2lis_11_vahdr and extraction in PSA

Hi experts,
I'm finding some problems in a delta extraction with 2lis_11_vahdr datasource ito PSA in BW 7.0
The delta extracted the same orders many times, although their fields never change.
There are many records deleting (with the ROCANCEL field set to 'X') and writing the same order with the same values.
Ex.
DP  PART RECORD ROCANC VBELN                       BESTK    SPSTG      TRSTA      UVALL     UVALS
1    1     9.246     X     2008422760     B          A     C     C
1    1     9.247          2008422760     B     C     A     C     C
1    1     9.248     X     2008422760     B     C     A     C     C
1    1     9.249          2008422760     B     C     A     C     C
1    1     9.252     X     2008422760     B     C     A     C     C
1    1     9.253          2008422760     B     C     A     C     C
1    1     9.254     X     2008422760     B     C     A     C     C
1    1     9.255          2008422760     B     C     A     C     C
1    1     9.256     X     2008422760     B     C     A     C     C
1    1     9.257          2008422760     B     C     A     C     C
1    1     9.258     X     2008422760     B     C     A     C     C
1    1     9.259          2008422760     B     C     A     C     C
1    1     9.260     X     2008422760     B     C     A     C     C
1    1     9.261          2008422760     B     C     A     C     C
1    1     9.262     X     2008422760     B     C     A     C     C
1    1     9.263          2008422760     B     C     A     C     C
1    1     9.264     X     2008422760     B     C     A     C     C
1    1     9.265          2008422760     B     C     A     C     C
The problem is that the PSA table contains may unuseful records, wasting disk space.
Any suggestions ?
thanks in advance,
Mirco

Praveen,
thanks for your answer, I'm looking in table CDHDR.
My next question is: admitting that a modification has been done on that order, is it normal that the datasource extracts it also if none of its fields have been modified ? 
thanks,
Mirco

Similar Messages

  • 2LIS_11_VAHDR not extract the latest sales

    Hi gurus.
    I need to make one query with the sales dates. For this, I use 2LIS_11_VAHDR and 2LIS_11_VAITM data sources. The problem is that the sources extract the date between 2003-2005. I need also the sales dates between 2005-2009. I don't haw to make to extract all dates. (when I run the extraction process I give the complete act.)
    tank you

    Hi
    1) Deleting setup table : tcode :LBWG  then give application component 11 (SD SALES BW)
    But this would result in deletion of the data in setup table for all the data sources of 11 component.
    2)Filling up the setup table for SD SALES  Tcode : OLI7BW
    Specify the data selection criteria, here u can give the sales documents ranges for ur required period
    then
    Give the Name the Run and give a future termination date for job Run and execute in the Background
    3) Monitor the job then check the data in RSA3.
    Hope this help..
    Sonal...

  • Donot extract from PSA. Access datasource directly (for small amts of data)

    Hi Experts,
    I am facing issue in DTP screen. I dont see File extraction selection path in DTP screen.
    My requirement is to load the csv file directly into DSO.  Here I dont use PSA /Infopackage.  I want to do this by DTP selection.  But in DTP selection I dont see File extraction options.
    In DTP screen I dont see Check Box which says " Donot extract from PSA. Access datasource directly (for small amts of data) "
    Last week we have upgrade/applied support packs.  So I am assuming that is this issue occured due to upgrade activity or it is something other way which iam missing.
    Appreciate your early response.
    Many thanks for your help.
    Regards,
    Saji

    Saji
    What is the location of your CSV file? Your Local machine or Application server ?
    I believe it has to be application server to have this settings.
    If you think this problem got created due to upgrade , you can try to create a FULL DTP for any of the master data/text DataSource and check if the option is coming there. If yes, then upgrade did not create any problem and you are sure this is a settings problem.
    Please check this thread....Do not Extract from PSA but Access Data Source (for Small Amounts of Data)
    Regards
    Anindya
    Edited by: Anindya Bose on Mar 10, 2012 10:23 AM
    Edited by: Anindya Bose on Mar 10, 2012 10:38 AM
    Edited by: Anindya Bose on Mar 10, 2012 10:38 AM

  • Using RSCRM_BAPI to convert data from Query and load into PSA to DSO

    Hi Experts,
    I have a complex query which is being executed in BeX.
    I need to go in the reverse direction and extract the data from the Query and load into the PSA and then to a DSO.
    I am using RSCRM_BAPI for this purpose and have got data into the extract table successfully.
    But , my query has some variable screen wherein we need to give some inputs for selection.
    I have create those Infoobjects and put them in the DSO.
    How do I capture these inputs of  the selection screen for storing in fields of my DSO as the Extract table does not store these inputs  ???

    write the whole insert query desired by you with the help of excel formulas.they are very easy or google 'how to use excel formulas".
    then copy the fromula to whole set of data in excel fields.
    run the insert query in excel as batch.
    i hope this helps.

  • I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full" i dont know what to do. Its been 2 days now.

