2lis_02_itm setup table successfull but rsa 3 no data

Hi @all,
we have an problem with one R3 source system. Following Issue. The system connection is okay we get data from some FI extractors.
But the 2lis_02_itm extractor sends no data to bw:
Following is done:
1. we have datas (ekko,ekpo)
2. 2lis_02_itm Structure is active
3. Processkeys are maintained
4. setup table are built sucessful and he collects data(setuolog)
But the extractor checker doesn't work he collects 0 data.
Does anybody know where lost the datas? Why we don't get any datas ? For other application componnent like FI we can extract data.
Help would be great.
thanks in advance!
Br
rene
Edited by: Renè Lechtenböhmer on Aug 20, 2008 11:52 AM

Hi,
Can you please check if the following settings mentioned in the best practice document have been maintained,
3. Configuration
1. Customizing for the Extractors
1. Order Update Parameters Setting
Procedure
This step has to be carried out in the R/3 System.
R/3 – Role Menu Order Update Parameters Setting
Transaction code OPL5
Carry out the following steps:
1. If the view is in Display mode, change it to change mode.
2. Select the lines in which there are transaction data you want to upload to BW.
3. Select the Details button.
4. Ensure that the four indicators (Update, Header, Item and Operation) are chosen.
5. Press F8 to choose the next entry.
6. Choose Save.
Here is the link for the best practice document.
http://www.google.com/url?sa=t&ct=res&cd=2&url=http%3A%2F%2Fhelp.sap.com%2Fbestpractices%2FBBLibrary%2Fdocumentation%2FB80_BB_ConfigGuide_EN_DE.doc&ei=ZmO6R5qKFaTsgQKBrtDoDQ&usg=AFQjCNGINah5eM2RYjnbp2d10VuwfsfyCQ&sig2=GyGDHsqg8FOL2BSdpWBsvA
From thread,
Re: No data in PP datasources
regards,
Raj

Similar Messages

  • Problem in filling up the setup tables for 2LIS_11_VAHDR (All SD Data sources)

    Hello All,
    I have been  trying to fillup the setup tables for SD datasources( Application-11 Ex:2LIS_11_VAHDR), but it was not allowing me to do that.
    Below are the steps i have followed,
    1.Deleted the setup tables using tcode-LBWG- Application-11
    2.Cleared the queues in RSA7 and found 0 queues for 2LIS_11_VAHDR D.S by triggereing the I.P till it get zeroes.
    3.Checked the data in RSA3-No data found.
    4.Filling the setup tables using OLI7BW t-code, got a popu(Data for 2LIS_11_VAHDR has to still transfered)
    Do i need clear all the queues for SD-Billings,Orders e.t.c  since i have 8 data sources to be cleared apart from 2LIS_11_VAHDR .
    Could you please suggest any other option to fillup the setup tables.
    Regards,
    Siva

    Did you run the infopackage twice pertaining to 2lis_11_vahdr.One for delta and another time for repeat delta.As delta queue will hold the records in repeat delta mode as well.
    Also in case of Direct Delta --Data is transferred to Base tables and delta queue (RSA7) at the same time.So extraction queue (LBWG )and update tables(SM13) does not come into the picture.
    Regards,
    AL

  • Fill  setup table with a large of data

    hi all:
    There is a large of data  that need ECC system  stop 3 days must  be filled in setup table ,what can I do it step by step?
    Thanks!
    Best regards!

    Hi Lian,
    You can divide the data into some segments for example say on calendr day or calendar month and the run the loads based on these selections. It will take less time as compared to run all the data at the same time.
    Cheers...
    Puneesh

  • Enhancing the standard  Data source without deleting setup tables

    Hi all,
    I am in the the Support Project. My requirement is I want to Enhance u201C2LIS_13_VDITMu201D LO- data source with two fields without disturbing the delta.
    Please suggest me how I have to do this.
    As Per my Knowledge ,
    1. we have to delete setup tables
    2. Enhance the data source & re populate the setup tables.
    3. Delete the data in the cube & add the two new fields in the cube & repopulate the cube with new Initial .
    4. after that delta will be enabled through job control.
    But this process is not suitable for our requirement because delta was enabled long back it is going very smooth till date, I donu2019t want to disturb that process.
    So please suggest me is there any other procedure to do this.
    Thanks,
    Kiran Manyam

    Hi,
    If historical data (loaded earlier in to BW) are not required for the two enhance field, then it is not required to deleted the setup table and reload them to BI.
    In this case simply you can follow the following procedure.
    1. Enhance the fields, and update the transfor structure(to unhide these fields). In BI update the required data target with respective IO. and in exit populate the enhance fields. No need to disturb the delta
    2. Replicated the DS in BI and do the mappings in tranformation.
    Here the existing delta is working, and you will be populating the two fields in the exit only.
    Thanks,
    Jugal.

