2LIS_02_ITM : sequence of records in R/3 are coming in BW in reverseway
The sequence of records i can see in R/3(in RSA3) ARE comining in BW in reverse order sequence.
say for Example.
in R/3 i can see the records as
1
2
3
4
where as in BW in PSA
The records are
4
3
2
1
because of that the 4th record is overwritting by the 1st record.
Pl. Help me.
Madhu
Hi,
As per my understanding is that you need to validate the data in R/3 and BW if iam not mistaken then you can built a remote cube on R/3 datasource and i think you will be having basic cube in BW which contains data. now you can built an multicube on both remote and basic cubes and you can have a report on that multicube so that you can compare the data of both R/3 and BW.
Regards,
Malli.M
Similar Messages
-
Hi,
I have a question on the sequence of records returned by Endeca. I am using Endeca 3.1.1. As I understand the following factors that influence this - order in which records are indexed, relevancy rule / sort rule, boost rule. Now what is the precedence followed by Endeca in applyig the above factors? Does Endeca apply the above factors in the following way or is it different?
a) order in which records are indexed
b) boost rule
c) relevancy / sort rule
Thanks
Edited by: 899001 on Apr 15, 2013 8:38 PMIt depends on the Traversal setting you use
http://msdn.microsoft.com/en-us/library/office/microsoft.exchange.webservices.data.foldertraversal(v=exchg.80).aspx eg if you only use a Shallow traversal the folders are returned alphabetically. If you use a Deep traversal the you'll get Folder-Subfolder
alphabetically. The Parent folder will always be returned before the child.
Cheers
Glen -
Delete records from tableA which are not in tableB
Table A contains milions of records which is the best way to delete records from tableA which are not in tableB
delete from tableA where empno not in (select empno from tableb)
or
delete from tableA where empno not exists (select empno from tableb
where b.empno=a.empno)
any helpHi
If you can do this, do with this:
create table tableC
as select a.*
from tableA a,
(select empno from tableA
minus
select empno from tableB) b
where a.empno = b.empno;
drop table tableA;
rename table tableC to tableA;
Ott Karesz
http://www.trendo-kft.hu -
Can i use same customer master record in different sales area
dear sir,
i have created a record of customer master - RAM in sold to party account group using sales area - (I).
(i.e,) XYZ ( sales org ) - A (dis channel ) - XX ( division)
now i have created another record of customer master - DAVID in sold to party acc group using sales area - (II).
(i.e) XYZ (sales org) - A (dis channel ) - YY ( division ).
when i am trying to change SH party function of "RAM" with "DAVID" its throwing an error message that DAVID is not created in Sales Area - (I).
please let me know how to resolve this
regards
vivekHi,
There are two solution to control this.
1) Extend customers in respective sales area. i.e.. DAVID in XYZ-A-XX or RAM in XYZ-A-YY.
2) Define reference sales organisation, channel and division and assign to respective.
EX.
Define sales org. "0000" and assign to all sales orgs.
Define channel "00" and assign to all channels.
Define division "00" and assign to all divisions.
Now create customer masters only in sales area 0000-00-00 and you can use this customer anywhere for any sales area (at transactional level). This is one time activity and will save so much time in creating(or extending) master records in different sales area.
Thanks,
Tarpan -
Sp L records are coming to the PSA and not updating in the data target
Special Ledger records are coming to the PSA and not updating in the data target in the month end and the info package is failing - because of that we are doing manual updating from PSA to the data target -
Can so one can tell the reasons why this is happening? And give the solutions to it?Hi Sankar,
If your Infopackage uses Only PSA and Update subsequently in Data Target on the Processing tab, then you will need to add a process for Read PSA and Update Data Target in your process chain, after the Infopackage load process. Then it will take data from the PSA and load to the data target.
Hope this helps... -
#554 5.4.4 SMTPSEND.DNS.MxLoopback; DNS records for this domain are configured in a loop ##
Hi,
This is my first post here.
