2LIS_02_SCL not pulling all data in EKET
Hi Experts,
i know datasource 2LIS_02_SCL is pulling R3 table EKET records.
in wat situation some records is not being pulled to BW? i got records exist in EKET but cannot find it in BW.
Thanks for the advise...
if i remember well within the standard extractors it's hardcoded not to extract doc category K...
Similar Messages
-
Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?
If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability -
Report is not pulling the data from multiprovider in BI 7.0
Hi BW gurus,
We have upgraded our BW systems from 3.5 to BI 7.0.
According to our requirement we did some modifications(added some new cubes) to existing multiprovider. All the objects and assignments looks good in the multiprovider.
We are facing a problem while executing the reports, report is not pulling any data from the particular multiprovider but I can see the data from the multiprovider.
For any selection creteria we are getting the msg like "No applicable data found".
Created a sample query with only two chars and two KF's no conditions, no exceptions still the report is not populating any data for any selection creteria.
Appreaciate for your help in this regard.
-BKHi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR -
0fi_gl_4 init is not pulling any data
Hi All,
We have ofi_gl_4 installed and running fine with deltas. We thought of reinitializing the delta because of some business reasons. I deleted the delta initialization and started delta initialization with data transfer with Fiscal Year/Period selection. It is not pulling any records and it is saying there is no new delta since last extraction. I'm sure there is data as this extractor pulled the data so far for this period.
Then I thought of testing this using RSA3. Even RSA3 is not pulling any data. But there is data in BKPF/BSEG for this periods.
The extractor is putting the correct time stamps in BWOM2_TIMEST and all other entries in tables like TPS31, BWOM_SETTINGS are all okay.
Did any body faced this problem? Is there any change in the FI extractors recently?
Your help is greatly appreciated.
Thanks,
TrinadhaHello Trinadha,
You may want to have a look at OSS note 640633. Following is the text from note.
Hope it helps.
Regards,
Praveen
Symptom
Deleting the Init 0FI_GL_4 deletes all BWFI_AEDAT data
Other terms
0fi_gl_4, 0fi_ar_4, 0fi_ap_4, 0fi_tx_4, BWFI_AEDAT, BWFI
Reason and Prerequisites
The system was intentionally programmed like this.
Solution
The error is corrected in the standard system with PI 2004.1.
The reset logic is changed with this note so that during the reset, the DataSources 0FI_4 only delete their own entries in the initial selection table (ROOSPRMSF) and in the time stamp table (BWOM2TIMEST). The data of the table BWFI_AEDAT is, however, only deleted if no more 0FI__4 DataSources are active.
Proceed as follows for the advance correction:
1. Install the code in function module BWFIT_RESET_TIMESTAMPS or include LBWFITTOP.
2. Create an executable program ZFCORR_BW_02 with transaction /NSE38.
Program title: Change 0FI_*_4 DataSources.
Selection texts: Name Text
OBJVERS Version
OLTPSOUR DataSource
Implement the source code of program ZFCORR_BW_02.
Execute the program for the DataSources 0FI_AR_4, 0FI_AP_4 and 0FI_TX_4. The program uses the BWFIT_RESET_TIMESTAMPS function module as a reset module for these DataSources. -
Why the 2LIS_08TRTK extractor can not get all data
Hello, BW Gurus.
Why the 2LIS_08TRTK and 2LIS_08TRTLP extractors can not get all data. I had used the RSA3 and get 10 registers, when a check at the VTTK table I had 20 registers, I didnt use filters at RSA3, could you help to know what happen o correct it.Is it because
<i>
Shipment documents and their dependent objects (shipment stages as well as shipment items [deliveries in the shipment]) are only extracted into BW when the Shipment completion status has been set.
This is necessary because the numeric values that result from the delivery documents are only established at the time. If the data were already stored earlier in BW, the shipment data would not be updated if the delivery notes were changed in BW.
</i>
- from oss note 573470. -
CRYSTAL 8.5.. NOT PULLING ALL ITEMS INTO TOTAL
HELLO, WE ARE USING 8.5 AND NOW IT ISN'T PULLING ALL OF THE DATA NEEDED FOR A LINE TOTAL. WHILE TRYING TO FIGURE OUT WHAT HAPPENED, WE FOUND THE SPECIFIC ITEMS "SUPPRESED", AND CORRECTED THAT, HOWEVER ALL ITEMS ARE NOW LISTED AS THEY SHOULD BE, BUT NOT BEING INCLUDED IN THE TOTAL... ANY ASSISTANCE WOULD BE APPRECIATED IF YOU KNOW HOW TO CORRECT THIS,
Hi,
Are you using a running total to or are you summarzing the numbers? If you are using a running total, where on the report is the formula totalling, is it in the Detail section, Footer?