    I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycle been will help you restore." how am i going to erase files if i can't open my ipad. i dont know what to do. Its been 2 days now. please help. thanks.

    yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.

  • How can I read the bootstrap files and extract the fragment-URLs and fragment-numbers in plain text?

    How can I read the bootstrap files of any HDS Live stream and extract the fragment-URLs and fragment-numbers in plain text?
    Could it be that it is some kind of compressed format in the bootstrap? Can I uncompress it wirh  f4fpackager.exe? Could not find any download for f4fpackager.exe. I would prefere less code to do so. Is there something in Java of JavaScript, that can extract the fragment-numbers?
    Thank you!

    Doesn't sound too hard to me. Your class User (the convention says to capitalize class names) will have an ArrayList or Vector in it to represent the queue, and a method to store a Packet object into the List. An array or ArrayList or Vector will hold the 10 user objects. You will find the right user object from packet.user_id and call the method.
    Please try to write some code yourself. You won't learn anything from having someone else write it for you. Look at sample code using ArrayList and Vector, there's plenty out there. Post in the forum again if your code turns out not to behave.

  • Front end Backend Modeling Configuration Reporting and Extraction.

    Hi..All
    Can Any one plz explain the terms "Front end","Back end" related to Modeling,Configuration,Reporting and Extraction.
    Thanks & Regards
    Jonn
    <u>[email protected]</u>

    Hi,
    Frontend is the reporting aspect, i.e Workbooks, queries, Web reporting, Crystal reports, etc.
    Its called the frontend as that's what the users see and they don't see what goes on in the 'backend' i.e Config and Extraction, data manipulations, etc.
    Modeling is used to design the cube, ODS, etc. Also modeling concepts can be used to design frontend queries as well.
    Cheers,
    Kedar

  • How to browse a file and extract its contents

    i want to browse a file and extract its contents.My code is given below but its not working .Can anybody help me please
    JFileChooser fc = new JFileChooser();
              int returnVal = fc.showOpenDialog(jfrm);
              if (returnVal == JFileChooser.APPROVE_OPTION)
              File file = fc.getSelectedFile();
              //This is where a real application would open the file.
              fileName=file.getName();
              //This is a file function to extract data from a file.
              //It reads data from a file that can be viewed on cmd
              jlab3.setText(fileName);
              try
    // Open the file that is the first
    // command line parameter
    FileInputStream fstream = new FileInputStream(fileName);
    // Convert our input stream to a
    // DataInputStream
              DataInputStream in =new DataInputStream(fstream);
    // Continue to read lines while
    // there are still some left to read
    // while (in.available() !=0)
    // Print file line to screen
              fileName1=in.readLine();
              jlab3.setText(fileName1);
              in.close();
    catch (Exception e)
              System.err.println("File input error");
              }

    JFileChooser fc = new JFileChooser();
    int returnVal = fc.showOpenDialog(jfrm);
    if (returnVal == JFileChooser.APPROVE_OPTION)
    File file = fc.getSelectedFile();
    //This is where a real application would open the file.
    fileName=file.getName();
    //This is a file function to extract data from a file.
    //It reads data from a file that can be viewed on cmd
    jlab3.setText(fileName);
    try
    // Open the file that is the first
    // command line parameter
    FileInputStream fstream = new FileInputStream(fileName);
    // Convert our input stream to a
    // DataInputStream
    DataInputStream in =new DataInputStream(fstream);
    // Continue to read lines while
    // there are still some left to read
    // while (in.available() !=0)
    // Print file line to screenHere you are reading the first line of the file
      fileName1=in.readLine();
    //}and here you are displaying the line in a (I suppose) JLabel. A JLabel is not very suitable for displaying a file content, except is the file contain few characters !!!
    jlab3.setText(fileName1);
    in.close();
    catch (Exception e)
    System.err.println("File input error");
    }If you want to read the complete file content you must uncomment lines inside while instruction, like this
    while (in.available() > 0) {  // I prefer to test in.available like this, instead of !=
      // append text to a StringBuffer (variable named sb here) or directly in a textarea.
      sb.append(in.readLine());
    ...

  • Unable to select and extract object...

    I am currently attempting to edit a recently converted raster to vector image. I have the file opened and selected after having used the "live trace" function to revise it and save as a vector image. Now I would like to select and extract a portion of the image to work with but I am neither able to select and extract the object of focus from within the general picture. When I attempt to use the pointer selection tool to select the object of focus, the entire image becomes selected with a blue border. If I try to use the magic wand nothing happens. If I try to use the lasso tool I can draw around the object of focus but when I close the lasso it simply disappears leaving nothing selected. I've even tried to "ungroup" the image but option is grayed out (unavailable). Any insights into what I am doing incorrectly? By the way, the live trace function becomes active whenever I click anywhere within the general image.

