2lis_03_um setup table

Dear all
I am currently working on stock, for that data sources BX, Bf are successfully loaded into the cube 0IC_C03 . but i now am trying ti fill the setup tables for UM data source  it is throwing error "fill in all required  fields".
I have given "name of run, termination date and time, and selected rerun check box". Please some one help me if i miss anything?
Pl confirm is it mandatory to give "document data restriction " like company code, year ....?
Thanks
Bhaskar

Hi Bhaskar,
For any screen where you see below (yellow)highlighted tick mark then it is a mandatory field on the SAP screen and you have to provide a input criteria.
So in case of UM datasource you have to provide company code for setup tables.
Thanks
Amit

Similar Messages

  • 2lis_03_um setup tables issue

    Hi experts,
    we have taken downtime to fill the setup tables for inventory.
    MCNB - 2lis_03_bx
    OLI1BW - 2lis_03_bf
    OLIZBW - 2lis_03_um
    we have the company codes 1100,1200,1300,2000,2800 at the moment in ECC.
    but we will have more company codes coming up in next 2 months.
    here my doubt is if we fill the setup tables for the above company codes for material revaluation (OLIZBW), do we need to take downtime again to fill for the upcoming company codes??
    OR if u know the upcoming company codes then we can fill the setup tables for those company codes also, even there is no data once the new company codes starts the deltas will be coming into BW, instead of taking downtime again and fill the setup tables for the new company codes?
    Please clarify these issues.
    Regards
    venuscm

    Filling setup table wouldn't be required for the upcoming company codes..
    Since delta captures new and changed records, the new records for the upcoming company codes will be captured in the delta loads, hence there is no need to fill up setup tables again for the upcoming company codes.
    The only thing you have to do this either dont give any selection for company code during initialization or include the upcoming company codes also in the selection if required during initialization.
    --- Thanks...

  • Error when running setup table for 2LIS_03_UM

    Hi experts,
    When running the setup table for 2LIS_03_UM, we got the error message "Plant FP01 does not exist." Any suggestions on how we can fix this?
    Thanks,
    Donna

    check if this plant has been maintained in source system or not. If not, ask the concerned team to maintain it.
    Another way may be to allow error records which should ignore errornous records and rest should be filled in setup table.
    Regards,
    Gaurav

  • Problems with filling of Setup table for 2LIS_03_UM

    I am not able to fill up this table. I mean its not getting filled thorugh TCode OLIZBW.
    Setup table for 2LIS_03_BF is getting filled up though.
    Can anyone foresee what can be the reason.
    Thanks PB

    Nope I am not. But the problem I have posted in my last note that i was getting -ve stock values which was resolved when i loaded the data with infosource 2LIS_03_UM in development. when I am testing it in QA I am not getting dat in this extractor.
    I had a chat with MM Functional Consultant , he said I probably wont get this data.
    Now I am not sure how will I be able to resolve the problem.
    Regards
    PB

  • 2LIS_03_UM - FULL LOAD VIA SETUP TABLE NOT EQUAL TO DELTA

    Hello,
    I try to load stock data with 2LIS_03_UM.
    When I extract data using setup table and full load I don't get the same records as I get with delta load. Although the key figures values are the same, the documents numbers are different. Most documents from delta load are ML (material ledger) documents while documents from full load (via setup table) are mainly FI documents.
    What can be the reason? How can I fix it?
    Thank you,
    Hadar

    Hi,
    Delta load extracts data from Delta Queue based on your update mode selected in LBWE.
    Full Load or Init load extracts data from Setup tables, here if you are extracting data from setup tables ? did you fill the setup tables now or not after deleting the existing data of the setup tables?
    are you getting same values when compare to R/3 and BW data for some document numbers?

  • Filling setup tables for 2lis_03_um

    hi
    i am trying to fill setup tables for um. its nott allowing me, i gave name of run and date and time .
    its asking Archiving Run  . i am trying to give or f4 its not allowing me?
    please let me know

    Hi Suneel........
    Check this thread by Roberto Negro......
    Archive run.
    Hope this helps.....
    Regards,
    Debjani.....

  • Setup tables Inventory Management

    Hi,
    I want to fill setup table for BX via tcode MCNB (in R/3).
    Can I start with the setup table for BF using tcode OLI1BW parallel or I have to wait till the job RMCBINIT_BW (tcode MCNB)
    is finished!
    Same question for UM: Can I start the setup table for UM (tcode OLIZBW) parallel with the job RMCBNEUA (tcode OLI1BW)
    or I have to wait till the job RMCBNEUA is finished!
    Is there any possibilty to enter more company codes for the setup table for UM (tcode OLIZBW) as we have 120 company codes
    Or I have to plan the job for each company code separtely.
    Moreover I will load data (first opening balance, movement, revalaution) into BW when the setup tables are filled on R/3 side.
    Is it ok?
    Thanks for the answer.