When you show the running total formula, can you actually see which records are not totalling?
It's always possible the formula is missing something. If you created a simple running total like:
WhilePrintingRecords;
NumberVar MyTotal;
MyTotal := MyTotal + {table.FIELD};
Do the same records total or are they also being skipped?
Are you initializing or reinitializing the running totals somewhere in the report? Possiblly in a Group or Page header?
Crystal 8.5 didn't have any problems that I could remember with running totals, I made literally hundreds of reports with running totals in that version so I'm more inclined to look at the formula and how the running total is setup.
Good luck,
Brian -
Po is not pulling the data.
Hi all,
I have created a purchase order. and i want to create a voucher using this purchase order.
So i went to AP->vouchers->add/update->regular entry. then click add.
i have given the PO unit. and when i click the magnifying glass beside the purchase order and search for the PO, it is not pulling my purchase order i just created.
Do we have to do any setting after the purchase order is created and before we create the voucher.
Please help me.
Thank you,
Bye.Hey JayaPrakash,
I did not know that i have to dispatch the PO. Now i dispatched it. and it's pulling this data in voucher regular entry.
Thank you very much.
Bye. -
2lis_11_VAITM not inserting all data in ODS
Hello Gurus.
I'm using extractor 2lis_11_VAITM, when I test the extractor in RSA3, it is bringing me all registers of table VBAP, but when I load this extractor into an ODS in BW, It is not inserting all registers into the cube, some "return orders" are missing, how can i solved this problem ???? I'm using in ODS key Doc number and position.
THANKS IN ADVANCED.Hi Sudheer, ther is no selections during data load, and also ther isn't any routine(either in transfer or update rules). It's supposed that all registers have to be loaded to the ODS no ?? because i'm using key Doc number and positions, so I want all documents with all positions to be loaded, but this is not happening, there are missing the "'return orders'".
Any other idea of why this is happening ?? -
FDM export to HFM - 2nd export did not clear all data from 1st export?
Has anyone experienced exporting a replacement FDM file to HFM where the 2nd file did not contain an account that was present in the original file and that account/value in the 1st file then remained in the HFM trial balance and caused it to be out of balance? Does the replace export option not clear all the prior file data? The only unusual part of it might be that the problem account was derived using logic group script? Thanks.
Thanks Hensen - Sure, it was easy enough to fix once I deduced what the problem was - although my solution was just to use the data clear function and reload. The real question is how to prevent it from happening again and it sounds like I can't do much about it - other than trying to train the users to watch out for do-over files that have fewer accounts than the original load?? Am I wrong to think that HFM should try to fully clear all previous data from a load file if there is a replacement or at least try to validate whether or not all prior accounts have been repopulated?? There's plenty of good validation in the validation step of FDM. Why not during the export step? If this makes sense, I'll put in another "enhancement request" to support.
-
Help: Not getting all data from text data type
Hi there
I have a stored procedure that returns a couple of fields and one of the fields is of datatype TEXT. In my ResultSet, I do not get all the data back that is stored in the TEXT datatype. I have say about 600 charactors in this field, but only 30 charactors are returned. Is there a reason why this is happening and how can I fix it?
Please help?
ThanksI set that field to have a normal string of about 50 charactors. Namely: "this is a note that is about 49 charactosrs long." (exclude the quotes). And I still got 30 charactors back only.
I set a shorter text value of 21 charactors and that returned all 21 charactors.
