2nd AirPort Express to extend wireless range of 2WIRE Home portal

I have successfully networked 2 pcs and 2 macs wirelessly via my 2WIRE home portal and and AirPort Express which I use to play music throughout my home from all four computers. However, I would like to extend the range of my wireless network into a part of the house which is quite a ways away from my AX and my stereo. Will a second AX achieve this goal? Thanks for any help you can offer!
iMac Core Duo Mac OS X (10.4.6)

To change the Channel your 2Wire Gateway broadcasts it's wireless on, follow these steps
Type one of the following addresses in a browse:
http://home
http://homeportal
http://gateway.2wire.net
http://192.168.1.254
- Click on homenetwork
- Click on Wireless settings
- enter password if prompted
- where it says wireless channel, change it in the drop down menu.
- click save or submit
Mac OS X (10.3.9) G4 AGP Graphics & G3 ibook 800

Similar Messages

Airport Express to extend wireless range?

Just received an Airport Express for Christmas and wanted to use it to extend my wireless range. I have an Asante FR1004AL wireless router connected via ethernet to DSL modem and a Titanium Powerbook using OS 10.3.9 and an original Airport card. I am interested in finding out how to make the AX extend the wireless connection, when I plug it n all I get is a flashing amber light and can't access the Asante via Airport Assistant to make any adjustments. I am wondering if anyone can tell me if the AX will recognize the Asante router since I can't make it work. If the Asante is compatible, I guess I need some instructions about how to get the AX to work with this setup. I have no experience with wireless setups, very much a novice in this area.

The only way you can extend the wireless range is to run an Ethernet cable to the Airport Express and set what's called "active roaming" (see Apple's Knowledge Base; search for "active roaming").
In order to extend the range strictly wirelessly, you need a base station that supports the flavor of Wireless Distribution System (WDS) that Apple uses in their base stations. As far as I know, only Apple Airport Extreme/Express base stations, LinkSys WRT54G, certain Buffalo Technology models, and one Belkin model support a compatible WDS protocol.

I have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. unility says it has found a new base station

i have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. utility says it has found a new base station and asks if i want to use it. if i click yes, then the old setup is disabled.

Ok, thanks for clarifying which models you have. Please see the following Apple Support article on how to configure these older base stations for a Wireless Distribution System (WDS).

Help: Using Airport Express to extend the range of Airport Extreme

I am trying to use the Airport Express to extend the range of the network created by my Airport Extreme. The Express works in terms of streaming music from iTunes on the PC connected to th Extreme.
However, I am trying to run a short Cat-5 cable out of the Express to a nearby PC in order to have access to the internet. If the Express is recognized by the Extreme and can play music through connected stereo cables, why can I get an internet connection through the LAN port..??
Here's a real basic representation of my connections...
Cable Modem >>-- Cat5 -->> Airport Extreme >>-- Wireless -->> Airport Express >>-- Cat5 -->>PC#2

To wirelessly extend the range between two AirPorts, you need to configure them in a Wireless Distribution System (WDS).
To facilitate the WDS set up, try the following:
o Perform a "hard" reset on the AirPort Extreme Base Stations & a "factory default" reset on the AirPort Express Base Stations (AX) before setting up the WDS.
o Place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete.
o To avoid having to "switch" wireless networks during the WDS setup, attach each of the remote/relay base station, via an Ethernet cable, to the main base station. Of course, this would be dependent on the AirPort types used for the main/relays/remotes.
o Be sure to jot down the MAC addresses for each of the base stations to be used in the WDS as these will be required during the setup.
o When enabling wireless encryption, configure the relay/remote base stations first and the main base station last.

HT4259 I am trying to connect airport express to extend the range of my airport tower. What type of cords do I need to connect the airport express to a hardwired outlet in the wall of a bedroom?

I am trying to connect my airport express to extend the range of my network to a bedroom that is hard wired for internet. What type of cord/cords do I need to do that?