My exchange server of late is facing a peculiar problem. I get the error message that I have posted below when sending mails to any outside domain. However when I restart the server the mails can be resend to the address without any issue. After a certain
time again the issue pops up upon which I am forced to restart the server again. I am running 2007 Exchange on Windows 2003.
Generating server: name.mydomain.com
[email protected]
#554 5.4.4 SMTPSEND.DNS.MxLoopback; DNS records for this domain are configured in a loop ##
[email protected]
#554 5.4.4 SMTPSEND.DNS.MxLoopback; DNS records for this domain are configured in a loop ##
Original message headers:
Received: from name.mydomain.com ([1xx.xxx.xxx.xx5]) by MHDMAILS.mouwasat.com
([1xx.xxx.xxx.xx5]) with mapi; Wed, 19 Oct 2011 08:56:29 +0300
From: <[email protected]>
To: <[email protected]>
CC: "Al Alami,Tareq" <[email protected]>
Date: Wed, 19 Oct 2011 08:56:27 +0300
Subject: RE:
Thread-Topic:
Thread-Index: AcyAQ5tu8z9CvBfdT5+1pcGQkk6x0AIuwczAAAGZjeABQyW5sAADeeJQAAETNDA=
Message-ID: <[email protected]>
References: <[email protected]com>
<[email protected]com>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator:
acceptlanguage: en-US
Content-Type: multipart/related;
boundary="_004_EEC8FA6B3B286A4E90D709FECDF51AA06C0588CA11namedomain_";
type="multipart/alternative"
MIME-Version: 1.0On Sun, 23 Oct 2011 15:05:15 +0000, Jobin Jacob wrote:
>
>
>Even af
>
>ter removing my domain from the send connector I continue to receive the error. I would like to say I do have a firewall, Cyberoam. However, it was the same configuration till now in the firewall. I did try Mx lookup and found the following.
>
>Could there be any other solution to this issue ?
Sure, but it's necessary to ask a lot of questions since none of us
know how your organization is set up.
I see you also have "Use the External DNS Lookup settings on the
transport server" box checked. How have you configured the "External
DNS Lookups" on the HT server's property page? Is there any good
reason why you aren't just using your internal DNS servers? If the
internal DNS servers are configured to resolve (or forward) queries
for "external" domains then there's no reason to use that checkbox. In
most cases checking that box is a mistake.
http://technet.microsoft.com/en-us/library/aa997166(EXCHG.80).aspx
The behavior you describe (it works for a while and then fails;
restarting the server returns it to a working state) sure sounds like
some sort of DNS problem.
Rich Matheisen
MCSE+I, Exchange MVP
--- Rich Matheisen MCSE+I, Exchange MVP -
HT4236 How do you keep photos in the same sequence on the iPhone that they are on the PC folder?
How do you keep photos in the same sequence in the iPhone as they are in the folder on the PC??
When I sync my photos they are listed alphabetically (by folder) and within the folders, listed alphabetically again by the name assigned to the photo. The only way I can think of to keep the order that you have in your computer would be to assign a letter as a prefix to each photo. If you have more than 26 photos in a folder, you can double the letters, etc. I think that will keep the photos in the order you want.
-
Error in SWWERRE "No personnel control record exists for accounting area 99"
Dear Experts,
The standard job for restarting of workflows with temporary errors , SWWERRE, has suddenly started failing.
The message obtained in Job Log is "No personnel control record exists for accounting area 99".
The Payroll Control Record for Payroll Area 99 does not exist as it is a non-payroll relevant area.
There has been no change in HCM configuration or Job characteristics.
What could have triggered these sudden failures.
Please suggest.
Regards,
Shilpa A.Hi Shilpa
This is not an issue with the report RSWWERRE (Job SWWERRE).
It must be trying to pickup work items which are in Error State (temporary) - that item may have this data issue - Run Report RSWWERRE from SE38 and debug, you will come to know.
