2nd display resolution 1440x900 and cannot be changed!

I have connected a 2nd display to my laptop using Toshiba DynaDock.  The monitor is an Acer S200 with native resolution of 1600x900. Monitor is connected to DynaDock by DVI cable. However I cannot get the monitor to display in 1600x900.  The maximum available is 1440x900. I am sure that when I first plugged in the monitor using VGA that I could get 1600x900 resolution.  At some point this stopped. I really don't know if it has to do with switching to the DVI cable. I am running Windows 8.1.  The S70 laptop has a 17" display at 1600x900. I'm also confused by the display adapters.  The laptop has an AMD Radeon Graphics adapter.  However, it appears that this is not being used.  When I right click on laptop display, I get the HD Intel Graphics adapter control. This adapter has no idea that there is another monitor attached.  It only controls the built in display. I can access the AMD Radeon Catalyst Control center by right clicking on 2nd display, then click Graphics Properties. This opens the AMD Catalyst Control center.  However there is nothing within the CCC that allows me to select a resolution.  If I click Screen Resolution from right click on 2nd display, I get a window "Change the appearance of your displays". This shows 2 monitors. #1 is Mobile PC Display, 1600x900, Landscape, Extend these displays. #2 is "No Monitor", 1440x900, Landscape, Extend these displays. If I open the DynaDock Display Link Manager (version 7.7.60366.0) , I see 2. Dynadock U3.0. This opens a set of options. If I click screen resolution, there is a list of available options.  The list jumps from 1440x900 to 1600x1200.  There is no option for 1600x900.  If I click any resolution above 1440x900, the "Input Not Supported" message appears on the monitor. Once again, I want to display my 2nd monitor at 1600x900 resolution, but I cannot figure out how to do that. Please help. 

You should try checking for software updates from DisplayLink:
DisplayLink: Windows Software

Similar Messages

  • When using facetime it only displays a picture and cannot view myself talking

    when using facetime it only displays a picture and cannot view myself talking. i can call out but the other person cannot view me. what am i doing wrong? how can i fix this?

    See:
    * [[Images or animations do not show]]
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Batch 0000000521 was proposed from initial transaction and cannot be change

    Dear All,
    My business process is we create new batch to replace/substitute the delivered batch when customer return is happen (in outbound delivery process).
    that condition is running well when the return sales order not refer to billing document (billing document for previous sales order).
    But when the return sales order refer to billing document (billing document for previous sales order), the old batch (batch that delivered) cannot change. there is error message when i try to change the batch :
    "Batch 0000000521 was proposed from initial transaction and cannot be changed"
    What should i do fix it ?
    Thanks & Regards,
    Saiful arif

    Hi,
    In T.code VTAF, go to the source and target document type and then go to the item details.
    There you can find a box Donot copy batch, check the box and save.
    Create a new return with reference to billing document and check now.
    Regards

  • I do not find Airdrop logo on my iphone also the location services are locked and cannot be changed.

    I am using an iPhone 5S 64GB 7.1.2 version installed.
    I do not find Airdrop logo on my iphone also the location services is locked and cannot be changed.

    Have you tried a Reset: Hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons.
    If that didn't work try a Restore from your backup in iTunes. If that fails Restore it as a new iPhone in iTunes.
    And if all the above fail, you do not have an employer profile on your iPhone, and there are no Restrictions set, get it serviced.

  • Macbook display unexpectedly changes resolution and cannot be changed

    The internal display resolution recently changed unexpectedly such that I now have 1 inch black bars on both sides of my display and the right, left and bottom edges of all images and applications are not viewable. I have gone to system preferences to change the resolution, but the dialog box for changing the resolution pops up far to the right and off of the viewable screen to the point that I am unable to select a different resolution. I have not installed any new hardware or software recently and did not change the resolution, this problem occurred spontaneously. I can see the edge of the display resolution settings box, but I am unable to drag the box to the viewable screen or select any of the other resolution options. Help!

    Try starting in Safe mode and see if the screen boots into a normal resolution when starting safe. If it does, change the resolution to something not native that still is useable. Then restart normally and see if the problem is gone. If so, set the resolution back to what it should be (1280 x 800).
    http://support.apple.com/kb/HT1455

  • Default PXE Boot.wim "stuck" and cannot be changed

    We would like our default PXE boot.wim to be the x64 boot.wim. Somehow, it has been changed to x86 and it cannot be changed back. I am aware of the method by which config manager chooses which disk to use (last deployed TS to a collection), but despite creating
    multiple deployments utilizing the x64 disk, it is still defaulting to the x86 one. We have 2 main collections that TS's are deployed to, and both of them have a most recent deployment using the x64 disk.
    Anyone have any ideas what is going on, or where I can look to get this changed?

