2LIS_12_VCITM populates the same Shipping Point and Receiving Plant

Hi Gurus,
We are using 2LIS_12_VCITM extractor which answers all delivery-related requirements. However when I checked the data in RSA3, Shipping Point and Receiving Plant are the same. So I checked some sample deliveries in table LIKP and it shows the correct shipping point and receiving plant (which are different to each other). I checked VL03N and table LIKP is giving the correct shipping points and receiving plants. Receiving Plant or LIKP-WERKS and Shipping Point or LIKP-VSTEL. My question is how this happened? Consequently, when I initialized in BW, shipping point and receiving plants are the same which should not be.
Thanks for all the help.

The data for the 2LIS_12_VCITM is not just sourced by LIKP (Delivery Header), but by LIPS (Delivery Item) too.
Plant, in this extractor, is sourced by LIPS-WERKS instead of LIKP-WERKS. The receiving plant is LIPS-UMWRK. If you require this data, you will have to enhance the structure and create the User Exit code in tcode CMOD to extract that particular data.

Similar Messages

  • Assignment transportation zone at the same shipping point

    Hi Experts
    How can I affect several transport zones at the same shipping point (OVL7)?
    Thanks
    Hachim

    Hi Hachim,
    The transportation zone has to be unique: It is the starting point assigned to the shipping point.
    Why do you believe you need several transportation zones?
    Regards,
    Franck

  • Multiple Message Mapping with same Idoc, Sender and Receiver

    Hi,
    We have one Interface sending INVOIC02 Idoc from SAP R3 4.6C to SAP R3 4.6C through XI 3.0.
    On Inbound side we are using SAP standard configuring one Partner Profile with inbound INVOIC MM process code INVL.
    In customizing, we have defined one invoic type for the EDI partner.
    Now we have to integrate another type of inbound invoic, but in customizing it's not possible to assign more than one invoic type to the same Partner EDI.
    So, we have a restriction in SAP 4.6C inbound standard. On the other hand, we can't desing two Integration Scenarios in XI 3.0 with the same idoc INVOIC02, for the same sender service and receiver service because Integration Directory doesn't allow to create two interface determination for them.
    We are thinking on using header mapping in XI (receiver agreement to avoid use the same EDI partner profile for the inbound invoic, but we can't assign the same client and technical system with the same ALE Logical System in SLD for two different business systems.
    Does anybody have any solution for this problem, SAP side or XI side?.
    Thank you
    Best regards
    Luis

    Hi!
    In XI configuration  - interface determination, you can specify more than one Inbound interface. If you identify more than one, you get a new column where you specify condition (xpath) for selecting between the different inbound interfaces.
    In 4.6c, you can have more than one inbound invoic for the same EDI partner profile, if you separate between them using message function. Just add a new inbound parameter with a different message function, or copy the one you have and specify another message function, i,e. "DIFF".
    Hope this helps.
    Regards,
    Oeystein

  • My wife and I share the same email address and Apple ID.  We are not able to send and receive Text Messages to one another.

    My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another. Is the cause of this because we share the same Apple ID? Will we have to set up 2 separate primary email addresses to be able to  send and receive Tex Messages to one another? Like I said, we share the same email address and woul like to keep it that way to keep up with our email together. Is there a way to by-pass having to set up 2 primary emaill addresses if this is the problem?
    Thanks.

    go to the settings and turn off imessage
    but that don't change the issue that you will never be able to facetime eachtoher
    the appleID is really meant as the handle that identify you it was not meant to be shared
    but can see that people may want to do not buy apps more then once

  • When I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router

    when I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router.
    Below is some info i get about ports.
    I tried to set DMZ on my main router to have full access to ported to access point upstair which is in the ip of 192.168.1.2 and the main router in the living room is the gateway router with the 192.168.1.1 ip.
    I still cant see apple tv after i try the DMZ method.
    any suggestion ?
    These network ports are used by Apple TV for communications on your network.
    TCP port 123 is used to communicate with a network time server.
    TCP port 3689 is used to communicate with iTunes while using the iTunes Library Sharing feature.
    UDP port 5353 is used by Apple TV for automatically finding computers with iTunes on your network using Bonjour.
    TCP port 80 is used for communicating with podcast servers.
    TCP port 80 and 443 are used for basic and secure communications with the iTunes Store via the Internet.
    TCP port 53 is used for regular DNS.
    These are well-known ports used by Apple products, like iTunes. If you can use all the features of iTunes, these ports are likely already open on your firewall or NAT router. Note: These ports may also used by other services such as YouTube and Flickr.

