2lis_13_vdkon

We are getting the following error when transporting to bi qlty.
Further I find the info objects 0KAPPL, 0KINAK, 0CONDRECNO, 0kstat, 0KINAK are missing in BI QAS system. Do we need to do activate KBETR, KNUMH, MWSK1 in R/3 as I find the standard data source is highlighted in BLUe and the appended fields are black in maintenance structure of lbwe
quote
=======
Activation of Objects with Type DataStore Object
     InfoObject 0KAPPL is not available in version A
     InfoObject 0KAPPL is not available in version A
     InfoObject 0KAPPL is not available in version A
     Checking Objects with Type DataStore Object
     Checking DataStore Object ZSD_O36
     InfoObject 0KAPPL is not available in version A
     Inconsistencies found while checking DataStore object ZSD_O36
     Saving Objects with Type DataStore Object
     Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Activation Mode)
     Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Activation Mode)
     InfoObject Condition is Used for Statistics ( 0KSTAT ) is not active, total of 3 inactive InfoObjects
     InfoObject Application ( 0KAPPL ) is not active
     InfoObject Condition Status (Active/Inactive) ( 0KINAK ) is not active
     InfoObject Condition is Used for Statistics ( 0KSTAT ) is not active
     Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
     Mapping between data source 2LIS_13_VDKON and source system QASCLNT900 is inconsistent
     InfoObj. 0KAPPL from fld KAPPL of dataSource 2LIS_13_VDKON is not active but BCT ex. -> Dtl
     Field KBETR will not be delivered from DataSource 2LIS_13_VDKON in source system QASCLNT900
     InfoObj. 0KINAK from fld KINAK of dataSource 2LIS_13_VDKON is not active but BCT ex. -> Dtl
     Field KNUMH will not be delivered from DataSource 2LIS_13_VDKON in source system QASCLNT900
     InfoObj. 0CONDRECNO from fld KNTYP of dataSource 2LIS_13_VDKON is not active but BCT ex. -> Dtl
     Field KNUMV will not be delivered from DataSource 2LIS_13_VDKON in source system QASCLNT900
     InfoObj. 0KSTAT from fld KSTAT of dataSource 2LIS_13_VDKON is not active but BCT ex. -> Dtl
     Field MWSK1 will not be delivered from DataSource 2LIS_13_VDKON in source system QASCLNT900
     Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
     Reference to transfer structure 2LIS_13_VDKON_RA not available. No activation possible.
     Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
     No rule exists
     Source RSDS 2LIS_13_VDKON QASCLNT900 does not exist
     Target RSDS 2LIS_13_VDKON QASCLNT900 does not exist
     Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Delete Mode)
     Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
     Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
     Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
     Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
     Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Delete Mode)
     Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Delete Mode)
     Errors occurred during post-handling RS_AFTER_IMPORT for IOBJ L
     RS_AFTER_IMPORT belongs to package RS
     The errors affect the following components:
        BW-WHM (Warehouse Management)
     Post-import method RS_AFTER_IMPORT completed for IOBJ L, date and time: 20090310171850
     Post-import methods of change/transport request RBDK906162 completed
          Start of subsequent processing ... 20090310171841
          End of subsequent processing... 20090310171850

Hi,
First u replicate the datasource in quality bw from quality r/3 ,then in error which r the objects are not active ,install those objects in dev bw and first collect those objects then u can transport these datasource.
Thanks & Regards
sathish

Similar Messages

Not able to see PSA for the data souce 2lis_13_vdkon after enhaning

Dear Experts,
I have enhanced the extract structure of 2lis_13_vdkon in R/3 with 5 fields which are exist in transfer structure.
I have replicated the data source in BI but unfortunately i have not deleted the data in the PSA.
After replication when i try to activate the data source the system is giving Dump and im not able to see the PSA also.
Please help me out.
When i manage on the data source to c PSA, its giving error like this
Invalid DataStore object name 2LIS_13_VDKON_BB: Reason: No valid entry in table RSTS
The Dump when activating the data source is :
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Exception CX_SY_OPEN_SQL_DB
Date and Time 03.06.2009 09:46:55
How to correct the error
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB"
"CL_RSAR_PSA===================CP" or "CL_RSAR_PSA===================CM006"
"_UPDATE_DIRECTORY_TABLES"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
Regards
venu

