[2nd ask] screen problem?

hello, last time I asked the same question: "Is there any problem with my screen?" but looks like the problem didnt really shown by using screen capt so now I upload the one I captured with my phone
[does the picture show my problem? if not please notify me]
just now happened in Youtube and facebook.
The dark (black) area of the display become big green pixelated area. It just suddenly happened and not always, just 'sudden'. Anyone knows what causes this? Much thanks!

Yes, it doesnt change. Sometimes it happens then gone, then happens again. When I play a YT video, the start screen of the video would be green, not black. This is my MBP:
Mac OS X
version 10.7.4
2.2 GHz IntelCore i7
4GB 1333 MHz DDR3
AMD Radeon HD 6750M 512 MB
I bought my MBP around Feb-June 2011, do you know how many years are the warranty? I think it's limited to one year only right?

Similar Messages

  • I bought my Mac Air 13' in August. Black screen problems constantly happens. I asked some of my friends who also use Air. They share the same experience. Overall, it is a pretty good computer. But it bothers me when I do work and it suddenly goes black.

    I bought my Mac Air 13' in August. Black screen problems constantly happens. I asked some of my friends who also use Air. They share the same experience. Overall, it is a pretty good computer. But it bothers me when I do work and it suddenly goes black. What should I do about it?

    without more information, I assume you mean a blackout from sleep issue.
    Go to system preferences > energy settings > raise the "turn display off" setting up to as needed, say 5 mins. or 10 mins.
    AND ...
    unchecked the "Put hard disks to sleep when possible" in both the battery and power adapter tabs.
    test it and check back

  • TOUCH SCREEN PROBLEMS IN IPHONE

    WANTED TO KNOW IF ANYONE IS EXPERIENCING TOUCH SCREEN PROBLEMS WITH THE UPPER HALF PORTION OF THE IPHONE. IN THE PHONE MODE THE 1, 2 & 3 NUMBERS DO NOT RESPOND TO MY TOUCH. IN THE HOME SCREENS, NOTHING IN THE FIRST ROW OF ICONS RESPONDS TO MY TOUCH.
    I HAVE ALREADY RESET, RESTORED AND LOADED THE UPDATED SOFTWARE.
    VERY FRUSTRATING. HELP.

    When restoring my phone didn't work, I backed up my data and made an appointment at the Apple Store. I went prepared to argue my case as my phone was over a year old (I got it the first day it was out) and didn't do any thing to damage the phone. It just developed this dead spot. I was honest about how long I had the phone and expressed that this was a common problem that is all over the internet and from what I could tell, I wasn't the only one in there for this problem. I was tipped off by a question he asked, "What row went dead?" He obviously had seen this enough times to know that different rows in the home screed went bad. I told him the second row. The conversation went on and somewhere there was some back room talks and they replaced my phone, which was very nice, but I'm betting this doesn't happen all the time. I think I got lucky. Over all I give Apple a 10 out of 10 for Customer Support. I doubt I would be so generous if I had to buy a new phone. I was told at first that it was going to cost me $249.00 to repair the phone, maybe he said $199. At any rate, I would have bought a new G3 instead of getting this one repaired. I tried to get the Apple Care on the replacement phone but they wouldn't allow that. So I have a 90 day warranty right now. I highly recommend that you get Apple Care on the iPhone. I'll be getting it on my next one. I don't know if this phone is new or a refurbished phone. It looks new, but I'm guessing it's refurbished. All in all I'm hoping that Apple realizes this is a problem with the screen and it's a problem that they need to fix or continue to fix when they go bad for no good reason. Well that's been my experience hope yours turns out as well.

