2LIS_11_VAHDR right-click not showing Transfer Rules

Dear gurus,
I have 2LIS_11_VAHDR under my SD Application Components at DataSources tab. I replicated the datasource with ECC and activated it. Now I want to install the rest of the dataflow - transfer rules, infosource, update rules, sd_c03, and the queries.
I am right-clicking on the datasource, but it is not showing the Transfer Rules. My understanding is that when we right-click -> transfer rules -> in the content tab we put our datasource name again, and takes it to the BI Content tab.
Why is 2LIS_11_VAHDR not showing Transfer Rules after right-clicking?

Hi Saurav,
If not from the Right Click,you can install it from the Business content 3.x flow ,which is at the end of the Business Content.
Rgds
SVU123

Similar Messages

  • Not getting transfer rules for 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL

    Hello Bi experts,
    Actually i am implementing standard Purchasing module in BI system.
    While implementing , i have installed cube 0PUR_C04 with data flow before options.
    After installation , i am not getting transfer rule for 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL .
    I am getting transfer rule for 2LIS_02_S011 only.
    0PUR_c04 contains these 4 dataspurces - 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL , 2LIS_02_S011 .
    So how can i get these transfer rule. and if we want to implement std Purchasing module in BI , which Cubes are required or necessary.
    In metadata repository also , for Cube 0PUR_c04 , it does not showing transfer rule HDR/ITM/SCL. there also it is now showing transfer rules.
    I will be also very thankful if anybody just give me overview of purchasing.
    Thanks,
    Sada.

    Hello Mani,
    Thanks a lot.you are the first one who has answered my que. which i expect .
    Look at following floe in infoprovider in my system. and please tell me what exactly i should do?
    Cube->Purchasing Groups                                                                                0PUR_C04
               Update Rule->0PUR_C04 2LIS_02_HDR                                                                       AY0XVMCJPXXXXXXXXXXXXXXXX
                                    Infosource->Purchasing Data (Document Header Level) as of 2.0B      2LIS_02_HDR
               Update Rule->0PUR_C04 2LIS_02_ITM                                                                         4YSO2PF9XXXXXXXXXXXXXXXXX
                                     INfosource->Purchasing Data (Document Item Level) as of 2.0B          2LIS_02_ITM
               Update Rule->0PUR_C04 2LIS_02_S011                                                                      CSB3FHGQXXXXXXXXXXXXXXXXX
                                     Infosurce->Purchasing groups                                                               2LIS_02_S011
                                                      Transfer Rule->from 2LIS_02_S011 for SC4 Client 600        2LIS_02_S011                  SCXCLNTXXX
                                                                             Datasource->Purchasing groups                    2LIS_02_S011
               Update Rule->0PUR_C04 2LIS_02_SCL                                                                        4ZZ0DMZXXXXXXXXXXXXXXXXXX
                                     Infosource->Pur.Data (Document Schedule Line Level)                         2LIS_02_SCL
    Mani i am expecting answer from you.
    Thanks,
    Sada

  • Aperture Right Click Not working

    I have been using Aperture for awhile and all of a sudden the right click menu takes almost 25 seconds to come up. In that time all you have is the spinning color wheel and in Force Quit Applications Aperture shows up as Not Responding. I tried using Aperture on another user account and it does not have the problem so it has to be something that I did. . .
    So I had started to use Time Machine about 1 week ago, I installed than uninstalled a program called DropBox which could of changed the settings. And thats about it except for daily usage. So does anyone know where the strings or whatever are stored for Aperture so that I can get ride of the bad ones?
    Or have any other solutions?
    Thanks for the help,
    Hudsora

    I did the repair disk permissions, and that did not solve the problem. I was incorrect as in saying that nothing new was installed. I did get a Flip Video recorder which installed some software components when I first plugged it in. So I am guessing that when that happened it changed a component of a common file that both Aperture and the Flip Video Player use. I don't need the component for the Flip because I found a new way to transfer it, but I need to find out which file it changed and how to get it back to the origional file that Aperture can use. . .
    So ya if anyone has any clue on how to do that, that would be awesome!
    -Hudsora

