2LIS_11_VAITM delta with user status change (JEST, JCDS)

Hi,
I'm using standard datasource '2LIS_11_VAITM' for sales order delta, and I'm trying to add new fileds which is user status in 'Status' tab in sales order.
I thought it would be captured as delta if I change user status of sales order, but it's not captured as delta.
I'm trying to avoid using generic datasource with table 'JEST' or 'JCDS'.
Is there any way that user status change can be captured as delta?
Any help would be much appreciated.
Regards
Bryan

Hi Bryn,
Normally when the status is updating is there flag is updating accordingly.If yes considered that field also for enhamncement then delts records will be picked for user status.
More details check with SD consulatnt they will provide the complete details.
Regards
Ram.

Similar Messages

User Status change problem in Process Order

Hi,
We are in process of upgrading our system from 4.6C to ECC 6.0. I have a problem with User status change for process Orders.
In 4.6C we are using the profile x with settings:
10     ZNEW     Created process order     10     90     1     1     ZSTA
20     ZLCK     Locked process order     20     90     1     1     ZREV
30     ZOPN     Reopened process order     20     90     1     1     ZOPN
40     ZMST     MES order started     20     90     1     1     ZMST
50     ZMCL     MES order closed     20     90     1     1     ZMCL
90     ZTEC     Technically completed      20     90     1     1     ZTEC
In ECC 6.0 we also use the same profile settings as above.
The problem is in ECC 6.0 when I do a goods receipt the User status changes to ZTEC . The process followed is ..Create process order, Release Order, Goods issue, Phase partuial confirmations, Goods receipt and then Finla confirmations of phases. Now in 4.6C if i do the above process the User status remains at ZMST and it only changes to ZTEC when i technically complete the order but in ECC 6.0 when I do a goods recipt from above steps the User status changes to ZTEC. THis should not happen.
Any pointers will be very helpful.

Hi,
The log for production order preliminiary costing is not saved. Therefore, once the order is saved, there is no log available anymore (this is by the way a question of PP; none of the logs is saved).
Hope that helps...
Regards,
Declan

How to generate a report from crm table to find out user status changes

Dear all,
Could you please help me on generating a report from SAP CRM table level
to find out user status changes in crm orders for a specific period of time?
Thanks in advance,
Regards,
Shaik

Hi Shaik.
You would not need to write report for this. You need to create a Table view mainenance for the CRMD_ORDERADM_H or CRMD_ORDERADM_I for whichever you need.
Follow the below or search on google for more on table view maintenance.
Go to SE11, give the table name and click on change. Then Go to utilities--> Table maintenance generator.
In the table maintenance generator screen, you should give Authorization Group,
Function Group name (Function Group name can be same as table name),
Maintenance type can be one step or two step, usually you will create with one
step. You should give maintenance screen number. After clicking on create button,
a table maintenance generator will be created.
To check it go to SM30 . In SM30, you find display, Maintain options.
You can view the table contents by choosing Display and supplying the selection criteria of dates.
Regards
Apoorva

EXIT/ BADI/ Enhancement point for User Status change in Order

Hi all,
I am looking for an EXIT or a BADI or an enhancement point specifically for user status change in an order thru IW31/IW32.
I have the exit names for Order PBO, PAI, 'SAVE' event etc. so m not looking for generic answers.
I have to put some validations for the Order on USER STATUS CHANGE. Let me know if any of u have any pointers on that.
Thanks and Regards,
Sonal

Hi,
Use this Enhancement IWO10009 and call these function module to change the User Status
STATUS_TEXT_EDIT --> To Read the existing status.
STATUS_CHANGE_INTERN_VB --> to change the status.
Regards,
Satish

User status change in inspection lot

sir,
when i am doing ud in qa11 that there is compulsary a USER STAUS must be QAA Aprroval by QA manager if user staus is QCNA not approvewd by QA manager then it gives error for user status changes must be compulsary.
so where we can change that user status of .I have a one option in qa02 is there any another options.
Please guide me

Dear Prakash
If you want to manualy change the status in QA11, you can change there itself. Near to the user status there is a change where you can change the user status ( Set status button - tick and change button)
Regards
Gajesh

The condition for action don't work with user status

Hello,
we have some problem with define conditions for actions of SLA Monitoring:
Schedule condition with system status (Example:"&CRM Service Product Item.System Status& = I1002") is implemented.
But schedule condition with user status ("&CRM Service Product Item.User Status& = E0005ZLFC0001") is not implemented i.e. the action for message with user status = "E0005ZLFC0001" is not executed.
Please help us.
Best regards,
Alexander.

