2nd gen apple tv not streaming after last software update

I have 2 2nd gen apple tvs. I updated the software to 5.0 on one but not the other. The updated apple tv is having streaming issues with my purchased content. Netflix will stream but not my purchased tv shows or movies. Anyone else having this issue? I tried a reset but that didn't work. And my other apple tv which i didnt update is working fine. Any advice would be appreciated. Thanks!

Damian,
Thank you for taking the time to respond and no chance I thought that was rude. Unfortunately I had already reset and rebooted prior to posting. Also I have another 2nd gen apple tv and I stream netflix all the time as well as amazon prime and am not having issues so it's not my connection. The only difference between my two apple tvs is that I upgraded the software on one (which now isn't working right) and not the other which is still functioning well! So I am curious if anyone else has experienced this and has a solution.
Thanks again for your ideas and if anything else occurs to you, ping me!

Similar Messages

Time Capsule not working after last software update

I bought my time capsule 3 weeks ago. Set up and worked like a charm (I use airport express for my wireless network). After I downloaded the latest software updates a week or so ago, I got a message that my computer could no longer recognize my time capsule. Since then the time capsule light only flashes amber and wont appear in airport utility.
Any ideas?
Thanks

I was having problems with the 7.3.1 firmware as well. For me, in manifest as though the internal disk had went bad--a blinky amber light and a "Disk needs repair" error. Rolling back the firmware solved it for me.
To do this:
--Open AirPort Utility.
--Click on your TC.
--Click on the "Manual Setup" button.
--When the configuration summary pops up, click on the word "Version".
--From the "Upload" drop-down list that is on the new pane that pops up, select "7.3", and click "Ok".
--Once it reboots, it'll be at 7.3.
Hope this helps. I'll be waiting a few weeks after 7.3.2 comes out to upgrade. I'm not real impressed with 7.3.1. As far as I can tell, it broke more than it fixed.

Drag and Drop not working since last software update

Drag and Drop not working since last software update - this is occuring on Outlook for the mac and I just tried moving an icon on the doc and the same thing occured. YOu can drag but the items will not drop.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

2nd gen apple tv not seeing entire iphoto library

Here's something weird - anyone know why I can't see my entire iPhoto library on my 2nd gen. Apple TV?
I have my entire library shared in iPhoto
I have home sharing turned on in iTunes and am signed in using my Apple ID on the apple TV
I see my whole iTunes library and am able to stream movies etc to Apple TV
What's weird is only certain (two) events show up in the Photos section under "Computers" but when I select computers/photos it says "my iTunes." ALSO, when I go to iTunes/devices on my computer, I don't see my 2nd gen Apple TV listed - only my 1st gen Apple TV...
Any ideas out there, Apple Gurus???
Thanks!!!

You select the photos that are shared to your Apple TV from the advanced menu in iTunes.
Apple TV 2 is not intended to show up under the devices list in iTunes.

2nd. gen Apple TV not connecting to wi-fi network

Our 2nd. gen Apple TV has been working fine for years but suddenly (I suspect since the upgrade to software v. 6) it has trouble connecting to our wi-fi network, Whenever I turn it on, it says that "Apple TV can't connect to the network," even though when I look at the network settings, it shows the network and full signal strength. All of our other wireless devices work just fine with the network. Restarting it doesn't solve the problem, nor does uplugging it, or resetting it. The only thing that works is to reset the router (we use Time Capsule). Once we do that, everything works fine again. But then the next time we use it, it displays the same message when I turn it on and I have to go through the same steps all over. I don't really want to have to reset the router every time I want to use Apple TV.
I am running 6.0.1 on Apple TV and have the latest update on Time Capsule. Any ideas on what the problem might be and how I might fix it?

My problem solved itself. I think the problem was a conflict between my Apple TV and a printer on my network. For a completely unrelated reason, I had to remove the printer off the network. Once it was gone, Apple TV has been working fine. So, you may want to try removing other things from your network and see if that solves the problem. It was just a fluke that I figured it out.

