2LIS_04_P_COMP and 2LIS_04_P_MATNR delta issue

Hi experts,
I am having problems with 2LIS_04_P_COMP and 2LIS_04_P_MATNR delta extraction.
I run the init, it is ok. I create an order and then I run DELTA expecting to get more record(s).
DELTA will bring no records. But if I delete set up tables LBWE, initialize them again, and then run the init again, the new records will be available.
Has someone had the same issue? I can't find the reason why the delta extraction does not bring the new records, if I don't re-setup the tables in LBWE.
Thanks in advance for your help,
Best Regards,
André Oliveira

Thanks for your help.
In job control window I do not have the green check button, only the cancel (red cross). When I try to schedule the job it gives me an error "error creating a job", so only I can do is save a start date and periodicity in job parameters. Is this ok?!
I also wrote sap a message because I am trying to enhance it with two fields (they are in LBEW), but same happens... I just see a cancel button, never a green check to validate and accept. I have done all the recomendations. I put the message I wrote below hoping you can give me some insight on this issue:
am trying to do an enhancement to extractor 2LIS_04_P_COMP.
+I go to LBWE and select these 2 fields:
MCAFKO GAMNG Qtd.teór.
MCAFKO GMEIN UM básica
The problem is that in the selection window to select these fields from
pool (scroll down box) to selection criteria (scroll down box) the
button to accept these changes does not appear (I mean the button with
the green check). So it is impossible to add this fields to the
structure. Is there any reason for this not to appear?
I think I have done everything that was needed:
LBWG: delete setup tables for 04 (production application)
RSA7: delete 04 queues
LBWQ: delete 04 queues
LBWF: check for active maintenance logs (does not exist any)+
Some points already assigned.
Best regards,
André Oliveira
Edited by: Andre Oliveira on Feb 23, 2010 12:01 PM

Similar Messages

2lis_11_vascl and 2lis_11_vaitm delta issues

Hi ALL,
I am pulling data from Sales order datasources like 2lis_11_vahdr, 2lis_11_vaitm, 2lis_11_vascl, 2lis_11_vasti and 2lis_11_vasth.
I have some problem with standard extractor of 2lis_11_vascl and 2lis_11_vaitm of not capturing the delta properly. I am currently analysing the issue.
Could any one please clear my below doubts.
1. When ever there is a change to schedule line 2lis_11_vascl to a sales order - does the header and item level also come as a delta?.
2. Secondly i find the delta is correctly captured in Item status datasource 2lis_11_vasti whereas i am missing many documents in item level details datasource 2lis_11_vaitm. Have any one faced this issue. Really finding it difficult to debug the standard extractor.
I could sense that i am missing documents in item level only for a particular item category(Third part order).
It would be great if anyone could explain the above two questions to clear my doubt.
Thanks,
Aravind

Hi Fazal,
Please find the details below
2LIS_11_VASCL : This DataSource provides the BW with data from the Sales area and supplies the InfoSource
                                2AF_SD_SLS_1 with data. Extraction records are generated for the sales order event.
2LIS_11_V_SCL : This DataSource provides the BW with data from the Sales area and supplies the key figure Open Order
                              Quantity in the InfoSource 2AF_SD_SLS_2 with data. Extraction records are generated for the sales order
                               and delivery events.
For More details check the below link :
http://help.sap.com/saphelp_nw70/helpdata/en/ba/0b853c01c89d7ce10000000a11405a/frameset.htm.
Note : To understand more about the open order quatity and sales order details contact SD Cconsultat.Then you will understand about the details.
Regards
Ram.