    Hello Moha,
    Yes, Venkat, is right.
    This is the order
    2LIS_03_BX3 Material stock (Parallel)
    2LIS_03_BF Material movements (Parallel or with UM)
    2LIS_03_UM Revaluations
    Please see this Inventory Document
    [How to Handle Inventory Management Scenarios in BW (NW2004)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
    [Non-Cumulative Values / Stock Handling|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31]
    Thanks
    Chandran

  • 2LIS_03_UM setup required field

    Hi, Guru, I am facing a very strange issue here. When I am in R3 trying to fill the setup table for 2LIS_03_UM, it requires that a value in company code to be provided. We have more than 100 company codes, I really don't want to run setup table by company code 100 times. Here is the error msg if I don't provide a value for the company code. I tried with '*' and hope that it will include all values but that didn't work.
    Fill in all required entry fields
    Message no. 00055
    Diagnosis
    You have attempted to update data or start an action. However, not all required information was specified.
    System Response
    The system could not execute the action.
    Procedure
    Enter all required information. Fields in which you must enter data are prefilled with a checkmark or question mark ("?") by the system. If the current screen contains tabs, check all tabs to make sure you have filled in all required fields. Then restart the action.
    Thanks in advance
    Chimei

    No, the company code is a single value selection. I can put ranges for document number, fiscal year or posting date but not company code.
    I am not able to post a screen shot but here is the basic layout of the screen. you can see that there is no "to" for the company code below and it is required which is the issue I think. The other fields are all optional.
    Archiving Run
    Company Code
    Accounting Document                                to
    Fiscal Year                                        to
    Posting Date                                       to
    Name of Run
    Termination Date                05/06/2011
    Termination Time                16:36:47
    Chimei

  • 2LIS_03_UM setup

    Dear Gurus,
    I have already setup the tables for 2LIS_03_BX and 2LIS_03_BF, uploaded them in the cube 0IC_C03 and compressed suitably.
    For filling the setup table for 2LIS_03_UM, when I execute OLIZBW, company code is mandatory. As I have 6 companies, I gave * for company code but no records get picked up.
    If I decide to do 2LIS_03_UM setup 6 times for 6 companies, do I have to make the table MC03UM0SETUP blank 6 times? Do I have to do INITupload in the cube 6 times and then DELTA also 6 times?
    If I do "deletion of setup data" (Tx LBWG) 6 times, will it have any side effect on the 2LIS_03_BX and 2LIS_03_BF which have already been setup and uploaded in the cube.
    Kindly advise.
    Regards
    Lalit Kumar Jain

    Iam filling the setup tables for 2LIS_03_UM for one company code. And when iam checking the setup tables after that ,iam not able to find any rows in it.
    I checked RSA3 also. No data...Please suggest what to do.
    I have already loaded 2LIS_03_BX and 2LIS_03_BF into cube and compressed them as per the setting required.Now iam trying to load 2LIS_03_UM also..

  • Fill setup table 2LIS_03_BX and 2LIS_03_BF at same time

    Hi Guys,
    Can someone tell me whether I can run background Job to fill setup table of 2LIS_03_BX and 2LIS_03_BF at the same time?
    By the way, whether I can run background job by different sever using different filters(site range A, B, C) to filling setup table of 2LIS_03_BX?
    Thanks.
    Regards,
    Rojay

    Hi Rajesh,
    All three data source have setup table concept.
    LO extraction means you should fill the setup tables.
    2LIS_03_BX (Stock Initialization for Inventory Management)
    2LIS_03_BF (Goods Movements from Inventory Management)
    2LIS_03_UM (Revaluations) - captures revaluation data.
    please refer the below document for your reference.
    SAP BW - Inventory data loading step by step(0IC_C03)
    Inventory Data Loading (MM) to BW PRD system
    Thanks,
    Phani.

  • What other datasources require building setup tables

    1)Hi I would like to find out if there are any other datasources in other application areas that require a build of setup tables and then
    facilitate deltas ?
    2)what are the standard data sources for PP, QM, WM most commonly used.

    Hi,
      Only LO cockpit datasources require filling up of datasources. You can check transaction LBWE, it should give you a complete list.
    For PP, most common datasources that I have come across are 2LIS_04_P_COMP and 2LIS_04_P_MATNR
    For QM, 2LIS_05_QE1 and 2LIS_05_QE2, for WM which i think is the same as MM, its 2LIS_03_BF and 2LIS_03_UM.
    Hope this helps,
    Regards.

  • Down time for 2LIS_03_BX setup table

    Hello SDN,
    I have data reconcilation issue in my BW server for inventort managenent, for data source 2LIS_03_BX and 2LIS_03_BF. For this I have to refill setup table of 2LIS_03_BX in R3 server. For filling setup table for R3 system I need to ask for down time from cleint
    I NEED TO KNOW HOW DO I CALCULATE REQUIRED DOWN TIME FOR FILLING SETUP TABLE FOR DATA SOURCE 2LIS_03_BX.

