2LIS_11_VASTH does not capture delta although VBUK changes

I need the billing status field VBUK-FKSTK to get 'Non-invoiced' orders. The billing status is populated by delivery document number and not by sales order number. I have activated 2LIS_11_VASTH datasource and also did the initial set up in Dev environment. I replicated the datasource and have a DSO built on top to stage the data.
We have Sales Orders Item 2LIS_11_VAITM, Sales Orders Schedule Line 2LIS_11_VASCL and Deliveries Item 2LIS_12_VCITM extractors that are active and are staged in separate DSOs in BW
A few sales orders and their corresponding delivery documents were created. I scheduled the deltas through 'Job Control' in LBWE. When I extract data into BW I am able to see the sales orders and delivery documents created in ERP system.
I DO NOT see the new delivery documents flowing into BW through 2LIS_11_VASTH. But the source table VBUK has these delivery document numbers. I tried scheduling the deltas multiple times, but there is no change.
Any clues why the changes in VBUK do not show up in 2LIS_11_VASTH?
Thanks

Hi,
This datasource is for SD Order Header Status but it still contains few fields for delivery status as well.
Field in extract. struct.          Description of field                                Table of origin          Table field
LFGSK                                Overall delivery status of all items           VBUK                        LFGSK
LFSTK                                 Delivery status                                         VBUK                        LFSTK
If you need further information from delivery, then you should go for 2LIS_11_V_SSL SD Sales: Order Delivery

Similar Messages

Fm11 does not have the buttons to change from XML to WYSIWYG views

Hi, my Fm11 does not have the buttons to change from XML to WYSIWYG views. It only has the WYSIWYG view, and it does not have the Structure Tools,DITA, S1000D menu options.
In File>New, there is not XML option neither…. What am I doing wrong? Thanks

Hi Arnis, Thank you very much for your help, that was it !!! Greetings from Mexico

My airport express seems to be broken -- light is yellow and does not flash and doesn't change even when I press the "reset". Tried unplugging and reset -- still a solid yellow.

AX light is yellow and does not flash and doesn't change even when I press the "reset". Tried unplugging and reset -- still a solid yellow. I assume this is a goner?

Unfortunately, based on your description, I would have to second that your Express is a "goner." However, before giving up on the unit, be sure that you attempt a "factory default" reset at least 3x just to be sure.

System does not allow to me to change collect method in RZ20

Hi.
I Have the problem with my SAP R/3.
I have productive, based on 4 application servers. In RZ20, alerts of MTE Operating System for one application server is not work. In nodes properties I have collect method "CCMS_Cpu_Collect_c". On other application servers - "CCMS_OS_Collect". System does not allow to me to change collect method
What will I do? Please help me.
Edited by: Viktor Unsub on Jul 18, 2008 4:55 PM

Hello Victor,
the data collection method CCMS_OS_COLLECT is an ABAP report as you can see in the method overview in rz21. This report is used to collect the operating system data and send it to the CCMS.
As soon as you install the sapccm4x agent on an instance the agent will take over the data collection for the operating system subtree (this is also described in [note 522453 |http://service.sap.com/sap/support/notes/522453]. Important: point 4. of the note!). I.e. as soon as the agent is responsible for the data collection you will see the mentioned CCMS_Cpu_Collect_c.
If the MTE doesn't display data you should check if the agent is running.
Regards, Michael

SFW5 (BF) does not show me Check / Activate Changes button in ECC 6 EHP4

Hello All,
i am facing a strange problem, i want to activate business Function 'HCM, Core Processes in Talent Management' (BF name 'HCM_TMC_CI_1') in ECC6 EH4 IDES system. I also have SAP enterprise SearchTREX installed and this component shows me dependency in green light in SFW5 tcode (that means all the pre-requisites are fullfilled).
But in SFW5 tcode does not show me Check / Activate Changes button on the top bar, and if i see in menus its greyed out i am not able to activate the same.
I tried to unlock client using tcode SE06 and SCC4 but nothign worked out.
I even checked the authorization of user it has sap_all, SAP_new, IDES_IDA_SUP, IDES_SWITCH, R3_TRUSTED.
I will appreciate any help on the same.
We developed system from Homogenious Export Image provided by SAP to us.
Mani

Hello Mani,
You have to check for the compitability and dependency of already activated Enterprise Extension. If an incompatible Extension set is activated than it wont allow other application to work. Please check and let me know if you require anymore information.
Regards,
Vinit Pagaria

I am trying to manage my "Location Services" on my iTouch but the device does not allow me to make changes. The screen is muted indicating that changes cannot be made. Anyone experience something similar?