The text that is usually in this field is:
"URL=SubsidiaryNarrative.html�BABY_CARE_PRODUCTS=false�AIDS_FOR_PHYSICALLY_DISABLED=false�SPORT_SUPPLEMENTS=true�NATURAL_REMEDIES=false�COSMETICS_FRAGRANCE=false�WOMANS_HEALTH=false�ADDITIONAL_CARDS=No�EXERCISE_ROUTINE=Yes�NUMBER_OF_CHILDREN=0"
And I got out "URL=SubsidiaryNarrative.html�B" -
Ical not storing all data & cant initialize lists
okay so im trying to store all ical data in seperate lists for hours months years and the actual event ect....it worked fine for a while but now its not storing all the events....and then when it did it would carry over from one run to another. I figured out that was probably because they were properties but when i make the lists global i get a "this variable is not initialized" problem. and even if i somehow managed to fix that its still not reading in all the data. ive been at this for 2 hours and cant see the problem. please help:
variable defs:
(*System Variables*)
global running_processes
global _weekday
global _date
global _month
global _year
global _hours
global _minutes
global _seconds
global time_ofday
(*iCal Variables*)
global iCal_Open
global iCal_Run
global iCal_Calendars
global iCal_Events
global icaleventsstore
global icaleventslast
global iCalEvents_StartMonth
global iCalEvents_StartDate
global iCalEvents_Startyear
global iCalEvents_Starthours
global iCalEvents_StartMinutes
global iCalEvents_EndMonth
global iCalEvents_EndDate
global iCalEvents_Endyear
global iCalEvents_Endhours
global iCalEvents_EndMinutes
global iCalEventsStart
global iCalEventsEnd
code to split up dates and date:
on Ref_Events()
proc()
if running_processes contains "iCal" then
(*if iCal is open do the code as normal*)
set iCal_Run to 1
set iCal_Open to 1
tell application "iCal"
set iCalEventsStart to the start date of every event in every calendar
set iCalEventsEnd to the end date of every event in every calendar
set iCal_Events to the summary of every event in every calendar
set x to 1 --holds calendar to be used
set y to 1 --holds event to be used
repeat while x is less than or equal to the number of items in iCal_Events
repeat while y is less than or equal to the number of items in item x of iCal_Events
get item y in item x in iCalEventsStart as string
set temp_date to the result
--start dates
set iCalEvents_StartMonth to iCalEvents_StartMonth & the second word of temp_date
set iCalEvents_StartDate to iCalEvents_StartDate & the third word of temp_date
set iCalEvents_Startyear to iCalEvents_Startyear & the fourth word of temp_date
set iCalEvents_Starthours to iCalEvents_Starthours & the fifth word of temp_date
set iCalEvents_StartMinutes to iCalEvents_StartMinutes & the sixth word of temp_date
--end dates
get item y in item x in iCalEventsEnd as string
set temp_date to the result
set iCalEvents_EndMonth to iCalEvents_EndMonth & the second word of temp_date
set iCalEvents_EndDate to iCalEvents_EndDate & the third word of temp_date
set iCalEvents_Endyear to iCalEvents_Endyear & the fourth word of temp_date
set iCalEvents_Endhours to iCalEvents_Endhours & the fifth word of temp_date
set iCalEvents_EndMinutes to iCalEvents_EndMinutes & the sixth word of temp_date
--event description
get item y in item x in iCal_Events as string
set temp_event to the result as string
set icaleventsstore to icaleventsstore & temp_event
set y to y + 1
end repeat
set x to x + 1
end repeat
end tell
else
(*if iCal is not open do the code then close it*)
if iCal_Run is 0 then
set iCal_Run to 1
tell application "iCal"
set iCalEventsStart to the start date of every event in every calendar
set iCalEventsEnd to the end date of every event in every calendar
set x to 1 --holds calendar to be used
set y to 1 --holds event to be used
repeat while x is less than or equal to the number of items in iCalEventsStart
repeat while y is less than or equal to the number of items in item x of iCalEventsStart
get item y in item x in iCalEventsStart as string
set temp_date to the result
--start dates
set iCalEvents_StartMonth to iCalEvents_StartMonth & the second word of temp_date
set iCalEvents_StartDate to iCalEvents_StartDate & the third word of temp_date
set iCalEvents_Startyear to iCalEvents_Startyear & the fourth word of temp_date
set iCalEvents_Starthours to iCalEvents_Starthours & the fifth word of temp_date
set iCalEvents_StartMinutes to iCalEvents_StartMinutes & the sixth word of temp_date
--end dates
get item y in item x in iCalEventsEnd as string
set temp_date to the result
set iCalEvents_EndMonth to iCalEvents_EndMonth & the second word of temp_date
set iCalEvents_EndDate to iCalEvents_EndDate & the third word of temp_date
set iCalEvents_Endyear to iCalEvents_Endyear & the fourth word of temp_date
set iCalEvents_Endhours to iCalEvents_Endhours & the fifth word of temp_date
set iCalEvents_EndMinutes to iCalEvents_EndMinutes & the sixth word of temp_date
--event description
get item y in item x in iCal_Events as string
set temp_event to the result as string
set icaleventsstore to icaleventsstore & temp_event
set y to y + 1
end repeat
set x to x + 1
end repeat
end tell
quit application "iCal"
end if
end if
if icaleventsstore is not icaleventslast then
say "new events stored in I Cal. Would you Like to View a List of all events?"
display dialog "View List of Events?" buttons {"Yes", "No"} default button 2
if the button returned of the result is "Yes" then
choose from list icaleventsstore with prompt "All the Current Events"
else
-- action for 2nd button goes here
end if
set icaleventslast to icaleventsstore
end if
end Ref_EventsYou need to be careful when using conditional statements to set global variables (the global declaration does not set any values). I can't tell from the just the one handler you posted, but an example would be the iCal_Run variable - unless it is declared somewhere else, it won't have a value if there isn't an iCal process.