Check if:
1) The error WI belongs to TRIP (BUS2089)
2) Put a break point in FORM SUB_ABRECHNUNG(SAPLHRTR) and run report RSWWERRE (if the work item is still in TEMPORARY ERROR SATE and has not converted to permanent error) ..... debugging should stop there if the above point is correct
3) This will give you the Trip and Employee number - check if the data is consistent (BAPI_TRIP_CHECK_STATUS)
4) This usually happens when you use &TRIP.AVSEXORADAUTHORITYLEVEL& in the binding (of the error step)
if this is true, correct the data and it should work else delete those work items and restart the job (remember to correct the data to avoid future issues).
If not,
still the fist point holds true, "It must be trying to pickup items which are in Error State - that item may have the issue - Run Report RSWWERRE from SE38 and debug, you will come to know." Some errors are deep rooted and cannot be caught by the job
Also check if note 1452535 is relevant for your release.
Regards,
Modak
Message was edited by: Modak Gupta
............Also check thread: ..
http://scn.sap.com/thread/2021322 -
Displaying the records records which are coming more than once
hi
create table temp(comp_id int,branch_id int);
comp_id | branch_id
---------+-----------
1000 | 1
1000 | 1
1000 | 2
1000 | 2
1000 | 3
2000 | 1
2000 | 1
2000 | 2
2000 | 3
how can i write a query which displays the records records which are coming more than once on the basis of fields comp_id and branch_id. e.g. 1000 | 1 should be displayed because it is coming more than once. 1000 | 3 should not be, because it has a single entry.select comp_id, branch_id, count(*)
from temp
group by comp_id, branch_id
having count(*)>1
Please note this forum is not a SQL class and it is not the place to have your homework done.
Sybrand Bakker
Senior Oracle DBA -
Do macs keep a record of what files are copied to an external hard drive?
Is it possible to set up a MacBook to keep a record of what files are copied to an external hard drive?
Start up in safe mode and log in to the account with the problem. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
Safe mode is much slower to start up and run than normal. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
You may now be able to log in and move the files off the Desktop. Then restart as usual. -
File names are coming wrong in Put place.
Hi all,
I have some issues in file transfer.. I need to transfer file from one location to another location using BPEL FTP adapters (Get and Put).
I done the all the necessary steps to tranfer files....
I have some files in get directory (SMANJ.TXT, SMANY.TXT,SMACA.TXT) i want to transfer all files into my Put directory.
I have some more files in get directory on dirrenet format (SM_NJ.TXT, SM_NNY.TXT) I want to transfer all files into my Put directory.
I passed the Get file name pattern is :- SMA*.TXT
and Passed Put file name pattern is :- SMA%SEQ%.TXT
Finally files are moving from location to location.............. But file name is showing SMA1.TXT, SMA2.TXT,SMA3.txt.. This is wrong.
I want to transfer all 3 files.... Whatever file is existing is GET....Can you help me to resolve this issue.
Regards
Venkat
Edited by: user10263255 on Sep 24, 2008 10:31 AMHi Dipal,
Here i am sending step by step.. How I am done my project..
Please look into that..
1) Opened New project in --> File -- New -- general -- projects -- BPEL Process Project
2) Entered the Process name and Select the template as Empty BPEL Process. -- Empty BPEL project was created.
3) Click on the Receive activity --> Click on the partner link --> Create an Object --> Clicked on Define Adapter Services
--> Adapter Configuration Wizard - Welcome wincodw opened --> Click on Next --> Given Service name --> Given JNDI name
--> File type ASCII and Operation type -- Getfile selected --> Given directory name --> Name patterns are (File Wildcards - SMA*.TXT)
--> Check the checkbox of Native format translation is not required -- Finish
4) created another partner link for Put --> Here given file name format is SMA%SEQ%.TXT
5) Applyed the Partnerlink and Operation and Click on Auto-Create Variable and Check the Create Instance check box.
