2LIS_04_P_COMP Extractor and BWART field.

I have added BWART field to the 2LIS_04_P_COMP extract structure.I have added BWART field from MCCOMP structure bcoz MCCOMP is already used by the 2LIS_04_P_COMP for other fields.I did this using RSA6 and appended the extract structure.
But when I go to RSA3 and trying to validate the data for this field BWART from the table AUFM.It is not showing for all the orders correctly as it is in AUFM.
Is this the right way what i did or is there any further requirement.
My only question is that the data should be validating/same whether the field is picked from the structure MCCOMP or from the AUFM table.
Thanks,
Please let me know ASAP.

Dear Kumar,
By just enhancing the DS will not solve your purpose, and it won't fetch the data the way you want. The one and only way of getting data into BWART is to
write a code to go into the table AUFM with the key fields available in your DS
and try to find the BWART for the corresponding prod. order / any other doc.
Then only it would get you the right data..
Hope it helps.
Thanks=Points.

Similar Messages

Can u plz help me with the code to add BWART field to the DS:2LIS_04_P_COMP

I want to add BWART field from AUFM table to the DS:2LIS_04_P_COMP.
The AUFM table has key fields as :MBLNR,MJAHR and ZEILE.Can someone plz help with the code to put in the existing function module.I see that both 2LIS_04_P_COMP and AUFM have common field AUFNR process order.
Plz help ASAP.

I want to add BWART field from AUFM table to the DS:2LIS_04_P_COMP.
The AUFM table has key fields as :MBLNR,MJAHR and ZEILE.Can someone plz help with the code to put in the existing function module.I see that both 2LIS_04_P_COMP and AUFM have common field AUFNR process order.
Plz help ASAP.

Extractor to pul fields ...

Hi all,
I am extracting data from MM domian , can u please help me to find out which extractor pulls folling fields from ECC to BW .
Vendor group,Contract number,Number of Material Groups,Product number,Invoice number,Invoice due date,Invoice amount net,Invoice amount gross,Invoice enter date,Invoice pay date,Credit note,Invoice line number,Invoice Line amount net,Invoice Line amount gross,Invoice quan,Payment Terms,Payment method
Thanks

Hi Prafful,
You can get some fields from 2lis_02_itm, 2lis_02_scl and 2lis_02_hdr.
Also, there is a table in ECC where you can find the invoices number assigned to purchase orders, I don't remember the name, ask a FI analyst for the table or the transaction where to see that so you can get the table name.
Hope this helps.
Regards,
Regards,
Diego

Creation of custom Infocubes, extractors and multiprovider

Hi all,
Can somebody give me the information regarding the creation of custom Infocubes, extractors, and multiproviders. It would ne great if you could give me some examples regarding the above in SD.
Thanks,
Sekhar

We will go for the creation of custom infocubes
when the existing business content doesnot suite your requirement.
when u r using the one existing business content extractor and u need the same requirement for another cube u can create your own extractor of the same type without changning the existing one.
we will use multiproviders for reporting purpose. suppose if u are having some 3 infocubes and u want to display the fields from the 3 cubes then go for the creation of multiprovider.

Generic extractor and an append structure

Hi all,
this system is driving me crazy. So, that's something worked in former times..
I created an generic extractor on VEKP. I have not restricted to any selection criteria or hide any field. The system generated the extractor and everything is fine. THEN I created an append on the generic extractor and put different fields inside the append. I want (and this works) to fill this different field via user exit for extraction. All field in the append are having the prefix ZZ, all field are characteristic and there is no inconsistency in the append. I activated the append.
AND NOW - none of the fields of the append is available in RSA6 to hide or none hide or do anything. They are not available. By checking with SE11 on the generated structure - all field including the append are there.
We are on ECC 5.0 with PI 2004.1 for 5.0 SP 10.
Can anyone help. As i told you, this worked in former times (with SAP 4.6C with PI 2004.1 or lower).
Regards
OJ

Hi Siggi,
I have not created an special Append on the VEKP. I created an generic extractor on the VEKP. All fields of VEKP are available and I can hide or choose selection-field for all of these fields. No problem.
i created an append on the extract structure via RSA6 - enhancement. I know that after generating the generic extractor with RSO2 all settings done in former times in RSA6 are lost. But, my problem is: <b>I can not see any of the fields I put into the append. They are not there.</b> Not in ROOSFIELD and following not in RSA6. And that's the problem.
Thanks for your support.
OJ

