollection: afterRemove(0)
[432] ViewRowCache: removeReference
[433] ViewRowCache: removeReference
[434] OracleSQLBuilder Executing DML on: H56HIMAT (Atualizar)
[435] BEGIN UPDATE H56HIMAT HistoricoManutencaoBoiaEntity SET H56CODBO=:1,H56DTMAN=:2,H56DESCR=:3 WHERE H56CODBO=:4 AND H56DTMAN=:5 AND H56SCANA=:6 RETURNING H56CODBO INTO :7; END;
[436] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[437] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[438] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[439] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[440] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[441] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[442] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[443] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[444] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[445] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[446] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[447] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[448] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[449] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[450] TipoManutencaoBoiaView notify COMMIT ...
[451] BoiasPorCanalView notify COMMIT ...
[452] HistoricoManutencaoBoiaView notify COMMIT ...
[453] ManutencaoBoiaEntity_ManutencaoBoiaAssociation_ManutencaoBoiaView notify COMMIT ...
[454] EntityCache close prepared statement
[455] EntityCache close prepared statement
[456] EntityCache close prepared statement
[457] Clearing VO cache for BoiasPorCanalView
[458] Clear QueryCollection in cache...
[459] Column count: 23
[460] ViewObject : Reusing defined prepared Statement
[461] Binding param 1: 21
[462] Clearing VO cache for TipoManutencaoBoiaView
[463] Clear QueryCollection in cache...
[464] Column count: 2
[465] ViewObject : Reusing defined prepared Statement
[466] Application Module failover is enabled
[467] Getting a connection for internal use...
[468] Creating internal connection...
[469] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[470] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[471] **insert** id=1, parid=-1, collid=6850, keyArr.len=-1, cont.len=1036
[472] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[473] **commit** #pending ops=1
[474] **insert** id=-1, parid=0, collid=6850, keyArr.len=-1, cont.len=665
[475] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[476] **commit** #pending ops=1
[477] Getting a connection for internal use...
[478] Creating internal connection...
[479] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[480] **deleteAll** collid=6849
[481] stmt: delete "PS_TXN" where collid=:1
[482] **commit** #pending ops=1
[483] Reusing a cached session application module instance
[484] Getting a connection for internal use...
[485] Creating internal connection...
[486] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[487] Application Module failover is enabled
[488] Getting a connection for internal use...
[489] Creating internal connection...
[490] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[491] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[492] **insert** id=1, parid=-1, collid=6851, keyArr.len=-1, cont.len=1036
[493] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[494] **commit** #pending ops=1
[495] **insert** id=-1, parid=0, collid=6851, keyArr.len=-1, cont.len=665
[496] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[497] **commit** #pending ops=1
[498] Getting a connection for internal use...
[499] Creating internal connection...
[500] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[501] **deleteAll** collid=6850
[502] stmt: delete "PS_TXN" where collid=:1
[503] **commit** #pending ops=1
[504] Reusing a cached session application module instance
[505] Getting a connection for internal use...
[506] Creating internal connection...
[507] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[508] OracleSQLBuilder Executing Select on: H56HIMAT (true)
[509] Built select: 'SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity'
[510] Executing LOCK...SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity WHERE H56CODBO=:1 AND H56DTMAN=:2 AND H56SCANA=:3 FOR UPDATE NOWAIT
[511] OracleSQLBuilder Executing Select on: H55BOIAT (true)
[512] Built select: 'SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity'
[513] Executing LOCK...SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity WHERE H55SCANA=:1 AND H55CODBO=:2 FOR UPDATE NOWAIT
[514] OracleSQLBuilder Executing DML on: H56HIMAT (Atualizar)
[515] BEGIN UPDATE H56HIMAT HistoricoManutencaoBoiaEntity SET H56CODBO=:1,H56DTMAN=:2,H56DESCR=:3 WHERE H56CODBO=:4 AND H56DTMAN=:5 AND H56SCANA=:6 RETURNING H56CODBO INTO :7; END;
[516] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[517] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[518] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[519] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[520] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[521] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[522] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[523] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[524] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[525] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[526] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[527] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[528] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[529] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[530] TipoManutencaoBoiaView notify COMMIT ...