LBWE - 2LIS_02_SCL and 2LIS_04_P_MATNR activation issue

We use client 010 as configuration client and 030 as development client. When I activate the datasource in LBWE it shows active in client 010 but is not active in 030. Due to this we are not able perform setup and retrieve any records.
Why is the datasource inactive in 030? how can I activate the datasource in 030?
Thanks

hi Kumar
GO to RSA5 and check the datasource..and install the datasource.Once installed check in RSA6 and select the particuler Data Sources and Select the Transport Button.
and Delete the Setup table (LBWG) for Required Data Sources and
goto LBWE try Again for Filling the Setup Table.
hope helpfull

2LIS_04_P_MATNR Delta - Actual Start and Finish Dates

My company is experiencing a problem with retrieving the actual start and finish dates and times from the 2LIS_04_P_MATNR data source with delta extraction. The R/3 source system is version 4.6C. The BI system is version 7.0. Specifically, the data source fields GETRI, GEUZI (finish), GSTRI, GSUZI (start) are sometimes never populated with data. These fields are often blank in the production data extracted. It was observed that the actual delivery date for the order (posting date of goods receipt from process order) was often an earlier date than the GETRI date. This scenario was tried in test systems, and it was found that if the final goods receipt for the process order was posted before the end of the last phase was confirmed, the actual finish date and time fields were not transferred to BI from R/3. In fact, it was noted that a new record was not created in the 2LIS_04_P_MATNR delta queue when the end of the last phase was confirmed. Regarding the actual start data, this is missing if a goods receipt from the process order is posted before the start of the first phase is confirmed.
Has anyone else experienced this problem? How was it resolved?
SAP Notes have been searched regarding this problem, and in fact, a customer message has been opened with SAP for this problem. However, we thought we would try asking the community as well, to see if any other users have experienced this, and how the problem was resolved. We also understand that it may be an unusual practice to post a goods receipt from the process order before the end of the last phase is confirmed. In a more general sense, has anyone else experienced that some of the data source fields are never populated if the R/3 information is entered after the posting of the final goods receipt against the process order? Our testing indicated that no more delta records are created for the 2LIS_04_P_MATNR data source after the final goods receipt was posted.
Thank you,
Chris Sopek

Hello,
we are experiencing your same problem! The only difference to your scenario is that wer are currently operating on SAP ECC 6.0.
Did you receive any answer from SAP?
We opened a request for the same topic.
Thanks

Delta issue on a Generic Datasource

Hi
   I had a Generic Datasource on a Z table.
   The Z table had a Date field on which Delta is based.The Postings are performed manually.
How to solve the delta issue in the below scenario.
Ex; A user made a manual posting with a date 09AUG2010 today and delta is extracted to BW.
    But tommorow a used made another posting with a date 14JULY2010....
Currently that record is not being extracted....how can i resolve this
Thanks

Hi,
Once the data source is created you will extract the data till that date and as the delta is set it will fetch the newly updated records .But i dont think one can post with the back dates in R/3 side.
If i'm not wrong if you are asking regarding record got missed out them wht need to be done?
Then do the repair full request and pull the missed delta records and it wont effect the delta settings.
Regards
KP