You can connect the AirPort Express to the wall port in the bedroom for the setup.....but first....if you have not already done so.....it would be a great idea to make sure that the connection in the bedroom is working correctly.
To do that, turn off the wireless on a laptop and connect the laptop directly to the wall port in the bedroom using an Ethernet cable. Make sure that the laptop can get a good Internet connection that way. If it can, this tells you that the cabling is working correctly, so the Express will work well when you connect it up.
If you don't have a laptop with an Ethernet port, then we'll have to assume that the folks that pulled the cables and installed the jacks tested things as part of the installation.
When you are ready to install the Express, you can use an iPhone or iPad if you have one handy for the setup.

Adding a 2nd Airport Express to extend the network using WDS

I am a bit of a novice, but after I installed an airport express with my d-link wireless router to play itunes on my home stero, the music kept breaking up and stopping. I tried to change the channel, but it said mine was set on automatic and I cannot figure out how to change manually.
So reading apple's suggestions, they said to get another aiport express and extend the network with WDS. I purchased my 2nd express today and have been trying to install it using the airport express assistant. I have had to reset the 2nd express and the original several times. However, what i keep running into is after it gets through all the steps, it asks me for a password for "this basestation". I have read several help topics and it looks like i need to use "public" for this new airport express. I get through that step and then it gives me an unknown error (-6753). Does anyone know what this is? Or is there a way to set-up the 2nd airport express manually? Do I even need a 2nd one? Should I just get an airport extreme? Will that extend the range of my wireless network? Any help is greatly appreciated. I have been at this for about 6 hours now. My wife is going to kill me.

Will the manual for D-Link describe how to set up the
first airport express as a roaming network
No
do that via the apple settings once its connected via
ethernet cable?
Yes
Different channel.
Same network name, same security.
Ensure that distribute IP addresses (under Network) is unchecked.
When this is done, will I still be able to play
itunes through the first airport express?
Yes
Also, then once I do that with the first, then do I
just do the regular set-up for the second as a
network extender via the airport express assistant?
Yes
iFelix

Can I use a 2nd Airport Express to extend signal?

I have the AirPort Express 2nd gen. I play music via my iPhone & iPad when I am "in range" with the AirPort Express thru my home music system.
If I go outside, my iPhone drops the signal and music stops. My iPad on the other hand has a stronger signal and the music plays on in the same location.
Can I purchase a 2nd AirPort Express and use it as a wifi extender or range extender to increase the distance of my wifi signal?
Or, can I use any wifi router to accomplish this?
I'd like to stay all Apple, if possible, as mixing Apples and Oranges is not good.
If so, can someone please tell me how to set this up?
Thank you all for your valuable assistance.
SmokinTulip

The AirPort Express 2008 "extender" is about 80 feet away from the AirPort Express 2012 (new) model. Is this too far to get a good signal?
Wireless performance is affected by "interference". If you have a clear, line-of-sight path between the AirPort devices, then 80 feet may not be too great of a distance.
But, if there are walls or ceilings or other obstructions in the signal path that "interfere" with the wireless signal, the distance that the signal can travel and maintain decent signal strength and speed is dramatically affected.
On average, a typical wall (sheetrock and 2 by 4s) in a home will absorb anywhere from 10-20% of the signal. As you might imagine, a ceiling will absorb even more of the signal since it is thicker and more dense than a wall.
Heavy furniture, large mirrors (a mirror has a metal backing) will really slow down and absorb the wireless signal as well.
If the wireless signal must pass through multiple walls, or a ceiling and a few walls, not much of the signal will get through.....even if the distance might be only 20-30 feet between the AirPort devices.

Airport Express to Extend Network Range

Hi everyone, hope somebody can help me out with this.
I have an airport express which I had been using as a wireless router. It worked fine although the range wasn't all that good, so I got a new Linksys wireless router and installed it in the living room. I was planning on using the airport express to extend the Linksys range by plugging the airport express to the power in my bedroom.
Anybody know how I can make that work without having to plug the ethernet cable into the airport express??
Thanx

david_neg, Welcome to the discussion area!
I agree with Niel. You might be able to get it to work if the router is a Linksys WRT54G or WRT54GS (not latest versions v5). If you are using something else the chances of working are near zero.

