2nd gen Apple TV shows setting date and time
and it won't reset the get passed it
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123
Similar Messages
-
HT204291 whenever i turn on apple tv the screen just shows 'setting date and time'
i also get an error code 200500 on my macbook when i try using airplay
It sounds like there's a problem with either the software or hardware of your AppleTV. Try unplugging AppleTV for at least 15 seconds, then plugging it back in. If AppleTV still does not work as expected, try the troubleshooting and restore process outlined in this support article: http://support.apple.com/kb/HT4367.
-
Apple TV wont set date and time eventhough I am connected to my wifi. Without date and time I cant do anything
My Apple TV just did the same thing, Ethernet stopped working and I had to connect with wireless to restablish network connectivity...
-
2nd gen Apple TV frozen on date setting so I am trying to restore on the computer.
2nd gen Apple TV frozen on date setting so I am trying to restore on the computer. I have it plugged in but nothing is coming up in itunes. What am I missing?
Hello Randlebo,
Thank you for using Apple Support Communities.
For more information, take a look at:
Apple TV: Unable to restore using iTunes
http://support.apple.com/kb/TS5231
Have a nice day,
Mario -
How do I set date and time on apple tv?
How do I set date and time on apple tv?
Fixed the same problem, STEPS
1. Reset your apple TV
2.It will again stuck on that setting, ignore it by press menu
3. Unplug ethernet wire
4. Try to connect with wifi, it should be work with wifi connection as mine.
5. Then you can switch back Ethernet wire after get fixed.
Thanks. Lemme know dude if it's work. -
I bought my apple tv in USA and use in Indonesia, but I can't set date and time.
How to set date and time so I can Home sharing with apple tv .
Call the shop in NYC and find out.
-
The apple tv is stocked at setting date and time
I Updated the Apple TV and now it requested to start the configuratio all over again and is stocked at setting date and time, can somebody help me?
http://appletv2.com/stuck-on-setting-date-and-time-fix/
-
How to set date and time on apple tv
how to set date and time on apple tv
Assuming this is not the first time you have used your Apple TV
1. You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
2. Also try restarting the router.
3. If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
having problem with the apple tv, because it still setting date and time and dont finish w the activation
That means it is having trouble connecting to the network. Make sure location is set correctly. Go to settings - general - network and ensure DNS is set to automatic. Check that your router is up to date. If on wifi try Ethernet.
-
I plug the Apple TV in and it just says setting date and time.
When I plug the Apple TV in it just starts up setting date and time. Tried unplugging it and resetting using the remote but it is unresponsive
Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
Can not set date and time on a new Apple TV
can not set date and time in a new appletv
Hello lfsalas55,
You may need to verify that TCP port 123 on your router is open and available for use by your Apple TV.
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Cheers,
Allen -
Why is the screen from my Apple TV doesn't go past setting date and time and the screen stays black
My Apple TV screen turns on black and stays on setting date and time a few seconds after that it stays black but on light is still on and nothing else happens,I can't get it to do anything else!I just moved and have a new router and I think that might be the reason but I don't know! Please help!!!!
I have the same issue and seeking an answer...
I have already reset my ATV3 to factory defaults twice and connected it directly to the router, but the problem remains the same... BTW, I connected it to the two routers of two different networks I have at home... It reacts the same to both nw....
Any ideas? -
Trying to setup my new ATV and it won't set date and time, and won't allow me to log in with my apple ID to homeshare OR to test te network, which I know is correct since I changed it. I live in an apartment complex and the router is in my roommates room. ANY suggestions? I'm at the point where I may return this because it has been nothing but a hassle. I'm very annoyed and just want the product that I paid for to actually work.
The ABOUT section says Network Time: Skipped (reachable) and Activation: Failed (skipped)
I'm also using my MacBook Pro as the homesharing with iTunes up to date.I had a similar issue wuth my new Apple TV. If you (or your roommate) are able to change the router firewall settings, do that first. I don't know the ports that you need, except that 123 is one of them (to set the time). Then restart the Apple TV. See if that will get you through the activation process. I actually ended up restoring mine to factory settings, but I'm not sure if that step was really necessary.
I understand your frustration, though. Getting the Apple TV to work was such a pain -- it almost feels like it is not really an Apple product. -
All of a sudden my ATV came up with a message stating trying to set date and time however cannot access. Could this be due to the recent hacking of Apple or is it something new. How do I fix?
Welcome to the Apple Community.
It's not related to any hacking.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
1. Restart the Apple TV (Settings > General > Restart).
2. Restart the Apple TV by removing ALL the cables for 30 seconds.
3. Restart your router.
4. Reset the Apple TV (Settings > General > Reset > Reset all settings)
5. Restore the Apple TV (Settings > General > Reset > Restore) -
Apple Tv is stuck on setting date and time.
I have my Apple Tv hooked up to my cellular network and it won't go passed the setting date and time screen. any ideas why it's not working?
Welcome to the Apple Community.
I don't have an answer to your specific question but trying to use the Apple TV with a cellular connection is not advisable, you will use up your monthly allowance in minutes.
Maybe you are looking for
-
Do I have MSI KT3 Ultra ARU v1 or v2??
Hey all Trying to figure out what motherboard I have EXACTLY so I know what CPU I can buy for it (upgrading). Its the same BIOS in both and I cant find any info one MSI's websites on how to find out which one I got. So HOW do I find this out people?
-
Dell E176FP monitor won't work with os 9.2
Hi I bought a dell 17 inch E176FP monitor but there is no display with my powermac g4 running os 9.2 It works fine when I plug it into my Dell inspiron laptop (awful product) and a smaller viewsonic model works fine with my G4. I've done a factory re
-
How to do the group validation
Hi, I have one problem in group validation. What is group validation & Can any one explain with short example with group validation. I want also some validation expression with example. Plz help me as early as possible. Regards Ashish Patel
-
Camera not working on MBA 13" mid 2012 with OS X 10.9.1
The built-in camera is not being recognized by anything - Skype, FaceTime, PhotoBooth, you name it. There are no updates available and I've tried rebooting, so I have no idea what to do here. Does anyone have suggestions, please??
-
The printing on the page uses only about 1/6 to 1/8 of the width of the paper and is centered and only prints about 27 characters and in a very small font. Also some web pages won't print out any info at all except for header info at the top.