  • RSUPDINFO does not contain transfer rules CODEID's

    I did the following:
    1)  Go into table RSAABAP and got all the CODEID's for my search string.  
    2)  Take those CODEID values and use them as a filter for table RSUPDROUT.  No entries came back which tells me that these CODEID's are NOT for update rules.
    3) Tables RSUPDROUT and  RSUPDINFO only contain update rule code and not transfer rule and not start routine code.
    Where can I get the same info as table RSUPDINFO for transfer rule and start routine CODEID?  Any input would be very much appreciated. 
    I am trying to come up with a list of transfer routines, update rules and start routines that contains a certain search string. I can get the list of CODEID from RSAABAP table but based on the CODEID alone, I can't locate the name of the cube, infosource, etc. if the CODEID is not an update rule.

    A.H.P.,
    Thanks - almost there because of your help! I executed SE16 for table RSRSRULES and entered CONVROUT_L = 10 CODEID's and got back only 4 CODEID's back.  Why didn't it show me  records for all the 10 CODEID's I entered?
    This table holds transfer rule info, do you know what table holds start routine code?  Maybe the 6 missing CODEID's are start routines and are held in a different table.
    (I switched company so that why was I had to create another SDN user ID).
    Thanks,
    Thao

  • Track pad left right click not working

    I am having problem with trackpad on Macbook pro as right and left click to show options do not appear on click.Wonder what has gone wrong

    System Preferences > Accessibility > Trackpad > Double click speed
    Lower it a bit.

  • Connected Apple devices - can no longer right click to show info

    I have iTunes 12.0.1.26 installed, but now find that you are no longer able to right click on any connected Apple device and look at the details of that device, such as space used, software version, or look at the device settings for syncing Calendars and Emails etc. Why have these options been removed? If I right-click on my iPhone, the only options I get are Play, Shuffle, Eject, Reset Warnings. You actually cannot click on the device itself to reveal this information, all you get is the expansion arrow to the left and the sub-menus underneath, such as Music, Films etc.
    Not all of my devices are on the latest software version, particularly my iPhone, as I cannot fit it on!

    View > Show Sidebar or Ctrl+S. Your device should be on the left like iTunes 10. Do the results change?

  • Right Click not working in DC prespective

    Hi
    I am facing a unusual issue
    When I try to  do click on any DC in Inactive / active DC or for that sense in Local DC area also in DC prespective somehow the right click does not work I tried to find some errors in .log file also but no errors are showing up there also
    Can anyone tell me what I need to do to resolve this issue
    Regards
    JM

    John,
    try to remove the .metadata folder and see if it works.if it doesn't then reinstall NWDS
    Thanks
    Bala Duvvuri

  • Why keyboard and mouse right click not working in Solaris and Linux?

    Hi all,
    I have two problems:
    1) I am working on AWT/Swing application and its working fine in window enviornment,but while running on solaris and linux mouse right-click option window not poping up.
    2) Ctrl+c,Ctrl+v,Home and End keyboard key are not working in solaris and linux OS for same application.
    Pls provide me some solution for these problem.
    -Dinesh

    Hi Nik,
    Thanks for reply. I found some solution for the above problem.
    For mouse right click there was problem in my source code.I have not implemented the mousePressed() method
    In case of keyboard Home, End and arrow key working fine after exporting AWTUSE_TYPE4_PATCH=false; in solaris and linux
    But still Ctrl-c and Ctrl-v not working.
    I am using JDK1.5.0_07+Eclipse IDE 3.1
    -Dinesh

  • Right click not working on BI web report

    Hi,
    We are facing an issue while working with BI 7.0 on Web.
    When we execute a report on the web and right-click anywhere on the characteristics, Menu options-Filter, Change Drilldown, Broadcast & Export etc - are displayed for the first time. After some time when we right click again, the menu options do not appear and even drag and drop does not work.