I am trying to manage my "Location Services" on my iTouch but the device does not allow me to make changes. The screen is grayed-out indicating that changes cannot be made. Anyone experience something similar?

Do you have any Restictions set? (Settings>General>Restrictions)

Related Content does not display on the name change page

Hi all,
Currently, i am doing some research for the related content. I find that delivery configuration has been on the Name Change component (self service). Then I do the security configuration but the related content option does not display on the name change component. No idea which step next i should take.
Please advise.
Any reference or docs is also welcomed.
Dennis

Hi,
What do you mean by my two nodes are all local.
Are you trying to use Related Content within one environment?
Make sure you have an authentication domain set on your webprofile and that your hosts file reflects this.
Make sure there is no proxy or firewall in the way.
Make sure Integration Broker is setup correctly.
Try pinging your server including the authentication domain.
Try looking for log files in the application server and errorLog.html in the Webserv folder.

I'm from Brazil, I have an iphone 3gs that does not turn over, would you change in any app store or any authorized?I'm from Brazil, I have an iphone 3gs that does not turn over, would you change in any app store or any authorized?

I'm from Brazil, I have an iphone 3gs that does not turn over, would you change in any app store or any authorized?

Have a look at your service options here: Apple - Support - Service Answer Center
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service Fee listed below.
iPhone Model
Out-of-Warranty Service
iPhone 5
R$ 649
iPhone 4S
R$ 549
iPhone 4, iPhone 3GS,
iPhone 3G
R$ 449
Prices applicable for Sao Paulo. Prices may vary by state due to local ICMS tax. All fees are in Brazilian reais and include tax.
Since your phone is out of warranty, you'll have to pay for your device being replaced.

0co_pc_01 does not supoort delta?

We use BI 7.0 SP 9.
When I extract data trough 0co_pc_01, info package shows only full update mode.
0co_pc_01 does not support delta?

You can check the properties of a datasource in table ROOSOURCE - input required is the datasource and the version - for this datasource the Delta field is blank in this table. This means that this datasource does not support delta.
regards,
Pinaki

Shared Variable does not update when typedef is changed

I have a shared variable of type custom control (typedef made up of a cluster). When I chang the typedef, e.g. the name or type of one of the fields in the cluster, and then save it, the shared variable does not update to reflect this change. That is, if I place the shared variable on my block diagram and do a "UNBUNDLE BY NAME" on the output, I see the old fields. I have to go back to the properties of the shared variable, change its data type, apply it, then go back and change it back to my custom control.
Anyone else seen this behaviour? Anyone know how to get the shared variable to update without going through this procedure?
Bill
“A child of five could understand this. Send someone to fetch a child of five.”
― Groucho Marx

I guess I should have included this information:
LabVIEW 8.2.1 using Project Explorer.
“A child of five could understand this. Send someone to fetch a child of five.”
― Groucho Marx

I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

Hi ..
Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Back to Safari. Press Command + Option + E to empty the Safari cache.
Quit and relaunch Safari, try a video.

