2LIS_08TRFKZ

Hi,
Can anybody give the BI content link for Shipment 2LIS_08TRFKZ and 2LIS_08TRTK.
Thanks.

2LIS_08TRFKZ
http://help.sap.com/saphelp_bw33/helpdata/en/74/33793f092f11d4b2e10050045571f7/frameset.htm
2LIS_08TRTK
http://help.sap.com/saphelp_bw33/helpdata/en/5e/16b41e56e8874186642683253f1583/frameset.htm

Similar Messages

  • 2LIS_08TRFKZ datasource

    Hello gurus,
    I have a small question about 2LIS_08TRFKZ datasource.
    As we observed, it calculates NETWR, by GROSS WEIGHTs of the materials. But, we need to calculate by NET WEIGHT.
    I want to know, if there is an easy way for customizing the datasource in R3 (CMOD-Spro).
    Or we'll recalculate it in BW with ABAP code during transformation.
    Thanks.

    Hi,
    If you know the business logic and if you think that it can be calculated at transformation level then I would suggest you to do the calculations in transformation routine only.
    Because for standard datasource enhancement you will have to do lot of steps e.g. append structure then write the logic, replicate DS and so on...
    Regards,
    Durgesh.

  • Problem with 2LIS_08TRFKZ

    Hi
    The problem is with extract checker RSA3 for the data source 2LIS_08TRFKZ
    In RSA3 I am not getting the 'shipment route' information
    for the 'Means of transport JTC0'. For the other 'Means of transport' i am able to see the  'shipment route'.  I found that the 'shipment route' to be present for 'Means of transport JTC0' in LIKP Table.
    Even after filling Setup tables also it is showing the same problem

    Hi
    Try to do a full load and do the debug in RSa3 mode and see if they are missing there also for the shipment route.This looks like an Update issue.
    Thanks
    Bharath

  • What is the transaction to fill Setup tables for 2LIS_08TRFKZ

    Hello Friends,
    I am using OLI8BW setup table transaction for 2LIS_08TRFKZ extractor. Is this transaction correct?  Its not just working.
    Thanks
    Simmi

    why don't you go through the menu if you're not sure about the transaction code?
    SBIW > Settings for Application-Specific DataSources > Logistics > Managing Extract Structures > Initialization > Filling in the Setup Table > Application-Specific Setup of Statistical Data > LES - Shipment Costs - Carry Out Restructure
    then launch it and follow menu
    System > Status
    it will tell you the transaction code (= VIFBW)

  • Steps for setup tables for 2lis_08trfkz?clarification?

    Hi guru's
    we want to enhance the extrator 2LIS_08TRFKZ.
    I just want to know which transaction we use to fill setup table for this extractor.
    Do we use OLI8BW or something else
    A quick response wil be highly appericiated.
    Regards,
    Amandeep

    Hi Srikanth,
    Thank you for a quick response.
    Yes i have deleted the setup tables before filling them
    the job status say it is finished
    the only bit i am worried is the log which says the setup is for application 12 although we are running it for 2lis_08trfkz and which is under application 8(shipment).
    Please clarify if this is the it is suppose to work.
    Once again thank you very much for your help and time.
    Regards,
    Amandeep.
    Start date        14.10.2006   Name of run      TRFKZ      
    Start time        19:49:49     User name        SINGAM     
    Date of terminatio00.00.0000   Application      12         
    Time of terminatio00:00:00     Source table     LIKP       
    Finish date       15.10.2006   New run                     
    Finish time       03:53:37     Document from    0000000000 
    Duration (min)    483.8        Document to      ZZZZZZZZZZ 
    No. of docs       1,707,237    Version          &(         
                                   Variant

  • 2LIS_08TRFKZ NETWR splited by weight of delivery positions

    Hello experts,
    In 2LIS_08TRFKZ extractor, the cost is split proportionately according to weight of all the positions of the delivery.
    Is it possible to split only by the weight of the position of Finished Product or Main product of the delivery?, To do that, is it necessary to use an user exit, or is it possible to parameterize the extractor specifically? How?
    In the case of user exit, where? In the CMOD at the time of extraction? Or through function module MCEX_BW_LO_API?
    Thanks in advanced.

