2LIS_11_VAHDR_INIT Extraction for SD_C03

Hi,
I am doing an initialize with delta, in the monitor everything's ok. (I get green signal)
& in the cube -> manage I get the reporting icon, but when I try to check the data availability in the cube I get a blank screen. In reporting also I am unable to display data.
Thanks in advance,
Surya.

Surya,
first, the case with only 44 records were added might be becos of some tranformations(routines) you have in your update rules. Try to debug them and you will find a reason.
second, the reason why you were not able to see ay records in IC or in LISTCUBE might be becos of the settings.
go to manage and select the fld for selection and now go to setting and check all the columns you want to see. You will be able to see now
assign points if helpful
Kalyan

Similar Messages

How to find Extract for the bank key/ bank account changed in vendor maste

Hello Gurus,
I need help in finding the extract for the bank details of vendors changed for a period of time. I tried using FK04 under multiple selection and ran the report for the selected vendors. It only shows the "bank details created" or "bank details deleted" under Old Values and New Values but doe not actually shows the values for the field changed.
Is there a way where i can get a report which shows a log of change in bank details with old and new values,
Thank you,
Prakash

HI,
Try using report RSSCD100 and give the selection condition
Object id --> BANK
and then you can limit the results by specifying the time and date range..

How to create a System Extract for Communication

Hi,
I've built System Extracts before but not for Communication. Does anybody know what the steps are to create a System Extract for Communication? I already built a particular Communication Type and the delivery method is email. I was told that Oracle only creates the trigger for this Communication Type but not the email. If I built the System Extract Communication and run it, is that supposed to send an email? and if so, what kind of information will be sent in the email?
Thanks,
Ronaldo

Hi James,
If you like to use SAP web dispatcher as a solution for load balancing portal application, you no need to create system object under systems..
You have to install web dispatcher as separate instance where you need to configure portal apps into it..
Configure web dispatcher like to hit the admin port, use http://<webdisp-server>:<adminport>/sap/admin
For normal portal access, use http://<friendly URL>/irj/portal
The good news is that the webdispatcher knows that the portal supports SSL
Another advantage of this config, is the webdisp, will just replace the apache redirect server. Users will access mycompany.com, without any port number, since we are redirecting 80 to the backend j2ee. Also, https should work like in the normal world.
Profile will be like below...
SAPSYSTEMNAME = WEB
SAPSYSTEM = 00
INSTANCE_NAME = W00
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
Message Server Parameters ##########
NOTE: The "ms/http_port" must match the profile on the Central Instance
rdisp/mshost = <FQDN of portal CI Host>
ms/http_port = <Ms port of portal>
SAP Web Dispatcher Ports
#icm/server_port_0 = PROT=HTTP,PORT=81$$
icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=3600, EXTBIND=1 (some OS will not allow to bind ports <1024)
Admin port details
icm/server_port_1 = PROT=HTTP,PORT=3200
#, EXTBIND=1
icm/HTTP/admin_0 =
PREFIX=/sap/admin,DOCROOT=./admin,PORT=3200,AUTHFILE=/usr/sap/WEB/SYS/global/security/data/icmauth.txt
SSL
icm/HTTP/redirect_0 = PREFIX=/ , TO=http://<friendly URL name>/irj/portal
WebAS Message Server Parameters
rdisp/TRACE = 1
icm/trace_secured_data = 1
Regards
Suresh

Adobe Premiere Pro CS5.5 Family- 'extracting' for 24 hours and I can't cancel it and start again

Hi
I've been trying to download the trial of Adobe Premiere Pro CS5.5 Family for 24 hours now. It downloaded in Adobe Download Assistant fine and the it started 'Extracting'. Its been extracting for 24 hours and the close or pause buttons next to it are not available to press so I can't stop it and try again.
A message half way through did pop up saying 'opening premier pro, verifying...' but then a warning sign came up saying 'the following disk images couldn't be opended. Reason: Invalid Checksum' . Don't know if that has anything to do with it but on Adobe Download Assistant it is still 'Extracting'.
I am working on a year old Macbook Pro with a fast connection to the internet.
Thanks

buenas dias, yo intentado descargar adobe CS5 standart, premium ... pero todos los ficheros se paran en 49°/° y no van mas, no se que hacer, intentado con todos los exploradores de internet . gracias