    When the Apple TV is paired with a remote, it means only that remote can control it, when it's not paired any remote can control it. You will need a remote for each of your devices.

  • I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

    I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

    Who is your carrier?  Are you actually on 3G?
    Do you have 3G turned on or off?  Settings > General > Network > Enable 3G

  • HT1414 Why do I get 'This message has no content' with some e-mails on my iPad when the same messages can be received on my MacBook Pro without any problem, and how can I fix it?

    Why do I get - 'This message has no content' - with some e-mails on my iPad when the same messages can be received on my Mac Book Pro without any problem and how can I fix it?

    Is this a POP (POP3) email account?  If so, you MacBook Pro may be retrieving the email and deleting it off the server before your phone can.  Another possibility is that both your Mac and your phone are trying to retrieving it at the same time, and the POP server, which will only allow a single email client connection at a time, is locking out your phone resulting in the "has not been downloaded from the server" error.

  • Cannot send / receive emails. Information and settings both the same on phone and computer.

    iPhone stopped receiving/sending emails yesterday.  Information/settings the same on computer and phone. Phone says it 'Cannot Get Mail the user name or password is incorrect'.

    The upgrade to Mountain Lion in this case may have caused the Mail app to lose all of its Incoming Mail Server and Outgoing Mail Server (SMTP) settings in Mail>Preferences>Accounts.  This happened to me and others in this Forum.  You would need to contact your ISP to obtain the correct settings for these two servers and re-enter them in the above location.  I know, Apple slipped a bit on this one.
    Hope this helps

  • HT201412 I cannot activate my imessage and facetime and at the same time i cannot receive any notifications on my facebook.

    Hi.I noticed that my imessage and facetime is not working and at the same time i cannot receive any notifications on facebbok.

    Hi,
    To exclude software conflict, i recommend you to make a clean boot and then have a test.
    If this issue still persists, i suggest you re-built all COM ports through registry.
    Locate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\COM Name Arbiter, delete ComDB key, reboot your computer.
    Andy Altmann
    TechNet Community Support

  • How to get automatic plant and shipping point and storage location

    hi,
    sap gurus,
    how to get automatic plant and shipping point and storage location automatically into the sales order
    i have done all the config settings for that
    but its not appearing automatically.
    regards,
    balaji.t

    Hi
    Balaji...
    U can get the plant in sales order,  by doing the default the same in customer master or in  material master. In customer master -- sales are data--shipping tab delivering plant there u can assign and get the same in order for that customer. it is better to do in customer master rather than in material master.
    Shipping point is getting determine in sales order and u can not make it default like plant. Shipping point is determine in the basis of Shipping condition of customer ( ship to party)+ loading group of material + Deliverying plant there u have to assing the shipping point and it will flow in the sales order. Tcode OVL2
    For S loc u have to enter manually in the sales order u can not get it automatically.
    Hope this will help you.
    Thx.

  • Shipping point and shiptoparty

    hi,
    can u pls tell the differnce between the shipping point and shiptoparty and sold to party and unloading poing and loading point ......................
    tell me in ur won words
    regards
    Guur

    Hi,
    Shipping point : The physical location (for example, a warehouse or collection of loading ramps) from which you ship the item.
    Use
    You can predefine shipping/receiving points in the system, based on different combinations of
    plants
    shipping conditions
    loading groups
    During delivery processing, the shipping/receiving point is the most important criterion that you use to select deliveries.
    A delivery can be shipped from one shipping point only or received at one receiving point only.
    If you want to provide more detailed information about a shipping point you can specify a loading point (for example, one of a number of different loading ramps).
    Example
    If, for example, you want to ship refrigerated goods to a certain customer by rail, the system proposes a shipping point with a suitable location and equipment for loading refrigerated goods onto rail cars.
    Procedure
    The system can propose a shipping/receiving point. If valid alternatives are predefined in your system, you can change the shipping/receiving point manually.
    You can define a user-specific default value for the shipping point in the user parameter VST.
    Ship-to-party:
    i buy a gift for my friend online.
    i'll be the sol-to party for the website.
    My friend will be the ship-to party.
    Sold-To party : The partnewr to whom i sell some goods.
    Ship-to-party: The partner to whom i ship the goods.
    <b>Reward points</b>
    Regards

  • How are shipping point and delivery note connected ?