  • Sudden macbook pro screen problem after genius bar "repair"

    I took my 15" early 2011 MBP (still under 3 year applecare) to the genius bar after I discovered the battery had swollen up and was pushing the trackpad up. They replaced this and I also asked them to reapply the thermal paste as I felt like it was running hot causing the fans to increase with relatively little load (apparently there was a problem with the early 2001 MBPs and thermal paste which is well documented elsewhere). Machine worked great when they handed it back to me in the store.
    But when I turned it on a couple of days later, serious problems! First there was a messed up blue / grey / purple / green screen with lines all over it & it didn't boot. I felt like the DVD-drive noise it usually gives sounded lower pitched than usual too but I could be imagining that.. I turned it on & off several times and each time a similar (but slightly different) screen. I tried various different "startup key" combinations eg safe boot, hardware test without success.
    However after I reset the NVRAM I got just a grey screen which then booted into snow leopard. It could've been a coincidence that this happened after the NVRAM reset, I don't know. Anyway, the mac is sort of working - great!
    BUT the screen colours are still messed up. Looks like what I'd imagine you'd get if you tried to run in 16 colours. There's also some flickering near the bottom of the screen. Weirdly though, when I click and hold on some items, eg in the dock, the colours seem more normal again on parts of the screen.
    Examples below:
    1. colours look terrible here!
    2. the blue triangle isn't right at all. (note the curvy lines are just an artifact from the camera)
    3. however when I click there is is some improvement to some of the colours on bits of the screen eg the dock items (except the logic icon which still looks wrong) - I don't think the big circle in the middle is right (that's not a flash, it's on the screen).
    I've tried to run the hardware test by holding down D on start up and aside from taking longer to boot, I don't get any options to run tests.
    Anyone have any idea what could be causing this?? As the colours are correct sometimes, I'm inclined to think it's a video card problem rather than a screen problem. System profiler says I have and AMD Radeon HD 6490M & Intel HD 3000. I'm just wondering if they could've somehow damaged the video card when reapplying the thermal paste. But I really don't know.
    I will book another genius bar appointment but there's a 1 week wait and it's kind of annoying!
    Thanks.

    bastienvans
    There's no recall for early 2011 machines - only for mid-2010 models.
    But you're right - there's a growing thread here of hose having problems with the early 2011 GPU. Odd that it doesn't seem to affect those with late 2011 models.
    Clinton

  • My iPad Air have a screen problem so I sent it to iService (I'm Thai) but they told me that they don't know how long that I have to wait until I will get a new one? Can anyone help me?

    My iPad Air have a screen problem so I sent it to iService (I'm Thai)
    but they told me that they don't know how long that I have to wait until I will get a new one?
    Because they said there's no stock in Singapore
    Can anyone help me?
    Just bought on 15/11/2013

    You can call iService and ask to speak with a manager.

  • Z10 screen problem

    I have a damaged Z10 screen and received a replacement Z30 from service provider, however unable to device switch on Blackberry Link as cannot login to old Z10 device due to screen problem. Is there a way to device switch so that I can recover info on my old device? Is there a way to erase Z10 device as don't want to return it with info on it despite the damaged screen does not allow access? Regards

    The data backups on BlackBerry Link are associated with your BlackBerry ID. You need to sign in to your BlackBerry ID on your new phone then you should be able to restore it with your backup file. One you've logged in to the new phone, you'll be asked if you want to associate your BB ID with the new phone. Once you say yes, any information associated with your BB ID should be accessible by your new phone.
    The Device Switch feature might not work but to sign in to your new phone then load a backup file should work.
    Cheers.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • X230 Screen problem

    Hi,
    I just recieved my second x230 laptop and having problems with the screen. The screen is constantly shimmering and it 's much more obvious when the background is set to dark grey. This is the replacement that I just recieved and It still has the same problem. On the first one the trackpad was loose and had the screen flickering problem so I asked for a replacement and this one the same screen problem and also the battery does not fit in properly even when I lock both sides there is still a big gap on one side and it's quite loose. I m totally disappointed with the Lenovo quality control. but also tired of sending them back and forth as I believe the next one will probably have some other problems. What I already tried:
    1- BIOS updated
    2- All the video drivers updated
    3-Increased the ram to 16GB
    None of them solved tthe issue. By the way this is an IPS display.
    I would appreciate any response  if someone had the same problem and managed to solve it somehow.
    Thanks,
    Ale
    Solved!
    Go to Solution.