DART: creating extracts for company codes

Hi,
in light of an archiving project of financial documents, extracts needs to be build with DART. This has to be done on the level of company code. We would like to have approval from the FI department for the DART extracts, but we have currently 22 different company codes.
Do you have experience with creating extracts for multinational companies, and what was your way of working for getting approval before archiving ? Were there any external tax auditors involved ?
thanks for sharing,
kind regards,
Rolf

Hi Rolf,
For your project you have to make a table with document type's G/L accounts how long you want to let them them in your system. This form (table should be signed of by the bussines and auditors.
Note: When you archive data for FI you can archive the documents (BKPF/BSEG and line items. When you only archive the documents you can still see al the postings on line items. When the archive files are still available you can go direct from the line item to the achived document. Have a look to to the archive information system perhaps here you can store more information with linkes to the archive system?
In some FI reports it is possible to get information out of SAP and the archive system.
With the table make a proprosal by yourself and let sign that.
Think about that a lot of information is stored on other places to, like controlling and PCA. Offen there is no reason to keep the FI documents the information is still somewhere els available
Paul

Extraction for Cube 0PM_C05 requires customizing of table T_PMC05

Hi can any body tell how to solve this error.
Extraction for Cube 0PM_C05 requires customizing of table T_PMC05.
Iam loading data to 0PM_C05 CUBE which has a datasource 0PM_PRM_PLCS_1 which is displaying as errors in source systems.
This is a plant maintenence cube and ia replicated the datasource agian in BI Production and it is active.
Edited by: manukonda anil kumar on Feb 17, 2011 5:45 AM

Hi syed
Take the help of an ABAP person.
There will be same table resembling the name .
So the data needs to be updated in the corresponding table .
When the core people are updating data from different palnts and sites accross.
In my case i haven't moved further.
This is a configuration change form R/3 side where the data had to be fetched in the orrect table .
Regards
Anil .

Logistics extraction for QM - qRFC problem

Hi,
I have problem with LO extraction for QM - with delta.
There are several records in 2 ques (MCEX05 and MCEX05_1), but the job for moving them into BW delta always ends with errors (Message_type_x).
I'm thinking about deleting this que and start reconstruction for application 05 again.
Would this help?
The structure of one DS (2lis_05_qe2) has been changed with append structure, maybe this could also be a problem.
There is also one doubt:
does deleting qRFC (transaction LBWQ) affect any other area then just BI extractors for particular application? I'm affraid to harm some ERP processes?
Thank you,
Tom

Hi
If I got your question properly, If you are trying to change the Data Source (LO) then it would be locked for the users to report on the same.
Appending / enhancing will break the Delta Runs also some times. Thats the reason whenever we are planning for the Strcture change we will run the Delta and make sure that the Queue has no runs.
But deleting LBWQ would not effect on ERP Process as it picks up only New/changed Delta Records.
Hope it helps and clear

Error in data extraction for 0TCT_DS22

Hi All .
I am facing issue in data extraction for 0TCT_DS22 , its giving message 'error in source system ' and also giving a dump
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 24.05.2010 11:22:53
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
As per following thread i updated the table but still data load is failing ( Our system is at EHP1)
DataSource 0TCT_DS22 not extracting Data
Any pointers what could be the solution for this data load failure .
Thanks.

Hi Neetika,
This type of error occures due to lack of memory in server or no process is available for request process.
Please refer below forum.
Re: Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Have you done any custom coding? if yes then check the loop.. endloop statement. (not closing loop)
Thanks & Regards,
Ashish

* Delta Extraction for 0ASSET_ATTR_TEXT

Hi All,
Can someone help me for the delta extraction for 0ASSET_ATTR_TEXT datasource.
Steps performed as per SAP Help
1. Activated the BADI
2. Ran the initialization without datatransfer infopackage.
3. Created new records in R/3 side
4. I can see the newly created records in the Table : BWFIAA_AEDAT_AS
5. Ran the delta infopackage ( no records are getting updated)
When i check in RSA3 with the delta update, its giving an error.
Please guide me if i am missing any steps
Regards
Ram

Hi Ram,
Check this note,
Note 816560 - DeltaInit w/o data transfer does not createe time stamp
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=816560
Hope this helps....