IWork (Pages) does not work after last system update!

since some days (after last system update) iWork programms are not starting any more!
macosx 10.7.5 new update
solution atemd: cancel p-ram and p-list, re-installing iwork from DVD and update it from http://support.apple.com/kb/DL1563
macbookpro 2.53 ghz intel core 2 duo, 8 gb ram
any body an idea what i can do to fix it?

hi - i think you should not use 'xhost +' - it's not secure and you shouldn't need it....
in your .bashrc or .cshrc or whatever, you should have setenv DISPLAY .0 or the equivalent export...
then ssh -Y hostname should be all you need... no xhost, and not setting DISPLAY every time...
could you enter the following command from a terminal window and post back the results?
grep X11 /etc/ssh*_config
cheers

CAN'T ACCESS MY MUSIC ON I CLOUD THOUGH I HAVE I TUNES MATCH ON MY 2ND GEN APPLE TV I HAVE UPGRADED THE SOFTWARE ALSO

Cannot access my music on i cloud through my 2nd gen Apple TV, though i have upgraded the latest software n subscribed for i tunes match

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Sign out and back in to your iTunes Store account.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore)

My MacBook pro did not restart after the software update

My MacBook pro did not restart after the software update

Kappy wrote:
Now, were I a mindreader this wouldn't be an issue, but unfortunately, I'm not.
WHAT??? Now that's a disappointment! I was sure the all-seeing, all-knowing Prof. Kappy would instantly discover the problem thru time and space....
Ok, back to the issue at hand, the Prof. is right. In none of the OP's participation, nor in any of his choir of followers save mommy power is there the least hint of what Apple product is failing. While y'all get a move on and disgorge the details, may want to try a Safe Boot. Hold down the Shift key prior to the startup chime and wait awhile. IF it starts, then it means you have some third-party software that's causing the problem. Else there's a strong probability a complete reinstall will occur in your near future.
In the future and in spite of what some purists may say, be sure to service the system disk BEFORE patching. By "service" I mean booting up the Mac using your Install DVD (Snow Leopard or priors) or booting in Recovery Mode (Command R, in the Lions and successors), running the Disk Utility found in that mode and doing a Repair Disk and Repair Disk Permissions. Until NO errors show up. Cause patching up an already damaged system will only make things worse.

Problems restarting iMac with iPod plugged in after last software update

Hi everyone,
I have an almost 2 year old 24" iMac Intel, running OS X 10.4.11 and a 30gb iPod video.
I've been having problems with restarting after the last software update. When I went to restart my computer as required for the update, it shut down, started up (the start up sound came on) and then went to just a blue screen for about 10 minutes or more. I got worried and shut down by holding the power button. Then I turned it back on and the same thing happened. So I shut down with the power button again, unplugged my iPod and external HD, turned the computer back on, and everything started up as normal. So I figured it had to do with one of those. I found that when I've started up with the external HD plugged in everything is fine, but every time I restart with my iPod plugged in, the same thing happens!
This has never happened before, and I've never had problems with my iMac before this... Can anyone help?
Thank you!

Hi, try-> System Preferences->Start Up Disk->ensure OS is highlited.
Some Macs find it difficult to Start/ReBoot when an iPhone or iPod is connected, it's as though the computer is searching to boot from an external HD. I would Repair Permissions & do the SMC reset.
Leave the iPod/iPhone unplugged @ reboot...L

Hi there can anyone help as i am unable to contact Apple for support with my printer which will not print after recent software update? this is the email i tried to send to apple with no success, can anyone help please.......Dear Apple, I'm pulling my hai

Hi there,
Can anyone out there help, after a recent Apple software update my Epson Stylus Photo RX640 will no longer print, every other aspect of the printer works fine including the scanner but it just will not print, I sent an email to apple but all i got was an automated reply directing me to their support page, the email i sent is below this explains in full what the problem is & what i have done to try & fix this problem.
Dear Apple,
I'm pulling my hair out after a recent software update from apple, since this update my Epson Stylus Photo RX640 will not print, every other function of the printer including the scanner works fine,
Please see attached file of the error message coming up in the print queue.
I have spent days trying to fix this, i have been onto Epsons website & followed their resolution for this error message to no avail, after contacting them again with the results i got an email back saying : In response to your email, the RX640 will use an inbox or gutenprint driver on Mac OS X 10.6.8, it is not compatible with an Epson driver.
I have also tried re-installing drivers from original Discs for the printer but it still will not print, obviously this error has been caused by Apple's latest software update, when are Apple going to fix this problem? i need my printer working ASAP.
Regards
Brian
PS i obviously can't attach the error message so here it is: Error:/Library/Printer/Epson/inkjetprinter 2/filter/rastertoescpll.app/contents/mac os/rastertoescpll/failed
Thank You all in advance
Regards
Brian