    Does it change with increasing brightness ? You might be sensitive to slow pulse modulation used to control brightness of the LED backlight.
    As for the flickering with some pattern I can see it as well on my X220. Even my NEC 2090 UXi professional monitor has the issue when turned on but it slowly disapears in few hours. The reason is fully explained here http://www.lagom.nl/lcd-test/inversion.php and there is probably no solution for that in notebook display segment. It is unlikely that you got two boxes with the issue that will be just a bad luck but there might be a batch of displays that exhibits the issue more than others.
    Another reason might be FRC used to simulate 8 bit colors resolution per channel. The X220/X230 display is very likely e-IPS technology that is limited to 6 bit only. The particular FRC implementation might also exhibit annoying flicker effects for some color combinations.
    Sorry, I don't have any good advice. Buying a LCD monitor is always a nightmare for me because there are too many possible issues that would annoy me. On the other hand, X230 is currently the only Lenovo notebook that have a decent display. Other models have TN craps only.

  • Screen Problems after Leopard install.

    When I first installed Leopard, I got a black screen full scrolling white text after only 10min of use.
    I did a clean install and that problem is gone, but I'm still getting very odd screen problems. The Apple logo and translucent part of the menu bar go away at times and it freezes some times too.
    I was wondering if any other iMac G4 users have had these problems... ???

    I believe the default settings for labels and text in Finder windows, if that's what you mean, is 12 point. You you can change font size through View Options. Text sizes for menus, etc. is fixed; I don't know what the size is specifically. For Firefox, text size for web pages is specified by the web site generally, but you can change the size Firefox will default to in the Firefox Content preferences.
    I hope I've answered the question you were asking. Regards.

  • How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

    Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update  to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
    The Background/history
    I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8.  I created a single partitioned drive to install windows 7 professional 64 bit.  The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in.... 
    The installation of Windows 7 Pro 64-bit
    So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black....  in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
    The problem, re-emphasized :  I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files?  not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run...  Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver  without having been able to complete the windows 7 installation because the monitor goes and stays black????
    This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
    Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
    ---I've been told to install the osx dvd and run "setup.exe"  - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
    ---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/  for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
    ---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

    hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something?  if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean?  it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
    Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this?  just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600?  (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
    So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
         1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
         2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

  • Trying to update OS to fix White Screen problem.

    Hello, I have had my Blackberry 8520 on a Virgin contract for about a year and a half now. Recently it has started randomly just changing to a black white screen that won't allow me to turn it off or perform any functions. The way I temporarily fix this is to plug it into the charger which acts like a reboot and brings it back to normal (pulling the battery to reboot it just restores the white screen after loading). In trying to find the resolve to this problem, which I haven't yet, I rang the Virgin helpline who told me to update my OS. I currently have the version 5.0 Bundle 1096 and I am trying to update it to the 5.0 Bundle 1168. I have been having increasing problems with trying to do this. I updated my desktop software for Blackberry but updating through this software always brings up the message at the install stage (after backing up my data) - "An error has occured while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." My internet is working fine and I have tried many times to update through this way. I have also tried updating through the blackberry website "web based updates area" that brings up the same message. Looking through over message boards, I tried the attempt at updating through the LOADER.EXE way. However after trying to download the OS manually to my computer, which my internet explorer thought was dangerous, it came up after with another error message - "Error 1335. The cabinet file 'Data1.cab' required for installation is corrupt and cannot be used. This could indicate a network error, an error from reading from the CD-ROM, or a problem with this package.' I am now out of ways to try and update my Blackberry and have no idea how to solve the white screen problem. Any help would be much appreciated. Karen x

    Just to specify the final type of the updating I tried was following the instructions on this links - http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html I choose Europe, Virgin Media, Blackberry curve 8520. I got the software on to my computer and the error message that came up, appeared after choosing language and agreeing to the terms and conditions and starting the installation. Sorry about the big clump of writing; the post removed all of my paragraphs when I posted it. New to this! And need help! Thanks x