[531] BoiasPorCanalView notify COMMIT ...
[532] HistoricoManutencaoBoiaView notify COMMIT ...
[533] ManutencaoBoiaEntity_ManutencaoBoiaAssociation_ManutencaoBoiaView notify COMMIT ...
[534] EntityCache close prepared statement
[535] EntityCache close prepared statement
[536] Clearing VO cache for BoiasPorCanalView
[537] Clear QueryCollection in cache...
[538] Column count: 23
[539] ViewObject : Reusing defined prepared Statement
[540] Binding param 1: 21
[541] Clearing VO cache for TipoManutencaoBoiaView
[542] Clear QueryCollection in cache...
[543] Column count: 2
[544] ViewObject : Reusing defined prepared Statement
[545] Application Module failover is enabled
[546] Getting a connection for internal use...
[547] Creating internal connection...
[548] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[549] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[550] **insert** id=1, parid=-1, collid=6853, keyArr.len=-1, cont.len=1036
[551] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[552] **commit** #pending ops=1
[553] **insert** id=-1, parid=0, collid=6853, keyArr.len=-1, cont.len=665
[554] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[555] **commit** #pending ops=1
[556] Getting a connection for internal use...
[557] Creating internal connection...
[558] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[559] **deleteAll** collid=6851
[560] stmt: delete "PS_TXN" where collid=:1
[561] **commit** #pending ops=1
[562] Reusing a cached session application module instance
[563] Getting a connection for internal use...
[564] Creating internal connection...
[565] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[566] Application Module failover is enabled
[567] Getting a connection for internal use...
[568] Creating internal connection...
[569] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[570] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[571] **insert** id=1, parid=-1, collid=6854, keyArr.len=-1, cont.len=1036
[572] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[573] **commit** #pending ops=1
[574] **insert** id=-1, parid=0, collid=6854, keyArr.len=-1, cont.len=665
[575] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[576] **commit** #pending ops=1
[577] Getting a connection for internal use...
[578] Creating internal connection...
[579] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[580] **deleteAll** collid=6853
[581] stmt: delete "PS_TXN" where collid=:1
[582] **commit** #pending ops=1
[583] Reusing a cached session application module instance
[584] Getting a connection for internal use...
[585] Creating internal connection...
[586] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[587] OracleSQLBuilder Executing Select on: H56HIMAT (true)
[588] Built select: 'SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity'
[589] Executing LOCK...SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity WHERE H56CODBO=:1 AND H56DTMAN=:2 AND H56SCANA=:3 FOR UPDATE NOWAIT
[590] OracleSQLBuilder Executing Select on: H55BOIAT (true)
[591] Built select: 'SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity'
[592] Executing LOCK...SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity WHERE H55SCANA=:1 AND H55CODBO=:2 FOR UPDATE NOWAIT
[593] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[594] Built select: 'SELECT H6ASCANA, H6ACODBO, H6ADTMAN, H6ASTPMB FROM H6AMABOT ManutencaoBoiaEntity'
[595] Executing LOCK...SELECT H6ASCANA, H6ACODBO, H6ADTMAN, H6ASTPMB FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4 FOR UPDATE NOWAIT
[596] QueryCollection: afterRemove(0)
[597] ViewRowCache: removeReference
[598] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[599] Reusing prepared LOCK statement
[600] QueryCollection: afterRemove(0)
[601] ViewRowCache: removeReference
[602] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[603] Reusing prepared LOCK statement
[604] QueryCollection: afterRemove(0)
[605] ViewRowCache: removeReference
[606] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[607] Reusing prepared LOCK statement
[608] QueryCollection: afterRemove(0)
[609] ViewRowCache: removeReference
[610] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[611] Reusing prepared LOCK statement
[612] QueryCollection: afterRemove(0)
[613] ViewRowCache: removeReference
[614] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[615] Reusing prepared LOCK statement
[616] QueryCollection: afterRemove(0)
[617] ViewRowCache: removeReference
[618] OracleSQLBuilder Executing DML on: H56HIMAT (Atualizar)
[619] BEGIN UPDATE H56HIMAT HistoricoManutencaoBoiaEntity SET H56CODBO=:1,H56DTMAN=:2,H56DESCR=:3 WHERE H56CODBO=:4 AND H56DTMAN=:5 AND H56SCANA=:6 RETURNING H56CODBO INTO :7; END;
[620] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[621] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[622] TipoManutencaoBoiaView notify COMMIT ...
