2lis_11_vahdr

Hi,
We have enhanced 2lis_11_vahdr to get payment method from VBKD table.
When we change particular sales order and save the delta record is not being captured in LBWQ or RSA7.
but if i fill the setup table for this sales order i can see the data.
We are using Qued delta.
Can anone suggest what would be the problem.
Thanks

You should have enhanced 2LIS_11_VAITM data source as VBKD is an item level table and VAITM has data coming from this table.
Delta will work if you use VAITM data source.
Delta must not be coming in VAHDR table as changing the data at item level in VBKD is not changing anything for the order at header level.
I hope it helps.
Regards,
Gaurav

Similar Messages

No data in RSA3 for 2LIS_11_VAITM and 2LIS_11_VAHDR

hello experts,
i want to extract data from 2LIS_11_VAHDR and 2LIS_11_VAITM but dont see any data in RSA3.
I have already activated the datasource in RSA5 and LBWE. After running the setup tables using OLI7BW i still dont see any data in RSA3.
Pls advice... is there something i am missing?
thanks
Jagpreet

Use SE16 and verify that there is data in the MC11VA0HDRSETUP table. If there is no data, then your setup tables were not updated (or the setup extracted no records).
In RSA3, make sure you select Update Mode of "C" or "F". This will check data from the setup tables.
Hope this helps.

NO DATA error when running init load with 2LIS_11_VAHDR

hi experts,
I try to load initial data with 2LIS_11_VAHDR
the steps I did:
1. 2LIS_11_VAHDR is activated in R/3 Log.Cockpit LBWE
2. 2LIS_11_VAHDR is replacated in BW
3. Setup tables are filled for SD Sales Orders in R/3
4. testing 2LIS_11_VAHDR with RSA7 in R/3 delivers 981 records
when I start the info package with "Initialize delta process with Data Transfer" the error occurs "0 Records - NO DATA"
Any Idea what I'm doing wrong?
Best Regards
neven

Hi,
Go to bd87 transaction and see any yellow requests..If so select it and process manually.
or
In the monitor Environment->Transactional RFC -> in the source system.
Then give user id and pwd for source system and try to execute...see if any LUWs are pending and process them.

Sales Report problem with 2LIS_11_VAHDR, 2LIS_11_VAITM and other DS

Hi Experts,
I need your help in following topic. I have a requirement to build a big (overall) sales report in BI (NW2004s).
I would like to use BI Content because I'm running out of time and try to use all preconfigured stuff if possible.
In the requirement a bunch of fields of different SD DataSources are used (mostly 2LIS_11_VAHDR and 2LIS_11_VAITM but also some fields of other Datasources).
In SE16 I know how to locate all the field in the tables VBAK, VBAP, KNA1, VBKD,
LIKP, VBRK and of course some texts. Some fields could already be located by me, others couldn't even be found in BI.
The difficulty I have is to bring all the DataSources together so that the data is displayed correct - even if there are redundant parts.
For example:
For sales orders the doc no, sales org, distr. channel (and a lot of other header data) should be displayed in each line together with item data such as item no., material code, quantity (and a lot of other item data). If an order has multiple items each item should be diplayed in one row in the report.
In the Query the report should look like a common table (e.g. as in an ALV Grid if you model a query with SQ01) --> a lot of columns.
I'm not sure if I should use one big DSO with multiple InfoSources or if I should create a MultiCube and add the BI DSOs 0SD_O03 (Orders) and 0SD_O01(Order Items).
I know this is a very common requirement in SD. Do you know how to combine the most common SD datasources that no issues come up?
Thank you very much in advance,
Horst
Message was edited by:
Horst Henkel

Hi Horst,
Reporting on ODS / DSo is slow. I'm here at a cleint where we have lots of reports on SD_O01 and SD_O03. The best way to have good query performance is to build cubes on top of your ODS. Build a sales cube on top of SD_O03 with all fields and a billing cube on top of SD_O01. Load the data from your ODS to your new cubes. Then create a multipovider on top of both cubes, identify the keyfigures and characteristics required for your queries. Build the queries on top of the multiprovider.
You can display all items of a bill in one row if you choose drill-across for the irems in the query, instead of drill-down. So it looks for a standard SD report.
Regards,
Juergen