    I wanted to understand how is shipping point connected to process of creating delivery notes....can we configure sap using SPRO such that the delivery note creation happens automatically for certain shipping point once the order is created and saved ....and for certain shipping point the delivery note is not automatically created ( assuming we are using the same order type) but the determination of automatic DN creation is done by the value of the shipping points ??

    Actually what is shipping point?
    Shipping point is an independent org.unit which is linked to the plant and represent the point of departure or receipt of materials.
    Normally lot of shipping points are assigned to the plant.
    Relation:
                   Actually a delivery is created from a single shipping point only.. That is the reason when u complete the sales order, at the time of creating the delivery note, u are forced to enter the shipping point, without that the system willn't proceed further.
    Determination:
    It is determined with the formula of shipping conditions + loading grp + deliv. plant
    Answering to ur 2nd query,
    when u are creating the delivery from the sales order screen (by going to menu bar and click delivery), the system automatically assumes the shipping pt is from the sales order.
    But if u enter the different shipping point in delivery note creation, the system will thro an error that delivery split due to diff. shipping points.
    Hope i clarify ur queries, ur further queries are welcomable.
    Reward points if useful...
    regards
    Kaleeswaran

  • I downloaded the new 6 software. Me and my boyfriend share the same iTunes account and now every time I text him I also get a copy of the text sent to my from my number. How do I get that to stop?

    I downloaded the new 6 software. Me and my boyfriend share the same iTunes account and now every time I text him I also get a copy of the text sent to my from my number. How do I get that to stop?

    Go to settings > messages > send & receive
    check or uncheck the correct phones numbers and/or email addresses

  • HT5624 My husband and I share an Itunes account so use the same email address and password.  Our iphones are now connected and we get each other's messages and share each other's contacts.  How can we stop this happening?

    My husband and I share an Itunes account so use the same email address and password.  Our iphones are now connected and we get each other's messages and share each other's contacts.  How can we stop this happening?

    A couple of different approached:
    Create a second AppleID for one of you that includes the email address and phone number you wish to use for messaging, but do not apply it to the iTunes and app store (just keep the current one). My wife and I do this and it works quite well. Also allows for easier syncing of Contacts , notes etc. using icloud if you wish to do that.
    Add additional emails/phone numbers to the existing account and change the Send/Receive settings for Messages. this will not fix the Contcts isues for you however.

  • I bought a new iphone and as i was setting my apple ID account and i signed in to my account and confirmed two useres with diffrent numbers that were signed to the same apple ID and it messed up my i messege and face time. how do i fix that ?

    i bought a new iphone and as i was setting my apple ID account and i signed in to my account and confirmed two useres with diffrent numbers that were signed to the same apple ID and it messed up my i messege and face time. how do i fix that or delete one user ?

    Hello sapiii96,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    To sign out of your Apple ID
    Go to Settings > FaceTime, tap your Apple ID, and select Sign Out.
    Go to Settings > Messages > Send & Receive, tap your Apple ID, and select Sign Out.
    Best of luck,
    Mario

Maybe you are looking for

  • How can you get ios on your ipod 3

    how can i get ths on my ipod 3

  • I cant get my wireless or any internet to work with AOL

    I have a Motorola Modem and a Linksys router. I get my internet through Roadrunner but i access it through AOL, my Macbook says the Airport is connected to the internet but Safari wont allow me to open a webpage, it says the server stopped working. A

  • Number Range Object

    Hi During data extraction im getting the following error message "Error calling number range object ZMATNO for dimension D2" pls help me out.. how should i proceed from here... Thanks in advance, Sowdha.

  • How can I transfer android photos to iPhoto?

    How can I sync Samsung Fascinate/Galaxy S photos with iPhoto on my iMac? Thanks

  • Metalinks DOC IDs

    Hi, Can any one provide me the doc ids for upgrading oracle 9i database to 10g and oracle 10g database to oracle11g & oracle9i to oracle 11g metalink IDS. Thanks