[623] BoiasPorCanalView notify COMMIT ...
[624] HistoricoManutencaoBoiaView notify COMMIT ...
[625] ManutencaoBoiaEntity_ManutencaoBoiaAssociation_ManutencaoBoiaView notify COMMIT ...
[626] EntityCache close prepared statement
[627] EntityCache close prepared statement
[628] EntityCache close prepared statement
[629] Clearing VO cache for BoiasPorCanalView
[630] Clear QueryCollection in cache...
[631] Column count: 23
[632] ViewObject : Reusing defined prepared Statement
[633] Binding param 1: 21
[634] Clearing VO cache for TipoManutencaoBoiaView
[635] Clear QueryCollection in cache...
[636] Column count: 2
[637] ViewObject : Reusing defined prepared Statement
[638] Application Module failover is enabled
[639] Getting a connection for internal use...
[640] Creating internal connection...
[641] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[642] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[643] **insert** id=1, parid=-1, collid=6855, keyArr.len=-1, cont.len=1036
[644] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[645] **commit** #pending ops=1
[646] **insert** id=-1, parid=0, collid=6855, keyArr.len=-1, cont.len=665
[647] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[648] **commit** #pending ops=1
[649] Getting a connection for internal use...
[650] Creating internal connection...
[651] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[652] **deleteAll** collid=6854
[653] stmt: delete "PS_TXN" where collid=:1
[654] **commit** #pending ops=1
[655] Reusing a cached session application module instance
[656] Getting a connection for internal use...
[657] Creating internal connection...
[658] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[659] Application Module failover is enabled
[660] Getting a connection for internal use...
[661] Creating internal connection...
[662] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[663] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[664] **insert** id=1, parid=-1, collid=6856, keyArr.len=-1, cont.len=1036
[665] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[666] **commit** #pending ops=1
[667] **insert** id=-1, parid=0, collid=6856, keyArr.len=-1, cont.len=665
[668] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[669] **commit** #pending ops=1
[670] Getting a connection for internal use...
[671] Creating internal connection...
[672] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[673] **deleteAll** collid=6855
[674] stmt: delete "PS_TXN" where collid=:1
[675] **commit** #pending ops=1
[676] Reusing a cached session application module instance
[677] Getting a connection for internal use...
[678] Creating internal connection...
[679] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[680] OracleSQLBuilder Executing Select on: H56HIMAT (true)
[681] Built select: 'SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity'
[682] Executing LOCK...SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity WHERE H56CODBO=:1 AND H56DTMAN=:2 AND H56SCANA=:3 FOR UPDATE NOWAIT
[683] OracleSQLBuilder Executing Select on: H55BOIAT (true)
[684] Built select: 'SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity'
[685] Executing LOCK...SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity WHERE H55SCANA=:1 AND H55CODBO=:2 FOR UPDATE NOWAIT
[686] EntityCache:add WARNING - a new row with a key equal to a removed row
[687] EntityCache:add WARNING - a new row with a key equal to a removed row
[688] EntityCache:add WARNING - a new row with a key equal to a removed row
[689] EntityCache:add WARNING - a new row with a key equal to a removed row
[690] EntityCache:add WARNING - a new row with a key equal to a removed row
[691] EntityCache:add WARNING - a new row with a key equal to a removed row
[692] OracleSQLBuilder Executing DML on: H56HIMAT (Atualizar)
[693] BEGIN UPDATE H56HIMAT HistoricoManutencaoBoiaEntity SET H56CODBO=:1,H56DTMAN=:2,H56DESCR=:3 WHERE H56CODBO=:4 AND H56DTMAN=:5 AND H56SCANA=:6 RETURNING H56CODBO INTO :7; END;
[694] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[695] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[696] OracleSQLBuilderImpl.doEntityDML failed...