    Hi,
    Do you mean the clients are still trying to boot from the x86 iamge?
    You referred that you have deployed task sequence via the iamge. Is the task sequence still bind with the image?

  • HELP!?! My iPod nano 4GB suddenly just displays an apple and cannot connect

    Suddenly my iPod just displays an apple and even i reset the iPod the apple vanishes and reappears. when i connect it to my computer iTunes does not find it and even i try to update software, the hardware is not found.
    is there any chance to fix that and safe the music on my iPod??

    See these.
    iPod shows only an Apple logo and doesn't start up.
    Only the Apple logo appears when turned on.

  • My daq card PCI6025e' digital ports PA,PB,PC are in high state and cannot be changed even in MAX 2.1 testing panel and continuously output 5 volts even set for output.

    my digital ports PA,PB,PC are in high state and cannot be set low even if it is set for outputs.
    Thanks

    The MAX utility is the closest to the driver level and will eliminate software configuration as a possible issue. Please disconnect anything that you have connected to the DIO lines.
    Use the MAX test panel for your DIO lines, configure them as outputs, and set them to a low state. Use a multimeter (DMM) to observe the line state. If it is still high then you may have a problem with your hardware. If this is the case, I advise calling National Instruments support and investigate a possible RMA (repair).
    Best Regards,
    Justin Britten
    Applications Engineer
    National Instruments

  • Since recently, Firefox is displayed in English, and cannot be switched to another language

    I used to use Firefox in a non-English language (apologies but I am not much of a linguist). Since a couple of weeks ago Firefox always displays in English, though under "Tools" / "Languages" the item "German" appears as selected. Switching to English explicitly and switching back to German does not help.
    I am using Ubuntu 10.04, and my system language is Esperanto. Firefox used to display in that language. If it is no longer available I would prefer German.

    In the past two weeks I did a bit of research but not to much avail. I noticed I had the "Locale Switcher" add on installed, and deactivated it. Switching languages in the "Languages" tab of "Add-ons" still did not work (yes, I restarted every time). I installed the "'''Quick Locale Switcher''' 1.7.4" extension (yes, I restarted), and it displays a number of locales in the "Tools" menu; still choosing one has no effect (yes, I restarted).
    Then I juggled with Quick Locale Switchers "options", which actually displayed in Esperanto (so I cannot tell you what they say in English). I check the first one (saying more or less that locale switching should affect the user interface) and switched to German (yes, I restarted) -- and '''it worked'''! I switched to Esperanto -- and Firefox went to ... English!
    After a lot of searching in the Web I found on "[https://addons.mozilla.org/en-US/firefox/addon/esperanto-language-pack/ https://addons.mozilla.org/en-US/firefox/addon/esperanto-language-pack/]" that this pack is "'''Not available for Firefox 3.6.16'''". That might explain something (not everything); probably I lost my language when I upgraded from 3.5 to 3.6.
    Here a little error message could save people hours of their lives...

  • File Associations Did Not Update and Cannot Be Changed To Photoshop CS6

    Changing a file association is a simple matter you either do it in Windows Explorer in the properties or just use the edit in command in bridge.
    Except that neither is working.
    Photoshop CS6 is not even showing up as an option in either Explorer or in Bridge but it is ironically working in Lightroom.
    So again before someone doesn't bother to read this: I know how to change file associations.  I know the normal steps and it should be easy.
    It is not working and it is a pain in the you know what.

    Yes I've been through it pretty thoroughly.
    It seems Photoshop failed to register itself when installed so now "maybe" if I redo all of the installations including Alien Skin, OnOne, DxO, etc it might work?
    This is really irritatingly buggy.
    It does not even show up as an option anywhere in Bridge presently that i can see.

  • After Installing Premiere CC Update Icons and Worksurface became too big and cannot be change in small

    Hi, ich have installed the new Cloud Update of Premiere Pro CC today. Well, I canot understand, why all Icons are too big now and I cannot make them smaller. If someone knows what I am talkig about, please help. Thanks

    Hi Mark.
    I have the same problem, but it works when i set the windows settings for the font and icons to 100% instead of 125% (standard) which is not optimal.
    Do you have an other solution?
    My specs are:
    Windows 8.1 laptop X4578 15,6'' gaming bærbar | MM Vision
    1920x1080 screen
    Intel Core I7-4710MQ
    Nvidia Geforce GTX 870M with geforce 344.11 driver (the latest)