ABR delta extractor and entries written to the delta queue

Hello Everyone,
We have an ABR extractor and it's behaving like this:
For example fields: PM Order Number, Post Goods Issue Date, Start Date, Work Qty, Projected Qty
Create the PM order the entry is written perfect to the delta queue:
10019987, blank, 04/29/2009, 100 PC, 90 PC
Now, if we perform a confirmation on the PM order we see the following:
10019987, 04/29/2009, blank, 0 PC, 90 PC
Now if we change something on the PM order header we see the following:
10019987, blank, blank, 100 PC, 0 PC
When this comes over to BW we don't get good results in our ODS.
Basically we don't get our Post Goods Issue date and Work Qty gets blanked out. Basically, the last change to the order gets written to the ODS and isn't correct.
Shouldn't it do the following:
10019987, blank, 100 PC, 90 PC
10019987, 04/29/2009, 100 PC, 90 PC
10019987, 04/29/2009, 100 PC, 90 PC
10019987, 04/29/2009, 04/29/2009, 100 PC, 90 PC------this gets sent as last record with all fields updated. We choose all these fields in the extract structure.
Thanks

Hello Martin,
Below is a snapshot of the delta queue (you can see the Cancel). Question: How do you control what record is updated and what others are not? We thought the cancel won't update and the others will in order they were updated to the delta queue (and that appears how it's behaving):
Scenerio #1 (sorry, can't remember sequence of steps done in system, but thought I'd mention)
Cancel, Order Number, Release Date, Posting Date, Material, Plan Qty, Confirmed Qty
blank, 10019987, 04/29/2009, blank,       , 4415, 100, 0
blank, 10019987, 04/29/2009, 04/30/2009, 4415, 0,    100
blank, 10019987, 04/29/2009, blank,         4415, 100, 100
X,       10019987, 04/29/2009, blank,         4415, 100, 100
Scenerio #2
cancel, order, release date, posting date, material, plan qty, confirm qty
blank, 100019989, 04/29/2009, blank, 4415, 50, 0
then we perform a confirmation for 50 pieces and this is how the delta queue looks like
cancel, order, release date, posting date, material, plan qty, confirm qty
blank, 100019989, 04/29/2009, blank, 4415, 50, 0
blank, 100019989, 04/29/2009, 04/30/2009, 4415, 0, 50 <----
second line
Notice the second line now has plan qty at 0 and confirm at 50. Plan should always show 50 (or whatever the plan amount is. Something doesn't seem correct here??
Now, if we change something on the order header, we get the correct plan qty of 50 (and confirmed still 50), but then the posting date is blank. So when this comes over to BW we get correct plan and confirmed qty, but posting date is blank. This really makes no sense because if you have confirmed qty populated with a quantity then you have a posting date.
Thanks!

Delta Enabled Business Content Extractors and Safety Intervals

Is there a transaction/table from where I can check the safety intervals of Business Content extractors for example 2LIS_13_VDITM. If I created a Z copy of an extractor is there a way of changing this value? Thanks

There are two fundamentally different extractor types:
1. Que, which is updated at time of transaction
2. Delta based on incremental field on transaction
LIS extractors are type 1 and CO extractors and generic data sources are type 2.
Type 1 is more advanced as it handles the change directly. Type 1 handles complex data scenarios where type 2 is better for simple scenarios. Learn more i BW350

Extractor: hide Vs field only selection

Hello BW experts,
in datasource properties field in the R/3; what is the difference between the fields 'hide' vs 'field only'.
suggestions appreciated.
Thanks,
BWer

Hi,
Hide field
You should set this indicator to exclude an extract structure field from the data transfer. As a result of your action, the field is no longer made available in BW when setting the transfer rules and generating the transfer structure.
if u dont want to see this this ..u set this field u cant see in the BW which is available in extrac structure
Field only known in exit
You can enhance data by extending the extract structure for a DataSource using fields in append structures.
The indicator Field only known in Exit is set for fields of an append structure. In other words, by default these fields are not passed onto the extractor from the field list and selection table.
Deselect the indicator Field Only Known in Exit to enable the Service API to pass on the append structure field to the extractor together with the fields of the delivered extract structures in the field list as well as in the selection table.
and also see this thread...
https://www.sdn.sap.com/irj/sdn/profile?userid=2515725
Assign Points if useful
-Shreya

DSO - What key fields and data fields in dso

Hi experts,
I need to create a dso in between the cube and 2 data sources(2lis_11_vaitm, 2lis_12_vcscl) to stage the data. My question is: what key fields and data fields to choose for the dso? is there a standard dso to copy? please explain in detail the model to set up, whether to connect both the ds's to dso and then to cube or one ds to dso and the other to the cube. more details will help.

