2LIS_03_UM initilization and loading to BW

Hi All,
Currently we are installing the datasource 2LIS_03_UM and going to use the Revaluated value for the stock. We have already done the setup table fill up for data source 2LIS_03_BF and loaded into cube and done the compression, checking the no marker update tick.
Now the question is, Is the 2LIS_03_UM also should be filled setup table and has to be loded to cube 2LIS_03_BF and need to be compressed checking the no marker update tick? or is there any other procedure needs to be followed for this?.
Kindly provide me an idea to proceed.
Thanks,
Muruganand.K

HI
Yes, Need to setup and load Revaluations - 2LIS_03_UM also if any value changes are required.
Same as "BF", setup, loading, no marker update required.
After executing the menu entry, a dialog box appears in which you must specify
whether you want to carry out a setup for material movements (to be extracted using
the DataSource 2LIS_03_BF, Report RMCBNEUA, transaction OLI1BW) or for
revaluations (DataSource 2LIS_03_UM, Report RMCBNERP, transaction OLIZBW).
More info : [How Tou2026 Handle Inventory Management in BW|http://sap.seo-gym.com/inventory.pdf]
Srini

Similar Messages

  • I am using FCP 7.0.3.on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

    I am using FCP 7.0.3 on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

    .. and by the way, the jump from FCP 6.0.3 to FCP 7.0 (or higher) isn't an "update"  It's a full version "upgrade" that has to be done using the install discs (or disc images).
    -DH

  • Hi,  I'm in Nova Scotia, Canada and when I try to use Siri it loads and loads and then says, "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while."  I rebooted and it didn't fix the problem. I just got

    Hi,
    I'm in Nova Scotia, Canada and when I try to use Siri it loads and loads and then says, "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while."
    I rebooted and it didn't fix the problem. I just got my iPhone 4s (unlocked right from Apple) several weeks ago.

    Siri has been a bit more erratic than usual in the last week or so. Apple has announced a major announcement for 9/12. Conclusions are left to the reader.
    Best of luck.
    (Occasionally from Lower Economy, Colchester County).

  • Firefox is taking a long time to open and load my home page, didn't happen while the old version. Also stops responding frequently.

    Hello there,
    I have been a loyal user of Firefox since 2005 and have never had and issue with this browser. It has been my top choice when it comes to using it in my devices along with suggesting to other people. The problem I have recently began to experience happened after updating to the newer version...4 or 5, not sure which. My Adobe Flash player is up to date and have no add-ons running that are not part of the default browser.
    When I click the icon it takes a long time for the window to show up and a good minute before the homepage shows up and is functional to use. I never had this issues with previous versions so I am assuming there might be some bug causing this particular problem. Also, when I am playing games Firefox decided to stop responding and I have to force quit so my games don't suddenly slow down. I am running Mac OS X 10.6.7; I also tested opening Safari and it opened and loaded the homepage is about 3 seconds, I don't wanna have to switch unless I have to. Any help is appreciated, thanks. :)

    Hi Donekes,
    First off I need a little more information to help with troubleshooting.  You say that an error occurs when you "try to re-open the same problem app before the old session completely exits".  Does the error have an error code or dialog display?  It may also be possible to receive an error log.  Here is a knowledge base that explains how to retrieve error logs.
    http://digital.ni.com/public.nsf/websearch/54E361E3FF477EC186256C320068184F?OpenDocument
    If you are able to get that information then please post.  Have a good day.
    Brian K.

  • Update to IOS 6 has been a nightmare. Facebook would allow me to save pictures unless I granted access to my foto album. Does this mean my pictures are going be planted all over the web? The safari keeps crashing and loading is slow.

    update to IOS 6 has been a nightmare. Facebook would allow me to save pictures unless I granted access to my foto album. Does this mean my pictures are going be planted all over the web? The safari keeps crashing and loading is slow. Most infuriating is that YouTube was deleted from my entertainment apps and I now have to pay for it if I want it back!! This is a bloody disgrace.

    Back up all data.
    Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

  • My iPhone will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings. I have no back up of my phone I've also tried the home/sleep button thing but nothing

    My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone

    That does happen.  It depends on how hard the server is being hit, as well as the connection speed of your system.  If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

  • How do I configure DW to open and load a file?

    I have DreamWeaver CS5 running on a Mac. Whenever I double-click to open a DreamWeaver compatible file (such as an HTML file), if DW is not already open, DW launches but does not load the file. Once DW is launced, I can double-click the file and it will load. How do I configure DW to open and load a file together?
    DW: v11 b 4993
    OS X: 10.7.4 (11E53)

    HTML files are normally configured to open in a browser. The default on a Mac is to open the file in Safari.
    You can right-click the filename in the Mac Finder, and select Open With > Dreamweaver CS5 from the context menu.
    Alternatively, select an HTML file in Mac Finder, and press Cmd+I to open the Info panel. In the Open With section, select Dreamweaver CS5 as the default program, and click the Change All button.

