2lis_03_bf data is not showing data in RSA3

Hi,
I have loaded 2lis_03_bx first for a plant using MCNB transaction,its showing data in RSA3 then I have loaded 2lis_03_bf datasource for the same plant using transaction 0LI2BW. but it is not showing data in  RSA3.
I have done the above process in background.
In SM37 it is showing the following message for the 2lis_03_bf datasource
<b>Job started
Step 001 started (program RMCBNEUB, variant &0000000000003, user ID TCS_SRM)
Date fields for info structure S032 are not generated
Job finished</b>
steps:
1.Before loading the data I have deleted data using LBWG
2.In LBWE, 2lis_03_bf is already activated.
Please help me out on resolving the above issue
Thanks in Advance

ODS Settings
BEx reporting option --> If this indicator is not set, no SID's are generated for the new characteristics when the data in the ODS object is activated.This optimizes the performance of the activation process, but the ODS object is not available as an InfoProvider for queries. 
Refer this link for more information...
http://help.sap.com/saphelp_nw04/helpdata/en/a6/1205406640c442e10000000a1550b0/frameset.htm

Similar Messages

  • PLD Report does not show data from Query

    Hello,
    SAP b1 9.0 PL08 on MSSQL 2008 and I get data on the query, but when the PLD prints, it shows nothing. Is there a way to filter the data that the PLD shows? Does PLD have its own SQL script it uses b/c its not showing data from the query.
    Thanks,
    Nick

    Hi Nicholas,
    Please check below links.
    query based print layout design
    Print Layout Designer \Custom Reports
    How to Make a Print Layout (PLD) Report from a SBO Query | SBOnotes.com
    http://www.tegrous.com/wp-content/uploads/2011/07/HowTo_QPrintLs_88.pdf
    Hope this help
    Regards::::
    Atul Chakraborty

  • Report does not show data , but data exists in the cube.

    Hi All,
    I have a situation where I could not show the data in the report. When I load data from an extractor 0CO_OM_WBS_1 into a Cube directly I am able to show the data in my report. When I load the same extractor to a DSO and from the DSO when I load it into the Cube, the data does not show up in the query. To check the data I use the same restriction and could see the data reside in the cube (LISTCUBE). I compressed the requests, still it is not showing up in the query. No aggregates create on the cube.
    It shows the data if I load directly from the extractor, but not when I load data thru DSO.
    Any ideas.
    Alex(Arthur Samson)

    Hi Alex,
    I am facing same problem, i have data in cube but in report i cant see....
    i have created a generic DS, i loaded the data to DSO  then CUBE.
    data is loaded succesfully and i can see data in CUBE ( Manage ), when i am running the repory i am not getting data.
    i think you solve this issue... plz help me to resolve this issue.
    Regards,
    SHAIK.

  • Discoverer Plus 10gR2 not show data when the script of view have package

    Hi my friends.
    I have a problem with discoverer plus, I don't know is a problem or I'm doing something wrong.
    I have a four views, the views containg in the SELECT stament and WHERE clause packages, example:
    SELECT d.price,
    d.total,
    d.min,
    d.mx,
    TO_CHAR (SYSDATE, 'q') quarter,
    d.fid,
    k_xdcd_qry.f_xdc_obt_price (d.prod, d.id) --> package
    k_xpxpd_qry.f_xpeds_salary_ca_u (
    d.prod,
    d.id) xp --> package
    FROM px_prices_proc c,
    xp_sla_max d,
    xmp_sla_puc b
    WHERE a.prod = b.prod
    AND a.id = b.id
    AND a.prod = k_xps_tools.f_obt_prod --> package
    When I used the views on discoverer plus for construct the report, when execute the query not show data.
    Appreciate it if you could help or tell me I'm doing wrong or does not support Discoverer Plus package execution.