Hi Anette ...
The app runs on iOS 5.1.1 or later as noted here > https://itunes.apple.com/us/app/bejeweled-hd/id517260318?mt=8
But does not necessarily mean the developer updated the app for iOS 8 compatibility.
Click Bejeweled HD Support at that link.

User status change document

There is a requirement , the project will be created and then a user status will be changed in 5 steps as the project goes through approval process and at the end of the process the project will be released. I want to tract down the entire process of the user status change over time. How can I do that, creating change documents for status profile? But in one place I found that change document only created if system status is set to released? In my case system status will be set to release only after all the status change in user status happened.

Hello,
Asides from the obvious adding of a new status to status profile SDADHEAD, you may want to have a look at the SPRO activities:
SAP Solution Manager
-> Scenario-Specific Settings
-> Change Request Management
   -> Extended Configuration
    -> Change Request Management
     -> Change Transaction
      -> Change Transaction Types
        o Define Status Attributes
Also activity "Make Settings for Change Transaction Types" in the same path is important.
Best regards,
Miguel Ariñ

Process chain failed with Error-Status Change of Process ABAP ZL321NIMIMUUT

Hi,
process chain got failed with Error --**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**

Hi Neha,
When we do the repeat after right click then we are getting this messege"--**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**"
I have come to know that there is one ABAP programe when we go to manage varient.
ABAP Programme"ZBWR_ZMYYNNINOH_CSV_CHANGE"

User Status change date

Dear All
For an ABAP report , i need to find the table names for date and time of change in the User Status for the Maintenance Order. ( for example from INPR to RETN)
I have tried JEST and CRM_JEST tables but couldn't found the correct result.
Pl advice.
thanks in advance
Regards
Manish Bansal

Take the object number OBJNR and go to table JCDS
Field Status STAT starting with 'E' i.e., your user status.
You also have time/date fields there.
Regards
Sreenivas

Email notification in Charm with several status changes

Hello,
according to OSS 1275036 I tried to implement email notification in my Charm-process using BADI AGS_SDK_SCHED_ST_CHD in my schedule condition. If a new partner is responible in Charm-process, this partner should be notified by email. The email should be send if user status is changing.
It still works for my change request (notification of change manager) and the first step of my change document (notification of developer). But for all following steps (e.g. notification of tester) no action for email-notification is found in my change document.
In my actions I only use schedule conditions (according to OSS) and no start condition. To use the BADI for several user status, I maintained my user status in field value instead of inital value.
Does anybody know, how to use this BADI for several status changes in my change document?
Thanks,
Laura

Hello together,
I solved my problem by using CRM Standardcustomizing. Forgot SAP note 1275036 and 865619. They are all bad and not sufficient for a complex Charm scenario.
I only used note 1275036 for the first mail in my change document (email to developer). For all following mail notifcations I'm using actions based on workflow conditions instead of BADI.
Just using normal CRM-Customizing and create one schedule and start condition for every used action.
E.g. send mail to tester:
schedule condition:
&Servicevorgang CRM.Anwenderstatus& [*] E0002+DHFHEAD
and &Servicevorgang CRM.ErrorFreeFlag& = X
start condition:
&Servicevorgang CRM.Anwenderstatus& [*] E0004+DHFHEAD
and &Servicevorgang CRM.ErrorFreeFlag& = X
This works perfect, because you won't get several mails for one status if you save your document more than one time, which is a problem with note 865619.
Regards,
Laura Mathes

Need authorization for business document services attachment list with user status in ps claim for clm2 and clm3

Dear Friends,
client wants to restrict the attachment list changing, deletion after the user status sets to close in PS Claims for transaction clm2 and clm3.
Currently any one can attach documents as GOS and delete even the claim is completed and status is closed.
How can we restrict all users even who created the claim can not change create and delete attachment list documents once the claim is completed and approved and user status sets to closed.