    Hi
    Cost spiliting is standard functionality of extractor you cannot modify it however, you can write the CMOD code the logic you said.
    Onemore thing, to populate the data create a zfield and update it.
    Regards
    YuvaraajP

  • 2LIS_08TRFKZ - Tariff zone of point of destination

    Hallo together,
    does somebody mayby solved the following problem:
    we use datasource 2LIS_08TRFKZ. We have some reports who use the field:
    TarifZone at PoDest. We found this field in the SAP R/3 table
    VFKP. But the problem ist sometimes it is not field in this table. In this case it is also emty in BW.
    CAN someone help?
    Thanks Santra

    Hallo Siggi,
    thank you for your answer. We are not looking for a dummy value. The user just want te field to be filled all the time.
    From the point of the source system:
    The field: TfZone dest is field, but than when someone makes manual changes in the freght cost (Frachtkostensatz) it is empty and the field VFSI-MPROK shows: " A manual price change carried out". So i think ther should be a solution to fill it all the time.
    Thanks Santra

  • Delivery Item in 2LIS_08TRFKZ datasource

    Hi,
        I want to use the 2LIS_08TRFKZ extractor to load the shipment costs and Qty by Delivery number to BI. I see that I can enhance the extractor to bring the Delivery Number from the VTTP table. But I am wondering how I can get the Delivery Item information and split the Costs and Qty at the Item level.
    Please provide some input.
    Thanks.

    Hi,
       I had the same design idea. This is what I have in my mind, let me know if it works...
       We have a Deliveries DSO DEL_DSO (loading from VCITM) with the Delivery Number and delivery Item as the key, the shipment number and delivery Qty are in the data fields. I thought of creating a FKZ_DSO with Shipment number, the Delivery number, and delivery item as the key and the costs in the data part and load it with the 2LIS_08TRFKZ datasource.
        Then load the costs from the FKZ_DSO to an intermediate DSO while looking up the Qty from the DEL_DSO. So the Costs and the Qty would line up at the Shipment, delivery and item level.
    But this would only work if I can get the Delivery number and Item from the FKZ data source. I am in a fix now cos the REBEL and the REPOS does not give me that information. I would have to enhane the extractor and write code to get the delivery number and the item from the VFSI table and also will have to split the shipment cost accross the all the deliveries. It seems a lot of redundency to me, so trying to avoid it.
    Can you please double check tho REBEL and the REPOS fields?
    Thanks.

  • Is there any solution to Delete Single Record in Delta Queue 2LIS_08TRFKZ

    Hi,
    Is there any solution to Delete the Single Record in Delta Queue at R/3 -(RSA7) for Datasoure 2LIS_08TRFKZ
    A wrong posting has been posted at R/3, its has been deleted once they came to know its wrong at R/3.
    Now the  Problem is  wrong data has come into Delta Queue RSA7.
    We are unable to extract the data in BW. Its not even coming till PSA also  so that we can delete at PSA itself that particular record.
    Is there any solution to delete the Single Record in Delta Queue at R/3 -RSA
    Thanks & Regards
    Ashfaq

    >
    Ashfaq Shaik wrote:
    >
    > Record 166 :Contents <000000000.00000000 from field ZZVOLUME cannot be converted in type DEC     RSAR     197
    Sorry I didnot see this error before.
    I guess you didnot try error handling hence you get this error BW side.Try error handling first.
    If this doesn't work then you can go with above method.

  • Extraction shipment cost 2lis_08trfkz

    Hi,
    I have a problem with shipment cost. A shipment cost is assigned to a transport.
    Datas are updated to BI system. When I delete a shipment cost in order to create an other one and assign it to the same transport, BI system detects changes, but it create 2 register with the same transport number but different shipment cost. I need a DSO to store data, but the KEY FIELD must be transport numer, shipment cost and shipment cost item. Then tha data are update into a cube.
    Is there into SAP R/3 a field when I can store deleted shipment costs? The used table is VFKP, but there is no place where I can store deleted shipment cost. Do you know how I can solve this problem?
    Thank you very much

    Hi pcamp :
       The solution for you is to add to your DSO the Reversal Indicator (InfoObject 0STORNO), this way you can identify the deleted Shipments/Shipment Cost documents when the 0STORNO = 'R'. If the 0STORNO = '' then the document exists in the ERP.
    You could either make 0STORNO part of the Data Fields or Key Fields of you DSO, depending on your particular needs (overwrite or preserve existing records).
    Hi Ramesh:
       As you mentioned before, the SAP Note 440166 explains that there is ODS Capability for Shipment and Shipment Costs DataSources.
    Depending on the Support Package of your SAP System you may need to apply the corrections, according to the follwoing SAP Note: 440416 - BW OLTP: Correction report for change of delta process.
    Regards.