Using wired Airport Express to extend wireless network

Hello,
I am considering getting an Airport Express to extend my wireless network in a part of my house where it's really weak. The room I want to use it in actually has an Ethernet network drop and it is connected to my Airport Extreme on the other side of the house.
I've looked at the manual, and the only example it gives for extending a network is wireless. Since the network is very weak where I want to use it, I was wondering whether I could use the Ethernet port for the incoming signal. Is that possible?
I have an older AX (the b/g model) that I use in a similar way: it's on an ethernet port, but it broadcasts its own, different (slower, since it's the older model), wi-signal. So I didn't want to do that: I'd like the new unit to be practically transparent and broadcast the same wi-fi as the main signal.
Has anyone else had a similar experience and if so, could you let me know if this is possible?
Thanks!

I was wondering whether I could use the Ethernet port for the incoming signal. Is that possible?
Yes
I'd like the new unit to be practically transparent and broadcast the same wi-fi as the main signal.
Configure the new AirPort Express as follows using AirPort Utility - Manual Setup
Click the Base Station tab located below the row of icons to assign a name to the Express, a device password and adjust Time Zone settings
Click the Wireless tab and configure as follows:
Wireless Mode = Create a wireless network
Wireless Network Name = Exact same name as your AirPort Extreme network
Radio Mode = 802.11n (802.11b/g comatible) is a good general choice
Channel = Automatic
Wireless Security = Exact same setting as the AirPort Extreme network
Wireless Passwrod = Same password as the AirPort Extreme network
Confirm Password
Click the Internet icon
Click the Internet Connect tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings and allow the Express to restart
Very important...power down the entire network...all devices....order is not important
Wait a few minutes
Start the modem first and let it run for a few moments by itself
Start the AirPort Exreme the same way
Start the AirPort Express the same way
Start other devices one at a time about a minute apart
You now have what is known as a "roaming" network. Computers will automatically log on to the router with the strongest signal as they "roam" around the house.

How do I resolve error 10057 when trying to set up my airport express to extend the range of my wireless network

I have a Dell XPS running on Windows 7 and use an AirPort Extreme 802.11n Wi-Fi to get wireless internet access for other laptops in the home. I want to connect an AirPort Express 802.11n into the network to wirelessly extend the range of my wireless network. I have installed the AirPort Utility but when I attempt to connect to the AirPort Express, it gives me an error code 10057 and says I should check the internet connection. I have tried resetting the TCP/IP settings on my PC but that did not fix the issue. The Airport Express is also flashing yellow rather than solid green. Has anyone found a fix for this issue?

This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

How to use the airport express to extend the range of an existing airport extreme wireless network?

The instruction manual says nothing on the topic, so maybe it is not possible. The only reason I think it is possible is that two different Apple reps told my girlfriend it was possible. Now we have one, and no clue how to proceed.
We have an Airport Extreme, but its range is maximum 30 feet. We would like to double that. What do we do with the Airport Express? (We cannot move the modem nor the Airport Extreme. What we are trying to do has nothing to do with speakers, iTunes, or printers.)
thanks
Paul

Are both the Extreme and Express 802.11n models? If so, check out this AirPort Support article; if one or both are 802.11g models, check out this article instead.

How do I add an Airport Express to extend the range of my WIFI network with my iMac as a base station?

Hi people
I need help to configure a new Airport Express only to extend the range of my WIFI network.
My ethernet cable from modem is connected directly in my iMac and I am sharing the internet by WIFI inside home very fine.
Now, I would like connect my devices on my garden on backyard.
I can't move my iMac from their place and i just want add a Airport Express between the iMac and backyard to extend the range of WIFI.
But I can't to configure to that. On Airport Utility appear the Airport Express connected directly to internet globe, but don't work.
So, what can I do? What is wrong?
Thanks all and best regards.
Carlos Sgrillo, from Brazil.