-
HI
does anyone know why would st03n not collect all proper data, we found out recently that a user had scheduled a program as a background job to run and it ran successfully but when we look on that date we don't see that it had run and even that user doesn't come out in the history
any ideas why?
regardsSorry Sujit that I wasn't clear
the job i was referring to was a z program that was run be a user in the background.
that is how we started knowing that there were missing data in st03n
we were trying to see how many time that program ran and who ran it
so we went to see in st03n but we found out that there was no history for that program in there or any history for the user who ran the z program in the background.
there is no connection to SAP_COLLECTOR_FOR_PERFMONITOR background job. this job is running successful in our system and all other data is being collected
so the data that was missing was on the 14th of march and then we found out that there is no entry of any sort in st03n for 15th of march, but we have data for 16th of march.
so now we want to know what happened
i hope this is clear now
regards -
Dear Experts,
Today again I need your help gurus.
The Delta load is running everyday but its not getting any data to BW form CRM. But when the User raises an issue regarding the data , I pull the data by Repair Full load by some Selection ( Same selection of Delta + Transaction No ).
The selection(For Full Repair Load ) is only the Transaction No and the Sales Organization.
The selection for the normal Delta is Sales Organization ( 0CRM_SALORG ) 50000609.
But I am confused about the issue.
Kindly put some light on this issueu2026
Thanks,
SanjanaHi Sanjana:
Have you applied any SAP Note to fix this problem? Please check if the SAP Note below helps you in solving this issue.
Note 788172 - "CRM BW adapter: No data in delta with parallel processing"
Regards,
Francisco Milán. -
Unwrap not unwraping all data sent from server
java client server NIO ssl
At server end send about 50 packets are written using this method:
sendPacket(String packet)
writeBuffer = charSet.encode(packet);
c.ssl.outNetBB.clear();
c.ssl.engine.wrap(writeBuffer, c.ssl.outNetBB);
c.ssl.outNetBB.flip();
//write message to socket channel
while (c.ssl.outNetBB.hasRemaining())
socketChannel.write(c.ssl.outNetBB);
At the client end I read all these packets:
inNetBB.clear();
int bytesread = socketChannel.read(inNetBB);
inNetBB.flip();
requestBB.clear();
res = engine.unwrap(inNetBB, requestBB);
It seems like all the 50 packets are read into inNetBB 6000 bytes
But the unwrap only consumes 70 bytes and produces 100
This first 100 bytes is unencrypted correctly and corresponds exactly to one write of the 50 from the server. I dont know why.
Why am I getting only the first packet of the 50 sent??
[ Ive tried : while inNtBB.hasRemaining for repeated unwraps
but only the first packet is output still ]
TIA
pbutlerIf I'm reading this right, you're writing (wrapping) about 50 separate SSL packets, and then unwrapping just one.
Recall:
The SSLEngine produces/consumes complete SSL/TLS packets only, and
does not store application data internally between calls to wrap()/unwrap().So it looks to me like you need to keep unwrapping the rest of your 5930 bytes to get the remainder of the application data.
[ Ive tried : while inNtBB.hasRemaining for repeated unwraps
but only the first packet is output still ]Are you inadvertantly clearing the inNtBB before you call your additional unwraps?
If you have lots of small packets, you might want to consider buffering them up and wrapping them to the SSLEngine/SocketChannel all at once. You'll pay less in overhead. -
Emails do not download all data
Emails do not download all data
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Maybe you are looking for
-
Dynamic Columns Generation in Bex
Hi Gurus, I have a requirement to create a BEX report where user will enter a starting month/fiscal period and number of months/periods on a variable screen and the Bex will generate columns dynamically. If the user does not enter anything on the var
-
What is the shortcut to activate the tab list drop-down?
I seem to remember I used to use a keyboard shortcut to activate the tab list drop-down, instead of clicking on the downward arrow. Can someone tell me if it still exists and what it is?
-
Timestem and jdbc Query Timeout
hi all, i have install timesten on one computer and configure there Query Timeout like This: SQLQueryTimeout = 80 and i have JBoss Application Server on another computer and timesten client. i've timesten-xa-ds.xml configuration file configured like
-
SQLException: Message file missing
I am using oracle thin driver (oracle 816 drivers) to connect my serlvet to the database. The current environment I am using is JDK/JRE 1.1.7B and the database is Oracle 7.3. (according to the FAQ section, this is allowed. 816 drivers are compatible)
-
The Java Runtime Environment cannot be loaded from \bin\server\jvm.dll
I have been trying to use the java plug-in on the new JDK 1.5 in conjunction with older installations (1.4.2 and so on). The very first time that I installed JDK 1.5 the plug-in worked fine and there were no problems. If I tried to go into control pa