DataSource 2LIS_11_VAHDR does not exist in source system ECDCLNT100 of vers

Hi iam working on BI 7 and ECC 6 system. When i try to install the transfer rules for 2 lis_11_vahdr in BI7 business content, it gave a message that "<b>DataSource 2LIS_11_VAHDR does not exist in source system ECDCLNT100 of version A".</b> i have done an enhancement for this.I activated them from rsa5, activated both in LBWE as well as activated thier structures too after enhancing. I replicated and did all possible steps still iam unable to find.
Can anybody help me who has faced similar issue.
Regards,
Neil

Hi Niel,
Could you chek the RFC Connection of particular client.
Thanks,
Ram

Install Business content Infosource 2LIS_11_VAHDR on BI

Hello,
When i try to Install the Business content Infosource 2LIS_11_VAHDR grouping function I am selecting "In Dataflow Bfr and Aft"
In the left side under Infosource I selected 2LIS_11_VAHDR then the system is connecting to source system then I have to enter my user name and password then system asking you want to check you have full authorization I selected Yes.
after few seconds i got runtime error message:
Runtime Errors         ASSIGN_LENGTH_0
Date and Time          07/18/2008 22:36:54
Short dump has not been completely stored (too big)
Short text
Program error: ASSIGN with length 0 in program "SAPLSNR3".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSNR3" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Tried to create a field with length 0. This is not
possible.
Error analysis
In an ASSIGN statement in the program "SAPLSNR3" a field symbol with
length 0 should have been created. However, this is not possible.
length 0.
This is not possible.
Trigger Location of Runtime Error
Program                                 SAPLSNR3
Include                                 LSNR3F01
Row                                     178
Module type                             (FORM)
Module Name                             LOCAL_BUFFER
Source Code Extract
Line
SourceCde
148
ID 'NONRSWAP' FIELD TNRO-NONRSWAP.
149
IF SY-SUBRC < 4.
150
      Es wurden entsprechend viele Nummern gezogen
151
      Returncode berechnen
152
CASE SY-SUBRC.
153
WHEN 0.
154
           alles ok
155
P_RETURNCODE = SPACE.
156
WHEN 1.
157
           Nummern sind im kritischen Bereich
158
P_RETURNCODE = '1'.
159
WHEN 2.
160
           Das war die letzte Nummer
161
P_RETURNCODE = '2'.
162
IF NOT TNRO-NONRSWAP IS INITIAL.
163
MESSAGE E028 WITH BNRIV-FROMNUMBER BNRIV-TONUMBER
164
P_OBJECT RAISING INTERVAL_OVERFLOW.
165
ENDIF.
166
WHEN 3.
167
           Es werden mehr Nr. verlangt, als noch vorhanden sind
168
P_RETURNCODE = '3'.
169
IF NOT TNRO-NONRSWAP IS INITIAL.
170
MESSAGE E028 WITH BNRIV-FROMNUMBER BNRIV-TONUMBER
171
P_OBJECT RAISING INTERVAL_OVERFLOW.
172
ENDIF.
173
ENDCASE.
174
175
      Nummernstand dem Aufrufer zurückgeben
176
G_NR_LENGTH = STRLEN( BNRIV-FROMNUMBER ).
177
G_OFFSET    = 20 - G_NR_LENGTH.
>>>>>
ASSIGN BNRIV-NRLEVEL+G_OFFSET(G_NR_LENGTH) TO <G_F>.
179
P_NUMBER = <G_F>.
180
      Funktionsbaustein kann beendet werden
181
P_EXIT = YES.
182
EXIT.
183
184
ELSEIF SY-SUBRC = 4.
185
      Das Intervall wurde nicht gefunden
186
MESSAGE E751 RAISING INTERVAL_NOT_FOUND WITH P_OBJECT P_SUBOBJECT
187
P_NR_RANGE_NR TNRO-CODE.
188
ELSEIF SY-SUBRC = 19.
189
      Der Nummernkreis ist nicht intern
190
MESSAGE E752 RAISING NUMBER_RANGE_NOT_INTERN.
191
ELSEIF SY-SUBRC = 15.
192
      Overflow
193
IF NOT TNRO-NONRSWAP IS INITIAL.
194
MESSAGE E028 WITH BNRIV-FROMNUMBER BNRIV-TONUMBER
195
P_OBJECT RAISING INTERVAL_OVERFLOW.
196
ENDIF.
197
ELSEIF SY-SUBRC = 11.
Why I am getting this error message
Thanks

Roshan, Try the following steps again
1) Activate the Datasource in LBWE on ECC.
2) Replicate the Datasources.
3) Find the datasource and try to edit it. If the infosource is not installed it will try to install again.