Hi Venu,
The issue I think is the PSA was not deleted cleanly. If you try and activate the PSA you will get the dump again.
..Probably if you go through the ABAP dump you will notice it is pointing to the following code;-
   75 * Put the fields of PSA to database without check, otherwise error by
   76 * activation of table
   77
   78   IF p_psa_exists EQ rs_c_false OR
   79      i_new_version     EQ rs_c_true.
>>>>>     INSERT rstsodsfield FROM TABLE l_t_odsfield.
   81   ELSE.
   82     DELETE FROM rstsodsfield
   83       WHERE odsname = l_s_odsfield-odsname
   84       AND version = l_s_odsfield-version.
   85     MODIFY rstsodsfield FROM TABLE l_t_odsfield.
Put a breakpoint in the code in line 78. and activate the DS..the program should stop in 78...change the value of variable rc_c_false so that line 82 gets executed. This will clean up the PSA entries in table rstsodsfield. Now activate the DS and delete the PSA entries in the PSA table.
We faced the same issue and resolved it this way.
Thanks
-Saif

Error to transport request when activate the Data Source: 2LIS_13_VDKON

Hi people,
When I try to transport the request about my activation from Standard DataSource 2LIS_13_VDKON, the systen (in ECC6) show me a error:
" 8: Transport carried out with errors.
Individual objects could not be transported successfully"
I already entered in the transaction RSO2 and obseved that the structure is activated.
Coulld you help me?
Thanks.

Hi Anup,
It is correct..
We didn´t do any enhancement.
But here, the Client´s are closed for the changes and we only do this in the Development Client (only that is opned) to transport it later to other Client (example: Quality Client or Production Client).
And the problem occurs exatly at the moment we liberate from Development Client to other Client.
Thanks,
Rosana.

Problem in running Delta load for 2LIS_13_VDKON

Hi Friends,
I am working on LO Data Source i.e., 2LIS_13_VDKON, i have run the INIT setup tables through OLI9BW. There were 2389443 records.
Now, since in BW these records multiply depending on condition types I didn't want unnecessary records. So I have run multiple INITs in BW with selection criterias as I wanted data only from 01-Jan-10. Having done that, now I want to run deltas but the BW system is not letting me do. If I click on Delta in the infopackage (in update rule) then it selection criteria it adds up all those INIT selection criteria that I have run and I can't change it (as in it becomes non-updatable); why is it adding up all those selection criteria in Delta infopackage?
I want to fetch all deltas from the day I ran OLI9BW...How to run delta for those records updated after run of OLI9BW.
Thanks!

Hi,
Follow the steps, these steps are for SD module, but for your datasource, change the Tcode to fill setup tables and replace the SD DataSource with your datasource in the following steps.
1. First Install the DataSOurce in RSA5 and see it in RSA6 and activate in LBWE.
Before doing the steps from 2 to 6 lock the ECC System, i.e. no transaction will happen
2. Then delete the Queues in LBWQ like below
     MCEX11 --> For 2LIS_11_*
     MCEX12 --> For 2LIS_12_*
     MCEX13 --> For 2LIS_13_*
Be carefull while doing all these deleations in Production Servers
3. Then delete if any entry is there in RSA7
     Eg:
     2LIS_11_*
     2LIS_12_*
     2LIS_13_*
4. Then delete setp tables using LBWG Tocde and select Application Number. i.e. 11, 12 and 13.
5. Then Load Setup Tables using OLI7BW, OLI8BW and OLI9BW.
   Give Name of run = XYZ, Termination Date = tomorrows date and execute it in background.
   i.e. Program-->Execute in Background.
   2LIS_11_* Use OLI7BW Tcode to fill the Setup tables
   2LIS_12_* Use OLI8BW Tcode to fill the Setup tables
   2LIS_13_* Use OLI9BW Tcode to fill the Setup tables
At the time of setup table filling no entry will exists in LBWQ in ECC for the following Queues.
     MCEX11 --> For 2LIS_11_*
     MCEX12 --> For 2LIS_12_*
     MCEX13 --> For 2LIS_13_*
6. Check the job status in SM37 and once finish it then goto RSA3 and then execute it and check.
7. Then Replicate the DataSource in BW.
8. Install InfoCube/DSO from Business Content or cretae InfoCube/DSO and then Map the ECC DataSOurce Fields and BW          InfoObejcts in Transfer Rules (in BW 3.5) or in Transfermations (in BI 7.0).
9. Map the InfoObejcts in InfoSource and InfoObejects in InfoCube/DSO in in Update Rules (in BW 3.5) or in Transfermations
   (in BI 7.0).
10.Create InfoPackage and Load Init/Full.
11.Using DTP you can load to InfoCube/DSO (if it is BI 7.0)
Thanks
Reddy

