2nd Attempt at a Solution

This is a second posting of this question, in hopes that someone that can help me missed it the first time:
I recently had a bad situation with an external HD. The drive "crashed" and was not mountable among other problems. After paying to get the drive "back" I decided to buy an additional drive to back up all my photos. I went to copy the files from the recovered drive to the new one. I kept getting errors saying that file xxxx.jpg could not be copied because of an error. I forget exactly what the error was, but I seem to remember it being a corrupt file issue. Is it me or did the finder used to allow you to skip bad files during a copy process? This is a real pain. I've got hundreds of folders and thousands of images I'm trying to back up. I know there's some issues with some of the files due to the "crash" of the drive, but it doesn't make sense to me why I can't skip those bad files and continue to copy all other "good" files. Are there any applications that will help solve this? I don't want to have to dig many folders deep to figure out what has copied and what has not copied after it runs into a corrupt file and halts the entire copy. Thanks in advance for any help.

Hi Chris
+Is it me or did the finder used to allow you to skip bad files during a copy process?+
The files you are getting Finder to copy are probably damaged as a result of the hard drive failure and cannot be compared to a normal file copy functioning expected of Finder. At least Finder is picking up that they are damaged, but in order o create some kind of distinction between these good and bad files, you would need to know what the distinction is.
What is Finder's definition of a good file and a bad file?
For example, does one of these damaged files still show in say, Photoshop yet may be truncated? Or, if it missing the header information then it will not be able to be opened in any viewer application. If this is the case and investigation show malformed or missing header info, then you could use that as the defining criteria to weed out those files using a terminal command like grep for example.
regards roam

Similar Messages

  • [svn:fx-trunk] 9419: 2nd attempt to check in prototypes of ControlBars in Panel and Application , Spark Containers in Halo Navigators, Halo ViewStack in Spark ButtonBar.

    Revision: 9419
    Author:   [email protected]
    Date:     2009-08-20 09:19:04 -0700 (Thu, 20 Aug 2009)
    Log Message:
    2nd attempt to check in prototypes of ControlBars in Panel and Application, Spark Containers in Halo Navigators, Halo ViewStack in Spark ButtonBar.  APIs should match spec but are subject to change from PARB.  Skins are subject to tweaking after XD review
    QE Notes: The following tests will fail and need updating:
    gumbo/containers/Panel/Properties/Panel_Properties_position Panel_Properties_rotate
    apollo/spark/components/Window/properties/window_properties_titleIcon_tests titleIcon_test8
    Doc Notes: None
    Bugs: None
    Reviewer: Darrell, Glenn, Ryan
    API Change: No
    Is noteworthy for integration: No
    tests: checkintests mustella/gumbo/components/Application, gumbo/components/ButtonBar, gumbo/containers/Panel, apollo/gumbo/spark/Window, containers/ViewStack, containers/Accordion,
    states/Integration/TabNavApp, states/Reparent
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/airframework/src/spark/skins/spark/SparkChromeWindowed ApplicationSkin.mxml
        flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/NavBar.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/core/Container.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/events/FlexEvent.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/FocusManager.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Application.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/ButtonBar.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Panel.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/SkinnableContainer.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/ApplicationSkin.mxml
        flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/PanelSkin.mxml
        flex/sdk/trunk/frameworks/projects/wireframe/src/spark/skins/wireframe/PanelSkin.mxml
        flex/sdk/trunk/frameworks/spark-manifest.xml
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/ComponentBuilder.jav a
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/StandardDefs.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler_en.properties
    Added Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/mx/core/IDeferredContentOwner.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/core/INavigatable.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/core/INavigatorContent.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/NavigatorChild.as
    Removed Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/core/IDeferredContentOwner.as

  • Adding a 2nd device to the Solution Center software

    I have and Officejet 6500 with the Solution Center software.  How can I add another HP printer to the software?  At one time they both showed up, but I had problems with the driver and when I reloaded it, the second printer was gone and hasn't come back.