DataSource 2LIS_11_VAHDR is not defined in the source system

I have a problem when I had activated the Data Source called 2LIS_11_VAHDR in ERP DEV and then put it in a request to be transfered to ERP Prod
Then I am using RSA3 I receive the following error
DataSource 2LIS_11_VAHDR is not defined in the source system
I tried to activate this data source several times in ERP Dev and send it to production without any success

I am sure you would have done these steps, but just a double-check.
1. RSA5 - Install the data source
2. RSA6 - Activate the data source
Check in LBWE if the data source is available.
All this will be captured in a transport request(s) - you may may have a Workbench request & a Customizing request.
Also, before transporting, please check in your target system whether the datasource is available or not (RSA5).
Further to the above, do a check in Dev for the following.
After activating it in RSA6, fill the setup tables for 2LIS_11_VAHDR - i.e. thru' transaction OLI7BW.
And check the data in RSA3.

Transformations for 2LIS_13_VDHDR,2LIS_12_VCHDR/ITM,2LIS_11_VAHDR/ITM

Hello all,
I implementing std sales & distribution module in BI 7.0.
So i am getting transaformation only for 2LIS_13_VDITM.
All other datasources 2LIS_13_VDHDR, 2LIS_12_VCHDR, 2LIS_12_VCITM, 2LIS_11_VAHDR,2LIS_11_VAITM are in 3.x.
i am not getting any transformation in BI contents.
So what can i do now?
can i migrate all these in BI 7 ? if i migrate these to BI 7 , can i get its transaformation , mappings etc after migration.
if i do it manually transaforamtion etc one by one where can i get mappings details for these datasource.
if i migrate these and when i create transformation for it , is automatically mapping will happen or i need to do it manually?
Please help.
Thanks,
Sadanand

Hi,
We dont have the TFs for those dataosurce.
Activate the Updaterules and migrate them to RFs.Even after migration from UR , you still need to do the coding of start routines,,etc.
Regards,
Anil Kumar Sharma .P

Procedure for delta intialization of datasource 2LIS_11_VAHDR

Hello experts,
I need some help with the delta intialization for the datasrouces 2LIS_11_VAHDR and 2LIS_11_VAITM. I'm working on SAP R/3 4.7C and extracting data to BI 3.5. I'll be grateful if someone could send some links where I can find the step by step procedure.
Thanks and regards,
Sumit

Sumit
You could also go through these weblogs on LO extraction
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
Thnaks
Sa

LO cockpit extraction differnce between 2LIS_11_VAHDR     2LIS_11_VASTH

Hi All
I have a doubt reg LO cockpit extraction(LBWE)
1. The SD extractors like
   2LIS_11_VAHDR     Sales document header
   2LIS_11_VAITM     Sales document item
   2LIS_11_VASCL    Sales document schedule line
   2LIS_11_V_ITM Allocation of order item/delivery item
   2LIS_11_V_SCL Allocation of order schedule line/     delivery item and so on ...............
But when i check the latest business content I dont find these Data sources under the below linketc.
http://help.sap.com/saphelp_nw04/helpdata/en/3c/63073c52619459e10000000a114084/frameset.htm
2. Instead I find 4 data sources as below
      2LIS_11_VASTH (Extraction SD Order Header Status)
      2LIS_11_VASTI (Extraction SD Order Item Status )
      2LIS_11_V_SSL (Extraction SD Sales: order Delivery)
      2LIS_08TRTLP(Shipment Delivery-Item Data by Stage )
Can I assume that these data sources (in 2) are replaced by the datasources(1) If not could you please let me know where can I find the documentation for
datasources in (1)
Could u please let me know any info as soon as possible
Regards
Naveen