  • Screen problem making iPad unusable

    My iPad2 is 15 month old and has developed a strange screen problem. It seems to have developed a mind of its own, typing ahead with random characters, doing its own thing when scrolling and trying to select in apps. Two days ago Apple support said restore to factory settings which I did. Same problem came back. Yesterday Apple support said the same thing which again I did. Same problem came back Today Apple support say it's a hardware issue out of warranty. We had a polite discussion about EU legislation but to cut a long story short, they basically said "sorry about that, but there is nothing our policies will let us do, you're on your own"
    Not exactly the response I hoped for. So I've now got an iPad that is basically useless, unless I want to use it as a door stopper.
    My business made a strategic commitmnt to Apple in Mid 2011 and this iPad was part of our shift away from PC/Windows. It's the first time I have needed to deal with Apple Support, and while each of the people I have spoken to have been professional, understanding and helpful, they have been unable / not allowed to assist any further.
    Yes, we could have taken out Apple Care Agreements. We chose not to on the basis of 2 year statutory warranty and Apple's reputatiuon for reliability. Seems I made a big mistake here and am left wondering if we made the right decision in going down the Apple route. Our investment in Apple hardware and software is massive for an SME and our workflow depends on iPads.
    I'm left with a problem. Thanks Apple.
    I'm still a fan but my blinkers have been removed. No longer will you be giveen the benefit of the doubt when you screw up - Maps, WiFi etc - as you have had a direct and negative impact on my business and missed a chance to keep a very happy customer on board.
    Does it help to post this? Not really, but it's off my chest.

    And you are within your "rights" to post this. But you do realize that we are not Apple employees - correct? We are just other users like yourself. If you feel that you have been treated unjustly, move up the Apple chain of command. Politely demand to speak to the next higher up and go from there.

  • Screen problems with photoshop elements 10

    I installed Photoshop Elements 10 and Premiere Elements.
    Premiere Elements works allright, but Photoshop E 10 gives screen problems.
    De menu's on the top roll out, but there is no text in them.
    The screen in Organiser is distorted.
    I reinstalled P E 10 but the same problem accurs.
    I dit a computer reset to an earlier date and installed Ph.E. 10 again but the same problem. No text in the topmenus and a distorted screen in Organiser.
    Letters become 6x larger than normal.
    All my other programms work fine. I never had screenproblems.
    I use Elements 8 now again and that works fine.
    I use: Windows 7
    Card: NVIDEA GeForce GT 220 resolution 1680x1050
    Do I have to remove Elements 8 before installing Ellements 10? Is that perhaps the problem?

    Ken, The problem is: The buttons don't work. So I cannot use Edit...
    But:
    I reïnstalled Adobe Elements 10 for the 4th time
    Cleaned my register again.
    restarted my computer
    Did a computer reset to an earlier date
    Installed Elements 10 again but .......not the try version of Premiere Elements.
    Now Elements 10 has a normal screen.
    This was a try and error sollution. I hope it will last.
    Jan

  • Can anyone identify screen problem that freezes (pic)