    Hi Nisha,
    Could you help us with what GUI front end version and patch do u have, What BEx version are u using.
    May be you should upgrade you gui to 7.10 and patch 11 or 12, and also install the corresponding BW and BI addOn.
    Bim, Let us know what your version of BEX and GUI front end is.
    reagards,
    Sree.
    Edited by: Sree Nair on Sep 8, 2009 7:19 AM

  • Right Click not working in published output.  ??

    I'm relatively new to Captivate, and NOT a developer, so please bear with me on this.
    I'm recording a training video of a basic application and have a need to use a right-click to bring up a menu.  This is a requirement of the app, so I need Captivate to provide the same functionality to avoid confusing the user going through the training video.  I have the Click Box options set to Right Click, and it works in the Preview.  However, when I Publish the finished video, the right-click does not work - only a left-click will advance to the next slide.
    I found a few threads discussing issues with the right-click, but all of them were dealing with permissions issues.  I'm saving the output to my desktop (Windows XP) and am launching the HTM file to confirm the video is working properly, so I don't see how a permissions issue would come into play.  ??  If it is a permissions issue, how do I fix it within Captivate so that the end user can run this from any PC/MAC, where I have no control of their permissions?
    Any suggestions or tips on how to get the right-click working in the final product are greatly appreciated.
    D

    Hi there
    The right-click function relies on JavaScript. JavaScript may also be influenced by the Flash Security Settings.
    Please try what is outlined in the link and see if your right-click suddenly begins working. Also note that you don't need to adjust these settings if you are serving content from a server. You only have to worry about it if you are testing by running from your local C drive.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Logic Pro X.  Right-click not working in the piano-roll editor.  And colour issues.

    I usually use the right mouse-button to open the toolbox under the cursor but this doesn't appear to work within the piano-roll edit window in Pro X.  Is this the same for everyone?  The right-click works in all other windows.  Seems pretty odd.
    Also is it just me who finds the near-black background very oppressive?  I worked in front of Pro X for several hours yesterday and was left wishing I could change the background colour of the main and edit windows.  Is there any way to do this?
    I also really need to be able to access custom colours for the colour palette as the new palette doen't sit at all well with me.  Any ideas anyone?  The manual states that if you double-click on a colour it should open the colour editor but it doesn't.....

    It turns out that if you assign the right button to 'Open Tools and Shortcut Menu', it works in the piano roll.  It's obviously a bug which should get ironed out.
    The other thing that's driving me nuts though is that when I change tools in the main window, the pointer still appears like an arrow, even though its function has changed.  When I pass it over a region, it usually changes to to the correct icon - but not always!  Aarghhh I'm going back to Pro 9 for now......

  • Clickpad Right Click not Working Consistantly

    I just purchased an HP laptop with a Clickpad and reviewed your documentation for what areas on the pad to use for clicking however I can't seem to get a consistent right click even when I click in the area indicated by the diagram.  I can be almost in the bottom right corner of the pad's surface and still get a left click response.
    Is there a trick to it I am missing or do I have a dud?