GI quantity Delta issue with 2LIS_02_SCL

Hi Friends !
We are facing delta issue in the BI Prod. Hence to look into the issue, performed few steps in Test environment to check whether delta is performing or not. Mentioned below are the steps which are carried :
1. BW Setup
a. Deletion of queues for Purchasing data in ECC
b. Data collection of purchasing documents for March 1 u2013 March 31 in ECC
c. Deletion of source system initialization in BW
d. Loaded collected data into SAP as delta initialization
Result - OK
2. ECC data entry
a. Created PO #5052422, intracompany STO from DDP1 to USC1
i. 1 line item (qty 5) with two schedule lines (qty 2 & 3)
3. First delta run
a. BW brings over 2 schedule lines for PO #5052422
Result - OK
4. ECC data entry
a. Created PO #5052423, intercompany from DDP1 (USC1) to IRP3 (BV11)
i. 1 line item (qty 5) with two schedule lines (qty 2 & 3)
5. Second delta run
a. BW brings over 2 schedule lines for PO #5052423
Result - OK
6. ECC data entry
a. Posted partial delivery for schedule line 1 of PO #5052422 with a quantity of 1
7. Third delta run
a. no records brought over (change to GI quantity should trigger delta)
Result - FAIL
8. ECC data entry
a. Posted partial delivery for remainder of schedule line 1 of PO #5052422 with and a partial delivery for schedule line 2 with a quantity of 1
9. Fourth delta run
a. no records brought over (change to GI quantity should trigger delta)
Result - FAIL
10. ECC data entry
a. Modified delivery date of both schedule lines of PO #5052422
11. Fifth delta run
a. Both schedule lines of PO #5052422 brought over with updated delivery dates and goods issue quantities
Result - OK
12. ECC data entry
a. Modified delivery date of both schedule lines of PO #5052423
13. Fifth delta run
a. Both schedule lines of PO #5052423 brought over with updated delivery dates
Result - OK
Ques :
1) When modified, GI quantity is not triggering delta. Please advise.
2) 2LIS_02_SCL extractor is build on which delta field.
3) How delta works & behaves with 2LIS_02_SCL extractor?
With Regards
Rekha

Good afternoon Rehka,
I believe that it is correct that the GL change you mention will not trigger a delta on the BW side. This functionality appears to be missing.
If you check in LBWE you will see that the EVENTS for 02: Purchasing -> MC02M_0SCL include the following:
MA: Purchase order
MB: Goods receipt
MC: Invoice receipt
MD: Scheduling agreement
The event associated with a Goods Issue is ML and not included in the list of events for this structure. This is the standard behavior.
I checked and I was unable to find a datastructure that does handle event ML. From what I see the only way to do this is through a custom datasource.
Kind Regards,
Des

Delta Issue in Generic data source

HI all ,
    I have a HR generic data source .which extracts only two records ffrom the source for so many days during delta.
   I checked in RSA3 .It shows 16000 records nearly. I did init without data transfer and then delta,still it picks onlys same 2 records .
   Delta setting in RSO2 is Numeric pointer with new status for changed records with field name as"cheque number"
   In BWdatasourceExtraction tab--Deltaprocess is AIE After Image by extractor.Iam not able to choose any other delta process type as it is built from R/3 .I think because of this process type.
anybody faced the same problem .. I tried many ways.. please guide me how to solve. this issue.

HI Prashanth,
                    I checked RSA7 now and I found the problem .In RSA7 the pointer for cheque number is 991749. The delta record created has cheque number 005409 which is lesser than the pointer ,thats why the record is not picking i guess.
       now ,If this is the case ,How can I give delta field.The generic datasource is built on only one table PAYR ,and having cheque number and other fields as keys in the table PAYR.Date is not a key in the table. Please help how to proceed
Thanks
Rgds
Pradeep

Can anyone give me an example of direct, queued and unserialized delta?

hi all,
Can anyone give me an example of direct, queued and unserialized delta for fi and sd applications.
thanxs in advance
regds
hari