    Hi,
    Since this printer uses a different software it cannot be added to solution center.
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • 2nd attempt--Cannot Install E-Learning Suite 6.1--Even as New Admin Account

    PLEASE HELP ME FURTHER WITH THIS UNRESOLVED TECH TICKET ISSUE
    CANNOT INSTALL ADOBE ELEARNING SUITE 6.1
    Adobe เคสอัพเดท : 0185404686 : Mohammed U
    บัญชี Adobe ของคุณคือ [email protected]
    หมายเลขเคสของคุณคือ0185404686
    การบรรยายลักษณะเคส:Chat:Installation Help (CH13860513)
    You contacted us as you were unable to install e-learning suite. We suggest you to create a new Admin account on your computer and try installing creative cloud desktop from there. Once you are able to install and launch on new admin account you will be able to access it from your normal admin account as well. Refer this link to create new admin account
    http://support.apple.com/kb/PH4600
    Hello,
    Thank you for your reply. However, YOUR solution did not work.
    I created a completely new admin account. Everything was fresh -- totally virgin. And, exactly the same occurred. The installer program completed about 50% of its run,and then froze up. It failed to initialize, and I was referred to an onsite help page that has been discontinued ... that is no longer supported.
    What can I do?
    I have purchased AN EXTREMELY EXPENSIVE DVD from Adobe, had it sent to me in Thailand, and it will not install in my computer.
    Please provide me with the technical support that I need.
    Thank you.
    Neal Davis

    Hi There,
    Can you confirm your operating system on which you are trying to install e LearningSuite 6.1?
    Also confirm the PowerPoint version present on that machine?
    Regards,
    Ajit

  • Error Message when attempting to install Solution Centre for HP OfficeJet J5780

    Hi,
    Each time I try and install the HP Solutions Centre software for my Office Jet J5780 on my laptop (Microsoft Windows Starter 7 32Bit) I am confronted with the following error message:
    "Micorsoft Visual C++ Runtime Libary
    Runtime Error!
    Program: C:\Users\.....
    This application has requested the Runtime to terminate it in an unusal way.
    Please contact the application's support team for more information"
    Any help would be much appreciated!!

    Hello Sophia10,
    Welcome to the Forums!
    I noticed your post about the Runtime Error you are getting when you try to install your printer. I have a few suggestions to hopefully get it installed and working for you.
    First of all, I would suggest performing a clean boot:
    How to perform a clean boot in Windows
    Next, try reinstalling the printer:
    HP Officejet Full Feature Software and Driver Download
    If the installation still does not work, try this:
    Running Microsoft's Fix it tool, which will fix corrupted registry keys, etc:
    Fix problems that programs cannot be installed or uninstalled
    Try to reinstall the printer again.
    Please let me know how this goes! Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • When attempting to print Solution Center opens and says 'printer is off-line'.

    The printer prints a test page OK when I go to Control Panel, Preperties, Print Test Page. Surely this requires the printer to be on line.

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • 2nd ATTEMPT AT GETTING ANSWERS  HERE _ PLEASE HELP!!!!!!!!!!!

    PLEASE would SOMEONE assist me!!!!!! I am 3 Days in with Whiteboxes where clips or video should be playing!!!!!  I am a 32 bit OS, Win Vista (SP2) 
    I have unistalled and reinstalled Flash from the sites I have found posted in other threads in this forum with similar problems as mine- the most recent 20 minutes ago from the link fpdownload.macromedia.com
    I have gone to the tool through adobe that checks the latest version you have, it ALWAYS says it's installed.
    I have updated all drivers(Nvidia) as well as Browser updates for Firefox and Chrome, and installed newest Java and the other Adobe plugins.
    I have checked my firewall, it is allowing all
    I have gone into the flash manger, it is allowed to store
    I have even signed up here in this forum to try to get some help....
    In other threads, there was information about deleting old Flash files in the Macromed Folder but it appeared to be a workaround for people using IE which I do not, I use Firefox and sometimes Chrome? Would I need to do this anyway??
    I have been able to watch clips in youtube? with no problem>>>>>but game sites or facebook games for example load everything except the imgae for the game - just blank - no message that plugin failed, if I right click while it's attempting to load I can not get flash manager box only a script box that says
    Movie not loaded
    About Adobe Flash Player 10,3,183,10
    ANY ASSISTANCE IS APPRECIATED!!!!!!
    that is the screen I have seen for 3 days when checking - all was fine until Friday when I updated Flash - have not been able to view/play since.
    Any addtl info needed please let me know - THANK YOU IN ADVANCE