    Hello Kyraoko,
    Welcome to the HP Forums!
    I understand the right-clicking action on the touchpad, of your notebook, is not working properly. It is likely a hardware issue, to be honest. However, please try the following steps before assuming anything:
    1. Tap the upper-left corner of the touchpad a couple of times to turn it off, then turn it on. This is considered resetting the touchpad.
    2. Performing a Hard Reset or Forced Reset is the next step. A hard reset clears driver instructions, recent configurations, etc. This forces the hardware to reread all instructions from the drivers and software stored within Windows.
    3. Update the mouse/touchpad driver. These instructions will guide you along the right path:
    a. Go to the HP Drivers and Downloads webpage. Enter your computer model number and then click Go .
    b. Select your computer model from the list of results.
    c. Select your operating system from the drop down menu and then click Next.
    d. Scroll down to select the driver category "Driver - Keyboard, Mouse and Input Devices".
    e. Click the Download button next to the appropriate TouchPad or ClickPad driver. The file downloads to your Downloads folder.
    f. Open your Downloads folder and double-click to install the latest driver. Follow on-screen instructions to complete the installation.
    Source: Using and Troubleshooting the TouchPad or ClickPad (Windows 8)
    4. If that doesn't work, we will have to try a more direct approach of reinstalling the mouse driver:
    a) Go into Device Manager, then "Mice and other pointing devices".
    b) Right-click on the touchpad driver, and select "Uninstall".
    c) Restart the computer. This will force a new driver to be written based on the detected hardware.
    5. Try connecting a USB mouse to the computer. Test it to see whether or not it is working properly.
    If those steps do not help, then I would call HP phone support so they can physically address the hardware of the touchpad. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
    Please let me know if you have any other questions or concerns. Thanks for posting, and have a great day!
    Mario
    I worked on behalf of HP.

  • Ctrl+Right Click not working

    Hi all,
    I am using EP version 6.4 and ESS/MSS 100 SP 22. Backend system is ECC 5.0 and SAP-HR/EA-HR SP75.
    I am unable to do end user personalization in the portal iviews. Ctrl+Right Click is not working. Any idea whether this works on this version or not?
    Thanks

    Webdynpro Personalization is a feature available from EP 7.0.
    I don't think it will work in EP 6.0 versions.
    Thanks,
    Shanti

  • Mighty Mouse Wireless Right Click not working

    Hi Friends!
    I am having some difficulty getting my Right Click on my Wireless MM to work. I am aware that I need to keep my left finger off the mouse but it still does not seem to be working.
    Any thoughts ?
    Thanks !
    J

    Try replacing the battieries (or just taking them out and putting them back in). Forcing the connection between the Mighty Mouse and the iMac to break. Then put the new batteries, or the ones you were you using from before, in the MM.
    Re-link the Mighty Mouse to the iMac and try applying the settings for the right click function in System Preferences.
    Remember to mark as helpful or solved.
    -benny

  • Right click not working in sap gui for html in transactions

    Dear experts,
    i m using sap gui for html in transations iview
    but when i go to trasaction and click on some field automatically blank window comes(no any trasaction or no any field view)
    it not happen on all the field but on some field for eg;- when i use tcode zhuct right click on first field works properly but other field not execp right click(blank window comes)
    please help im in great problem.
    due to this problem i am not able to impliment portal

    Don't open 2 threads for one issue.
    Anja Engelhardt
    Moderator

Maybe you are looking for

  • Move 10.6.8 Dovecot to clean server setup 3.1.2

    Hi All, I am planing to do a clean Server.app 3.1.2 on 10.9.3 setup. I currently have a 10.6.8 Server running e-mail. Both are Dovecot but when I setup new Users on 10.9.3 they will have new GUID. The Dovecot mail directories will not match without s

  • Do we need rpm package oracleasmlib for using Oracle ASMLib?

    ..The Oracle ASMLib kernel driver is now included in the Unbreakable Enterprise Kernel. No driver package needs to be installed when using this kernel. The oracleasm-support and oracleasmlib packages still need to be installed from ULN+ http://www.or

  • Invalid sim after installing 6.1.4

    I Phone 5.. Installed 6.1.4 and now phone says invalid sim. Phone worked fine before installing this update?

  • Sequence and Cache

    I created a sequence: SQL> create sequence s increment by 1 start with 1; then, SQL> select s.nextval from dual; 1 SQL> select s.nextval from dual; 2 it works fine. But when I shutdown my Windows2000 Server (where Oracle 9i is installed) and restart

  • How do i change my apple id info on my iphone 4?

    Recently changed the email on my Apple Id account, and there is no easy way to change the email on my phone. So a box constantly comes up asking for me to enter a password for the old apple id email, but I can't change the email!!!!!