    Dear Pravender,
    I understand your statement (" For the complete load, check in how much time you can do initialization? That much down time only you need, later you can fill setup tables for history data and load.") as to follow following steps:
    1. In the down time, start initialization without data transfer info package in BIW for 2LIS_03_BF and 2LIS_03_UM.
    2. Then during up time (after releasing down time, transactional data posting allowed in R3), fill setup table for 2LIS_03_BX.
    3. Run full upload info package for 2LIS_03_BX
    4. Start Delta info package for data sources 2LIS_03_BF and 2LIS_03_UM
    Let me know if I am right for the above procedures. These steps will allow us take very less down time.
    Thanks for the reply
    Regards,
    Jaydeep
    Edited by: Jaydeepsinh Rathore on Sep 4, 2009 8:23 AM

  • Error while filling setup table

    Hello all
    I am trying to fill a setup table for 2lis_11_vahdr DS. I deleted setup table firts using LBWG and then proceeded the setup process by using OLI7BW , while i did that i got an error message "Error determing rate:foreign curr.DEM local curr.EUR date 02.01.1997(doc 4969)"
    could anyone tell me what this error is referring to ?
    thanks

    Hi DK.............
    I also think this is a problem of Exchange rate only..............maintain the exchange rate in SPRO >> General Settings >> Enter Exchange Rates.(Tcode : OB08 )
    Exchange rate table is TCURR.
    Exchange rates are maintained in r/3 and transfer to bw.................rsa1>>source system>>r/3 source system>>right click Transfer...........
    Regards,
    Debjani...........

  • Error while Filling a setup table

    Hi,
    While i filling a setup table, i got this error message,
    "Error determining Rate:foreign curr .local curr
    INR date 27.06.2007 (doc.8166) "
    any body tell me the meaning of this and how to rectify it.
    -Arun.M.D

    Hello Arun
    You are getting this error because Currency Exchange Rate is not being loaded to your system for INR. Ask FI team to maintain this.
    Reward points if it is helpfull.
    Thanks
    Tripple k

  • Enhancing the standard  Data source without deleting setup tables

    Hi all,
    I am in the the Support Project. My requirement is I want to Enhance u201C2LIS_13_VDITMu201D LO- data source with two fields without disturbing the delta.
    Please suggest me how I have to do this.
    As Per my Knowledge ,
    1. we have to delete setup tables
    2. Enhance the data source & re populate the setup tables.
    3. Delete the data in the cube & add the two new fields in the cube & repopulate the cube with new Initial .
    4. after that delta will be enabled through job control.
    But this process is not suitable for our requirement because delta was enabled long back it is going very smooth till date, I donu2019t want to disturb that process.
    So please suggest me is there any other procedure to do this.
    Thanks,
    Kiran Manyam

    Hi,
    If historical data (loaded earlier in to BW) are not required for the two enhance field, then it is not required to deleted the setup table and reload them to BI.
    In this case simply you can follow the following procedure.
    1. Enhance the fields, and update the transfor structure(to unhide these fields). In BI update the required data target with respective IO. and in exit populate the enhance fields. No need to disturb the delta
    2. Replicated the DS in BI and do the mappings in tranformation.
    Here the existing delta is working, and you will be populating the two fields in the exit only.
    Thanks,
    Jugal.

Maybe you are looking for

  • ITunes Freezes my Mac Mini - Power Cycle Required

    Hi, If I leave my Mac unattended for long periods of time with iTunes open (whether playing music (it helps negate my tinitus) or not), my machine becomes completely frozen and needs to be powered down. If I leave it without iTunes open, it does not

  • In iOS 7.0.2, Appstore updates can not see updated apps

    Hi. i am using iPhone 4S with iOS 7.0.2. I am updating some apps when updates comes but when i look notification center , some times i can see updated apps in notification center and the problem is Appstore updates can not see in all items .And some

  • How can i import old projects (Final Cut Pro 10) to the new (final cut pro 10.1.1)?

    Hi everyone, I have a folder full of backup projects and events of Final Cut Pro X. Now, I have Final Cut Pro 10.1.1 and I don't know how to use those projects, since they were in a different folder. Yhanks very much Bruno

  • Message class

    Hi, I have created amessage in the message class ZUP as &&&& in message number e000.In the program if a certain condition is not satisfied,it has to give error message as 'either select the file,or enter the plant and materials, but not both'. I gave

  • JAAS LoginModule - how do I get path, port, resource accessed, etc

    Hi, I checked everywhere including the forums, but could not get any info on this. I'm writing a custom JAAS LoginModule for the WebAS 6.40 server. I'm trying to figure out how to get the following out of the request from within login() or initialize