  • Data not seen in RSA3 after setup table was filled

    HI
    We have an issue where we do not see data for Sales Orders and Deliveries in RSA3  (and hence is missing in BW).
    For sales orders we are missing 6 months' data and for Deliveries we are missing data from june to october 2007.
    We checked the sales order and delivery documents in R/3 and they exist for the above date ranges. We deleted and filled up the setup tables. But still don't see the data in RSA3.
    There were no extractor changes done.
    Any tips?
    Thanks
    Pooja

    Go to SE11 and search for setup and look for the specific data source and see the content, if the content is actually zero, then there is nothing in the setup table.
    thanks.
    Wond

  • Trying to fill Setup table but could'nt able to do?

    Hello all
    Iam trying in Sandbox,to fillup the setup tables for Sales Application "11",but its saying like "<b>No extraction structure active or no BW connected</b>",for this I deleted the setup tables from "LBWG"  and tried to delete the Init load from Infopackage,but no Init load is available there? and then Iam trying to fillup the setup table but the same error is repeating.
    How to fillup setup tables now?
    Many thanks

    Error message when filling the setup tables   Help 
        SAP Note Number      Note Language    DEEN    Display Versions    12  
    Print      SSCR      Download 
    Text  Header Data  Release  Correction Instructions  Support Packages  >>  
    Symptom
    When you call the transactions for filling the setup tables to initialize the logistics data for the Business Information Warehouse, the system terminates with error message M2630:"No extraction structure active", although the update is active for at least one extract structure.
    Additional key words
    LBWE OLI4BW OLI9BW OLI7BW
    Cause and prerequisites
    The problem may be caused by the fact that there is no BW system connected to the OLTP system.
    Solution
    Change the text in error message M2630 to:
    "No extract structure active or no BW system connected"
    Source code corrections

  • Order is locked by user while filling setup table

    Hi Experts,
    Yesterday while i am filling setup table for 2LIS_DM_VAITM (DBM Sales) data source it got cancelled.
    It showed that " Order xxxxxx is locked by user".
    Because we have DSO concept in our CUBE, we didn't lock users.
    But then the basis checked the users and removed from the system.
    But still after removing the users, when we do the setup filling it still gets cancelled showing the same error.
    Please help on this. Now i am stuck in filling setup section.
    Thanks,
    Thilini

    Hi,
    Thanks. I followed your instructions and removed * , last two check boxes and selected sales org.
    Now i am filling setup and its still running. I used a background job.
    In sm37 it shows as "active"
    But when I check in NPRT, It shows no logs were found.
    I want to know that, is everything fine?
    Setup table is filling right?
    expects a reply please...
    Thanks,
    Thilini

  • Setup table problem

    hello friends,
    i am trying to fill the setup tables for some sales document range , and when am running the statiscul update for this document . It is completing in 2 minutes , as there are no document ..but still it doesn#t show any records when i check the datasource in >RSA3 .
    I have checked the setup table also , but there is no entry .
    MC12VC0HDRSETUP                BW Reorganization Store for MC12VC0HDR 
    MC12VC0ITMSETUP                BW Reorganization Store for MC12VC0ITM 
    MC12VC0SCLSETUP                BW Reorganization Store for MC12VC0SCL 
    Any idea ?

    yes  temination date i have given as 31,12,9999
    and yes data is available for those documents .
    below is the job log -
    Job started
    Step 001 started (program RMCVNEUL,
    Start of delivery note processing
    Job finished
    Please help me .
    Regards

  • Trying to fill setup table for 2LIS_04_P_ARBPL

    Hi
    I am trying to delete and fill setup tables for 2LIS_04_P_ARBPL. I go to SBIW, delete setup tables for application component 04 and then go back to fill setup tables. But I get the message "DataSource 2LIS_04_P_ARBPL contains data still to be transferred".
    Am I missing a step?
    Thanks
    Pooja

    I went to transaction SBIW ->Settings for Application specific datasources ->Logistics->Initialization->Delete contents of setup tables-> Application 04
    Then under Initialization I went to Filling in the Setup table->Application specific setup of statistical table ->Production.
    I entered the date & time (and entered my own Run name. Should I say new run or rerun or give my own Run name?) and executed the transaction.
    Then I got the message - datasource still contains data to be transferred.
    Thanks!