    Hi Tux,
    This appears to be a grant issue. Apparently, you have granted execute with respect to this package to the EUL owner or the view would not have compiled. If you have not given EUL owner the grant option, I would recommend doing this as well.
    This appears to be an Oracle APPS EUL (tell me if I am wrong). If this is the case, it goes without saying that APPS will need to be granted the execute privilege.
    Also, by default, a stored package executes with the privileges of its owner. If your custom package was designed this way, are the objects which it references received the appropriate grant? I assume you tested this, but I am concerned that the line, a.prod = k_xps_tools.f_obt_prod, in the where clause could be resulting in the Null set being returned.
    Patrick

  • EXCEL  out put is not showing data

    Hi All,
    My report is working fine  it is showing data in XML but it is not showing data in Excel output.   Excel output is empty.
    i have attached  excel and xml files.  please help me.
    FYI: these are migrated reports from 10g to 11g.
    Thanks in advance for your time

    Using ua.bat  we upgraded 10g to 11g., we got sucessfully message.
    after upgrade if i try to open excel it is not showing opening and showing action instead of excel name . I though  excel out put has corrupted. i downloaded excel layout from 10g and  uploaded in 11g report using upload layout.
    we did not make any changes in database.
    below one is not related to this one  but  .. after upgraded reports  multi parametrs  did not work if i select more than one column ( i opened as different topic) then i have removed
    ( (coalesce(null, :P_PPD_REGION) is null)  and kept(region.X_REGION in (:P_PPD_REGION) from following statement then i did report is working with multi  parameters.
    my doubt is is it correct thing i did ?  if not how can   my multi parameter will work .  we are using oracle as database.
    AND ( (coalesce(null, :P_PPD_REGION) is null) or (region.X_REGION in (:P_PPD_REGION)) )
    AND ( (coalesce(null, :P_COUNTRY) is null) or (region.REGION_CD in (:P_COUNTRY)) )
    AND ( (coalesce(null, :P_SITE_NUM) is null) or (ptcl_site.site_num in (:P_SITE_NUM)) )
    I really appreciate  for your support.

  • CFGRID does not show data (CF9.0)

    Under development server, CFGRID show data , all is fine , correct. (CF9.0  version dev)
    Under production server , CFGRID does not show data, only a grey line (like a HR).
    How to debug this ?
    Thanks,

    Kindly check below to troubleshoot this issue:-
    Is there any difference between your CF production & developement server setting summary?
    Is there any browser script level difference between your both CF server?
    Are you getting any relevant logging error in your CF server application.log & exception.log?
    Run a very simple cfgrid running app to check, either getting issue with that too or not.

  • In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie.  Is there someway to refresh the IPhoto event in IMovie?

    Background:  I'm transferring file folders from a Visa laptop via an external hard drive to my IMac.  In the folders are photos and videos from different cameras.  SO I first tried to import to IMovie but it would not recognize any of the files.  So then I imported into IPhoto and both photos and videos were imported and I created events for each folder.  When I first opened IMovie I had to wait for it to create "thumb nails".  Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events.  I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie.    I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie. 
    I'm doing this on three events with about 100 photos and videos.  But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie.   I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.  
    Appreciate any tips or pointers.
    OBTW this is my first question as a first time Apple owner. 

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

  • After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    Ok, the issue seem to be solved. The problem was this:
    The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
    By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
    And then LR is reading them and all metadata information has been set / read correctly.
    So this is solved.

  • PMI Problem (End-to-End Monitor does not show data)

    (End-to-End Monitor does not show data)
    As I know that XML Messages Alerts T-code: SXMB_NOMI shows all alerts including errors as well I put date Range: 01-01-2008 to 01-08-2008 and filters for "Errors" system does show more then 300 errors
    But problem in RWB - End-to-End Monitoring, when I click on display and date range 01-01-2008 to 01-08-2008 its give me graphical overview in right of window
    and shows summary:
    Errors:                     0  Average
    Open                  904  Maximum
    Successfully Completed         0  Minimum
    Overall:                  904
    I thing End-to-End Monitor doesn't get data from PMI...
    why does't show any errors, which is shows in SXMB_MONI
    Please tell me how to resolve that problem
    Thanks in Advanced
    Edited by: issue2008 issue on Aug 26, 2008 12:02 PM

    Hi,
    A destination pointing to the Integration Server is created on the J2EE engine to collect the data for the end-to-end monitoring. If this destination is incorrect or if there are several clients in the system of the integration server, the data may be sent to the incorrect client.
    This might be a reason so you can  implement the correction of the destination in a manual way as follows:
    Open the J2EE visual administrator.
    Select the Destination service.
    Select the HTTP "pmistore" destination.
    Enter the URL for the ICF service spi_gate of the Integration Server in the following form "http://<host>:<port>/sap/bc/spi_gate?sap-client=<xxx>", where 'host' denotes the host of the integration server, 'port' denotes the HTTP port, and xxx is the client of the Integration Server.
    Thanks,
    Hemant

  • Please see this query, not showing data Why?

