2lis_18_i0item Datasoure - 0records in RSA3..

Hi
I fill the setup table for Application 18 (Notification - Items) and system gives a messge " 54 documents read successfully".Then i tried checking the Relevant setup table in SE16 ,but it shows 0 entries..I cant find any reason why the table's got no entries,even though the set up table filling is done fine!!!!( Checked the log(NPRT) but "No logs found" )...would highly appreciate ur help on this..
manythanks

Arun,
You need to give a name for the run and give a termination date in the future when populating the set up tables. I assume you have done this.
Coming to your question, did you check if the base table has got any records in it? If there are no records in the base table, then the relevant set up table will not be filled with any records. Also check if the extract structure is active in the LO cockpit.
Let me know if you run into any trouble.
Regards,
Deepthi.

Similar Messages

Problem during data extraction program (tran - RSA3) in SC system

Hi Experts,
We are extracting data from one of the data source (9ALS_SBC) through trans RSA3. We are using active version 000 for the same.
but, the transaction is showing error below:
Error when generating program
Message no. /SAPAPO/TSM141
Diagnosis
Generated programs are programs that are generated based on individual data objects, such as planning object structures, planniung areas and InfoCubes. These programs are then executed in the transaction. An error occurred during the generation of such a program.
There are two possible causes:
The template has been corrupted.
The object that the template uses to generate the program contains inconsistencies, for instnace an InfopCube has not been activated.
could someone tell me how to solve this error?
i hv corrected all the inconsistencies but still it is showing same error!
thanks in advance for this help!
with best rgds/
Jay

Dear Jay,
the error can have several reasons, it depends on your business scenario and system settings.
I send you some possible reasons and solutions:
1.
The problem can be that the technical datasource name has changed inside the planning area. The planning area has other extract structure assigned as the datasource.
This could have happened due to a planning area or datasource transport.
The best way to repair this is to create a dummy-datasource for the planning area with transaction /N/SAPAPO/SDP_EXTR. This will update the relevant tables with the new datasource structure.
Please check if the other datasources will work correctly as well. If not you may create similar dummy-datasources for the other aggregates as well.
Please do not forget to delete the dummy-datasources as well in /N/SAPAPO/SDP_EXTR.
2.
You can try to re-generate the data source at transaction /SAPAPO/SDP_EXTR and recheck the issue.
3.
Run /sapapo/ts_pstru_gen via transaction se38.
In the selection, enter the Planning Object Structure used and select 'Planning area extractor' and set the flags on the 2 bottom checkboxes 'Reset generation time stamp' and 'Generate'.
4.
Maybe the extract structure which is assigned to planning area doesn't exist in your system. This could happend at the time of transport.
Please refer to following content from note 549184:
=======================================================================
Q4: Why could I have extraction problem after transport of DataSource?
A4: DataSources for DP/SNP planning areas depend directly on the
structure of the planning areas. That's why the planning area MUST
ALWAYS be transported with or before the DataSource.
========================================================================
To solve this inconsistency please try the below:
-Please reactivate the datasoure on Planning Area.
And activate all active transfer structures for a source system with RS_TRANSTRU_ACTIVATE_ALL programme on se38 transaction.
I hope these proposals could solve the error.
Regards,
Tibor

Data loaded successfully in RSA3, but can not find data in BW PSA

Dear all:
We have custom datasource enhanced through BADI. For one column, in the source system RSA3, I can see this field populated with data, but in BW, when I load the data in PSA and check, this field is blank...
I tried seeral ways like re-replicate datasource, delete the datasource in BW and re-replicate, but not work.
Did anybody meet the same situation before? How to handle this issue?
Any post would be appreciated and thank you all in advance!
Tim