2LIS_13_VDKON doesn´t work

Hi gurus!!!
I have a problem regarding 2lis_13_vdkon datasource... this one doesnt extract data to BW... The tables have a lot of data... somebody can helpme, please..!!! I have looked for OSS NOTEs but I found nothing.
Thanks a lot
BR

Hi,
Follow the steps, these steps are for SD module, but for your datasource, change the Tcode to fill setup tables and replace the SD DataSource with your datasource in the following steps.
1. First Install the DataSOurce in RSA5 and see it in RSA6 and activate in LBWE.
Before doing the steps from 2 to 6 lock the ECC System, i.e. no transaction will happen
2. Then delete the Queues in LBWQ like below
     MCEX11 --> For 2LIS_11_*
     MCEX12 --> For 2LIS_12_*
     MCEX13 --> For 2LIS_13_*
Be carefull while doing all these deleations in Production Servers
3. Then delete if any entry is there in RSA7
     Eg:
     2LIS_11_*
     2LIS_12_*
     2LIS_13_*
4. Then delete setp tables using LBWG Tocde and select Application Number. i.e. 11, 12 and 13.
5. Then Load Setup Tables using OLI7BW, OLI8BW and OLI9BW.
   Give Name of run = XYZ, Termination Date = tomorrows date and execute it in background.
   i.e. Program-->Execute in Background.
   2LIS_11_* Use OLI7BW Tcode to fill the Setup tables
   2LIS_12_* Use OLI8BW Tcode to fill the Setup tables
   2LIS_13_* Use OLI9BW Tcode to fill the Setup tables
At the time of setup table filling no entry will exists in LBWQ in ECC for the following Queues.
     MCEX11 --> For 2LIS_11_*
     MCEX12 --> For 2LIS_12_*
     MCEX13 --> For 2LIS_13_*
6. Check the job status in SM37 and once finish it then goto RSA3 and then execute it and check.
7. Then Replicate the DataSource in BW.
8. Install InfoCube/DSO from Business Content or cretae InfoCube/DSO and then Map the ECC DataSOurce Fields and BW          InfoObejcts in Transfer Rules (in BW 3.5) or in Transfermations (in BI 7.0).
9. Map the InfoObejcts in InfoSource and InfoObejects in InfoCube/DSO in in Update Rules (in BW 3.5) or in Transfermations
   (in BI 7.0).
10.Create InfoPackage and Load Init/Full.
11.Using DTP you can load to InfoCube/DSO (if it is BI 7.0)
Thanks
Reddy

2LIS_13_VDKON 0 records

I am getting 0 records from 2LIS_13_VDKON . I have initialized the structure for type 13. I ran the Perform Setup - SD Billing Documents. When I look at the log there are no entries. In LBWE the lights are green. What am I missing?