Billing document does not capturing basic amt. capture only duty part

Hi
while doing billing on customer
the billing document does not capturing the basic amt on , it only capture only duty part.
pl suggest , how resolve the prob.
Regard
R.Sharma

HI,
Check the pricing procedure, in that remove the statistic for the pricing condition then try,
i think will resolve the issue, pricing should not activate the statistic
Thanks & Regards
Rajasekhar

Desktop 4.1.4 does not show calendar event after changing category

Palm Desktop 4.1.4 does not show (properly) a calendar event after changing its category and does not allow me editing it (on PC).
The event is seen as "grayed" region (no boarder and no 3D elevation shadow) although with different colors reminding the category ones.
Synchronization with my Tungsten E goes normally: I can see the event on the handheld, edit it, etc.
I use Win XP Pro 5.1.2600 SP3 build 2600 installed on Lenovo X61S (x86 based).
Thanks for any help.
Post relates to: Tungsten E

Make sure Category is set to all. Also try switching to a different category view then back to all.
Post relates to: None

Album view does not render correctly after synced changes

I was correcting the album rendering of some soundtrack albums today and noticed that albums do not group correctly across computers when the metadata is synced using Match. I am hoping someone can confirm they get the same results and possibly offer a fix.
Problem
Forcing a compilation album to render as a single album instead of multiple albums by setting the "Album Artist" and "Part of Compilation" fields does not sync across computers despite the fact that all of the relevant metadata syncs correctly.
Setup
Laptop and Desktop sitting next to each other. Both running Windows 8.1 and iTunes 11.1.3.8 logged into the same iTunes account for all services. (I am curious about running the experiment on all Macs or cross-platform, but all I have are PCs.)
Experiment
Step 1- Pick an album with various artists such as a soundtrack and confirm that it renders as one complete album in "Album" view in iTunes on both computers.
Step 2- Using the desktop, select all songs on the album and change the "Album Artist" field to be blank on all of them by selecting that field and removing the text in that field. Also set "Part of Compilation" on the "Options" tab to "No". Click OK and the album should be rendered as multiple albums for each track on the soundtrack. It is easiest to see this by staying in "Album" view and searching for the album name in the search tool in the upper right corner of iTunes.
Step 3- Go to the laptop and search for the album name in the "Album" view. It will still be rendered as 1 album instead of multiple albums for each track as it is on the desktop. Click on any song on the album and confirm that the "Album Artist" field is blank and "Part of Compilation" is clear (the metadata should sync within a few seconds). With these settings, the album should render as multiple tracks- not a single album. Closing and re-opening iTunes, updating Match or updating Genius does not re-render the album view as separate albums.
Step 4- Using the laptop, set the "Album Artist" field back to "Various Artists". The desktop will get that update, but not re-render the album as single album. The only way to "fix" the desktop is to reset the "Album Artist" field to "Various Artists" from the desktop.
My Conclusion
iTunes renders album views only when a change is made that would result in a change to the view and that rendering is only stored locally. iTunes does not correctly update album rendering when new meta-data that should cause a change in the view is received via Match. This is a problem because you cannot fix an album rendering on one computer and have that correction sync to your other computers. You have to "fix" the view on each computer individually.
Possible Workaround
Turn off iTunes Match and remove the iTunes database and all music on all computers but one. Using the one computer, make all required fixes and then recreate the iTunes database using Match on each of the other computers.
Any help or comments is much appreciated.
-rd

I have the same problem with PDFs created in Illustrator CS3. The bitmaps inside the PDF get rendered wrongly -- inverted or decolored.
One fix is to use ZIP instead of JPEG for the compression method when saving the file as an Adobe PDF.
I think it is a bug in Preview 5 (already filed it with Apple). With Preview 4.2 (Leopard) or using Acrobat 8.1.3, the PDF renders fine.

Music app does not have the function to change the audio source.

I use to change my audio source in my music app with the icon that looks like a triangle going into a rectangle i think it is call airplay, but it not there any more and what it is weir is that others app does have it so if i change my audio source in a video online it will change it in my music too..... Well i hope i could explain my self clear enough. Just put the airplay icon back in the music app. Thanks for your attention.
Best regards
Roger

iTunes Radio is currently only available in the US - if you are in the US then try logging out and back into your account via Settings > iTunes & App Store, and if that doesn't fix it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

2LIS_11_VASTH does not capture delta although VBUK changes

Similar Messages

Maybe you are looking for