[697] X/Open SQL State is: 23000
[698] java.sql.SQLException: ORA-00001: restrição exclusiva (KITBORDO.PK_H6AMABOT) violada
ORA-06512: em line 1
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:187)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:241)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1477)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:888)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2004)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1924)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2562)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:452)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:526)
at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:370)
Hi Sung, Thanks for your reply.
Leonardo:
If I understand your msg correctly, I'm wondering if
the data model as you described is complete.
You state that you have MaintenanceType, Maintenance,
and MaintenanceOrder, but don't you need
MaintenanceOrderLine?MaintenanceOrderLine is what I'm calling Maintenance. A Maintenace record is used just to link a MaintenanceOrder to a MaintenanceType
>
Otherwise, you say that you removed all Maintenance's
in step 2). How did you form a list of all
Maintenance's in step 4)? How do you form this
list?
was raised due to unique constraint violationAt step 3) I'm using a view object, MaintenanceTypeView, to create a list of checkboxes, one for each MaintenanceType.
At step 4), for each MaintenanceType selected in the form, I'm creating a new Maintenance using:
//All codes of maintenance types, that already have a
//respective maintenance record in the db, have already
//been remove from the maintenancesToInsert list at this
//point
for (Iterator iter = maintenancesToInsert.iterator(); iter.hasNext();) {
MaintenanceViewRow maintenanceRow = (MaintenanceViewRow) maintenanceView.createRow();
maintenanceRow.setMaintenanceTypeCode(Integer.valueOf((String)iter.next()));
maintenanceView.insertRow(maintenanceRow);
>
Sung -
Delete Statement is not working correctly
Hello,
The following delete statement is not working correctly.
If I press delete it will delete everything in the category table
I don't know whats wrong with it.
----delete row from category if there is not infrastructure to support------
IF :P12_DFCY_SEQNO4 IS NOT NULL AND :P12_DFCY_CATG_C = '7' THEN
DELETE FROM DFCY_CATG
WHERE NOT EXISTS(SELECT I.DFCY_SEQNO
FROM DFCY_CATG C, DFCY_CATG_INFRSTRCTR I
WHERE C.DFCY_SEQNO = I.DFCY_SEQNO
AND :P12_DFCY_SEQNO4 = I.DFCY_SEQNO);
end if;
Thanks
MaryHi,
IF :P12_DFCY_SEQNO4 IS NOT NULL AND :P12_DFCY_CATG_C = '7' THEN
DELETE FROM DFCY_CATG
WHERE NOT EXISTS(SELECT I.DFCY_SEQNO
FROM DFCY_CATG C, DFCY_CATG_INFRSTRCTR I
WHERE C.DFCY_SEQNO = I.DFCY_SEQNO
AND :P12_DFCY_SEQNO4 = I.DFCY_SEQNO);
end if;So, if P12_DFCY_SEQNO4 does not exist, then I would expect all records to be deleted because the NOT EXISTS() function would just return TRUE for every record on the table. Somewhere in the statement, I would expect to see something that links between the table being deleted from and the NOT EXISTS() data or, perhaps, using the P12_DFCY_CATG_C value as a filter?
Andy -
Dynamic Select List not displaying correct value
Hi there!
I have a page with a dynamic repeat region.
As I press one record I get up all the details based on id on an edit page.
The problem is that the info that is inserted via a Select List is not displaying correct on edit page.
All the other values are correct, also the values in the repeat region on index page,
but the value from the Select List on edit page is just displaying the initially selected item.
Have tried using SELECT DISTINCT in the SQL statement, but no luck.
Any other ideas?
Cut and paste from form:
<select name="Vegtype" class="ProvDet" id="Vegtype" title="<%=(rsAs.Fields.Item("VegType").Value)%>">
<option value="Ev" selected="selected">Ev</option>
<option value="Fv">Fv</option>
<option value="Rv">Rv</option>
<option value="Kv">Kv</option>
</select>
Recordset
<%
Dim rsAs
Dim rsAs_cmd
Dim rsAs_numRows
Set rsAs_cmd = Server.CreateObject ("ADODB.Command")
rsAs_cmd.ActiveConnection = MM_LabCon_STRING
rsAs_cmd.CommandText = "SELECT DISTINCT DatoM, DatoR, DatoU, Distr, FagFelt, Felt, IntNr, Km, KontrNr, Kontrollor, Masse, MasseBK, Punkt, Resept, TestID, UserID, VegHp, VegNavn, VegNr, VegType FROM tblTest WHERE TestID = ?"
rsAs_cmd.Prepared = true
rsAs_cmd.Parameters.Append rsAs_cmd.CreateParameter("param1", 5, 1, -1, rsAs__MMColParam) ' adDouble
Set rsAs = rsAs_cmd.Execute
rsAs_numRows = 0
%>
Regards,
Christian
DWCS5 | .Asp | MS AccessOk, here goes the top down approach...