Delta extraction for masterdata object

hi,
can anybody tell me the procedure for delta extraction for master data object.
is it possible!

Master Data Datasources do allow for delta extraction. You can display datasource in RSA6 and check if it is delta enabled. You will have to initialize with delta to perform delta extraction. RSA7 will give you delta queues in R/3

Delta Extraction for 0FI_GL_6

Hi,
We are facing a problem in the delta extraction for the data source <b>0FI_GL_6</b>. 0 Records are populated into BW whereas in the Extract checker (RSA3) of the source system shows 1000 records. Moreover the delta queue (RSA7) has an entry for 0FI_GL_6 but no data is displayed inside it.
Kindly advice.
Reagards,
Vidhya

Hi,
This extractor works based on time stamps so wait for a day to get the data.
have a look of the thread :
Re: delta not working for 0FI_GL_6 & 0EC_PCA_1
Regards
Happy Tony

Does Extract for PSD support smart objects?

I have spent some time exploring Extract for PSD and so far it it fantastic. I can really see this being useful when passing on my PSDs to my developers.
One feature that I would love to see would be support for smart objects. I use smart objects a ton in my web designs. For example when I create the footer I will make it a smart object so that it stays consistent throughout all my layer comps. currently in Extract for PSD all smart objects seem to be flattened. It would be great if my devs could click into the smart objects and access the content within.

You are right that we don't expose this right now. We do have plans to do this in the future soon!

Delta extraction for dunning history is not active

Hi all,
I am loading data to the FI Cube (Financial A/c -> Contract a/c receivables ) Dunning header .
This is a Standard infocube. This cube contains two DSOu2019S 0FC_DS08 , 0FC_DS11. When I starting the data loading from the DSO ( 0FC_DS08 ), I create the INIT package . When creating itself it throwing the error u201C Delta extraction for dunning history is not active u201D
When I check on SDN SAP , ( Use Tcode sbiw. Select 'Settings for apllication-specific datasources (PI) ->Contract Aacounts Receivable -> Make Central Settings'. Then tick 'Delta Extraction for Dunning Items Active'.) I got this link. But I could not proceed this link. Can you explain detailed step by step how to proceed to solve this issue.
Regards,
Baskaran.

Hello Baskaran,
Did you ever solve this issue?
We do not have the link in SBIW (ERP 6.0 EHP6).
Thanks,
Andreas

2 extract for 1 replicat

Hi all
i have one problem, i will create 2 database instance then configure goldengate each database instance.
sourceschema t1.rep_table01 DB1 (extract process) --|
|----> destination schema dest.rep_table01 DB03 (replicat process)
sourceschema t1.rep_table01 DB2 (extract process) --|
this topology possible on Oracle GoldenGate 11

I'm guessing your question is not really 2 Extracts for 1 Replicat, it's that you have two source tables feeding 1 target table, which is totally possible with GoldenGate as long as the table on DB1 is segmenting the key values from DB2's key values, so that you don't have conflicts on DB3.
And as Antony points out, you would use 1 Replicat for each Extract, and those two Replicats would be applying data to the 1 DB3 table, asynchronously. So again you'd have to ensure uniqueness between DB1 and DB2 data.
And if you are asking about 1 Replicat for 2 Extracts, you can't do that, nor can 2 Extracts write to the same trail, so you'll have to do 1 Extract and 1 Replicat per DB.

Infospoke error +The last extraction for this InfoSpoke is not yet Complete

Hello Experts,
I am receiving the error "The last extraction for this InfoSpoke is not yet Complete " while starting the load for Infospoke.
Please advice
Thanks and Regards,
Rezwan Asraf Ali

Hi,
This error RSBO320 is usually related to an inconsistency of infospoke internal tables which is will need to be reset manually by SAP developers. So you'll probably be best opening a ticket under BW-WHM-DBA-OHS.
Rgds,
Colum

2LIS_11_VAHDR_INIT Extraction for SD_C03

Similar Messages

Maybe you are looking for