Hi,
Make sure that The activation of the ES,Filling setup table and RSA3 checking are being done in the same client (which is used in the source system creation).If there are multiple clients in R/3 you may get chance to do different activities at different clients by mistake.
With Rgds,
Anil Kumar Sharma .P

Info provider not found for 2LIS_13_VDKON

Hi,
We are using 2LIS_13_VDKON data source for Billing Conditions ( Plug in 2004.1).
Am unable to find the Info Provider for this data source /info source at 3.3 content. ( Unless my selections were incorrect).
Shall you please kindly help me if this info source is already in use.
Our extraction was strcuked at PSA level because of No data target it looks like we need to built custom ODS/Cube.
Thanks for earliest reply.
kind regards
martin

found in 3.5 content.
Cheers
martin

Error while installing BI Content-2lis_13_vdkon

Hi, Guru's
i have instaled the infosource (2LIS_13_VDKON) (BI 7).Now when i try to assign the respective Datasource to the above Infosource,i get a error messg stating : The Transfer Structure is not getting generated.so i tried again to install the DS from business content and here i get a messg:( Data element for InfoObject VBELN 0BILL_NUM could not be created).
any inputs would be appreciated.
thanks
mohan
(would assign points for sure)

Hi Mohan,
Go by the below procedure.
Step-1. Go to transaction RSA-6 and check weather your data source is Active or not.If it is active that is fine otherwise activate it in RSA5.
Step-2. Goto your BW System and replicate the data source and assign the respective infosource.
Step-3. Now Create Transfer rules then update rules for your respective target.
Step-4. Schedule an Infopackage to pull the data to the target.
Hope this helps
Regards,
Karthik.
mail me at: [email protected]
Assign points if helpful

Missing Codition Types at 2LIS_13_VDKON data source in RSA3 Tcode.

Dear All,
i am getting problam with 2LIS_13_VDKON data source in RSA3 Tcode.
When i am checking it, some condition types are missing.
i checked it condition types are active also.
and reloaded setup table.
Still same problam is coming .
please provide me your inputs.
Regards
SSMS

hello
How did you solve your problem. I m getting exactly same issue where some cond types (active) are missing.

Unable to init 2lis_13_vdkon: ODS -0SD_O06

HI ALL,
Some one delete my inti reqest from PSA, now again iam going to init the datasoruce 2lis_13_vdkon to the data targate 0sd_o06, i am unable to init the request. the message is
REQU_DZ0WL1FTY70FU2NUS5LNPHVV before running init again with same selection,
i am check my reqest at sm37 their is also i am not found the reqest.
what is the neccessary step i am taking to init the datasoruce 2lis_13_vdkon
thanks in advance
Regards
sangram

Hi All,
i search at scheduler inbackground processings sufi/prifix there no request i am found the box is blank.
THEN I AM GOING TO START AGAIN INIT THE MESSAGE IS
Delete init. request
REQU_DZ0WL1FTY70FU2NUS5LNPHVVU before running
init. again with same selection
I AM Unable to again init for 2lis_13_vdkon
Regards
sangram

2LIS_13_VDKON (feel like new post)

Hi All,
Unfortunately I have deleted the InfoSource 2LIS_13_VDKON from AWB when we were not using that.
Now When I am trying to assin 2LIS_13_VDKON datasource... system is not suggesting infosource 2LIS_13_VDKON from Content.. rather it is suggesting Application Praposal.
And I am not able to find any Update Rules.. DataTarget (0SD_O06).. InfoSource.. in the Business Content.
We r using Plug-in 2004_1_620. BI content 3.3.
Regards,
AA D
Message was edited by: AA D

Hi AAD..
No need to Worry..
Again u can install from Business Content .
u will get that infosource.. and then Insatll Cube..
other Requrements..
if u dont know how to install i wil send the Screen
shots.. if need
Assign Points if UseFUL
cheers
Purushottam

Problems with Datasource 2LIS_13_VDITM and 2LIS_13_VDKON

Hello BWers!
After the implementation of the procedure "Filling in the Setup Table" of an application 13 (via transaction OLI9BW), realized that some documents billing can not be extracted through data-sources 2LIS_13_VDITM and 2LIS_13_VDKON.
Someone has idea that some billing documents are not processed in the "Filling in the Table Setup"?
PS: before executing the transaction OLI9BW, I have removed the "Setup Date" at transaction LBWG, I have cleaned the MCEX11 queue at transaction LBWQ and also "BW Delta Queue" at RSA7.
Thanks.

