2nd gen iPod shuffle not recognized by Yosemite or iTunes 12

I just connected my iPod shuffle (2nd gen) into my macbook for the first time since the update to Yosemite and iTunes 12.  Right when it's plugged in the iPod only blinks orange three times, then doesn't blink or light up again.  It doesn't show up in iTunes or in the finder.  It also doesn't show up in the USB devices on the system report.  It charges when plugged into a wall-USB charger, but isn't recognized at all by the mac.  Also, I'm using the factory mini-dock that came with it, which I believe to be in perfect working condition.
I know they're cheap, but I've ran thousands of miles with it and I've grown attached to it.  I've spent more time with it than most of my friends...
I'm afraid the new ones might not be as amazing as this one.
Although it is still useable, I really need some fresh music on there as my runs are beginning to get boring.
It has always connected fine with no issue, which leads me to believe its a Yosemite issue (maybe apple is trying to weed out the old iPod fossils still roaming about).  But, it may just be a coincidence that it stopped working just after the update. ...Maybe my iPod is just toast.  Any suggestions would be greatly appreciated!  Thanks in advance!!!

Hi
I had the same issue with my Late 2009 Mac mini running Mavericks and iTunes 12. When I connected my 2nd generation iPod shuffle it would blink amber once then do nothing. This seems to be a common problem with the iPod shuffle and newer versions of Mac OS X (10.6 and up) and iTunes albeit with somewhat varying symptoms but the same overall problem syncing the iPod with iTunes.
The predominant go-to solution is to give the iPod more power by either connecting the iPod directly to a USB port on the Mac or by disconnecting all other USB devices. On paper this makes sense.
What worked for me, however, was the opposite. After trying to solve this problem for hours (weeks, months), I had success ONLY after adding a low-powered 4-port USB hub to the chain between the iPod and the Mac. I suspect this had the effect of throttling the power supplied to the iPod from the Mac. I was able to perform a restore on the iPod then sync my music over.
I can't tell you much about the USB hub except that it is running at USB 1.1 speeds (12 Mb/sec). In theory a USB 1.1 extension cable should also do the trick. You might even be able to use the USB hub in old wired Apple USB keyboard. I will attach a photo of the hub I used to this post for greater clarity.
I really hope this helps.

Similar Messages

  • 2nd generation ipod shuffle not recognized by usb 3.0 port, 2nd generation ipod shuffle not recognized by usb 3.0 port

    Hi,
    My 2nd generation ipod shuffle will not connect to any usb 3.0 port.  I've tried on to computers -- one Windows XP and the other Windows 7.  Any ideas?

    Hi
    I had the same issue with my Late 2009 Mac mini running Mavericks and iTunes 12. When I connected my 2nd generation iPod shuffle it would blink amber once then do nothing. This seems to be a common problem with the iPod shuffle and newer versions of Mac OS X (10.6 and up) and iTunes albeit with somewhat varying symptoms but the same overall problem syncing the iPod with iTunes.
    The predominant go-to solution is to give the iPod more power by either connecting the iPod directly to a USB port on the Mac or by disconnecting all other USB devices. On paper this makes sense.
    What worked for me, however, was the opposite. After trying to solve this problem for hours (weeks, months), I had success ONLY after adding a low-powered 4-port USB hub to the chain between the iPod and the Mac. I suspect this had the effect of throttling the power supplied to the iPod from the Mac. I was able to perform a restore on the iPod then sync my music over.
    I can't tell you much about the USB hub except that it is running at USB 1.1 speeds (12 Mb/sec). In theory a USB 1.1 extension cable should also do the trick. You might even be able to use the USB hub in old wired Apple USB keyboard. I will attach a photo of the hub I used to this post for greater clarity.
    I really hope this helps.

  • Help! 2nd gen ipod touch not recognized by itunes

    i bought a new ipod touch 2nd gen and when i plugged it in my pc itunes 8 could not recognize ipod. it says "The software required for iPod touch is not installed. Run the iTunes installer to remove iTunes, and then install iTunes again". i followed the instruction to remove itunes and reinstall again but still itunes could not recognize ipod. what will i do? pls help me

    I have same problem, same iPod and same computer. Help?
    Here is my topic

  • 4th Gen iPod Shuffle, not recognized by my Macbook Pro

    background:
    bought an ipod shuffle 4th Generation 2 days ago,
    syned it with my macbook pro/itunes
    everything was fine. got my music on there, i did noticed once or twice a window popped up saying i disconnected my ipod shuffle without ejected (i did not)
    now get rid of possible solutions i have already checked for:
    ipod was always full connected on the headphone jack, clicked everytime, USB was always secured into my macbook as well
    itunes has the latest version
    updated my ipod shuffle immediately after getting it
    macbook pro is updated with the latest mountain lion OS
    tried resetting my ipod
    tried resetting my ipod while still connected to my computer

    There is no Finder access to an iPhone 4S or other iOS device.
    (79999)

  • Brand new 4th Gen. iPod shuffle. not recognized as a device.

