2LIS_04_P_ARBPL Delta not captured from extraction queue

I am using datasource 2LIS_04_P_ARBPL to load 0PP_C03 cube. I have setup init selections as follows
0PRODORDER     AUFNR     Order Number     6000000000     6999999999
0COORD_TYPE     AUART     Order Type     ZCP1
0PLANT     WERKS     Plant     1010
In short I have the selections for entire range of production orders for a given plant and order type.
I have populated setup tables, did init load with data transfer, activated the update in LBWE, scheduled V3 job, no issues here.
When we create new production orders they are available in extraction queue MCEX04, when V3 job runs it makes it to delta queue, available in RSA7, loads into BW when delta load is done.
Ths issue is when we TECO a production order (status marked complete) to same production order which we just loaded as delta, it does makes it to extraction queue MCEX04, but when V3 job runs it is not available in delta queue, RSA7. May I please know if this is standard behavior of this extractor or I am missing something? Why the same production order is now getting filtered by V3 job?
Any help will be appreciated.

Hello
I am also facing same issue.
but in my case, I not mapped 0recordedmode with rocancel in transformation.
My scenario : DS(2LIS_04_P_ARBPL) ---->DSO(Stranded DSO) ---> Info Cube. DSO and Cube is Z object.
In cube I am having 2 records: 1 is Correct and 2nd is bad(Minus or 0 values) record.
That bad records fetch in report with Minus or 0 values not correct one.
Please let me know if have any concern on this.
Thanks is advance.

Similar Messages

What is a good video converter for iMac? Premiere 6 will not capture from the Canon VIXIA HF G20.

What is a good video converter for iMac? Premiere 6 will not capture from the Canon VIXIA HF G20.

Rather than convert, you'd be better off capturing with a more current version of the program -- one that supports AVCHD video. Otherwise, you're in for a lot of headache. A converter isn't going to solve your problems.
BTW, when you say Premiere 6, do you mean Premiere 6 -- which is over 10 years old? (There was no Premiere Elements 6.)
Trust me on this: Capture with a Mac version of Premiere Elements 11 or 12 and your video will be perfectly compatible with any Mac program.

Can not capture from Sony HDV 1080i (recording in 60i)

Hello
We are trying to capture from the above camera to a Mac Dual G5. We are using FinalCutPro 5.1.2. We are using a FireWire 400 cable to connect to the front of the computer (have also tryed back of Cinema Display). The footage was captured in HDV1080/60i, and we have tried the corresponding formats in Easy Setup (Basic, standard, Apple Intermediate).
The problem: we can control the camera from the Log and Capture windows, but when starting capture, no data is coming in, and the program therefor gives up after a few seconds (displaying a no data error message).
We have tried Batch and Now capture. We can log clips, and get the correct time code, but can not capture those clips due to the no data problem.

This is a good workaround for curing your camera recognition problem with FCP (if that's what it is):
First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
http://docs.info.apple.com/article.html?artnum=301852
Follow the instructions carefully and you should have things running in no time - it's quite safe but you must Trash the Receipts AND re-install QT from the link provided.
If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
Still not working? Try a different Firewire cable.
Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
Let us know how you get on!
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Dequeued messages not deleted from one queue but other works

Hi,
I have a multiconsumer queue with two local subscribers.
The messages go to the 'PROCESSED' state but do not get
deleted from the queue table.
As a test, I created another single consumer queue in a different andqueue table, but the oracle deleted the 'PROCESSED' messages as expected.
In the multiconsumer queue, the messages are added by a trigger on the table. The enqueued messages varies from 100000 to 10000 per hour.
aq_tm_processes = 5
job_queue_processes=4
What else can I do debug the problem?
Is there any log file on the database server that I can
look at any potential problem.
I would appreicate any responses. This could very well
be a newbie problem. I have not worked on advanced queues
before and nor has anyone else in our system.
Thanx,
HB.

I forgot to add that I am using default retention time
and when I query user_queue the retention time is set to zero for the multiconsumer queue.