  • Filling up of setup tables

    Hi All,
    We have our system landscape as Client 100, 110 and 120. I have made the changes in LO-Cockpit in 100 but I have my test data in 120. My BW is connected to 100 and 120 as well. So I have deleted the setup tables and filled them up(OLI7BW) in client 120. But when I ran RSA3 it is showing up as 0 records.
    Do I need to do some settings in 120 as I have activated and made the changes in 100. Do we need to transport the request from 100 to 120?
    I am filling up the setup tables using OLI7BW but how can I know if the setup tables are filled or not? Is there any way that I can check it?
    Thanks,
    RPK.

    Hi RPK,
    are you sure that your extract structure is activated in your client 120. The initialization program can't start when no extract structure is activated. But it starts, if only one is activated. Maybe the relevant extract structure isn't activated.
    You can't see exactly what's inside the setup tables. But you can check, whether there is any dataset inside the table. Type setup in Transaction SE16, press F4 and select the relevant table. Than you can take a look
    regards.
    Juergen

  • Do we need to fill setup table if we change extract structure of D/S

    Hello Experts,
    as we are in need of adding new filed to existing delta enable Datasources.
    Do we need to fill the setup table if we change the Extract structure of Data source which is already loading Delta data to bw system?
    case 1) we are planning to add new field directly in maintain structure in TCode LBWE.
    case 2) adding new field to Extract structure and writing relavent code in CMOD.
    Thanks in advance
    Regards
    Ravi

    Hello Ravi,
    If you are adding new field to a structure, even though you do not need historical data in the new fields it is a mandate that you have to replicate the datasource and then reinitialize the datasource, in both the cases you have mentioned. The reason for this is, the RSA7 contains your existing structure, as you are changing it, a new replica needs to be created in RSA7. You have to run a INIT without datatransfer, dont need to refill the setup tables for the INIT without data transfer.
    After you activate the new fields and poppulate it using CMOD. First transfer all the records in SMQ1 to RSA7, using a V3 update. Then run a delta in BW, by this way you will load all the existing records from source system to BW. Then replicate the datasource and create the required InfoObject and mapping in BW (Please note that without deleting data, you wont be able to change the DataTarget structure unless you are using remodelling in BI 7.0). Delete the datasource entry in RSA7. Runa INIT without datatransfer.
    Please let me know if you need any more information.
    Regards,
    Pankaj

  • Setup table - Archiving run option

    Hi all,
            I want to check my inventory data have archiving run while filling setup table. Also archiving run data in which table i can find. If required R3 data in archiving table, we no need to think about backup data in BW.
    thanks

    Hey Raj,
    Your question is not clear?
    If you are talking about archived data
    - Archived data will be not be present in the source tables, you need to perform special mechanism to retrieve the archived data.
    - if you want to extract the data using the data source to BW you will not be able to extract the archived data.
      For this you need to write a exit in CMOD for that particular data source to additionally extract archived data where for example BSID-XARCH =x or BSEG-XARCH=X etc.
    or
    one more way is to extract the archived data by creating a generic data source on top of the archived tables for only those records which are archived (XARCH = X).
    Just perform a full update as the archived documents does not have updated records. you can go for creation of generic data source it would be a better option to extract the archived data instead of disturbing the existing data flow.
    Regards
    KP
    Edited by: prashanthk on Nov 17, 2011 11:58 AM

  • Fill setup table

    can someone tell me how I can monitor the setup table fill for SD.  When I click it for orders it just pops up and says "staert of order processing" and then the screen locks up.  I have no indication of progress or when it finishes.  When I check the job monitor it seems nothing is running....
    i need to know how long users should remain locked out and when I can start the BW reinit full load...

    et up table definition
    Setup table is store the historical data, where as the delta records are updated in delta queue not to set up table.
    So once historical data is loaded you can delete the contents of the set up table.
    name is extract sturcture of your data source + setup
    also data is taken from setup table when an init / full/ full repair load is done.
    so in order to take ur records from the table delete the setup table(LBWG) and initialize it with ur records.
    You can find the contents SE16
    Filling set up tables
    transac LBWG
    + SBIW -> Logistics -> Managing Transfer Information Structures-> Setup of Statistical Data-> Application-Specific Setup of Statistical Data
    set up tables
    Set up tables
    Set up tables
    view of set up tables data in se11??????????
    Set Up tables..
    lo: delete set up tables: DOUBT
    Hope it helps
    regards
    bala