    Hello, I am trying to set up my brand new iPod shuffle (4th generation) and when plugged into a computer get nothing.
    So far I've tried: uninstalling and reinstalling iTunes
         -tried on 3 different computers
         -tried using different USB drives in case one was not recieving power
         -went through the troubleshoot page and still nothing
         -tried to reset iPod by unplugging, turning off for 10 seconds and restrating
    Still nothing!  Please help!!!

    If the light does not come ON when you connect, that means the shuffle is not seeing a connection, either for data or for power.  So it's probably not a software-related problem on the computer (such as something related to iTunes or an OS setting).  Make sure you have inserted the plug on the USB cable completely into the shuffle's headphones jack.  The fit can be tighter than expected, especially when it's brand new.
    http://support.apple.com/kb/ts3572
    If that does not help, since you tried different computers and confirmed the USB port is working with an external drive, the cause is probably not a faulty USB port on the computer.  That leaves a faulty USB docking cable or a problem on the shuffle as the most likely cause. 
    If you have an Apple Store nearby, and you should make a reservation at the store's Genius Bar, and take your shuffle (and cable) there. 

  • Ipod Shuffle not recognized by computer and iTunes and does not charge

    I connected my iPod to my computer but for some reason, it is not recognized at all by the computer nor iTunes. It doesn't charge either. I have tried all the USB ports and since I have Windows Vista, I cannot use the Restore Utility thingy. I purchased my iPod about 2 years ago so a warranty replacement is out of the question. Since any choices have been kicked off, can anyone find a solution to my problem? TYVM pl0x

    Time to replace it: $49 2nd Gen shuffle at online Apple Store...

  • IPod Shuffle Not Recognized In Windows Or iTunes v7.0 - What Now?

    Hello everyone,
    I am having the same problem as many who have posted here. I have upgraded my software to iTunes v7.0.1.8. I also accepted the auto update for my iPod Shuffle - 512GB 1st Gen to v 1.44 (I believe). Of course, now my Shuffle is not recognized in iTunes and is only recognized in Windows for less than 5 seconds (as I have monitored it). I am listing below all of the actions I have taken today.
    As none of these have worked, my question is now what? Does anyone have any other suggestions before I take the dreaded step of calling support? Any help is appreciated.
    I am not happy with this upgrade issue at all. I expect much better from Apple.
    Steps Already Taken:
    1. Reset iPod.
    2. Set Terminal Services to "Manual" and restarted my laptop PC.
    3. Changed all USB Root Hub entries power management options to "Allow the computer to turn off this device to save power option" and rebooted.
    4. Assigned my external hard drive a different letter as it was assigned to "E" and tech support documentation suggested I changed it - I changed it to "M".
    5. I stopped the iPod Service via the Services and Application interface from My Computer/Manage, reattached the Shuffle, and started the iPod Service. The Shuffle was still not recognized.
    6. I uninstalled iTunes 7.0.1.8, the Apple Software update and QuickTime. I deleted all temp directories; program files folders and all possible traces of all three pieces of this software. I also deleted my iTunes library. I reinstalled all of this software and re-built my Library. NONE OF THIS WORKED!
    My 30GB Video iPod works fine and always has - it is only the shuffle for which I have this issue any only since the upgrade.
    What do I do now? If no one has another fix, I will be forced to call Tech Support after an experience with them over a year ago I would almost rather throw this thing away!

    qswh - I too cannot play the songs that are loaded on the shuffle. Additionally, I get a green & orange light when I plug it into a USB port and then I either get a blinking orange light or a solid orange light from there after.

  • 4th Gen iPod Shuffle not detected by Windows(7)/iTunes

    Hi,
    I have an iPod Shuffle 4th Gen (I believe it's a 2GB).  I use windows 7.
    I'm having an issue where Windows and iTunes cannot detect my iPod shuffle.
    It was working fine, then I did a restore and set it into manual handling.  About 30 minutes later, I heard a USB device get disconnected from Windows (it played the USB disconnect sound/tones over my headphones).  Now, upon plugging it in to ANY USB port, it does not appear.
    I've looked at several articles/troubleshooting pages, and none seem to have resolved this issue.
    I also noticed that when plugged in, it slowly flashes a green light (no orange light comes on at all).  I was concerned there was an issue with power, but upon turning the device on, I get an automated message saying to add music to the device before it turns itself off.
    Any thoughts would be welcome.
    Thank you.