Hi Pavan:
Thanks for your reply.
I don't have any selection field for this datasource, and the number between ECC and BW matches. Actually the problem is only for one field, on ECC side RSA3, this field are populated with values, while in BW PSA, this column is there, but all the content are blank.
I do call one function module called to populate that field:
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
      EXPORTING
      CLASS                      = ''
        CLASSTEXT                  = 'X'
        CLASSTYPE                  = '023'
      CLINT                      = 0
        FEATURES                   = 'X'
        LANGUAGE                   = SY-LANGU
        OBJECT                     = W_OBJECT
        OBJECTTABLE                = 'MCH1'
        KEY_DATE                   = SY-DATUM
        INITIAL_CHARACT            = 'X'
      NO_VALUE_DESCRIPT          =
        CHANGE_SERVICE_CLF         = 'X'
      INHERITED_CHAR             = ' '
      CHANGE_NUMBER              = ' '
      TABLES
        T_CLASS                    = ITAB_CLASS
        T_OBJECTDATA               = ITAB_OBJECTDATA
      I_SEL_CHARACTERISTIC       =
      T_NO_AUTH_CHARACT          =
      EXCEPTIONS
        NO_CLASSIFICATION          = 1
        NO_CLASSTYPES              = 2
        INVALID_CLASS_TYPE         = 3
        OTHERS                     = 4
    IF ITAB_OBJECTDATA IS NOT INITIAL.
       READ TABLE ITAB_OBJECTDATA INTO wa_OBJECTDATA WITH KEY atnam = 'ZLOBM_PLNTMFG'.
       <LS_ESMI_BW_MD_ZBATC0001>-ZORIGPLNT = wa_OBJECTDATA-AUSP1.
    ENDIF.
The code is very simple, it just call the standard FM and fetch the value from the return table, is there any thing wrong with my code?
Thanks!
Tim

Can not get data in 2LIS_13_VDITM in R/3 - 0 posts in RSA3

Dear Collegues,
I have a big problem.
I have deleted the setup tables for 2LIS_13_VDITM and VDHDR to add a field to 2LIS_13_VDITM. I added the field PMATN througt LBWE (Maintenance).
Then I tried filling the setup table again using OLI7BW, spesifying a run name and a future time and date. A message stating Start of billing document processing appears. The Processing takes about 5 minutes, and I come back to the window where I specified the run name etc. A message at the bottom of the page states Datasource 2LIS_VDITM contains data still to be transferred. And when run the datasource in RSA3 there is still 0 records extracted.
How can I fetch my 2LIS_13_VDITM data?? Can this have anything to do with other clients? There is a client 700 in addition to the 100. Hope you can help, will sign points!
Regards Silje

Filling the set up tables for these application is not OLI7BW.
Please check in SBIW.
Khaja

Not getting the data for delta for 0ASSET_ATTR_TEXT in RSA3

Hi All
In RSA3, I am not able to extract the delta for the datasource ASSET_ATTR_TEXT. But when it is on full update then i am gettign the records, when i changed to "D" it is giving me the error 'Errors occurred during the extraction' and the error messege says
"Errors occurred during the extraction
Message no. RJ012
Diagnosis
During the extraction phase an error occurred for the extractor. An exception, 'error_passed_to_mess_handler' was triggered.
System Response
A more precise description of the error can be found in the log.
Procedure
Check the function module or the call from the extractor check program
Kindly provide some inputs on the same
Regards
Abhi

hi Siggi,
I have checked Datasource in the ROOSOURCE Table for this datasource the DELTA IS - AIE. And do did the Init from the BW i got 8210 recods.Then i executed the Delta Pack. there was an error happend.
But When i loaded Delta i got the error as :
Diagnosis
         Not all the initialization requests have been completed yet for this
    DataSource, or there may be an incorrect initialization request.
System response
No delta requests can be processed whilst there is an initialization
    request that has not been completed.
Procedure                                                     Wait until the initialization request has finished, or delete the entry
    for the incorrect initialization request from the corresponding display
    in the Scheduler.
Regards
Abhi

Enhanced 0MATERIAL_ATTR-Extractor: Data in R/3-RSA3 but not in BW-PSA

Hi,
we enhanced our 0MATERIAL_ATTR- DataSource with a "new" Z-field.
I checkt the DataSource with RSA3 and everything seemed to be fine (right data in Z-Field).
I loaded one record to BW and this new Z-Field is empty (I expected data!).
I allready:
- activated everything on BW
- deleted Source System Assignment and assigned it new
- Replicated the Data Source (twice)
- checked Transfer Rules
- checked the assignment of the z-field (Type is Ok, it is assigned)
- searced with google and in this forum.
Monitor shows green light on DataLoading (no errors)
ST22 shows no shortdump (BW and R/3)
System BW 3.5
Why can i see data on RSA3 and BW can´t load values for this new Z-Field?
Thanks in advance!
Greetings
Daniel
Btw: Yes, i assign points!

Hi,
Full Load: It was a full load for about 100 Materials. I cant start a full load without restriction, there are to many data...
To delete all MD: This is not possible!
BW 3.5.
I'll try to delete DS and rereplicate ist. ...
thanks.

RSA3 data in R/3 and PSA data in BI are different values for same Doc No.