In addtion to what has been mentioned, what did you specified in the No. tolerated faulty documents, if you have specified any number, then instead of the setup actually gettting canceled for those faulty documents, it will skip it. Try to see if that is among the faulty documents, you could run a setup only for those missed documents.
thanks.
Wond

Query running very slow for 2LIS_13_VDKON Extractor.

Dear Experts
Having no Standard InfoCube to accommodate the data from 2LIS_13_VDKON Extractor, I've created an InfoCube having the Standard DSO inbetween. The Data Flow is as below:
2LIS_13_VDKON -> ZSD_DS17 (which is a copy of BCT DSO 0SD_O06) -> ZSD_C17 ---> ZSD_M02 (MultiProvider)
We went live last week and there are only 1252377 records in the InfoCube at the moment in Production. The BEx Query designed on top of the MultiProvider runs by default for the last 3 Months (Variable created) initially and the User will be able to look up only the last 13 Months (another Variable created) of data at any given point in time.
The User doesn't want any Selection Parameters on this Report and that's how it is created.
The problem now is.. this 'Margin on Agreed Cost' Report taking about 3 Minutes and 5 Seconds to run.
I have RSRV on the InfoCube and everything seems to be ok, tried Aggregates (though I understand that this number of records wouldn't need one to be created) and have also tried Query Cache today but no good.
Is there anything that I might have overlooked when designing the InfoCube and the BEx Query? Attached are the screenshots of the InfoCube, MultiProvider and the BEx Query for your reference.
Any suggestions are very much appreciated.
Thanks in advance for your time.
Chandu

Hi Anshu
Thanks for your time.
The link you've sent was very useful indeed.
I followed instructions from your link and below are the statistics 4 days after this Cube went into Production:
As you could see, the InfoCube design is very fine.
We have noticed that the Report runs within a few seconds when it is run by 0BILL_DATE in Selection Parameters. Therefore, we are trying to buy the End User to have some Selection Parameters so that the performance of the Report will improve.
I have already created Aggregates for this Cube but in vain!
Can anyone please send me the Screenshots of the InfoCube Design which captures all the fields of 2LIS_13_VDKON Extractor?
Thanks,
Chandu

2LIS_13_VDKON - PSA error

Hello dear BWers,
I am loading data from data source 2LIS_13_VDKON (Condition values) but get an error message from the PSA:
"Arithmetical errors or conversion errors found in routine ROUTINE_0001 record 98 RSAU 507"
I see nothing wrong in the mentioned record in the PSA. What is wrong? My load gets red...
Best regards,
Fredrik

Hi,
It is the problem with standard content's update rule of "Condition Rate"
So change the update rule of "Condition Rate" to :
IF( Billing Quantity SU <> 0, Condition Value / Billing Quantity SU, 0 )
You are getting the error if the record has Billing Quantity SU equal to ZERO.
With rgds,
Anil Kumar Sharma .P
Assign the points, if it is helping you.

First time delta process for 2lis_13_vdkon in bw 3.5?

Hi all,
Till now the data was loaded through setup tables, and there is no delta process being setup for 2lis_13_vdkon.
Can anyone let me know how to carry out the delta process, so that the daily updates runs in the system rather than updating through a full update.
Thanks
Pooja

Hi Pooja,
Once you delete the setup table, it deletes the data for all the DataSources for the application area. In your case 13 (sales).
Then, initialise the setup table. Make sure there is no transaction happening when the initialisation run is executed.
Once the initialisation is complete in R/3 side, run the initialisation InfoPackage for the DataSource.
Next load onwards, all the data will be stored in the delta queue in case of direct delta and in the update queue in ccase of queued delta. In any case you will get the delta data. You might have to create a new InfoPackage for delta.
Roy

2lis_13_vdkon

Similar Messages

Maybe you are looking for