Hi,
   Here is the links :
2LIS_01_S260/2LIS_11_VAITM:
http://help.sap.com/saphelp_nw04/helpdata/en/8f/36f338472b420de10000000a114084/content.htm
2LIS_12_VASCL:
http://help.sap.com/saphelp_nw04/helpdata/en/42/06f3381fff3358e10000000a11402f/content.htm
2LIS_12_VCITM:
http://help.sap.com/saphelp_nw04/helpdata/en/32/26f438151bc321e10000000a11402f/content.htm
and 2LIS_01_S264
http://help.sap.com/saphelp_nw04/helpdata/en/59/efe8375ae64014e10000009b38f8cf/content.htm
NOTE: Quotations is not included in the LO Cockpit.
and go through this link, this will gave some idea to you
about the Sales Business content model.
http://help.sap.com/saphelp_nw04/helpdata/en/3c/63073c52619459e10000000a114084/frameset.htm
hope this helps you.
regards,
ravi
Message was edited by: Ravi

ODP Data Source Delta issue 2lis_11_VAHDR 2lis_11_VAKON

Hi Expert,
I am pulling the data from SAP using ODP data sources. 2LIS_11_VAHDR 2LIS_11_VAITM 2LIS_11_VAKON.
For all the data sources I am doing the initloads. For 2LIS_11_VAITM data source after init load its enabling the delta.
For remaining data sources even if you try to pull the delta it's loading full load.
Steps I am following
LBWG do the deletion of setup tables.
OLI7BW fill the setup tables.
Run the data services job which pull the initial load. It loads all the data.
Change the ODP data source settings to Init load to No (Capture only delta)
In SMQ1 all the delta records will be captured
Run the Jobs which pull the delta records to ODQMON from there if you run Job in data services it has to pull the Delta records.
This is happening for 2LIS_11_VAITM but not for other data sources 2LIS_11_VAHDR and 2LIS_11_VAKON.
Event if you try to pull the delta records its loading all the records.
Can some one throw some light on this
Regards,
Murali.

In RSMO, go to the details tab and check in which stage the load has failed. If the issue is with extraction then go to Environment > Job Overview in the source system. Check if this job is complete.
I hope you must have cleared the Delta Queue, so now go and check if any entry is being displayed for 2lis_11_vahdr

STANDARD DATA SOURCE 2LIS_11_VAHDR NOT GETING DATA

RESPECTED GURUS
I AM A NEW BI USER. I AM TRYING TO EXTRACT DATA FROM 2LIS_11_VAHDR WHICH IS A STANDARD DATASOURCE THROUGH RSA3, BUT I AM GETTING A MESSAGE "0 RECORD FOUND" BUT THERE ARE PLENTY OF DATA. I WAS TRIED WITH THE OTHER STANDARD DATA SOURCES AND GETTING THE SAME MESSAGE" ZERO RECORD FOUND".PLS GUIDE ME HOW I WOULD I GET DATA.
REGARDS
ABHAY MAHODAYA

Hi Abhay,
The data source which you are trying to use is comes under logistics. To take the logistics data from R/3 to BW set up table needs to be filled up. To fill the set up table follow the below mentioned procedures.
First Delete the set up table to avoid data duplication:
Go to T.Code: SBIW -> Settings for Application Specific data sources (PI) -> Logistics -> Managing Extract structures -> Initialization -> Delete the contents of the setup table
Fill the set up table:
Go to T.Code: SBIW -> Settings for Application Specific data sources (PI) -> Logistics -> Managing Extract structures -> Initialization -> Filling in the setup table -> Application specific set up of statistical data
Choose the relevant node to perform the set up based on your requirement.
Remember while filling the set up table no entry sould get posted in the relevant tables. So while you do this in production system, you may have to request for user locking for the relevant T.Codes.
All the best.
Regards,
Sarath.

Missing records in 2LIS_11_VAHDR

Hello Everybody
In the outbound queue in LBWQ , I have one record concerning a modification of a header of a sales document. Ok.
When I run the job LIS-BW_APPLICATION-11_xxx to fill the Delta queue (RSA7), only 2LIS_11_VAITM is filled but not 2LIS_11_VAHDR....
This problem is only for specific type of sales document (AUART = 'ZSPE')....
Any idea ??
Thanks for your help !

Hi Cyril:
Go to transaction code LBWE and make sure the Extractor 2LIS_11_VAHDR is active, additionally review if you have marked an init load for 2LIS_11_VAHDR (you should see 2LIS_11_VAHDR on Delta queue-RSA7).
Regards,
Francisco Milán.