It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398

Roundcube not working after last php update [SOLVED]

After the last php update my roundcubemail stopped working. The log-in page loads and after attempting to log in I get the following error:
IMAP Error in /usr/share/webapps/roundcubemail/program/lib/Roundcube/rcube_imap.php (184): Login failed for [email protected] from 192.168.1.1. Could not connect to ssl://localhost:993: Unknown reason (fsockopen() function disabled?)
Last edited by whahn1983 (2014-09-19 18:46:11)

I fixed it yesterday. I modified the PKGBUILD to get the upstream fix.
# $Id$
# Maintainer: Sergej Pupykin <[email protected]>
pkgname=roundcubemail
pkgver=1.0.2.3b55da
pkgrel=1
pkgdesc="A PHP web-based mail client"
arch=('any')
url="http://www.roundcube.net"
license=('GPL')
depends=('php')
optdepends=('python2')
backup=('etc/webapps/roundcubemail/.htaccess'
'etc/webapps/roundcubemail/apache.conf')
install=roundcubemail.install
options=('!strip' 'emptydirs')
source=("${pkgname}::git+https://github.com/roundcube/roundcubemail.git#commit=9a498212446f6c9a186df5652a7625526b590b78"
apache.conf)
md5sums=('SKIP'
'f11b17e2a80b383cde4af963fb307541')
prepare() {
cd ${srcdir}/${pkgname}
sed -i \
-e "s|RCUBE_INSTALL_PATH . 'temp.*|'/var/cache/roundcubemail';|" \
-e "s|RCUBE_INSTALL_PATH . 'logs.*|'/var/log/roundcubemail';|" \
config/defaults.inc.php \
program/lib/Roundcube/rcube_config.php
package() {
mkdir -p ${pkgdir}/etc/webapps/roundcubemail
mkdir -p ${pkgdir}/usr/share/webapps
mkdir -p ${pkgdir}/var/log
cd ${pkgdir}/usr/share/webapps
cp -ra ${srcdir}/${pkgname} roundcubemail
cd roundcubemail
mv .htaccess $pkgdir/etc/webapps/roundcubemail/
ln -s /etc/webapps/roundcubemail/.htaccess .htaccess
mv config $pkgdir/etc/webapps/roundcubemail/
ln -s /etc/webapps/roundcubemail/config config
install -dm0750 $pkgdir/var/{log,cache}/roundcubemail
install -Dm0644 $srcdir/apache.conf $pkgdir/etc/webapps/roundcubemail/apache.conf
# install -dm0755 $pkgdir/etc/php/conf.d/
# cat <<EOF >$pkgdir/etc/php/conf.d/$pkgname.ini
#open_basedir = ${open_basedir}:/etc/webapps/roundcubemail:/usr/share/webapps/roundcubemail:/var/log/roundcubemail:/var/cache/roundcubemail
#EOF
rm -rf temp logs
Then I added these values to my roundcube config:
// IMAP socket context options
// See http://php.net/manual/en/context.ssl.php
// The example below enables server certificate validation
//$config['imap_conn_options'] = array(
// 'ssl' => array(
// 'verify_peer' => true,
// 'verify_depth' => 3,
// 'cafile' => '/etc/openssl/certs/ca.crt',
$config['imap_conn_options'] = array(
'ssl' => array(
'verify_peer' => false,
'verfify_peer_name' => false,
// SMTP connection timeout, in seconds. Default: 0 (use default_socket_timeout)
// Note: There's a known issue where using ssl connection with
// timeout > 0 causes connection errors (https://bugs.php.net/bug.php?id=54511)
$config['smtp_timeout'] = 5;
// SMTP socket context options
// See http://php.net/manual/en/context.ssl.php
// The example below enables server certificate validation, and
// requires 'smtp_timeout' to be non zero.
// $config['smtp_conn_options'] = array(
// 'ssl' => array(
// 'verify_peer' => true,
// 'verify_depth' => 3,
// 'cafile' => '/etc/openssl/certs/ca.crt',
$config['smtp_conn_options'] = array(
'ssl' => array(
'verify_peer' => false,
'verify_peer_name' => false,
It works like a charm.