Hello BI experts,
I have a weird situation in BI. RSA3 and PSA are not reconciled for same Doc no.
Data Source: 0FI_AR_4 (enhanced in user exit with some custom fields as well)
Extracting data using Infopakcage in BI as a Init load into PSA.
The values in RSA3 in R/3
Doc No           Amount
1400003125      714.29
The values in PSA in BI
Doc No           Amount
1400003125     581.56
Anyone come across this situation. Any help would be greatly appreciated.
Thanks much,
Anil

1. yes selections are same in RSA3 and in Infopackage
2. Yes pulling all data records in RSA3. Thats only record exits for that doc#
3. Its not a delta, we are pulling in RSA3 all records and Initial load to PSA.
Thanks much,
Anil

No data in RSA3 for 2lis_11_vaitm

hi,
I am testing the extractor 2lis_11_vaitm and there is no data in RSA3. i have checked the sales orders and there is data. please let me know what the problem may be.
Many thanks
Emil

Emil,
Here are the steps.
1) Use transaction LBWG to delete the contents of the setup table for application 11.
2) Use transaction OLI7BW to perform the statistical setup of sales documents (make sure to block all orders).
3) While setup job is running, use transaction SA38 to run progrm RMBWV311. This will move the V3 updates to the delta queue so as not to double up this data.
4) Now in RSA3, execute the 2LIS_11_VAITM datasource.
Abdul

No data in RSA3 for 2LIS_11_VAITM and 2LIS_11_VAHDR

hello experts,
i want to extract data from 2LIS_11_VAHDR and 2LIS_11_VAITM but dont see any data in RSA3.
I have already activated the datasource in RSA5 and LBWE. After running the setup tables using OLI7BW i still dont see any data in RSA3.
Pls advice... is there something i am missing?
thanks
Jagpreet

Use SE16 and verify that there is data in the MC11VA0HDRSETUP table. If there is no data, then your setup tables were not updated (or the setup extracted no records).
In RSA3, make sure you select Update Mode of "C" or "F". This will check data from the setup tables.
Hope this helps.

No Data for field in RSA3

Hi Experts,
I have a Business Content Datasource.
I have a field in EKBE table for which I have records in the table.
When I run RSA3 t-code, I do not see the records for that field.
I checked my extract structure enhancement and it looks fine.
Please let me know why I am not able to see the values

Hi,
First check whether you got any data in the relevant base tables for purchasing (eg EKKO, EKPO,EKBE etc) .
Fill with OLI3BW and then run the setup tables,look in SM37 to see your details job (and run-time duration...)
Once you have done some postings you may find some entries in the corresponding base tables.
Now try to check the data in extract checker rsa3.
Also pls chk these links .
Set up tables for 2LIS_02_* not getting filled
LO extraction: Filling Set up table
http://help.sap.com/saphelp_erp2005/helpdata/en/7c/f56241ceba7d47e10000000a1550b0/frameset.htm
Hope this helps,
Regards..
CSM Reddy

No data in S001 and RSA3 after set up for 2LIS_01_S001

Hi All,
I am using 2LIS_01_S001 datasource to pull data to customer cube 0SD_C01. This datasource is made active in R/3. I tried doing set up using OLI7,OLI8 and OLI9 transaction, but no data is getting updated to S001 table and hence no data in RSA3. Data are there in VBAK ,VBAP etc...
I dont have any clue why data is not coming to S001.
Parameters are set up in OMO1 transaction also.
We are in BI 7 and ECC 6.0.
Could you please share your thoughts on this.
Awaiting for your quick response.
Thanks,
Jayasudha

Hi Everyone,
Follow this path in ECC system
SPRO-Reference IMG-Logistic general-Logistic information System-Logistic information warehouse-Databasis- Tools-SetUp Statistical Data-Application-Specific Setup of Statistical Data and click the notepad symbol for you required application in this case its SD. It will give a complete step to load data.
Regarding data not loading:
The reason could
1) No update group maintained for the Sales document (check table VBAP)
2) Mark the check box in the tcode OLI7 (Redetermine update group & update documents)
Even i am facing an issue where the sales document number without update group are not getting update to S001 info structure.
Any clue why ?? What should be done in that case

No data in RSA3

Hi Friends,
I'm right now working on some of the HR data sources, well when I extract the data from RSA3 there is no data in it, but when I actually check the R/3 tables from where it gets data , there is data in the tables, and also I'm checking in the same client where I'm actually extracting.
Note : these are not the logistics data sources.
I would really appericate and award points , if someone can come back on this.
Thanks alot in advance,