    Can anyone identify my screen problem that freezes? Alternately I get this image all over screen (see pic) or just a few horizontal dotted lines.
    I have to force reboot.
    Any thoughts appreciated.
    iMac27, 3.5Ghz i7, 32 Gb ram, 3T drive.
    Mavericks 10.9.5
    I use the Adobe CC suite the most.
    Thank you.
    ETRE report prior to this image
    Problem description:
    iMac keeps freezing and returning to login
    EtreCheck version: 2.0.11 (98)
    Report generated 4 November 2014 2:45:09 pm AEDT
    Hardware Information: ℹ️
      iMac (27-inch, Late 2013) (Verified)
      iMac - model: iMac14,2
      1 3.5 GHz Intel Core i7 CPU: 4-core
      32 GB RAM Upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 0/DIMM1
      8 GB DDR3 1600 MHz ok
      BANK 1/DIMM1
      8 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n/ac
    Video Information: ℹ️
      NVIDIA GeForce GTX 780M - VRAM: 4096 MB
      iMac 2560 x 1440
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 0:15:11
    Disk Information: ℹ️
      APPLE SSD SD0128F disk0 : (121.33 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Boot OS X (disk0s3) <not mounted> : 134 MB
      Macintosh HD imac27 (disk5) /  [Startup]: 3.11 TB (2.84 TB free)
      Core Storage: disk0s2 120.99 GB Online
      Core Storage: disk3s2 3.00 TB Online
      SAMSUNG HN-M101MBB disk1 : (1 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk1s1) <not mounted> : 210 MB
      disk1s2 (disk1s2) <not mounted> : 999.86 GB
      Boot OSX (disk1s3) <not mounted> : 134 MB
      SAMSUNG HN-M101MBB disk2 : (1 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk2s1) <not mounted> : 210 MB
      disk2s2 (disk2s2) <not mounted> : 999.86 GB
      Boot OSX (disk2s3) <not mounted> : 134 MB
      APPLE HDD ST3000DM001 disk3 : (3 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk3s1) <not mounted> : 210 MB
      Recovery HD (disk3s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD imac27 (disk5) /  [Startup]: 3.11 TB (2.84 TB free)
      Core Storage: disk0s2 120.99 GB Online
      Core Storage: disk3s2 3.00 TB Online
    USB Information: ℹ️
      VIA Labs, Inc.          USB3.0 Hub             
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Wacom Co.,Ltd. Intuos PTS
      VIA Labs, Inc.          USB2.0 Hub             
      Fitbit Inc. Fitbit Base Station
      Apple, Inc. Keyboard Hub
      Apple Inc. Apple Keyboard
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
      LaCie Little Big Disk
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.wacom.kext.wacomtablet (6.3.9 - SDK 10.9) Support
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [failed] com.adobe.AdobeCreativeCloud.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.wacom.wacomtablet.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.fitbit.galileod.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.koingosw.MacCleanse4Helper.Reminder.plist Support
      [loaded] com.koingosw.MacCleanse4Helper.TrashWatcher.plist Support
    User Login Items: ℹ️
      Creative Cloud Application (/Applications/Utilities/Adobe Creative Cloud/ACC/Creative Cloud.app)
    Internet Plug-ins: ℹ️
      AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      EPPEX Plugin: Version: 4.1.0.0 Support
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      Default Browser: Version: 537 - SDK 10.9
      QuickTime Plugin: Version: 7.7.3
      WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 Support
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User Internet Plug-ins: ℹ️
      Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 Support
    Safari Extensions: ℹ️
      Dashlane
      Pin It Button
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
      WacomTablet  Support
      Backup size 2.00 TB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          7% Safari
          5% WindowServer
          4% WacomTabletDriver
          1% WacomTouchDriver
          0% powerd
    Top Processes by Memory: ℹ️
      241 MB WindowServer
      213 MB com.apple.WebKit.WebContent
      206 MB com.apple.IconServicesAgent
      206 MB Safari
      172 MB mds_stores
    Virtual Memory Information: ℹ️
      27.84 GB Free RAM
      4.04 GB Active RAM
      708 MB Inactive RAM
      1.76 GB Wired RAM
      518 MB Page-ins
      0 B Page-outs

    I ended up calling Apple Support twice. After first time when we checked drives etc, the second time they said we had done everything and it must be a hardware issue. It had to have a logic board replaced.

  • Apple macbook pro with retina display is having yellow screen problems in which screen is not perfectly white and is yellowish. More over the service frm apple's part is ridiculous as they have faulty spare part. Does ne1 hv email of senior person?

    Apple macbook pro with retina display is having yellow screen problems in which screen is not perfectly white and is yellowish. More over the service frm apple's part is ridiculous as they have faulty spare part. Does ne1 hv email of senior person?

    Apple service centre employee told me that they do not have this 14 day offer in India.
    And My mac book pro is taken in by Service centre people to run test etc and I will be informed the next day if they accept it as a fault or not ?
    I feeling ridiculously bad.

  • IMac G5 Graphic Card Replacement for blue screen problem

    When I turn on iMac, I only see blue screen, the apple technician said Need to replace graphic card,  Nvidia Gforce 7600GT 256.
    1, can it install in IMac?  Seem like it work for PC?
    2,  I had blue screen problem several time,  I think I turn on iMac too long, so it burn out graphic card.
    3,  I have 2007 G5 24" screen model,  is any durable and afford graphic card you recommend?
         Where to buy for cheaper price?
         Do I need to change mother board?
    4,  can I replace it by myself?  Any picture or video for graphic card replacement?
    Thank you.

    If you look around, you might be able to find someone who will replace just the chip on the graphics card, which is what usually fails. It will take someone highly skilled; they really have to know what they're doing--it's not an ordinary soldering job.
    Here's someone who found a non-Apple service to do this, and it proved to be far less expensive than a full logic board replacement. But I think this was in the UK.
    https://discussions.apple.com/thread/4996559?start=0&tstart=0
    I have no personal experience with this outfit, but you might check them out.
    http://dttservice.com/

Maybe you are looking for