In dealer Invoice , Excise duty values not captured from MIGO

In dealer invoice , I have changed excise duty values in MIGO . This is not captured in MIRO. But the system took excise value from default values ( from FV11 condition record ) . This is happening for New plants. Old plants works good.
Regards.,
Lakshmanan.S

hi,
create a PO with zero tax code. such that base amount is equal to the inclusive of all excise duties.
IN migo select the capture and post excise option, in the excise tab, activate the mrp indicator .
change the base value in the migo and manually enter the excise duties in migo, capture it and then post
create MIRO with reference to the PO and give the taxcode as V1(ED-8%CESS-2%HECESS-1%)instead of VO(ZERO TAX CODE)
Regards,
velu

MIRO issue (urgent!), amount and quantity fields are not captured from PO

Hi,
When we try to post thought MIRO using PO as reference, quantity and amount fields are not captured. We do MIGO first and then MIRO.
GR based invoice verification in the vendor master is selected and the check mark GR-based in the PO is selected too.
We're getting this MIRO issue for "all" PO and Service Entry Sheet.
We'll appreciate your recommendation in order to fix this critical issue as soon as possible.
Thanks in advance.

I was looking for copy controls and other functions. Glad this is now resolved. You need to award yourself points!
Cheers.

Messages are not dequeing from the Queue

I am using Oracle Advanced Queueing.
PL/SQL API for enqueue
JMS API for Dequeue Messages asynchronously (register listener and using onMessage())
It is multi consumer queue.
The program used to work fine. Now, it has stopped. Now, we can enqueue as
many messages as we want. The subscriber does not recieve any messages. BUT,
once we disconnect subscriber and connect again, the subscriber gets all the
messages in the queue. You can repeat this N times.
I sent this java program and sql scripts to Oracle support and they ran it successfully in their environment. So it appears to be some weird environment problem.
Question:
Did anybody have problem like this?
Does anybody have any ideas about what to check in Oracle/Java client environment?
We use Java SDK 1.2.2, thin JDBC drive and Oracle 8.1.7
Thanks for reading this message.
Vlad.
null

EMON is running:
oracle 1105 1 0 Apr 28 ? 0:03 ora_emn0_wmdev
And there are two trace files, but nothing interesting inside (they don't change when I run java client):
-rw-r--r-- 1 oracle dba 107 May 2 18:01 PLSExtProc_agt_5404.trc
-rw-r--r-- 1 oracle dba 107 May 2 18:06 PLSExtProc_agt_7021.trc
PLSExtProc_agt_5404.trc
Remote HO Agent received unexpected RPC disconnect
status 1003: ncrorpi_recv_procid, called from horg.c
PLSExtProc_agt_7021.trc
Remote HO Agent received unexpected RPC disconnect
status 1003: ncrorpi_recv_procid, called from horg.c
null

Movement types data not capturing from BW cube data load

Dear Experts,
We are supporting BPC 10.0 Netweaver consolidation activities.
As a part of the monthly consolidation, we are loading the ECC data available in the BW cubes into BPC.
0FIGL_C10 cube: From this standard cube we are capturing the movement types (i.e, transaction type details) for the balance sheet items. So opening minus closing should be equal to the movement types.
ZFIGl_CA10 : From this cube the YTD closing balances of the balance sheet items are captured.
Opening balances are copied from the last period of the previous year through balance carry forward.
For a balance sheet itens, we are getting the F99 closing balances correctly captures.
But, the movement types are not getting captured correctly and the difference between the (opening + movements) - closing is sitting the controls.
I have tried to check ECC data for these accounts in FS10N and 0FIGL_C10. The monthly data is all flowing properly. But when coming into BPC movement type alone has the problem.
The transformation and conversion has all worked fine time June 2014 but July 2014 it has incorrect figures.
No modifications are done for both the file.
Please find the below attached screen shot and kindly help me on the same.
Regards,
Shilpa

Hi Shilpa,
I had the same problem in mi last consolidation implementation and the solution in this case was
implement all the data flow for the 0FI_GL_014,
Regards,
Mario