6) clicked on Browse variables in Receive General page --> Created InboundHeader_msg and OutboundHeader_msg variables
7) Applied the Inboundheader variable in Receive Adapters page.
8) Same way I done for Invoke
9) Added the Assign variable --> create the copy operation --> given --> From is Receive and To to Invoke.
10) I deployed the Process.
11) Files are coming in SMA1.TXT, SMA2.TXT,SMA3.txt sequence
Please help me to resolve the issue.
Regards
Venkat -
The result list for activities is empty but items are coming but invisible.
Hi ,
The result list for activities is empty / blank - nothing shown at all. but the line items are coming but all are invisible.
please guide me to find the root cause of this issue.
Thanks,
Prem.Hi Rene,
When I am click on 'Search' , the view area is created but records are not being displayed. I checked in the background and data is being fetched.
Moreover, When I am copying one line item(which is viewed blank after the search being performed but has data) and after saving press 'previous' all the records are being displayed.
Do you have any idea on this? Can you share your ID , I can mail you the screenshot .
Thanks,
Prem
Edited by: prem kumar on Jun 7, 2010 1:17 PM -
Only 274 mails are coming when using pop3 with java mail
Only 274 mails are coming from GMAIL when using pop3 with java mail. but there are more than 3000 mails.
I'm not getting the reason, code is given below:
public static void main(String[] args) {
// SUBSTITUTE YOUR ISP's POP3 SERVER HERE!!!
// String host = "pop.bizmail.yahoo.com";
// final String user = "[email protected]";
// final String password = "xxx";
String host = "pop.gmail.com";
final String user = "gauravjlj";
final String password = "xxx";
String subjectSubstringToSearch = "Test E-Mail through Java";
try {
Properties prop = new Properties();
prop.setProperty("mail.pop3.socketFactory.class",
"javax.net.ssl.SSLSocketFactory");
prop.setProperty("mail.pop3.socketFactory.fallback", "false");
prop.setProperty("mail.pop3.port", "995");
prop.setProperty("mail.pop3.socketFactory.port", "995");
prop.put("mail.pop3.host", host);
prop.put("mail.store.protocol", "pop3");
Session session = Session.getDefaultInstance(prop);
Store store = session.getStore();
System.out.println("your ID is : "+ user);
System.out.println("Connecting...");
store.connect(host, user, password);
System.out.println("Connected...");
// Get "INBOX"
Folder fldr = store.getFolder("INBOX");
fldr.open(Folder.READ_ONLY);
int count = fldr.getMessageCount();
System.out.println(count + " total messages");
// Message numebers start at 1
for(int i = 1; i <= count; i++) {
// Get a message by its sequence number
Message m = fldr.getMessage(i);
// Get some headers
Date date = m.getSentDate();
Address [] from = m.getFrom();
String subj = m.getSubject();
String mimeType = m.getContentType();
System.out.println(date + "\t" + from[0] + "\t" +
subj + "\t" + mimeType);
// Search for e-mails by some subject substring
String pattern = subjectSubstringToSearch;
SubjectTerm st = new SubjectTerm(pattern);
// Get some message references
Message [] found = fldr.search(st);
System.out.println(found.length +
" messages matched Subject pattern \"" +
pattern + "\"");
for (int i = 0; i < found.length; i++) {
Message m = found;
// Get some headers
Date date = m.getSentDate();
Address [] from = m.getFrom();
String subj = m.getSubject();
String mimeType = m.getContentType();
System.out.println(date + "\t" + from[0] + "\t" +
subj + "\t" + mimeType);
Object o = m.getContent();
if (o instanceof String) {
System.out.println("**This is a String Message**");
System.out.println((String)o);
else if (o instanceof Multipart) {
System.out.print("**This is a Multipart Message. ");
Multipart mp = (Multipart)o;
int count3 = mp.getCount();
System.out.println("It has " + count3 +
" BodyParts in it**");
for (int j = 0; j < count3; j++) {
// Part are numbered starting at 0
BodyPart b = mp.getBodyPart(j);
String mimeType2 = b.getContentType();
System.out.println( "BodyPart " + (j + 1) +
" is of MimeType " + mimeType);
Object o2 = b.getContent();