    May have almost solved? 
    Used the standalone uninstaller again from link in a previous forum answer - turned off firewall (CA Security Suite version 7.0.0.279)
    Went to Adobe through link to confirm uninstalled - installed newest version from Adobe Version 10.3.183.10 
    Confirmed install at Adobe, flash plays and newest version in shown installed in small white box.
    THEN with fingers crossed, again attempted to go to site where content would not load....worked!!!! although I did have to REload page 1x
    If possible could someone tell me if the firewall was what prevented the actual upload of all activeX?  Note! I never had an error message that prev attempts did not install, and was able to view some content? Also noted currently in the macromed folder I see the icon for FlashUtil10x_Plugin - previous times there was initials like cccd aih? after the description, was this a factor as well?
    Thank you again if anyone sees this and can answer
    Again OS is Win Vista 32bit sp2, Firefox version 6.0,

  • Can send text message to one person (2nd attempt)

    I accidentally marked an answer as the correct solution and can't unmark it so I'm trying again.
    I have a 4-S and whenever I try to send a text to  one particular number, the number comes up green (instead of blue or black) and the message doesn't get sent.  Below, in red, it says "Not Delivered"  Any thoughts?  Any way I can fix this?
    And, yes, the iMessage setting is on.
    iPhone 4S, iOS 7.0.4

    Try deleting all of her contact information from your phone and any existing message threads. Reset the phone by pressing and holding the Home and power buttons until the silve apple appears. Then, when the phone has restarted,  add her contact information back.

  • 2nd Attempt at an Answer - Originally posted April 16th

    My e-mail is thru Cox Communications. Depending on the situation, my MAC will attempt to send e-mail thru the MAC Mail....and fail ("The certificate for this server is invalid"). Is there a means to sync up (?) my MAC e-mail so when it wants to send it via MAC it can and when it wants to send it via Cox it can also?
    Thanks,
    Bob
    Message was edited by: Bob13018

    Lacking a lot of understanding of how a computer works, I hope this clarifies. Cox is my internet server. I also use it for my e-mail ([email protected]).
    Here's an example of what I'm facing. Fired up the net, opened up a local newspaper web site, tried to e-mail a newspaper article to a friend. My MAC opened up Mail and tried to send the article - unsuccessfully. Would have preferred my MAC trying to e-mail the newspaper article via my Cox email.
    Actually, I'm not opposed to sending the article via Mail but not sure why it won't do so -as I mentioned in my first message, keeping getting a message about a invalid certificate. Also get a message that both Mail and Cox are off-line (?)

  • Final attempt at a solution ... broadband drop out

    Perhaps someone can help before - now being contract free - I leave BT.
    For the last 9 months or so, we find ourselves unable to use our broadband connection without rebooting the hub.  We have replaced the ADSL filter countless times, have used the test socket, have had the line checked, have left the thing unrest for 10 days (going without internet), had the noise adjusted up and down, I have used each and every wireless channel.  When things go wrong, no lights on the homehub (incidentally, HH2, but I have also used a HH1 without luck) change and all looks normal but we find ourselves unable to connect.  The connection mostly seems to go in the evening, but it's also been hopeless this afternoon (for example), most recent afternoons and also on Sunday mornings.  In effect, there is no pattern...  To get going again, all we have to do is reset, but that's not exactly convenient.
    I asked about 9 months ago for a change to HH3 in case that helped.  I don't think it will.  I am currently using a linksys modem and router to see what happens - guess what? same problem!  Interestingly, when it goes down, the modem lights again suggest there is nothing wrong with the connection.
    BT have now worked out my contract is up and are telling me to recontract and negotiate to receive a HH3 - yes, I have to negotiate to get one despite always and for ever being with BT. If the problem persists, they will see what they can do.
    Of course, I have no intention of getting stuck with a new contract for a piece of equipment that won't solve the problem.  But I am also rather reticent to leave BT - not least because to have any confidence of not suffering problems in future, I think I need to move away from using the same phone line which means going cable...
    Does anyone have any ideas?  I attach my latest status report from my linksys modem...
    Thanks!
    GBH1000