    Do the USB ports work for for other devices?

  • 5th Gen iPod is not recognized by PC or iTunes

    I recently purchased a new PC with Windows Vista home premium and shortly after transferred my iTunes library to the new PC. I heeded the warnings about waiting for the new version of iTunes before trying to connect my iPod. When iTunes 7.1.1 was released, I installed and attached my iPod to the PC and everything worked fine. I was able to sync my iPod and transfer music to it. I accomplished this several times.
    Recently however, I attached the iPod and the PC did not recognize it. I have tried every suggestion available (the 5 R's - with exception to Restore since that's currently impossible, reinstalling USB drivers, rebooting, different PC's with different OS's, different USB cords, etc.). All this with the iPod fully charged. Other USB devices, such as my cell phone, external hard drive, etc. are recognized when plugged in, but the iPod does nothing - even when using the "Add Hardware" option. I even installed the MS patch to resolve the "safely remove hardware" issue between the iPod and Vista and still nothing.
    The iPod still works - still plays music, still charges via USB, but I am unable to add any new music to it or delete anything from it. This is very frustrating. Has anyone else experienced anything similar to this or does anyone have any other suggestions I could try? TIA
    PC Other OS Windows Vista
    PC   Other OS   Windows Vista

    Hi IVBama!
    Okay, I've not sure if you've tried a couple of things yet:
    Have you tried putting your iPod into disk mode, then connecting it to your computer? Follow the instructions in this article to force your iPod into disk mode:
    Putting iPod into disk mode
    Also, a full reinstall of iTunes might be worth a try here.
    Disconnect your iPod from your computer.
    Go to "Add or Remove programs" in Control Panel. Find "iTunes" and "QuickTime" on this list, and remove them both.
    Then, download the Windows Installer CleanUp Utility, to clear out the remaining iTunes and QuickTime installation files off your computer (see this MS document for information on it):
    Description of the Windows Installer CleanUp Utility
    Also, use this article to manually remove the left over files from installation:
    Removing iTunes and QuickTime for Windows
    After you've done that, restart your computer.
    Then, go to this page to install the iTunes + QuickTime installation pack onto your computer again:
    Download iTunes - 7.1.1.5
    Now, restart your computer once more.
    After the computer has fully loaded up, open iTunes, and connect your iPod to your computer.
    Does the iPod get recognized by your computer/iTunes, or not?
    -Kylene

  • HT1338 Why does my 1st gen iPod shuffle not recognized by ITunes 11

    Why did it take me ten minutes to log into this web site.  The security pass words are rediculous

    Apple no longer supports 1st gen Shuffle.  They want you to throw it away and buy the latest gadget from Apple.  Your alternative is to use a PC, which will recognize your IPod. 

  • 2nd Gen iPod shuffle is not recognized by iTunes or computer

    I read the other posts about people's 2nd Gen Ipod shuffles not being rcognized by iTunes or their computer, but none of them seemed to fit.
    I have had my iPod shuffle for less than a week. Last time I had my iPod connected to iTunes in the "Settings" section I clicked "Do not automatically open iTunes and synch with iPod" or something along those lines. I assumed this meant iTunes wouldn't always open when I plugged it in to charge it.
    However, now when I plug it into my computer, iTunes does not recognize it and I get a message from my computer that there is a "USB Device Not Recognized" and the error message reads: "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." It shows up as an "Unrecognized Device". I have tried plugging it into a different USB port, and I have also downloaded the "Ipod Reset Utility" to try to reset it to it's factory settings, in case that would allow it to synch up with iTunes again. This does not work. Does anyone know why this is happening, or how I can get iTunes to recognize my iPod again? Thank you!

    Brand new ipod shuffle (2nd gen). When I plug it into the USB port, a "Disk Insertion" prompt warning appears with the message "The disk you inserted was not readable by this computer." The two options in the prompt window are 'Eject' or 'Ignore.'
    Having read other message boards, I decided to plug it into a PC computer and re-formatted it with FAT 32 filing system, but the exact same thing still happens. My MacBook give me the same message when I plug the shuffle to the computer. iTunes does not recognize it that anything is plugged in either.
    Any suggestions?

  • 2nd gen ipod shuffle will charge with one computer (vista) but not the other computer (windows 8).  Please help!

    My 2nd gen ipod shuffle will charge on my old vitsta computer but not my new windows 8 computer. Does anyone know why that might be? The new computer recognizes the ipod and I can see everything on it, change settings, etc. it just won't charge. Is there a reason as to why this should be happening?