In the HTML header of my page, i have this reference to a js file containing the javascript - <script src="#WORKSPACE_IMAGES#108.js" type="text/javascript"></script>
Then in an HTML Region I have the following code to create the divs that will be shown and hidden - <div id="divREGION" class="divs">Select region to get list of countries.</div>
<div id="divCOUNTRY" class="divs">Select country to get list of cities.</div>
<div id="divCITY" class="divs">Select city and then press "Get Employees". </div>
Note that these divs contain static content. You may be able to create dynamic content for these divs by creating dynamic query regions and putting div tags around the region (i havent tried this, it may require template modification).
The select boxes have this code in the "HTML form elements attributes" - onFocus="javascript:showHideDiv(this,true)" onBlur="javascript:showHideDiv(this,false)"
This onFocus and onBlur call the showHideDiv() function, passing in the object reference of the select box and a true/false to show/hide the related div.
The actual javascript function that is contained in the 108.js file is:
function showHideDiv(objThis, inBool){
var divid = "div" + objThis.id.substring(3);
if (inBool) {
ShowDiv(divid);
else {
HideDiv(divid);
That function in turn calls either the ShowDiv() or HideDiv() functions, depending on the true or false, passing in the ID of the div to be changed...
function ShowDiv(divid){
eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "inline"');
function HideDiv(divid){
eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "none"');
Hope this helps. -
Oracle DB Polling Proxy not polling for records concurrently
Problem Description
We have created a Polling Proxy on OSB from a DB Adapter with the below JCA parameters
• PollingStrategy = "LogicalDeletePollingStrategy"
• MarkReadColumn = "STATUS"
• MarkReadValue = "S"
• MarkReservedValue = "R${weblogic.Name-2}-${IP-2}-${instance}"
• MarkUnreadValue = "R"
• PollingInterval = "60"
• MaxRaiseSize = "1"
• MaxTransactionSize = "10"
• NumberOfThreads = "1"
• ReturnSingleResultSet = "false"
The Proxy picks the records when the state change to "R" and updated the state value to "S". When the proxy fails for any reason the State of the record is changed to a Reserved State. When any record is in a reserved State the proxy does not pick other records that are in a State "R" until the row with the Reserved State is removed.
This leaves all the other records un-processed......
Are the JCA configurations correct in our case?
Regards,
Vinay V KrishnanThis may help...
http://javaoraclesoa.blogspot.com.au/search/label/markreservedvalue
Cheers,
Vlad
Maybe you are looking for
-
Email notification to end-user only when both resources are provisioned
Hello Gurus, My client has a requirement where the end-user needs to be sent an email notification as soon as his account gets created in OID and EBS. So the next time when the user logs in; he should be able to access both his accounts. But the emai
-
hi, I have macBook Pro and I insert small CD before a year . today I take out the DVD driver and the got the small CD. I returned back all things as it is. the problem now that DVD driver dose not work at all . the CD can't go inside. I think there i
-
Reader X will not open any PDF
I am running Windows XP SP3 and have just insta lled Reader 10.1.0 and it will not open any PDF's created in earlier versions, and just gives me a Microsoft error messag e any help would be appreciated. have tried repairin gg and uninstalling and re
-
Waveform graph displayed vertically on front panel
Hello everybody I would like to know if it is possible to display waveform graphs vertically on front panel and if enventually could someone tell me how to do it. Thanks vey much for help.
-
I have an iPhone 5s and shattered its screen. I backed up its data to iTunes and manually replaced the screen myself. When I try to turn on the phone, it doesn't turn on. When I plug it into an outlet, it just makes a noise every five seconds. I purc