    Hi.  Thanks for coming back.
    I haven't solved anything - including previous error probs - but life was very hectic and while I allowed the contract to tick down, I reset the hub twice a day and coped.  I've only been waging a final battle because it feels like a big risk switching providers if this can be fixed...
    Here are the latest stats.  As you can see I have reinstalled the BT HH2 because my wife uses the BB talk facility some evenings (including tonight) and it's easier to use the hub.
    Anyway - here you go.  These numbers mean nothing to me.  Interestingly, I have NEVER been asked about them by anyone at BT either!

  • 2nd attempt for response!!! Please Help!!!!!

    I have been running iTunes with no problems until today. I downloaded the new version (v7)the day it came out with no problems. When I tried to open iTunes today it froze. I closed the program reopened and it froze again. I have tried deleting all iTunes files including my ipod off the computer and re installing to no avail. Nothing seems to be working. I am not getting any error messages. The only thing strange is when I open itunes it starts off as a black screen and then fills in. This never happened before. The music will play for a little bit and it too quits. When it freezes it causes my entire computer to stall. Please Help! When I close itunes by task manager it only says, "iTunes not reponding." Please HELP!!!!!!

    NEVER MIND I FIGURED IT OUT ON MY OWN!!!!!!!!!

  • Help!  I tried downloading version 10.6 off the website rather than through my current iTunes software.  The first set up was not successful, 2nd attempt-chose repair. Now I just receive a warning everytime that the entry point cannot be found.

    Full details:
    When I click on any iTunes program link, I receive the following warning "The procedure entry point AVCF AssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVFoundationCF.dll."
    I click ok and it tells me "iTunes was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 127)."  I tried reinstalling twice through a repair and this has not been successful.  The only other option available is to remove the software off my computer than (I assume) start again.  This makes me nervous as I fear I will lose all the songs and videos previously purchased.
    I cannot find my original iPod which is why I purchased a new one today.
    Grateful for any assistance or expertise!

    I receive the following warning "The procedure entry point AVCF AssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVFoundationCF.dll."
    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • On the 2nd attempt, its alive

    To start with when i installed it i kept getting 'page cannot be displayed' when trying to run the homepage. As i am british i assumed all the foreign language stuff shouldnt affect me so i uninstalled and reinstalled and now it works. The only thing i changed was creating a bit more space.. i only had around 1gb free before and i used a different system password although this was still 6 alpha chars. Does the installer check for required space before trying to install because i didnt get any warnings.
    im running xp with sp1 btw

    ok i just turned my box on after turning it off last night. i tried to load XE and was greeted with the page cannot be displayed error again. i tried stopping and starting the db a few times and after about 3 or 4 tries i managed to reach the homepage.
    Is it flakey for other people?

  • 2nd attempt pdf export:  I.O. error - in use by another process.

    I am using vb.net 2008 with the bundled crystal reports.
    I open a report in a CR viewer and have a button to export the rept to pdf and then email it. (using the DiskFileDestinationOptions() and rpt.exportoptions)    All works fine.  However, if user presses the button to do the email again (same rpt is still in viewer), I get the error:
    system.IO.IO. exception.  The process cannot access the file (myfile.pdf ) because it is being used by another process.
    I found a post that said to close the report and the DiskFileDestinationOptions after the export but that does not solve the problem.  I think it relates to the email with the pdf as an attachment. 
    The only way to solve this so far is to exit the viewer and create the report again.
    What can I do to leave the viewer open and email more than once.

    As an FYI for anyone that may find this thread while searching for export to mapi. I am copying a link to a blog that has the code for export to mapi:
    https://www.sdn.sap.com/irj/scn/weblogs?blog=/cs/junior/view/wlg/12157
    Ludek

  • Internet Explorer has stopped working (2nd attempt to fix this)

    Hello,
         Ever since I upgraded to Adobe Flash Player v-10.2.159, I get the error "Internet Explorer has stopped working" when I close a tab.  It doesn't happen every time, but sometimes when I have multiple tabs open.  And it only happens when I have Adobe Flash Player add-on enabled.  I am using Windows Vista Home Premium and IE8.
         Thanks in advance for your help.

