2LIS_02_SCL Transfer Rules are missing
Good Morning everyone, I recently activated BI Content (7.05 SP4) in BW (7.02 SP8) for infocube 0PUR_C01, and I can not see the transfer rules for 2LIS_02_SCL, what can I do?
Juan Orozco wrote:
I did install BC for 2LIS_02_SCL Transfer Rule (ISMP) again with options "In data flow before and afterwards", I got the right flow of objects from 2LIS_02_SCL ECC datasource to 0PUR_C01 Infocube in BW installed, but the Transfer Rule 2LIS_02_SCL status is Modified(Saved), when I try to activate this Transfer Rule, the system send the message "There is no PSA for InfoSource 2LIS_02_SCL_DA and source system LOGSYS120", what can I do?
Case A. RS_TRANSTRU_ACTIVATE_ALL
Case B. Give the tech name of the CLNT120 & generate it. RSDS_DATASOURCE_ACTIVATE_ALL
Case C. Replicate the datasource after adding/deleting fields in R/3. Right-click on this datasource and select 'replicate metadata' again. Activate using FM in Case A.
Edited by: Arun Bala G on Feb 16, 2012 9:29 PM
Similar Messages
-
Transfer rules are missing for selected source system in BI content
Hi All!
The problem is: in BI content (Release 704, level 0003, SP SAPK-70403INBICONT) when I select needed source system (for example, A) only I can not find any transfer rules (0RPM area, 3.X transfer rules). When I select more than 1 source system (B, C..), I can see lot of different transfer rules for 0RPM area, but with assignment to another systems (B, C..). How can I get in Business Content transfer rules for data sources from needed source system (A)? Any help appreciated!
Regards, Iryna.Hi Rathy!
Thank you very much for your quick help! Usually I do the same. Now I faced with BI system, where data source were already activated in system A and replicated. I can see all needed active sata source un BI already. But I can not see transfer rules in content!
What you can advise?
Reagrds, Iryna. -
Transfer rules are not exist for ECC Quality source system in BI Dev
Hi,
I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
Regards,
chandraHi Fayzrakhmanov
Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
Help on this would be appreciated.
Thanks -
IDOC in 51 status.Essential transfer parameters are missing in record
Hi All,
Essential transfer parameters are missing in record: 8701 000001
Message no. VL561
I am not understanding what is missing in the IDOC.
Please help me in resolving the issue.
Thanks,
Forumhi,
Do check whether the below points are mentioned or not...
Outbound delivery
Shipping point
Sales organization
Distribution channel
Division
Material number
Delivery quantity
Ship-to party
Base unit of measure
Inbound Delivery
Base Unit of Measure
Conversion factors for converting base and sales units
Goods Receiving Point
If it is given here in the doc, then check whether these are getting saved into the table or not..
Tables are :
LIKP, LIPS, VTTP...
Hope it helps..
Regards
Priyanka.P -
Error in Delivery using ME2O : "essential transfer parameters are missing"
Hi All
We have a subcontracting PO for which when trying to create Delivery using ME2O we are getiing error "essential transfer parameters are missing in record 000001". I understand that this error is coming because shpping point is not ap[earing when click on create delivery tab.
Any pointer in this regrd.
Would like to inform that we have already connected the Vendor and Customer in respective master. Apart from that
we have checked that shipping condition, loading group and plant is also set which determines the shipping point.
Would appreciate usefule pointer as this is very urgent.
Rgrds
YogeshHi,
Check following;
OVX6 - Assign sales organization - distribution channel - plant
SPRO > MM > Purchasing > Purchase Order > Set Up Subcontract Order > Here assign Delivery Type "LB" to Plant
SPRO > MM > Purchasing > Purchase Order > Set Up Stock Transport Order > Define Shipping Data for Plants > Here assign the Customer Code of Plant and Sales Area to the Plant
Note: - Customer Code of Plant is to be created in XD01.
Check whether Material Master is extended to the Sales Area.
OVL2 - Cross-check Shipping Point Determination -
Essential transfer parameters are missing in record: 000001
I have been trying to create a delivery ( Type LB) trough ME2O and get
this error .
Essential transfer parameters are missing in record: 000001
Message no. VL 561
Diagnosis
Information necessary for this delivery is missing.
System Response
Depending on the category of the delivery being created, the system
needs the following transfer data:
Outbound delivery::::::::
Shipping point
Sales organization
Distribution channel
Division
Material number
Delivery quantity
Ship-to party
Base unit of measure
Inbound Delivery::::::::::::::::::
Base Unit of Measure
Conversion factors for converting base and sales units
Goods Receiving Point
Outbound and inbound deliveries from goods movements::::::
Plant and sales unit transfer data is always mandatory..
Please help me how to fix this issue.
Thanks in advancehi,
Do check whether the below points are mentioned or not...
Outbound delivery
Shipping point
Sales organization
Distribution channel
Division
Material number
Delivery quantity
Ship-to party
Base unit of measure
Inbound Delivery
Base Unit of Measure
Conversion factors for converting base and sales units
Goods Receiving Point
If it is given here in the doc, then check whether these are getting saved into the table or not..