hi,
Update Methods,
a.1: (Serialized) V3 Update
b. Direct Delta
c. Queued Delta
d. Un-serialized V3 Update
Note: Before PI Release 2002.1 the only update method available was V3 Update. As of PI 2002.1 three new update methods are available because the V3 update could lead to inconsistencies under certain circumstances. As of PI 2003.1 the old V3 update will not be supported anymore.
a. Update methods: (serialized) V3
Transaction data is collected in the R/3 update tables
Data in the update tables is transferred through a periodic update process to BW Delta queue
Delta loads from BW retrieve the data from this BW Delta queue
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Issues:
Even though it says serialized , Correct sequence of extraction data cannot be guaranteed
V2 Update errors can lead to V3 updates never to be processed
Update methods: direct delta
Each document posting is directly transferred into the BW delta queue
Each document posting with delta extraction leads to exactly one LUW in the respective BW delta queues
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
Extraction is independent of V2 update
Less monitoring overhead of update data or extraction queue
Cons:
Not suitable for environments with high number of document changes
Setup and delta initialization have to be executed successfully before document postings are resumed
V1 is more heavily burdened
Update methods: queued delta
Extraction data is collected for the affected application in an extraction queue
Collective run as usual for transferring data into the BW delta queue
Transaction postings lead to:
1. Records in transaction tables and in extraction queue
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
Extraction is independent of V2 update
Suitable for environments with high number of document changes
Writing to extraction queue is within V1-update: this ensures correct serialization
Downtime is reduced to running the setup
Cons:
V1 is more heavily burdened compared to V3
Administrative overhead of extraction queue
Update methods: Un-serialized V3
Extraction data for written as before into the update tables with a V3 update module
V3 collective run transfers the data to BW Delta queue
In contrast to serialized V3, the data in the updating collective run is without regard to sequence from the update tables
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3.This BW Delta queue is read when a delta load is executed.
Issues:
Only suitable for data target design for which correct sequence of changes is not important e.g. Material Movements
V2 update has to be successful
hope it helps
partha

0CRM_SRV_REQ_INCI_H delta issue (returning 0 records)

Hello experts,
I was wondering is someone faced the issue I'm about to describe? The problem looks like this: standard extractor 0CRM_SRV_REQ_INCI_H doesn't load deltas. It does full loads perfectly though.
I have tried deleting initialization for the source in the InfoPackage, re-initialize, create new service request and run delta once again to see if it will be picked up. This approach didn't help.
Bdocs on CRM side look OK: all Bdocs with type BUS_TRANS_MSG in smw01 are green. Delta queue in RSA7 is green, but it always has 0 records (even when I create new Service Requests or change existing ones). 0CRM_SRV_REQ_INCI_H is active in BWA5 and in BWA7 (although in BWA7 check box Queue exists is not checked).
Best regards,
Vlad

Maybe someone knows if records in tables SMOXRELP_S and SMOXRELP should match perfectly? I see that table SMOXRELP lacks one record that I have in table SMOXRELP_S.

0FI_GL_6 Delta issue

Hi friends!
I'm having some issue with 0FI_GL_6. It was initialized correctly but in sucesive deltas it gets 0 records when it shouldn´t. I've read a note (619454) wich talks about the same problem.
We are on BI7.0 and the source system is a 4.6B, could you tell me if that note is the solution?.
Thanks!!

Hi Sam,
Thanks again for the your quick response.
Let me also brief you more what we did previously.
We were doing following things couple of days back earlier and delta worked.
1.Init with data transfer
2.delta
and delta was running smoothly and picks up data regularly.
After that, we manually changed the ROOSOURCE table for safety interval to 3600 seconds ( if you please know the OSS Note to change the safety interval, pls pass on ).
After the changes to ROOSOURCE table, we tried with the below approach,
1.Full Update
2.Init w/o data transfer
3.delta
This time, delta doesn't bring any data(0 records ) and it doesn't have any timestamp entries in BWOM2_TIMEST.
Can you please tell me , 0 records could me because we did
Full first, Init w/o data transfer after the full update and then delta?
I will assign full points if i resolve this issue.
Regards,
Jeevan

Gmail/Exchange email and calendar syncing issues

I have wiped my email accounts several times and entered in my data in the various ways as shown through the forums but my email accounts do no sync properly whether it is manual or active synced.
I read my emails in my gmail and my Microsoft exchange account and will delete or file them away but then when I check my accounts on my desktop, they are not synced as I've done so on my phone. I've also noticed that my calendars are not synced correctly either.
Could someone help me understand why and how these issues can be fixed? I'm in meetings for most of the day so I rely on my phone to keep me mobile. Was this a bad purchase?!?!