    I created a report and write following query,it was working well since last 4 months but today automaticly not showing data I can undertstand why?
    Becuase I didnt make any changes in this query.
    Please help me
    Urgent
    SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
    MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
    MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
    MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
    MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
    MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
    MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
    MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
    FROM BUYER, MERCH_ORDER
    WHERE MERCH_ORDER.CANCEL IS NULL
    AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
    and merch_order.orderno not in
    (select export_order1.orderno from export_order1)
    ORDER BY MERCH_ORDER.ORDERNO

    Where "first table" is merch_order and "second table" is export_order1?
    How many distinct orders are in each table?
    Are there any NULL order numbers in either table?
    I'd put money on the fact that if commenting out a clause causes a number of rows to be returned, that clause is filtering out all the rows. You'll need to go through your data to figure out why the NOT IN clause is filtering out all your rows.
    Justin

  • Time of email shows in Date Column, Date is not showing on new emails

    Date is not showing in Date column. Only time is showing.
    I just migrated from OE - Old emails show the time & Date.

    If these are emails received today that is normal. Thunderbird assumes you know what day it is and only displays the time for messages received today. It will append the date to these messages at midnight tonight.

  • Due date is not showing up in UWL

    Hi ,
    Due date is not showing up in UWL. Back end is ECC not GP Just regular work flow.
    I can see in workflow object end date kind. But the field is blank. For due date any additional configuration needed.
    I really appreciate your help.
    Regards
    Mark

    Hi,
    As far as I remember correctly, the Due Date in UWL is the Requested End date in the workflow. So basically you need to open the workflow in backend in WF builder and look at the step. There is a tab for setting different deadlines and stuff. If you do the settings there (for example set the requested end in 3 days), I think that work item will display the due date based on that data.
    Regards,
    Karri

  • SSAS cube is not showing data

    Hi All,
    I have build a cube in ssas 2008. The cube processes successfully. but wheni browse the cube it does not show data.
    I check it in dsv Fact table--> Explore data --> it displays data. But i cannot see the data when i browse the cube.
    I have 3 cubes in one solution, there i also processed the complete solution. There is no problem with other cubes except for this one.
    I have only dragged the measure and not the dimension. hence i do not think there can be any relationship issue.
    Can anybody please suggest??
    Thanks & Regards, Chaitali Thaker

    Hi Chaitali,
    Check if the CALCULATE; command is present in the Scripts/Calculations tab.
    Ensure that you specify the relationship between dimensions and measure groups.
    Set any related dimension UnknownMember properties to Visible.
    thank you,
    Radhakishan

  • Data is not showing up in report on ODS

    Hi All,
    we have requirment like below
    we have an ODS  no update rules and nothing with 5 fields . with bex reporting flag checked..
    we have function module to fill the data for these 5 fileds in  ODS active data table .
    So data is there only in active data table that table was filling  by using  function module.
    so i need report that data .when i created and run the report data its not showing up.
    Please let me know whats the issues is and how to handle.
    I appreciate your help
    Regards,
    Sirisha

    In this case you need to use Write-Optimized DSO or if you are in earlier version, then you need to use Transactional ODSinstead of basic DSO.
    thanks.
    Wond

  • BizTalk BAM Data is not showing

    In BizTalk 2010,  BAM Data is showing correctly.
    But in BizTalk 2013, BAM Data is not showing correctly while I am applying the same procedure for both.
    Event Log shows not any error.
    What I have to check for getting BAM data in 2013 ?
    Which configurations should I check ?
    Any kind of help would be appreciated.
    Prakash

    Prakash,
    There are two parts to it:
    Deploying the BAM definitions, which would create the BAM activities and its related DB artifacts.
    Deploying the Tracking profile. This step hooks you port/Orchestration/messages to the db artifacts created in step-1.
    If you see the BAM tables and its related DB artifacts means BAM definitions has been deployed.
    If event log is clean, no data in
    TDDS_FailedTrackingData, no data in AllInstances view , you have checked the above suggestions like TDDS means, then it could be the second step  which is deploying the tracking
    profiles may not have happened properly.
    Check the following article for help:
    Deploying and Undeploying Tracking Profiles
    How to Deploy Tracking Profiles with the Tracking Profiles Management Utility
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Maybe you are looking for