    I have a similar problem which happens whenever I walk away from the computer for extended periods (overnight, for example) and leave IE open with a tab logged onto http://www.nytimes.com.  Doesn't matter if the NY Times tab is "on top" or if it is one of many inactive tabs; I jiggle the mouse in the morning to wake up the screen (power saving mode: screen only) and the error message is right there on top waiting for me.
    I know it is the NYTimes tab which is crashing because IE always offers to recover the crashed tab.  I always have multiple IE browsers running with multiple tabs on each, many of which contain Flash objects.  However, crashes only occur with the NYTimes site.
    I can find lots of these in Event Viewer; here are just a few:
    Faulting application name: iexplore.exe, version: 8.0.7601.17514, time stamp: 0x4ce79912
    Faulting module name: Flash10d.ocx, version: 10.0.42.34, time stamp: 0x4ae7baed
    Exception code: 0xc0000005
    Fault offset: 0x0011294f
    Faulting process id: 0x878
    Faulting application start time: 0x01cc06745175ad0a
    Faulting application path: C:\Program Files (x86)\Internet Explorer\iexplore.exe
    Faulting module path: C:\Windows\SysWow64\Macromed\Flash\Flash10d.ocx
    Report Id: 2d204abe-75e7-11e0-ba45-001bdc0fdeb9
    Faulting application name: iexplore.exe, version: 8.0.7600.16700, time stamp: 0x4cd23213
    Faulting module name: Flash10d.ocx, version: 10.0.42.34, time stamp: 0x4ae7baed
    Exception code: 0xc0000005
    Fault offset: 0x002054be
    Faulting process id: 0x2060
    Faulting application start time: 0x01cbc959fa124fbb
    Faulting application path: C:\Program Files (x86)\Internet Explorer\iexplore.exe
    Faulting module path: C:\Windows\SysWow64\Macromed\Flash\Flash10d.ocx
    Report Id: eb38d561-35af-11e0-97ee-001bdc0fdeb9
    Faulting application name: iexplore.exe, version: 8.0.7600.16700, time stamp: 0x4cd23213
    Faulting module name: Flash10d.ocx, version: 10.0.42.34, time stamp: 0x4ae7baed
    Exception code: 0xc0000005
    Fault offset: 0x00218f8b
    Faulting process id: 0xfa8
    Faulting application start time: 0x01cbbbee85351097
    Faulting application path: C:\Program Files (x86)\Internet Explorer\iexplore.exe
    Faulting module path: C:\Windows\SysWow64\Macromed\Flash\Flash10d.ocx
    Report Id: 9408eee7-2a3e-11e0-a82c-001bdc0fdeb9
    Faulting application name: iexplore.exe, version: 8.0.7600.16700, time stamp: 0x4cd23213
    Faulting module name: Flash10d.ocx, version: 10.0.42.34, time stamp: 0x4ae7baed
    Exception code: 0xc0000005
    Fault offset: 0x00181bf7
    Faulting process id: 0x1fe4
    Faulting application start time: 0x01cbadb8bb6a6c0a
    Faulting application path: C:\Program Files (x86)\Internet Explorer\iexplore.exe
    Faulting module path: C:\Windows\SysWow64\Macromed\Flash\Flash10d.ocx
    Report Id: 16a281fa-1a08-11e0-8cbb-001bdc0fdeb9 
    Faulting application name: iexplore.exe, version: 8.0.7601.17514, time stamp: 0x4ce79912
    Faulting module name: Flash10d.ocx, version: 10.0.42.34, time stamp: 0x4ae7baed
    Exception code: 0xc0000005
    Fault offset: 0x002f50fa
    Faulting process id: 0x262c
    Faulting application start time: 0x01cbf5170f31989e
    Faulting application path: C:\Program Files (x86)\Internet Explorer\iexplore.exe
    Faulting module path: C:\Windows\SysWow64\Macromed\Flash\Flash10d.ocx
    Report Id: 90a25db9-6169-11e0-bec1-001bdc0fdeb9

Maybe you are looking for