My iPhone will not start after new software update. Freeze on apple screen

I updated the phone software today through the new software update directly from the phone and it will not restart past the apple screen. I have tried a hard restart, no dice.
wish I had waited.

Got it back up and working by putting in recovery mode and restoring through itunes, but lost lots of settings and app. info. I took about 4 efforts to resync after restore, not sure why, certainly not smooth or intuitive. 2 hours of my life I wish I had back.

Audio volume control in quick start bar not working after last HP update

Volume keys at top work fine but clicking cursor on quick start icon for volume control does nothing now.

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP ENVY 17 Notebook and issues with the Audio after Windows 10 update. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that might need updating. Restart the Notebook after updates have been done. If your computer is having problems finding and installing operating system updates, try using the Windows Update Troubleshooting tool to fix the problem. Here is a document that shows how to update drivers that are not working correctly with Windows 10. I hope this helps you. Thanks.

Flash player not working after recent software update

I have a MAC OSX 10.5.8, after the recent software update my flash player no longer works.
I have read that there is a problem with security for the version of flash that I was using and this is the reason it was disabled. However, I have tried to download the most recent version from the Adobe website, but nothing happens and a message says I already have flash installed on my computer.
I have a version of flash in my HD>>Library>>Internet plug-ins, and there is also one in HD>>Library>>Internet plug-ins (Disabled) which I have tried to move but it only lets you copy it and it seems unable to be moved back to HD>>Library>>Plug-ins
I have also tried to download the "No Script" addon for Firefox so that I can at least have flash working in Firefox, but that doesn't seem to be downloading either.
Please could somebody help me. I cannot now watch videos, listen to my favourite radio stations or even upload pics to ebay to create ebay listings. This problem ruining my internet enjoyment and I just hope that it can be fixed again. How dare Apple just do this without any warning or giving any info on how to easily fix this problem once flash has been disabled.
I am not a techie so maybe there is an easy fix, but I have spent hours trying a lot of different things but nothing seems to be working.

Please, nobody waste any time replying to this issue as the problem appears to be fixed now. I rarely restart my laptop as I usually just put it to sleep, however, I restarted it and the problem looks to have gone away. I may have fixed it with some of the things I tried, but the laptop may just have needed restarting - I'm not sure.
But as long as the problem is resolved, I'm happy. :-)))
Thanks anyway!

Brand New 27" iMac i5 will not boot after installing software updates

I just purchased my new iMac 2 nights ago. I have been getting it setup with my apps, mobile me account, etc, and luckily just setup time machine and let it do a full backup.
I just ran Software Update for the first time, and now the machine will not boot. It hangs on the grey screen for about 1 minute before the Apple logo comes up. About 30 seconds after the Apple logo comes up, the grey spinning gear shows up, and about 1 minute after that I get the grey screen of death (You must restart your computer).
Any suggestions? A little frustrated here....

If you mean did I receive error messages, No, I didn't. However, the desktop reverted to the default purple night-sky looking thing, my applications and such all disappeared from the dock, and I couldn't open any files or folders (you don't have permission to ...), etc. I tried signing out and back in, rebooting, using a second admin account on the computer, creating a new admin account, etc. I ran Disk Utility, hardware checker, etc. No errors were found, and nothing changed. I could see all my files and folders, but they had a small red circle in the corner, indicating "locked" or "no permission".
I'll find the lines from the console log if that will help. The error showed up immediately and is in the computer's attempt to access the user/library/application support/sync services and same path to user/library/logs/sync services/log. (or something reasonably close to this. If you can use the exact path, I will get it) The link between my settings and files, and a password is apparently corrupted or something, so that the computer won't even let me change the desktop or any file, so I can't save, edit or discard anything, and can't drag files to another computer on the home network.
At least I'm still under the 90 day warranty, so I can call tomorrow. At this point, the SMART check says the drive is good, so I assume it's software. The only things new are the three auto Apple software updates I installed yesterday, so I immediately suspect them. But who knows?
Does this help you at all?

2nd gen apple tv not streaming after last software update

Similar Messages

Maybe you are looking for