Oracle AQ: Message not removed from source queue after propagation

Hi.
I have been playing around with a test setup for a "fanning out"-propagation system.
I have created three queues, SRC_Q, DEST_Q and DEST2_Q.
The propagation seems to work fine, the messages that I put on the SRC_Q get propagated to the destination queues. However, after propagation the message does not get removed from the source queue. Could anyone tell me why?
I am using Oracle 10g.
Here is my setup:
--Test payload
CREATE OR REPLACE TYPE test_payload AS OBJECT(
test_id NUMBER,
test_dt DATE);
commit;
DECLARE
subscriber SYS.aq$_agent;
BEGIN
--- Create Originating Queue and start it
DBMS_AQADM.create_queue_table( queue_table => 'SRC_MQT', queue_payload_type => 'Test_Payload',
multiple_consumers => TRUE );
DBMS_AQADM.create_queue( 'SRC_Q', 'SRC_MQT' );
DBMS_AQADM.start_queue( queue_name => 'SRC_Q' );
--- Create Destination Queue and start it
DBMS_AQADM.create_queue_table( queue_table => 'Dest_MQT', queue_payload_type => 'Test_Payload',
multiple_consumers => TRUE );
DBMS_AQADM.create_queue( 'Dest_Q', 'Dest_MQT' );
DBMS_AQADM.start_queue( queue_name => 'Dest_Q' );
--- Create Destination Queue2 and start it
DBMS_AQADM.create_queue_table( queue_table => 'Dest2_MQT', queue_payload_type => 'Test_Payload',
multiple_consumers => TRUE );
DBMS_AQADM.create_queue( 'Dest2_Q', 'Dest2_MQT' );
DBMS_AQADM.start_queue( queue_name => 'Dest2_Q' );
--- Add Subscribers and schedule propagation
subscriber := SYS.aq$_agent( 'test_sub', 'Dest_Q', NULL );
DBMS_AQADM.add_subscriber( queue_name => 'SRC_Q', subscriber => subscriber , queue_to_queue=> TRUE);
subscriber := SYS.aq$_agent( 'test_sub2', 'Dest2_Q', NULL );
DBMS_AQADM.add_subscriber( queue_name => 'SRC_Q', subscriber => subscriber , queue_to_queue=> TRUE );
--Propagation to queues
DBMS_AQADM.schedule_propagation( queue_name => 'SRC_Q', destination_queue => 'Dest_Q' );
DBMS_AQADM.schedule_propagation( queue_name => 'SRC_Q', destination_queue => 'Dest2_Q' );
commit;
END;
--Put something on the queue
DECLARE
message_handle RAW( 16 );
MESSAGE test_payload;
nq_opt dbms_aq.enqueue_options_t;
nq_pro dbms_aq.message_properties_t;
begin
nq_opt.visibility := dbms_aq.immediate;
nq_pro.expiration := dbms_aq.never;
MESSAGE := test_payload( 2, SYSDATE );
DBMS_AQ.enqueue( 'SRC_Q', nq_opt,nq_pro,MESSAGE, message_handle );
COMMIT;
END;
I am really stuck with this problem so I really hope somebody have some advice on what I am doing wrong.

I am also facing a similar issue. I have a multiconsumer queue. The message has been dequeued but the message is still present in the queue table and the message is also present in AQ$<queue_name> and the state is being shown as 'processed'.
This all was working fine few days back and somehow stopped working all of sudden. The DB version which I am using is - 11.1.0.7.0. Any help related to this will be greatly appreciated
-AA

TA20637 I have a print job that I can not delete from the queue.

When I try it says "job is completed and can not be deleted from queue" but it seems to be stuck (and keeps reprinting rather than letting me print other documents). What do I do? I tried clearling the printer queue by turning the printer on and off but that is not dumping the cache.

So, you can't select it in the queue and Delete it the usual way...
If nothing else works, you may need to remove printer from the list in System Preferences Print & [Scan/Fax] pane. Then add it back.
And if NOTHING else works, you can also Reset printing system. This removes ALL printers from the list and resets the overall printing system. The command is in the same System Preferences pane. Right (Control) click on the list of printers and select Reset printing system. This time, you'll need to add all of your printers back.

Unable to initialize video deck, (can not capture from camera)

Hello All,
I am using a quad core G5 and am trying to capture some footage into Final Cut Pro version 5.0. I have two Panasonic DVX 100B mini DV cameras. I normally capture with a JVC BR-DV3000 mini DV deck but it is currently not working. So I'm trying to capture using my camera.
I hooked my camera up to my computer via firewire and started final cut, When I click File > Log and capture a little window pops up that reads:
" Unable to initialize video deck. You may still log offline clips or use Capture Now"
I'm not sure why this box is appearing. When I click the capture now button, the Capture window pops up and then I press play on the video camera and the footage plays on the camera but the capture window remains black or empty. I have tried both cameras and two different firewire cables with the same results. I have also tried to restart the computer.
Can anyone shine some light on this situation?
Thank you so much for your help.
Mike Wardynski

Are there any other firewire devices connected to your Mac?
Did you go into your easy setup and reselect the DV setting for the standard you are using?
Also sometimes, shutting down and restarting your Mac, after making these changes some times allows the new device to be recognized.
One other thing, the DV camera may have a menu setting that needs to be set for communication via firewire possibly?