HI,
what is the claim creation transaction in that 01 is for creation 02 is for edit and 03 for display so with the help of basis consultant you can assigned transaction in user's assigned role accordingly.
But user who is authorize for create claim can not modified or edit once he save the job. this would be limitation.
Regards,
Sanjeev

2 custom events getting triggered on user status change

Hi all,
In IQS21 transaction, once a user changes the user status I need to send a work item to the superior.So for this I have delegated
the business object BUS7051 to ZBUS7051. I have created 2 custom events HOD and APP.
I have even configured all the settings in BSVZ.
There are 3 user statuses 1.Created 2.HOD 3 .APP
Once user changes the status from Created to HOD a work item(notification in change mode) should go to the superior and similarly from HOD to APP also.
The problem is when I change status from Created to HOD,APP event is also getting triggered along with HOD.
Please tell me where I am wrong.
Refards,
Nishant

Nishant,
The APP event is used for Display the notification right? The two events are triggered for the same process. So the two events are linked with same process. Have you done anything in SWEC?
Thanks.

User Status Change Log for WBS Element

Hi All,
I have a requirement to capture the user and time when the user status has changed for WBS Element in TCODE CJ20N.
How do I enhance the standard table to add these 2 fields and also which enhancement is used to populate these fields?
Thanks
David

hi david,
if your looking for status changes in WBS for CJ20N tcode then
have changes documents tick marked in OPSA tcode for a particular project profile and then create project in CJ20N with that project profile and go to that respective WBS and click the blue icon and goto
Extras->changedocuments->All---> here click on all changes or history ... here this should give you required data your looking for ...
regards
pushpa

STOP WITH AUTO STATUS CHANGE!!!!!!!!!!!!!

I'VE HAD IT WITH THIS AUTO STATUS CHANGE
at 3 in the morning skype starts wailing because of a incoming call. cus apparently some retard at skype thinks auto status change is the thing that is usefull and helpfull.
well its the middle of winter everybody in the hosue woke up because the desktop was getting an incomming call.
so i had to get up with the heat turned down to change the status back to busy.
there is a reason i change the status to busy/do not distrub.
do you know what i did to me. i got a migraine. you try and get woken up in the middle of the nigth by a extrrmely loud skype incomming call. have to get out of bed. in the ocld.
well i am suspectibel to migraine. so thats to you i got a migraine.
i dont care about your community guidelines so dont go changing my message.
on top of that as i got up to deal with your program. i just end the call. and changed status from away to buys.
focourse the person seeing it is now mad at me for ignorign/ not picking up or having the decency to say sorry cant talk now.
YUOU KNOW WHAT I WONT CONFORM TO YOUR GUIDELINES CUS SKYPE DOES NOT CONFORM TO MY STATUS CHANGE
1 more statuschange and then im done with skype forever
bakc in the day this did not happen.
but all of the sudden with all these advancememnts in computers,. ya'll cnat doe this anymore
Edited to conform with the Community Guidelines

Now that is authentically the post of someone who is awake at 3am and doesn't want to be. I sympathise, but it will probably need the attention of a moderator.
This is an example of the software just not doing what it is told. From Eight Golden Rules -
7. Support internal locus of control.
Experienced users strongly desire the sense that they are in charge of the interface and that the interface responds to their actions. They don’t want surprises or changes in familiar behavior, and they are annoyed by tedious data-entry sequences, difficulty in obtaining necessary information, and inability to produce their desired result.
Sean Ellis - uses Skype chat for serious work
Click here to read my blog post on Skype 7 and basic principles of GUI design

WBS user status change doesn't trigger changed by update...

Hi all,
I've inherited a program that is used to programmatically change the system and user status of WBS elements. The user has reported an issue where the Change By and Changed On values displayed on the Admin tab of tcode CJ20N are not updated after the user status for a specific WBS has been programmatically updated. The system status update works fine...both fields on the admin tab are updated. I searched the forum and couldn't find anything that speaks specifically to this problem...does anyone have any thoughts?
Thanks in advance.

Yeah, that makes sense.
I'm thinking now that if I create a new version in the web gallery and crop it just for the web export the app will probably re-send that image out to the web site because it treats the new version as a different image. Since the new version really doesn't take up any meaningful hard drive space this wouldn't be a deal-breaker, but I would have to remember to NOT delete that version or change the crop ratio before uploading the gallery again.

2LIS_11_VAITM delta with user status change (JEST, JCDS)

Similar Messages

Maybe you are looking for