if (o2 instanceof String) {
System.out.println("**This is a String BodyPart**");
System.out.println((String)o2);
else if (o2 instanceof Multipart) {
System.out.print(
"**This BodyPart is a nested Multipart. ");
Multipart mp2 = (Multipart)o2;
int count2 = mp2.getCount();
System.out.println("It has " + count2 +
"further BodyParts in it**");
else if (o2 instanceof InputStream) {
System.out.println(
"**This is an InputStream BodyPart**");
} //End of for
else if (o instanceof InputStream) {
System.out.println("**This is an InputStream message**");
InputStream is = (InputStream)o;
// Assumes character content (not binary images)
int c;
while ((c = is.read()) != -1) {
System.out.write(c);
// Uncomment to set "delete" flag on the message
//m.setFlag(Flags.Flag.DELETED,true);
} //End of for
// "true" actually deletes flagged messages from folder
fldr.close(true);
store.close();
catch (MessagingException mex) {
// Prints all nested (chained) exceptions as well
mex.printStackTrace();
catch (IOException ioex) {
ioex.printStackTrace();
Please tell me.
ThanksIs it possible that GMail only allows access to untagged emails via POP3? Or only to emails from the last x days?
POP3 is the older email retrieval protocol (IMAP4 is the more current one) and only has very limited support for folders (or anything but a single inbox, really). It's quite common that POP3 only allows access to a subset of all emails stored by a provider. -
I'm trying to make "Stop motion videos" in Final Cut EXPRESS by using 100's of still photos and setting them to music. They are coming out blurry if viewed larger than 4x6 in size.
I don't understand why this is happening.Quick follow up, since I was on my phone earlier and am back to a real keyboard.
To access Easy Setup, hit Control Q.
If you click on the blue discosure triangles, a dropdown menu with about a dozen different presets will be displayed. Select the one you want, (Here, I've selected 720P.)
Whatever you select for a preset will not be applied until you make a new sequence. (I don't like to have sequences with different properties in the same project so I prefer to make a new project if I change the Easy Setup.)
Because photo aspect ratios are different than video, I typically put a solid generator of some compatible color on the first track (v1) and put my photos on the track above (v2). Looks better, IMO, than black bars. There are other creative ways to display them. And of course, you could scale them up to fill the frame…but then you probably would have to re-position them.
Good luck.
Russ -
On iphone 4 how do i block text messages that are coming from an email account?
on iphone 4 how do i block text messages that are coming from an email account?
There is no way to block text messages. You may wish to report them to your carrier
Maybe you are looking for
-
Cannot login with AD credentials on iMac
Greetings: I have a brand new 27" Intel iMac that had been allowing AD logins just find until today. Now, no matter what I do, unbinding, rebooting, manually joining domain (dsconfigad), etc I cannot login using my AD credentials. This had been worki
-
Can I stop a Finder window from opening on a mounted volume?
I work in an elementary school. One of the startup items on our kindergarten computers is a shared network applications volume. I have set the Finder preferences to not show connected servers or the hard drive on the desktop. However, when the comput
-
Well i was just wondering.. since i do have a older version of the Macbook Pro.. and the fact that the power cord has been damaged
-
In the short cut bar below the address line in Firefox, all the items appear twice. The folders that are featured there (collections of shortcuts) are also double now, but one of them is empty and the other contains the normal shortcuts. It happened
-
I am getting a strange problem with the taskinstance deletion. When I am trying to delete the taskinstance by clicking the taskitem and hit delete it is giving me unknown <TASKITEMID>. When I listed all the taskinstances from the debug page and click