  • HT1151 I have my iTunes library on an external hard drive that was connected to a PC, now I want to connect to my new iMac and load the iTunes library onto that computer, can I do that?

    I have my iTunes library on an external hard drive that was connected to a PC, now I would like to connect that hard drive my new iMac and load the iTunes library onto that computer, can I do that?  Looking for a solution that keeps me from re-ripping my CD collection.

    Here are the official Apple Support instructions:
    http://support.apple.com/kb/HT4527
    Ciao.

  • Multiple Convert/Dump and Load tasks in a single SSIS package?

    I'd appreciate some input. We have a single data file that has about 1,000,000 rows of data spanning 28 time periods in the columns across each row. The file is too large to import at one time, and so we have created 9 different transformation files to pull subsets of the timeperiods using MVAL. The end user does not want to have to break apart the file and/or schedule 9 separate imports to bring this file in each time. So, I've attempted to create a single SSIS package that runs each of the 9 required component imports, but I'm running into the following error any time that I try to run more than one import at once:
    An error occurred while running a packageException of type 'System.OutOfMemoryException' was thrown.
    I've tried using a ForEach loop to simply loop through each of the transformation files and run an import for each transformation file it finds. But, I understand that SSIS doesn't release memory until the end of the ForEach loop, which would explain an out of memory issue. I then broke it out and specified 9 distinct Convert task and 9 distinct Dump and Load tasks in the package with an order of Convert 1 --> Dump and Load 1 --> Convert 2 --> Dump and Load 2, etc. This results in the same out of memory issue any time I enable it to run more than 1 convert/dump & load task in the package - they are not running simultaneously, but rather sequentially. I don't understand this. In looking at the logs, it looks like it's creating the temp files for the first import and adding them into BPC, and then creating the temp files for the second import but then fails prior to the second load. This will work for a smaller data file, but shouldn't the memory be released after the task and allow subsequent tasks to complete? Any recommendations on how to address this and automate this load?

    Quick update - I created unique ssis packages for the distinct imports and called those packages from within the initial package that is kicked off through Data Manager, and I ran into the same out of memory issue. Any ideas, suggestions, or help would be greatly appreciated.
    Thanks!
    Josh

  • How do i add a new phone to my itunes account and load my backup

    how do i add a new phone to my itunes account and load my backup

    The bottom section (iTunes part) gives instructions. The first few panels discuss backing up the old phone but then it gets into restoring to the new phone: http://support.apple.com/kb/HT2109

  • How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi?

    How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi? There is probably a trivial, easy way to get this info, but I have not yet found it!  Thanks..

    Or if you want to grab all the paths programatically, try the attached VI.
    Open the top level that you want all the paths from and close all others, then open the
    attached and run it. It will return an array of all the VIs that the VI
    in question uses, including vi.lib VIs. You can filter these as well if
    you like.
    Ed
    Message Edited by Ed Dickens on 08-01-2005 07:01 PM
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
    Attachments:
    Get all paths.vi ‏29 KB

  • I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however i

    I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however it is asking for my serial number which I have misplaced. I am unable to trace my serial number anywhere. I have even checked my adobe membership to locate my serial number but it does not seem to have any record which is strange as I have been using this software for over a year now and the previous versions since 2009. Could someone help me in my predicament.

    Contavct Adobe support thru chat:
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

    New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]

  • SQL error while activating DSO and loading Mater Data

    Hello Experts,
    we are having process chains which include process activating DSO and loading to Master data,
    while executing achai, we are getting error:
    An error occurred during confirmation of process 000008. See long text
    Message no. RSODSO_PROCESSING024
    Diagnosis
    Note the detailed system message:
    An SQL error occurred when executing Native SQL.
    when i go to T-Code: ST22
    the diagnosis is below:
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Date and Time          20.05.2010 22:18:02
    What happened?
         The database system detected a deadlock and avoided it by rolling back
         your transaction.
    What can you do?
         If possible (and necessary), repeat the last database transaction in the
          hope that locking the object will not result in another deadlock.
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
    Could you please help me out how can i deal with this issue, .
    Regards
    Sinu Reddy

    it seems that the target you're loading to is already locked by another load...if it concerns a master data is also possible that the master data is locked by a change run. check your scheduling and make sure you don't load the same target at the same moment...
    M.

  • My  ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift   restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible

    my  ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift + restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible

    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

Maybe you are looking for