Is SAP 2LIS_11_VAHDR filled in real time

Hi experts
We have a problem with our extractors :
We have planned a chain to delta load data from that extractor right after our commands are integrated in our R3 system.
However the chain doesn't load anything.
If we re-launch it later it load those data.
Therefore my question is the following :
How long after I have updated/created my commands does it get info my SAP 2LIS_11_VAHDR and other related extractors.
Couln't find any clue either on SDN or documentation I have.
Thank you all for your help.

Hi
Thanks for your answer
I don't want to initialize a delta queue.
What I want is to understand why, while my commands where integrated a 1:28 am in my R3 system, and that my process chain start at 1.38am didn't brought any of those new data.
But if we relaunch the process chain a 3am, then I got the new data.
rvc, I didn't understood what you meant by the 'dataflow after', couldn't find it or I did not understand what you meant...
And you link
http://help.sap.com/saphelp_sm32/helpdata/en/07/64073c52619459e10000000a114084/content.htm
doesn't work
Thanks for you answers.

Initilization for 2lis_11_vahdr

Hi Experts,
I'm extracting data from 2lis_11_vaitm and 2lis_11_vahdr datasources. As I've huge data in production system. I want data from January 2009 to till data. I can able to get month wise sales orders.
1. I'm extracting data by giving the selection for sales orders (Sales order 1 to sales order 1000 in January month, SO1001 to SO 2000 in Feb month, SO2001 to SO 3000 in March Month like that)
2. I've extracted data till July month like that by giving sales order numbers.
Now I need to do initilization and need to set up for deltas.
Can I fill the set up tables with sales order range from Jan to July and do initilization without data transfer then scedule delta?
then Can I get the August records in delta with changed records for Jan to July properly?
Is it the correct apporach.
could you please through an ideas.

Hi SHarsha,
Data in Setup table and intializing delta is nowhere inter related. You dont need to have data in setup tables to fetch delta.
As in your case you have mentioned that you have data filled in setup only till July. So data only till July will be BI and if you do intialize delta the august month records will not be pulled in delta as those are historic records. Only new records will be captured.
Generally when going for any setup in BI, first we will fill the setup tables for that datasource and pull the history records from R/3 to BI for the interval range required. Then on a outage time we will intialize a delta. So going forward you will be able to get delta.
You have mentioned to have a data from 2009 to till date and moving on the delta also. For this you need to have a outage time since it is an sales datasource.
Fill up the setup tables till date data and pull into BI and do intialization without data transfer with date or peirod in selection condition(ex. 01/01/2009 to 12/31/9999). Going forward any changes happens to the records created on this interval or any new records will be captured in delta.
Hope this gives you an idea.
Akhan.

RSA3 - 2LIS_11_VAHDR

Hello,
I have a record that posted into BW a long time ago. It is sales document 10000181. It is from datasource 2LIS_11_VAHDR.
I go to RSA 3 and use that sales document as a selection criteria against datasource 2LIS_11_VAHDR.
I do not get any results? Why would that be?
I have entered it with leading zero's as well and still no luck. I would have guessed that since it was extracted at some point from this datasource, that I would be able to extract it again.
Can anyone help me with an explanation?
Thanks,
Nick

Hello George,
Thanks for the reply, you cleared up a little of my confusion regarding this situation.
I had thought that you could always get data results from RSA3, I thought that RSA3 actually grabbed the record from the tables. Not just the setup tables, and the last delta to process.
So I should always be able to get data from RSA3 records that are in the setup tables, right? In regards to delta's I won't be able to see their data from in RSA3 unless it was the last delta, is that right?
hmmm, I am probably going to have to start over with the data loading for this....since I do have some 'mysterious' gaps (may be the result of some LBWQ problems a while back).
Any advice on the process of reloading/resetting up data from Application area 11 and 13? I am thinking that I will
1. Stop my hourly scheduled V3 job from running and ensure that I have no data in the RSA7 queues (the job that moves the data from the extraction queue to the Delta Queue).
2. Clear out all my data in BW, (that I am going to re extract)
3. I will then delete the setup tables on the R/3 side (apps 11 and 13)
4. I will then fill the setup tables (apps 11 and 13)
5. Once the setup tables are completely reloaded I will run my Delta Init's
6. Next I will schedule the V3 jobs to run (we use Queued Delta)
6. Finally I will reschedule my Delta Process chains
Does that sound sensible...have I missed or overlooked anything?
Thanks a lot!
Nick

2lis_11_vahdr

Similar Messages

Maybe you are looking for