  • Iphone 3gs displays no service and cannot activate

    I cannot afford a smartphone, so my friend has given me his old iPhone 3GS when he upgraded to a newer model.
    the phone has obviously been wiped so that it's as if it just came out the factory.
    I enter the language, WiFi network info, etc. have also tried multiple WiFi hotspots, including my home Netgear/AOL, parents Huawei/TalkTalk and a pub's technicolor/plusnet.
    whenever i try to activate it, the top bar says "Searching..." and then eventually "no service", and i get a message saying the activation server is unavailable, and have tried again and again to no avail. have tried powering off, removing and re-inserting the SIM, then powering up - same errors. the SIM pins appear all present and not broken/bent etc when I look into the device.
    All I can say about the make/model is that it's an iPhone A1303, so it's a 3GS (Identify your iPhone model - Apple Support) . 16GB capacity.
    I have no way of knowing the iOS version, IMEI or baseband revision (unless there's a mac/iTunes way of getting it?)
    my friend is certain that he has never jailbroken the device, and that it has always been on O2 (the same network as me).
    my SIM works in my old Nokia, receives texts/calls etc. my Nokia gets all 4 bars of signal.
    I have also been in to visit an O2 shop, and had my tariff upgraded to one for a smartphone. They're certain it's not an O2 problem. I've probably had this SIM at least 8 years.
    Have tried activating it by itself, and via iTunes 10.6.3(25) on Mac 10.6.8. iTunes says there is no SIM installed.
    is the phone somehow blocked? how would i find out if it was? is it possible that it has been hacked to support O2 instead of another network (by a shop) - and that by scrubbing the data, it has wiped out the hack (in which case, how do i get the phone's ios/baseband/IMEI/original network)? is this a really silly thing like having to deactivate my old phone or having to register the iPhone with O2? is this a problem with the SIM, the phone hardware, the firmware or iOS? what if i got his old SIM - would that activate the phone, and is the phone just not accepting a different SIM than the original one?

    Here's what you do
    1.Make sure your phone is not plugged into the computer.
    2. Put the iPhone into recovery mode (this is NOT DFU mode). Do this by
         a). Hold down both the power/sleep button and the home button until the screen turns black/off
         b). As soon as this happens release the power button but NOT the home button
         c). If done correctly then the Apple logo will appear, KEEP HOLDING THE HOME BUTTON and eventually a connect to itunes graphic will appear. You can release the home button
    3. With the connect to itunes graphic on the screen, plug your phone into the computer. iTunes will start up if it is not already on, and then will say the phone needs restoring. Ignore this and COMPLETELY quit iTunes.
    4. With iTunes off and the graphic still on the phone screen, hold down both the power/sleep and the home button again for 9 seconds (count 100, 200, 300...) or until the screen goes black
    5. When the screen goes black release the home button straight away.
    6. It will start up with the iPhone activation screen ignore this. iTunes should have started up, if not do so. Go to the iPhone tab and either resotre from backup or set up as a new phone.
    You're welcome

  • Decimals identified by dates and cannot be changed?

    Input decimals like 1.29, it's always indentified as date. I tried to change the cell format to Numbers, it still doesn't work.
    If I input '1.29, it would be OK. But is there any other way to change the format in bulk?
    Thanks...

    Once Numbers has determined a cell has a date in it, it wants to stick with it. You can change it to text, though. Format these Date & Time cells to show only the month and year (1.29 not 1.29.14) then change them to text.  But to get them into actual numbers, you probably will need to do as Wayne said and go to System Preferences first.  I don't know if it is your date format or number format that is the problem or maybe both. After you get that worked out, you can go back into Numbers and format those cells with a number format. In my localization (US) I don't have a date format that uses dots between the numbers so I can't test all this out.
    Also, when you enter a number as  '1.29 you are entering it as text.  Some formulas will interpret it as a number, some will consider it to be text and will ignore it.

  • HT1296 When synching Outlook Contacts and calendars with iTunes for Windows, I do not get the option to "Synch Contacts with". It says, and cannot be changed, that it is synching with iCloud.  How do I get iTunes to give me an option other than iCloud?

    Using iTunes for Windows to synch my Outlook Contacts and Calendars into my iPhone 5, with the iPhone Device designated and in the Info tab, I do not have the option to "Synch Contacts with", but have an unchangeable message that it is synching with iCloud. How do I create that option to synch with Outlook?

    Hi there,
    I would recommend taking a look at some of the troubleshooting steps found in the article below.
    iPhone, iPad, iPod touch: Troubleshooting contact and calendar syncing via USB on Windows
    http://support.apple.com/kb/HT1692
    -Griff W.

  • Budget has amounts that are locked and cannot be changed?

    Wrong Forum.
    Reposted in E Business Suite
    Message was edited by:
    mrobby

    Have you tried a Reset: Hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons.
    If that didn't work try a Restore from your backup in iTunes. If that fails Restore it as a new iPhone in iTunes.
    And if all the above fail, you do not have an employer profile on your iPhone, and there are no Restrictions set, get it serviced.

Maybe you are looking for