1> Go to RSA3
2> Below the "Datasource" - where you enter the datasource , there is a box called " Execution mode".
3>Tick the check box "Debug mode"
4> Now execute the Extractor
5> It will take you to debugger. Now you can execute step-by-step and see how the contents are being filled (internal tables, variables etc.
If you want more info i can send you screen shots. Mail me at [email protected]
Saikrishna
ps: Thanks for the points - my first points in SDN
Message was edited by: Saikrishna Kondaraju
Message was edited by: Saikrishna Kondaraju

Data is not coming in RSA3 for LIS Data Source 2LIS_02_S174

Hi BW Experts,
We got one requirement on LIS. I haven't work on LIS previously.
Data Source Name: 2LIS_02_S174, This is activated and able to see in T-Code: OMO2.
First we checked the contents of S174 in SE11 & RSA3 and found 0 Records before filling the Setup Tables.
Then we filled the Setup Tables for S174 and finally got 0 Records in RSA3 as well as in S174 table also after filling the Setup Tables.
I have Given version name : &(A
We dont know, what are the settings we need to do before filling the Setup Tables. But we checked job overview in SM37 and it was taking 120 Sec.
Thanks in advance
Regards
Pinky Reddy

Hi Pinky
Yes, LBWG is the generic T Code for deleting the setup tables of any application area. You need to enter your application area number in LBWG which deletes the content of all the setup tables pertaining to that application area.
Please make sure before performing LBWG that you have activated the extract structure for the particular Datasource in LBWE.
For filling 2LIS_02_S174, use OLI3BW.
Thanks
Nirmit

Fields missing from Data Source but displayed in RSA3

Hello Experts
I have an issue while finding for a field in the data source. As I am looking for some fields : MABST, MINBE, EISBE on BW Side but not found. When I llok the same fields in ECC Side in the table RSOSFieldmap, then I get these fields in 0MAT_PLANT_ATTR Data Source. In the same time , the fields are not available in the Data source on BW Side as well as on ECC Side(while goin thru RSA6). Also when I execute the RSA3 for the data source, I am getting the data in the Missing Fields. How it can be possible? Also plz let me know how can I make these fields available in Data Source.
I replicate the data source, also i looked for the hidden fields, but still not succeed.
Thanks in advance
Neha

Hello,
TO unhide the field,
Just Goto T.code RSO2 > press change button.> unhide the filds and --> Generate the Datasource
or
Goto RSA6 --> select the Datasource and --> press change button (pencil icon) --> unhide the filed --> Save and Generate the Datasource.
Try the above two option and check if it is working.
also go thru the below post
BI : Hidden field Datasource
Hope this helps,
Sri...

RSA3 data and PSA data not matching

Hello All,
I am in BI7.0 and trying to Load FI_GL data usng 0FI_GL_4 DS from ECC6. I was able to install, activate all necessary standard objects that are involved. I have executed data Load from Infopackage by doing Init. with data Transfer..which went okay and now i am data upto PSA Level with everything green status. But when I noticed that in PSA Maintenance screen its showing whole lot more data..it shows 103 Datapackages transferred and lot of data records in each packages.
In R3 side (RSA3) shows only 831 records. IN BI7 , monitor screen shows more then 9 million records recieved.
Could anyone tell me why this happened? Is it possible that this particular PSA already had data on it? if so How can i find and delete previous records from this PSA? please suggest...
thanks
dk

Hello,
1)The error comes if the data is wrong in the DSO.
Something like before and after image are missing for a record and thats why change log is having some issues.
you can check the data between new tables and PSA and see if its matching or not.
Try to delete all the data from the PSA and the DSO.do proper mappings again especially in the keys of the DSO and then reload it.
try to load it for a small a amount like one company code and one fiscal period.check in PSA if its matching or not from RSA3.
2)If the data is getting loaded then there should not be a any problem with the data source.DTP could be an issue.the program is to activate the data source in BI 7 system and if the data source is already activated then you dont need this again.
3)Rule proposal can be generated if the fields are same and have same technical name.in your case the field name are different since its datasource and DSO mappings and therefore you will have to do mappings manually.
4)you mean RSA3??
RSA3 displays the data from tables only in case of full mode.Also,try to do full loads till the PSA and then check for the same in RSA3 in full mode.keep the package size and number of calls maximum so that it will show you correct number of records extracted.
RSA3 is an extractor checker and can be used for verify small amount of data,dont use it for verifying the datasource for all the drecords.
use underlying tables if you want.
if init is done properly then the data will be correct and you should verify it with the tables and not RSA3.
Regards
Ajeet

2lis_18_i0item Datasoure - 0records in RSA3..

Similar Messages

Maybe you are looking for