  • QM SetUp Tables Filling Steps

    Hi Gurus,
    I am trying to fill the setup tables for the QM Module (05).
    Even after waiting for a few hours its not filling any records to the Data Sources.
    Can you please let me know if i need to do anything else like any other settings before filling the             QM Set Up tables.
    When I checked the NPRT   T-Code ...  It shows that the finish date and time along with 0 Number of Documents .
    Can someone please let me know the exact steps for filling the QM set up tables .
    Regards
    Vikram....

    Hi Jorge,
    I have a live BW 3.5 system connected to this live R/3 system and now we are Re-Implementing the same into BI 7.0 System.
    The delta Loads are getting loaded everyday to the existing BW 3.5 System, so I cannot delet the initialization request and i dont see any reason for doing that to fill the setup tables.
    I have to do a Full load to the new BI 7.0 System till 2007 Fiscal year and are planning to load the current fiscal year data during cut over period.
    So,I need to fill the Setup tables to load the Historical Data till 2007 Fiscal Year. Can you please help me out with this issue....
    Regards
    Vikram...

  • Advantages of filling of setup table ?

    Hello ,
    Could you please let me know the advantages of filling setup table ?
    Regards

    Hi,
    Setup Tables are cluster tables. They are used to extract the data from R/3 Tables.(LO Extractors)
    Basically, for entire application like SD , Billing we have got it's own setup Tables...so while filling the set-up tables, we usually fill for the entire application.
    Ex: OLI7BW, is for filling setup Tables for SD application. and OLI9BW T-code is for Billing Application,
    When u fill the setup Tables, the data from different tables..VBAK, VBAP, VBRK, VBRP...etc will come through communication Structures and saved in SetupTables...
    The main advantage of having setup Tables (These are like Cluster Tables ), we can read the data in different levels..Header level as well as Item level.
    when we run init load or Full load in BW, the data will be read from Setup Tables for the first time( Entire data will be read).... and the delta records will be updated to Delta Queue once the v3 jb runs... and we can extract the delta records from Delta Queue.
    once we succefully run the init, we can delete setup Tables also... no probs...
    Filling up the set up tables depends on the datasource.
    there are different T-codes for the respective extract structures
    OLIIBW transaction PM data
    OLI1BW INVCO Stat. Setup: Material Movemts
    OLI2BW INVCO Stat. Setup: Stor. Loc. Stocks
    OLI3BW Reorg.PURCHIS BW Extract Structures
    OLI4BW Reorg. PPIS Extract Structures
    OLI7BW Reorg. of VIS Extr. Struct.: Order
    OLI8BW Reorg. VIS Extr. Str.: Delivery
    OLI9BW Reorg. VIS Extr. Str.: Invoices
    OLIABW Setup: BW agency business
    OLIFBW Reorg. Rep. Manuf. Extr. Structs
    OLIIBW Reorg. of PM Info System for BW
    OLIQBW QM Infosystem Reorganization for BW
    OLISBW Reorg. of CS Info System for BW
    OLIZBW INVCO Setup: Invoice Verification
    OLI7BW is the tcode for Sales Order.
    Have a look at these discussions:
    set up tables
    Set up tables
    Set up tables
    view of set up tables data in se11??????????
    Set Up tables..
    lo: delete set up tables: DOUBT
    Blogs of Roberto will be useful as well:
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    LOGISTIC COCKPIT DELTA MECHANISM - Episode two: V3 Update, when some problems can occur...
    LOGISTIC COCKPIT DELTA MECHANISM - Episode three: the new update methods
    LOGISTIC COCKPIT - WHEN YOU NEED MORE - First option: enhance it !
    LOGISTIC COCKPIT: a new deal overshadowed by the old-fashioned LIS ?
    Display Setup Table Data:-
    Goto SE11 or SE16 -> MC*SETUP -> F4 you will get all the setup tables choose and display the data
    To check completion of dta loading
    NPRT t-code... Where u can see the entry with ur user and the Run of ur setup..
    Regards
    Tg

Maybe you are looking for