    Just bought a refurbished 2nd generation ipod
    shuffle. I am running the very latest version of OS X
    and iTunes on an iBook G3 600 mhz with the slower USB
    ports, not 2.0 ports. The ipod mounts and is
    regognized by itunes, but I cannot seem to register
    the ipod from itunes, it always has an error message
    when I submit to register (all forms are filled out
    correctly). The registration window in iTunes shows
    that this ipod is formatted for Windows (from the
    previous owner I assume) and may be causing my
    problems?
    No. ALL shuffles are FAT32 format.
    The other problem is that it will not sync and
    transfer any music from itunes library. I am trying
    to transfer simple mp3 files that should be compliant
    with the ipod specs. No luck even after multiple
    restarts on the ipod. Any help would be appreciated!
    Thank you.
    Try this: http://docs.info.apple.com/article.html?artnum=305204

  • 2nd Gen ipod shuffle charges on Mac but not on PC

    I recently switched from Mac to PC and my 2nd-Gen ipod shuffle won't charge on PC.  The PC reads my shuffle and I'm able to transfer music from itunes, however the battery light indicator doesn't glow.  In order to charge the battery, I have to plug my ipod back to my macbook which is inconvenient.  Btw, I connect my ipod to the PC with USB 3.0 port..I have windows 7 if that's any help..  Suggestions anyone?

    Also, take a look on iTunes if the battery icon is showing that the unit is in charge. Because if you're able to transfert music on it, there's no choice, there's must be electricity on it.

  • My OS X (10.9.1) won't recognize my 2nd gen iPod shuffle anymore :(

    Ever since I got a new desktop Mac 10.9, my 2nd gen iPod shuffle has only shown up occasionally when I plug it in...apparently at random.  I've tried restarting with it plugged, plugging it while on, plugging it while off—no variables seem to make any difference.  Since I updated to Maverick, nothing at all seems to work anymore.  Other than that, the ancient shuffle is plugging along just fine.  Any tips?
    Thanks!

    Hey JZKR,
    Thanks for the question. I understand you are experiencing issues connecting your iPod shuffle to your new Mac. The following resource may provide a solution:
    iTunes: iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/TS1410
    Thanks,
    Matt M.

  • Some songs can't be loaded on 2nd gen ipod shuffle (question with answer)

    I'm getting the following message when trying to load some songs on to my 2nd gen iPod shuffle:
    "Some of the items in the iTunes library, including 'Allegro', were not copied to the iPod "iPod" because they cannot be played on this iPod." When I click on the details triangle I get "Allegro" was not copied because the audio format is not supported by the iPod "iPod".
    This is happening for many songs that were previously loaded on this iPod. The songs were all loaded into iTunes from CDs. I have tried the iPod reset utility, deleting all songs and reloading, selecting a single song to sync, no luck.
    When I do a "Get Info" on these songs they say they were encoded with either iTunes 6.0.5 or iTunes 7.0.2.
    OK. Even before I was able to post the question, I found the answer. If I select the songs and from the "Advanced" menu select "Create AAC version", the AAC version can be copied to the iPod. Get Info shows the encoding has changed so AAC and iTunes 9.0.1.
    Hope this helps someone else with a similar problem.
    david.

    You can't "sync" that is automatically update an iPod from multiple libraries or computers. If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply.
    Using iPod with Multiple computers
    Managing content manually on iPod

Maybe you are looking for

  • How do i get a song to delete off my ipod but not my itunes?

    Ok, well as you can see in the question above i do not want to delete the entire song from my itunes library, but i want it off my itouch. The only thing is i can't seem to get it to stay off of my itouch. I delete it off my ipod but everytime it is

  • Flash Player screwed up my whole computer!

    My computer was fine until last night I recieved a pop up that said I needed to install and Active X control. It prompted me to download Flash player 10. I tried to do so, but it will not fully install or uninstall. I looked at the support messages a

  • JheadStart -Migrated to 10.1.3 ,but Few API not found.

    Hi , I have migrated my project from JDEV 10.1..2 TO JDEVE10.1.3 , when I rebuild the project , it was showing many errors.so i checked out this forum and fixed by replacing import oracle.jheadstart.model.adfbc.JhsApplicationModuleImpl; to import ora

  • Video duration changes when imported

    Hello! I'm having a problem importing video that is over 10 minutes long into after effects cs3. okay, when I import a video that is 10 minutes or longer in duration it comes into after effects with only 2 minutes of the video. A video that is 8 or 9

  • Using VBA for loading Query data into Excel workbook

    Hi all. I want simply load data from BEx query into Excel Wortksheet using VBA because of report formats and footer section at the end of the results. Any code examples, tutorials, comments, suggestions will be regarded. thanx in advance, Gediminas