Tables are :
LIKP, LIPS, VTTP...
Hope it helps..
Regards
Priyanka.P -
BI content -- Transfer rules are not mapping automatically
Have any one come across with this issue.
We have connected R/3 system to multiple BI systems.
Eg: we have 1 ECC6 & 2 BI systems.
Business Scenario is .
I have two different Companyu2019s A & B in two different Network Domains ( Domain 1 & Domain2 ).
u201C A u201C Have Ecc6 & BI in the Network Domain1
u201C B u201C Have ECC6 & BI in the Network Domain2.
With in the Individual Domain ECC6 & BI is working Fine.
Issue : -
When I connected Company u201C A u201C Ecc6 ( Domain1 ) to Company u201C B u201C BI system ( Domain2 ).
The connection is showing OK.
Replication is also OK,
But BI content installation have issue, Transfer rules are not mapping automatically with Standard Data sources ( Eg: 0HR_PA_0 ).
Thanks in Advanceu2026
@Shaik...
Pls this is critical issue ... Basis people is saying this is not the issue of Basis..Connection is OK ...SO . it is the issue of BI only.
any one Advice me ....
Edited by: shaik on Aug 24, 2008 5:39 PMHi Raghavendra,
Thanks for Replay,
Can you explain me how to check the data mart Connection ?
what i am doing is ....
step 1: Connection is OK.
step 2 : Replication is OK.
step 3 : I am going to Install BC Infosource ( Eg: 0HR_PA_1 )
Grouping -
In data flow before.
source system -
i check the Ecc6 system which is in different domain.
then i drag the infosource ..... the transfer rules are not mapping ( Not coming )
pls Advice....
@ SHAIK...
Edited by: shaik on Aug 27, 2008 12:41 PM -
Transfer Rules are Inactive in BI 7.0
Hi,
I installed info bjects from Business Content, after installing transfer rules are inactive for project claims(0PS_CLM_CST). I am getting this type errors, object 0PS_CLM_CST Object version not found in table.
and also i am running the program in se38 (RS_TRANSTRU_ACTIVATE_ALL) It is showing errors.
Object 0PS_CLM_CST object version not found in table
Object 0PS_CLM_CST object version not found in table
Transfer structure 0PS_CLM_CST_BB NOT activated successfully Activate manually.
Please provide me solution.>
subba reddy wrote:
> Hi,
>
>
> I installed info bjects from Business Content, after installing transfer rules are inactive for project claims(0PS_CLM_CST). I am getting this type errors, object 0PS_CLM_CST Object version not found in table.
> and also i am running the program in se38 (RS_TRANSTRU_ACTIVATE_ALL) It is showing errors.
> Object 0PS_CLM_CST object version not found in table
> Object 0PS_CLM_CST object version not found in table
> Transfer structure 0PS_CLM_CST_BB NOT activated successfully Activate manually.
> Please provide me solution.
Hi,
After running the above program,catchup your infosurce and do manually activation of your transfer rules and updates as well,if present.
check whether all the InfoObjects are mapped correctly and the status is active or not.
Hope it helps... -
Transfer rules are mandatry While creating Info source
Hello BI Guru's
Is transfer rules are mandatry while creating Info Source in BI.
Please currect me if i am wrong.
I have created one genric extracter and want to create info source for that in BI and planning to create Transfermation btween Datasources and infosource and from info source loading data target through transfermation.
Please advise me which way is best way to follow the desing?hi,
in BI 7.0 transfer rules and update rules are not mandantory,
DataSource -> Transformation -> (DTP)-->Data Target
instead of TR/UR-- transformation is there
if helpful asign points
regards
harikrishna.N -
Transfer rules are inactive in BW Production system
The transfer rules are inactive in BW(Production) for the datasource 0FI_GL_4. I tried to activate by executing a program "RS_TRASNSTRU_ACTIVATE_ALL" and another option by moving transport request from Quality to production( I have done the replicate datasource as well). In the quality system the data flow is ok to ODS(0FIGL_O02). but in Production not able to activate the transfer rules. please suggest me the best practice.
Regards,
Leo.Hi,
Whenever we get such an error, we first need to check the Transfer Rules (TR) in the Administrator Workbench.
Check each rule if they are inactive. If so then Activate the same.
You need to first replicate the relevant data source, by right click on the source system of D/s ->Replicate Datasources.
Now execute the following ABAP Report Program u201CRS_TRANSTRU_ACTIVATE_ALLu201D.
It asks for Source System Name, InfoSource Name, and 2check boxes. For activating only those TR/TS which are set by some lock, we can check the option for u201CLOCKu201D. For activating only those TR/TS which are Inactive, we check for the option for u201COnly
Inactiveu201D.
Once executed it will activate the TR/TS again within that particular InfoSource even though they are already active.
Regards,
Suman -
0CA_TS_IS_2 Transfer rules is missing
Hello All,
I tried to install transfer rules for 0CA_TS_IS_2, But couldn't able to get I can install update rules and InfoCube 0CATS_C02,
I also tried to install transformation but not able to find, Do i need to create Tansformation or Transfer rules Manually, If yes.. Then is there and routine or master data read in between, Pl. help me to complete this flow.