Help requires_A Safety Belt for Logistics Extraction Queues

Hi All,
I have read the Blog "A Safety Belt for Logistics Extraction Queues" and it is very useful for taking the backup data from Extraction Queue.
I have a set of Queues related to this BLOG.
1. Suppose, i have created the Backup table for the Particular Application (Ex 03).And i am scheduling the Job from the JOb Control of LBWE.Will it pull the data from Backup table or with the Standard Table. How can i pull data based on our needs.
Pls suggest on this.
Thanks,
Jelina.

Dear All,
Anybody has tried performing the Backup of LBWQ data in ECC. How to pull data from backup table to RSA7.
Pls suggest.
Thanks,
Jelina.

How to check that Delta is not captured?

Dear Experts,
I am using 2LIS_02_ITM datasource.
PO is created using a program.
The next step in the program, it can change a field in the PO depending on logic, using a abap command 'update'.
Sometimes, this change is not captured in the delta queue, it seems.
why i say this is the PO shows the field value but BI delta load does not.
It is using Queued Delta now.
Initially, the program uses a command 'update' to update the field in PO.
Now, we decided to use ME22N program to ensure delta will be created.
The problem is happening to some records and not all delta records.
Its very difficult to tell what is the cause.
What is the standard method to check that Application table data is not captured in Delta Queue by the extractor?
Or
If PO can show the field value, is there a possibility that Delta may not capture this field change?
regards
Pascal

Well just throwing few possibilities:
1 - Basically PO creation, change in values/quantities etc are Business transactions and they generate evens known as BTEs.
Now we have to explicitly inform SAP ECC that which applications can use BTEs and we do this by tcode BF11.
Check if the software component creating and changing POs is properly linked to BTEs and if BW is set as active in BF11 tcode.
2 - If point 1 is checked and nothing is found to be incorrect, please check if Industry sector is correctly chosen (SBIW). Industry sector generates a set of Transaction keys (BWVORG) without which the values are not updated in BW.
Also rightly pointed by Tbollo, you need to ensure that there's a pattern in the missing docs to identify the rootcause.
Debanshu

What is differences extraction queue, delta queue and uddate queue ?

hi guru's
What is differences between extraction queue, delta queue and uddate queue ? can u describe briefly?
Thanks & Regards
nandi

Dear Prabha,
Basically when any document is posted in R/3, it is updated to the update table, from there it is taken to our delta queue for send it to BW side.
When extraction starts, data is sent to BW from delta queue. then again this cycle starts.
When you post any document in OLTP system (eg SAP R3),
say create sales order by VA01, then posting is made to application tables (VBAK/VBAP) through V1 and also to sm other tables through V2, Communication structure written to update queue/extraction queue/delta queue(directly) as per the update mode selected. V3 is always followed by V2 and we are supposed to schedule it.
From this delta queue, data is extracted by BW infopackages.
There are various update methods according to which extraction or delta queue are used, so when document posting takes place it also write data into extraction queue (through V1 update) and if we use queued delta method then this data is collected in collection run and written to delta queue and from this delta queue we request for data from BW.
There are lots of posts on SDN for this, please have a look on those.
one for your reference...
https://www.sdn.sap.com/irj/sdn/profile?userid=3507509
Hope it helps...
Message was edited by:
Ashish Tewari

DELTA QUEUE&EXTRACTION QUEUE

hi all,
1.what is differnce b/ween delta queue &extraction queue
2.wt's delta modes adavatages & disadvantages? where we usd these delta modes?

Hi there, I am fine thank you.
[you can call(write) me by my name i.e. Ashish.]
I am sending you all links:
1. SAP Network Blog: LOGISTIC COCKPIT DELTA MECHANISM - Episode one: V3 Update, the serializer
<b>/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
2. SAP Network Blog: LOGISTIC COCKPIT DELTA MECHANISM - Episode two: V3 Update, when some problems can occur...
<b>/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
3. SAP Network Blog: LOGISTIC COCKPIT DELTA MECHANISM - Episode three: the new update methods
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
<a href="/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods Network Blog: LOGISTIC COCKPIT DELTA MECHANISM - Episode three: the new update methods</a>
Incase you are not able to find them this time also, you can do one thing, put "Roberto Negro" in search at sdn.sap.com, you surely get his weblogs on first page only. Then take all three episodes of LOGISTIC COCKPIT DELTA MECHANISM.
Regards,
Ashish

2LIS_04_P_ARBPL Delta not captured from extraction queue

Similar Messages

Maybe you are looking for