    RUConscious,
    Expanding the Live Trace should make it accessible and editable just like any other vector artwork where you may Direct Select individual/multiple Anchor Points, Select paths, etc.
    Maybe a closeup of the issue area, with a hint at what exactly you wish to do, would help the helpers, preferably including the relevant part of the Layers panel (which may be moved).
    Apart from that, others may tell you that I am too old, or silly, to apply Live Trace.

  • File Read and Extract

    Hi,
    I have a script which runs and generates log files. Rather than manually read through these log files, I'd like to code a program which will take the file, read through it and extract the data I wish to extract.
    For example, it may read:
    bla bla bla
    bla bla bla
    23/03/05 - 151105 Files
    bla bla bla
    23/03/05 - Elapsed Time: 3m 50s
    bla bla bla
    24/03/05 - 51250981502 files
    bla bla
    24/03/05 - Elapsed Time: 59m 12s
    bla bla
    etc etc.
    So I want to ignore the "bla bla bla", pick out my keywords, such as file, time and print out the number next to it, preferably to a nice little html file or something :)
    I am able to read files and I think I can pick out keywords using string tokenizers, although this is more advanced than tokenizers I've used before. I used a buffer to split the file and read it line by line.
    I'm pretty stumped, although this seemed like a straight forward thing to do at the time....
    Any advice to get me going?
    Thanks!

    you could use a reg ex to match on xx/xx/xx and still read line by line.
    or you could use Integer.parseInt and always parse the first two characters of a line, if they parse they are integers, but maybe blah has integers in the first two positions as well.

  • DataSources and extract structures generation

    Hi,
    How would I generate the DataSources and extract structures using transaction LBWE? It seems that there are no push buttons to say to generate the DataSources and extract structures from LBWE? Would clicking on the DataSources and extract structures and click on the continue button be enough?
    Thanks

    I check from LBWE maintenance structure column, and the fields are there on the left hand side for the selection criteria.
    How would I check "..<i>fields you have enhaced are ready to use</i>...." from LBWE.
    From RSA6, I would doubleclick on the LIS datasource, and I see no enhanced fields and therefore could not see if they are hidden.
    "<i>Did you check in LBWE if your strcutures have the fields ready to use?" </i>How would I do this? Maybe this is the problem.
    Thanks
    Message was edited by:
            NoNoNo ...

  • Data source and Extract Structure

    Hi all,
    I have a doubt on Data source and Extract Str,
    when i used one info cube with some char and kf's
    after i did extraction shall we change the extract strcuture prequently other wise better to use all the predefined extract strcuture hide in data source.
    if i hide in datasource after extraction i want to use some of hide fields, so we can use it? if we can use how can we extract data for that specified hide fields to bw side.

    If you wont to create the genaric data source at that time
    you can create cube with some char and kf.
    after extraction you wont to modify the structure ? if you mofify
    the structure then replicate the data source and delete the data
    and upload the data from r/3 to bw.its not correct way every time modifying the
    structure.if you put hide means that fields are not coming to
    bw side.if put modify the hide field ,first goto rsa6 edit data source
    remove the hide check box and save after come to bw replicate the data source
    delete the data and load the data (if you wont full data for hide field)
    if you dont load full load means only available upto data only what ever field you modify the
    hide to unhide,

  • Load Metadata and Extract Metadata tasks in EPMA hfm app not appearning

    Hello,
    I have deployemed a hfm app in EPMA.
    But the options of Load Metadata and Extract metadata does not appear under Load task and Extract task.
    Version of EPMA is 9.3.1.3.
    Is this some limitation with this version of EPMA or have I done something wrong during the installation.
    The user has all the privileges for this app.
    Please help.
    Thanks and Regards
    Hemanth

    Sorry,
    Posted in a wrong forum.
    Thanks
    Hemanth

  • Problems with 2LIS_11_VAHDR and 2LIS_11_VAITM IS and DS

    Hi everybody,
    I'm working on a project under BW 7.0 release. Actually,I'm facing a problem between standard 2LIS_11_VAHDR and 2LIS_11_VAITM (IS and DS). I activated both of them from BC  (IS and DS), but the IS is under 3.5 release and DS under 7.0 release. The problem is how I can take either IS from 3.5 to 7.0 or DS from 7.0 to 3.5 in order to have both objects in the same release, so that I can create a transter rule between them.
    I really appreciate help any help you can give me.
    Thanks in advance
    KG

    Hi Kenya,
    Try T code se16 in BI..give table name RSOSFIELDMAP..next give OLTP source as 2LIS_11_VAHDR( Ur data source) in IOBJNM filed give ur respective target field name. This will give u the corresponding source field name....hope this helps
    Thanks
    Prashant

  • I created in iMovie, and extracted audio from one of the clips to use in the title sequence.  All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

    I created in iMovie, and extracted audio from one of the clips to use in the title sequence.  All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

    I am on a MacBook Pro with OS 10.6.7 running iMovie '11 and iDVD 7.1.1.  Thanks for any input.

Maybe you are looking for