Hi JadeyMU,
How do you have your Microsoft Exchange account configured on your BlackBerry Z10? Are you using ActiveSync, BlackBerry Enterprise Server (BES), IMAP or POP?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

My experience with Apple TV and HDMI/HDCP issues

I am convinced that it is the software update to 4.2.2 from 4.2.1 that is causing this issue. All forms of applications only worked once for me and then it reverted back to HDCP issues. I read several postings everywhere including plenty at Apple's forum and AVS where people were very frustrated with this HDCP issues. Anyways, here is what I did before taking it back to Apple store....I bought AUVIO high speed cables from Radio Shack which is rated very high and tried that and I still got HDCP issues when using NetFlix or AirPlay from iPad. Youtube from Apple TV always worked well without HDCP complaints.
I packed everything back and took it to Apple Store (you can return without re-stocking fee up to 14 days from the day of purchase). After 14 days, you cannot even return it and you can ONLY fix it. I waited for a Technician. They heard my complaints but didn't refute any of it (possibly because they have had numerous complaints on this product). It took 5 minutes inside for them to test and see similar issues with the box that I had. So, they have swapped it for a new box. Before I left the store, I checked the settings including software version and Audio/Video settings in the Apple TV that is connected at the store. I found three main differences none of which the Apple customer service staff agreed could be the reason for my problems (surprise!!)
1. The software update from the shelf and the one they were using was NOT updated to 4.2.2 (it was still running 4.2.1)
2. Because of the software update, the Audio/Video setting for HDMI had the options to toggle between Auto, RGBy, RGBhi & RGBlo bandwidth. I believe this was in place to make the HDMI interface output as component with higher or lower bandwidth but the newer update will ONLY give you the Auto option (!!!)
3. They had this directly Ethernet wired and not through Wireless network and were recieving the all the full bar strength signals. On the box that I returned, eventhough I have 18 Mbps speed at the house (any given time of the day), the Network speed test was taking a long time. Moreover, after the Apple TV network test, it doesn't spit out the outcome of the tests (a BIG bummer and useless for testing).
Anyways, I took the new box and hooked it up directly to my SONY BRAVIA XBR3 TV to one of the HDMI ports, disabled the feature to send or recieve data to Apple directly and did NOT update the software. It worked fine and have tested all of the options. From what I have read so far (I have only spent 30 hours of my weekend on this when Apple product hookups are supposed to take 5 minutes ONLY), there is NO guarantee that it will work continuously as people have had things work on them for 6 months and then suddenly have the HDCP issues.
Will wait to see....if it continues to work....

I figured it out. Had to go to general settings on the main screen and restart. Synch of audio is much better.

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

Interesting and an imporatant issue at sales order schedule line.

hi all,
interesting and an imporatant issue at sales order schedule line.
i created a sales order with 10 qty.and the system proposed a two schedule lines.
let's say to order created date is 27.11.2008.and the requested delivery date is 27.11.2008.
but the stock is not available today then the system proposed two more schedule lines apart from the 27.11.2008.so now there are three schedule lines like below.
schedule line date                      Material availabilyt date   delivery date
27.10.2008 with zero quantity.
28.10.2008 with 5 qty.                28.10.2008                     29.10.2008
02.10.2008 with 5 qty.                02.10.2008                     03.10.2008
now the delivery and pgi already for the schedule line 28.10.2008.
then when i run the availability check on 01.11.2008 system is over writing the material vailability date as today at the scheduleline number two.
now i can able to view only two schedule lines only.
schedule line date                      Material availabilyt date   delivery date
28.10.2008 with 5 qty.                01.11.2008                     29.10.2008
02.10.2008 with 5 qty.                01.11.2008                     02.11.2008
now my concern when we reschedule the avalability check it should notchange the Material availability date of the schedule line which i already delivered.
Regards,
sheshukumar

can any one repsond for this.....

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

2LIS_04_P_COMP and 2LIS_04_P_MATNR delta issue

Similar Messages

Maybe you are looking for