Check this for standard DSO:
http://help.sap.com/saphelp_nw04/helpdata/en/43/fcdc387f34384f94c3227baf3837a8/content.htm
Thanks...
Shambhu

Infoset Join condition on Key feilds and data fields

Hi Guys,
I have a requirement to biuld the Info set with join conditon on two DSO's the info objects which i am using in the JOin condition are defined as data fieds in one DSO and defined as key fields in another DSO, is it possible to define join condition on key fields and data fields.
The two info objects are
                       0AC_DOC_NO
                       0ITEM_NUM
These two info objects are defined as data fields in DSO :   0LIV_DS1   Invocie verificaion
                                                        key fields in DSO:    0FIAP_0o3 FI AP Line Item
Please suggest me is it possible to define join the condtion on the data fields and key feilds.
Thanks
Best regards
SG

Hi
yes you can create join, you will get any issue in reporting level.
example: Say i want to create Info Set on 0MATERIAL and Sales DSO.
In 0MATERIAL Info Object it is key filed, but in my DSO 0MATERIAL is data field.Still we can create
Creation of join is dependent on fields common in your source objects.
check out the below document
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7?QuickLink=index&overridelayout=true
Regards,
Venkatesh
Edited by: Venkateswarlu Nandimandalam on Sep 27, 2011 2:26 AM

Key fields and data fields in a DSO ??

i have a question regarding key fields and data fields in a Standard DSO...
i am using 2 datasources to build a open sales report 2LIS_11_VASTH and 2LIS_11_VASTI i am pulling in data from these 2 data sources to a DSO and i am wondering what infoobjects should be in the key fields and data fields .....does this reflect back to table VBUK and VBUP tables and does the key field in the DSO have to be the key fields in VBUK and VBUP tables ???? or what really should be included as key fields and data fields ????
please help....

If you look at the various SD tables, VBELN and POSNR are commonly used as the document number and document line item.
For VBAP and VBUP, it's referring to the Sales Order Line Item with the columns VBELN and POSNR as the key for both tables. However, if you look at the LIPS table, which is the Delivery Line Item table, it too has VBELN and POSNR as the key. Likewise, the VTTP table, which is the Shipment Line Item table, also has VBELN and POSNR as the key.
While using RSOSFIELDMAP as a map is a fairly good "rule of thumb", it still needs to be used with a level of skepticism.

Prerequsites for deciding Key fields and data fields

Hi
I would like to know the criteria to decide upon KEY fields and Data fields for an infoprovider.

Hi,
What is a Key field in a Database and How should I choose one?
Keys are crucial to a table structure for many reasons, some of which are identified below:
They ensure that each record in a table is precisely identified.
They help establish and enforce various types of integrity.
They serve to establish table relationships.
Datafields may be Charecteristics and it may be keyfigures
Regards,
Marasa.

Key Fields and Data Fields in ODS

Hi Guru's ,
Can u Explain what are Key Field's and Data Field's in ODS,and How they work.
Thanx in Advance.

Hi Pradeep,
An ODS key fields forms a unique combination of chars according to which data in the ODS will be summed up. Data fields are additional fields, chars or key figures.
For example, you have the following key fields:
Doc No, Doc line item (item no in the doc) and you load the following data:
Doc# Item# Amount CALDAY
1234 1        100       26.09.2005
1234 1        150       27.09.2005
1234   2        300      27.09.2005
1235   1        400      27.09.2005
The first two rows with the same key fields (1234-1) will be aggregated and into ODS will go amount of 250.
What I said is true if for Amount key figure the Add option is set.
But if you set an Overwrite option, then the second record will overwrite the first one and only amount of 150 will go to ODS!
But if CALDAY is also a key field, then into ODS will go all records without any aggregation, because key fields combination is different for all records.
So, ODS key fields choice and KFs settings are very important for data aggregation in the ODS.
Best regards,
Eugene

Data fields and key fields

Hi,
Data fields and key fields are same as Characteristcs and key figures? Or they are diffrerent?
Thanks,
Radha

HI
Key Fields = Acts as Primary Key for The ODS like Primary of Tables in R3.
Data fields = Apart from Key fields We consider rest as data fields.
Ususally we use Characteristic info Objects and Dates in Key Fields and Key figures in Data fields.
It's decisive factor for overwriting property of ODS or DOS.
Hope this helps.
Regards,
Rangzz
Edited by: Ranganath Kodiugane on Feb 7, 2009 12:14 PM

Chart report Condition fields and Data fields

Hi all,
i have tried chart report by adding two condion fields and one data field, the report is more meaning full in this scenario. the first condition field is taken as x-axis, the 2nd condition fields is taken as legend.
while adding more condition fields and data fields, i feel its not showing meaningfull data.
can anyone explain how the condition fields and data fileds are manipulated by crystal report.
i am using CR XI R2 Server.
Thanks
Padmanaban V

i am using Crystal Report XI R2 RAS Embedded in my server.
as we can add any number condition fields programatically using the method
ConditionField.Add(FieldObj), i would like to know how these fields are manipulated internally by the RAS server.
that means, what is the significance of condition fieldobject 1, condition fieldobject 2,condition fieldobject 3 etc...
if i add more than two condition fields , RAS Chart Report always returns 0 as legend value for all legends.
Thanks in advance
Regards,
Padmanaban V
Edited by: Padmanaban Viswanathan on Dec 22, 2008 9:53 AM

2LIS_04_P_COMP Extractor and BWART field.

Similar Messages

Maybe you are looking for