The AirPort cannot do what you ask.
The Airport needs to connect to a modem, or another router......not to a computer.
The Express can only extend a wireless signal that has been provided by another Apple router.

I have an old airport that still works, can you use it the same way that one uses an airport express to extend the range of an airport extreme base station?

It would save me a few bucks if I could use an old airport that I have to extend the range of a new airport extreme. My concept would simply be to use the old Airport the same way I would use a newer Airport Express as a slave repeater. Is this doable?

Both the new AirPort Extreme and older AirPort Express will have to be configured using Apple's WDS settings to provide more wireless coverage.
Here are the downsides:
WDS operates only at "g" wireless speeds, so you will lose all of the faster "n" wireless capability of the new AirPort Extreme
WDS cuts the bandwidth on the entire network in half, so you will have a "g" wireless network running at half speed.
WDS is difficult for most users to configure because it is easy to make a mistake and hard to recover without starting all over again
Bottom line......Saving a few bucks will be very costly in terms of performance on your network.

Problem using Airport Express to extend wireless network.

I'm trying to extend my wireless network with an Airport Express (brand new, bought last week), but can only seem to do so by connecting it via cat5 to the router, which doesn't actually extend anything. I have a Linksys WRT54GS with DD-WRT, and want to have the Airport Express in a different room so cat5 isn't an option.
I'm using WPA2 Personal security on my network.
I've tried to follow several sets of instructions from these forums and on blogs, but the only things I've been able to do are...
1) connect via cat5, selecting "Create a new network" with the same SSID and such, but it doesn't give me any more range.
2) connect wirelessly selecting "Join an existing network", but that doesn't extend the network at all either, even if I put the AE at the edge of the network now.
Thanks in advance. All I really want to do is access my wireless from the other half of my house.
Zack

It was possible to create a WDS between the older 802.11g AirPort Express and the Linksys WRT-54GS and this (as you know) has been documented on the Internet. However, I do not know of anyone that has been successful doing so with either of the 802.11n generations.
The two methods that you have tried would not work as neither is the proper method to set up a WDS. Please check out the following Apple Support article for more details. If you are successful in setting a WDS between them, please post back your results.

How to configure Airport Express to Extend Wireless Network

I have an Airport Extreme (AE1) as my wireless router, with two other Airport Extremes (AE2 and AE3) connected to it via ethernet and operating in bridge mode. Together they cover the first floor of my house with wifi, but I want to use an Airport Express (AX1) situated on the second floor to connect wirelessly to AE2 and extend my wifi network to the second floor of my house.
Nothing I have tried has allowed AX1 to extend my wireless network. I'm using the latest Airport utility in Mavericks, and AX1 is the old plug-in type but it's the newer "n" version that is still configurable by Airport Utility. Any suggestions would be appreciated.

I almost ALWAYS recommend against wirelessly extending your network. Obviously, I'm unfamiliar with your layout but 3 extremes on the same floor seems like overkill, too, but could make sense depending upon contruction and usage.
In any event -
Adding Wi-Fi base stations when it is unnecessary can reduce Wi-Fi throughput because the Wi-Fi network will require more data management overhead. The network configuration also becomes more complex. In the case of a wirelessly extended network, throughput may be reduced to less than 60 percent of that of a single device.
Risk free test - run some speedtests in the corners then remove an extreme and re-run the tests. Then, buy one of the new tower 'AC' extremes and set it up as your single router and test again. I call this risk free since you have 14 days to return the new 'tower' extreme if you don't want to keep it but its range is THAT much better than the prior gen. You could make this cheaper by buying it from the Apple refurbished store and selling your older extremes.

2nd AirPort Express to extend wireless range of 2WIRE Home portal

Similar Messages

Maybe you are looking for