Thanks.
shalini SinghIn that transformation (Datasource --> InfoSource) all fields have 1 to 1 mapping.
In transformation btn InfoSource --> infoCube
0CALDAY (from infosource) is mapped to all time characteristics (calday, month, month2, quart1, quarter, year, week) in infocube.
Some fields (Emplgrp, emplsgrp, pern area, pern subarea, 0CO_MST_AR, 0MAST_CCTR, person, orgunit) are master data read from 0EMPLOYEE.
And remaining fields have 1 to 1 mapping. -
Hierarchy Transfer Strucutre & Transfer Rules are not transported to QA sys
hai
I have one master data infobject. And i loaded the text , attribute, hierarchy data from Flat file.
I need to transport it QA system . I did it.
But when i checked in QA system. It says that "HIERARCHY TRANSFER STRUCUTRE" is not avaialbel in Qa system .
So how can i transport the "Hierarchy Transfer Strucutre & Transfer Rules" to QA ssytem .
Please tell me
rizwantransaction SM59 / R/3 connections; you should see your system there.
double click and Test connection.
then menu/test/authorization.
if you have transported stuff already then it is most likely because of your flat file source system.... Ensure that they're defined exactly the same way in your DEV and PROD! Right click this source system and perform a CHECK and/or RESTORE and/or ACTIVATE.
Partner profiles should also be similar. Transaction WE20 / Partner type LS / your flat file sys.
Finally ensure that your prod sys can access your flat file the same than your DEV!
did you already import TRules from with flat file?
hope that helps
Olivier. -
Missing Transfer Rules in Selection Window for Transport
Hello,
Can somebody tell me why certain transfer rules are missing in the object selection list of the transport connection window? I am using BW 3.5.
Problem details:
I want to transport a transfer rule from a DEV box to a QA box. In the transport connection window, I clicked on "select objects" from under transfer rules in the middle panel. The object listing that followed showed only objects that start with numbers; no object we defined locally that starts with Z was included.
I also noticed that this appears to be a "funny" problem. One other computer connected to BW shows the correct listing while still another shows a different listing. Has this got to do with any setting?
Please help.
WernelHi Wernel,
Its better to activate ur transfer rules once again. Also this Z* TRs would be displayed in last row of the Pop up window in the select Objects list.
or select them by grouping as before dataflow by selecting InfoSoruce.
Assign points if it helps...
Regards,
ARK -
Transfer Rules missing in Business Content (704 lvl 1) for CMS
Hi SDN,
We are currently on BI 7.0, and using Business Content 704 level 1. When collecting BIC InfoSources for Collateral Management Systems (CMS), we notice that the transfer rules are missing in business content.
Has anyone encountered this issue? I have been referencing notes 1171293, and 1179880
Thanks,
Brendonhi,
If there is missing in Business its problem with the business content patch levels.Check out with your basis team.
Regards,
Shiva. -
Technical Content BI Stat`s missing Transfer Rules for 0TCT_CA1
Hi,
I installed the new 7.0 technical content and had several glitches. Some are fixed with the new SP16, that we installed.
We are at BI Cont 7.03, patch 8.
There is no business content for the Frontend & OLAP Statistics (highly aggregated) 0TCT_CA1 transfer rules - although the cube and communication structure are there - as well as the virtual and multi cube with a lot of queries etc.
Does anyone have a solution for this?
Thanks!
KathleenHi Kathleen Cooke ,
I am having similar issue now, can you please let me know if you know the solution for the below problem..
I am trying to activate the Business Content for BW Statistics, but the datasource and the Transfer Rules are missing for the 0TCTPRCSVAR_TEXT and also a couple of BW Statistics objects...
I am on
BI_CONT 703, level 0005, Support Package SAPKIBIIP5
SAP_BW 700, level 0012, Support Package SAPKW70012
Thank You,
Varun.
Maybe you are looking for
-
Help! On the new iOS 7 I can't find spotlight search!
Help! On the new iOS 7 I can't find spotlight search!
-
I am trying to figure out the proper configuration for DNS that will support multiple domains. I have DSN working now for just one domain. My XServe has a static IP connected directly to cable modem and is the master nameserver. I also have an Ubuntu
-
3-Com NIC Card Networking Problems on Solaris 10 (x86)
Hi, I have Solaris 10 OS installed on a PC. I am having trouble getting my machine to ping other machines on the same network. I have executed the following commands: #ifconfig elxl0 plumb #ifconfig elxl0 192.168.100.181 netmask 255.255.255.0 up When
-
Single pulse width measurement
Hello, I am trying to measure the time of a single pulse using ctr0 on a PXIe-6361. The input signal seen in attachment Capture7.jpg, is going to PFI 9, the gate of ctr0. The problem is that the counter see' s the rising edge and stops. The pulse wid
-
Adobe reader multi language installer..
Is there any adobe reader installer that supports all language?