  • NETWR in extractor 2lis_08trfkz

    Hi,
    I'm using extractor 2lis_08trtfkz for shipment costs. Sometimes a shipment cost item is cancelled and deleted. At this moment three records are send to the deltaqueue:
    For example:
    X 35,00- (the deletion)
    35,00 (the original record)
    R 35,00- (the cancellation)
    Problem is that the acquisition layer in BW now contains netvalue -35,00 instead of 0,00 as I want it to be. Does anybody know what to do?
    Katrin

    Hi,
    If you are loading to a ODS then you don't to worry about this. Generally key figures are set to overwritten mode in transformation or in update rule.
    So let's say you just fetch this field from database without checking delta mode. The highlighted number is NETWR:
    X     35,00- (the deletion) 100
    35,00 (the original record) 100
    R     35,00- (the cancellation) 100
    When it comes to your ODS then NETWR is still 100 - that's what overwrite mode means.
    If you are updating to a Cube then you can follow Kams's suggestion. But you really need an ODS in data acquisition layer.
    Regards,
    Frank

  • 2LIS_08TRFKZ and 2LIS_08TRTLP Delta Problems

    Hello Experts,
    We have been having problems with delta not getting captured correctly into BI with the above extractors.
    Just as an example, when a shipment cost document is deleted in R/3, the corresponding record in the DSO is not deleted but the fields are initialized, leaving just the key.  By the way, we are loading to custom DSO's keyed on Delivery Document and Item.
    In our R/3 system, users can use LSMW in order to cancel/reverse shiipment cost documents in batch mode.  
    Is it possible that this is causing the problem? 
    Thank you for your input.

    Hi Celine:
    Please check if this SAP Note 496616 is applicable to your system and compare the definition of the Key Fields on your DSOs with the recommended Key Fields on SAP Note 440166.
    Note 496616 - "Deleting data records in the ODS".
    Note 440166 - "ODS capability for shipment and shipment costs DataSources".
    In case those notes don't provide the solution to your issue, please check if your scenario is described on SAP Note 1133282.
    Note 1133282 - "Initialized fields in the data part of a DataStore object".
    Regards,
    Francisco Milán.

  • 2lis_08trfkz -vstel        ShpPtDeparture

    Hi,
    Field VSTEL is coming up with no results to BW system. Also, when extract from RSA3 in R3, no value is shown up.
    can you advise?
    thanks
    sp

    well, field is not filling because, table vtts is not ajjusted in my system.
    so, i got it from table vttp by using user exit.

  • Table fields 2LIS extractors

    Hi all,
    In the extractor pool of the 2lis_08TRFKZ and 2lis_08TRTLP we have a field "CMFRE" that comes from strucutre VTRLK.
    Does anyone know in which table this field is stored?
    How can I check this?
    Regards,
    Dwain

    Hi Dwain,
    In your case, if you look closely you can find the table name in the structure itself.
    In the structure VTRLK, there is a include of table LIKP. And this field exists in this include structure. So it is clear that this field is stored and extracted from table LIKP.
    Thanks
    Amit

  • Extractor for FLEET table

    I need to extract some fields from the table FLEET, does any of you know if there's already a standard extractor for that?
    Otherwise I may need to enhance an existing one or create my own. If so, can you suggest any ideas about how to link the data?
    If I have to enhance, I was thinking about using 2LIS_08TRFKZ and add the missing fields there. Is this the right approach?

    HI,
    Enter this table name in SE11 ->Display->Where-Used-List->Select Stuctures, Includes, Programs etc...
    Get into ROOSOURCE table, Select A in OBJVERS, Extraction details etc..You will come to know about any Standard Extractor.
    I have no idea about your second question.
    Regards,
    Suman

Maybe you are looking for