2nd gen ipod touch stuck in dfu mode

apparently i put my ipod touch in dfu mode it shows the dfu screen
when i attach to my mb attempting to restore/ sync i get an error the ipod touch has a password enabled (it does) please enter the password before restoring... the problem is i cannot get the ipod touch out of dfu to enter the password
thanks inadvance

this is exactly why i don't have a pass code on mine. try this link.
http://support.apple.com/kb/HT1852
go for the apple mobile services.

Similar Messages

  • 2nd Gen iPod Touch stuck in restore mode

    My Friend recently gave me his 2nd gen ipod touch that he no longer uses as a gift, i decided to restore it so i could put my music on it and remove all the apps that were on there because i wanted more space for music, while restoring i came across a problem, an error message popped up and said, "The iPod "iPod" cannot be restored, an unknown error occured (2003)." i have the latest version of itunes installed and ive tried everything mentioned in the following article http://docs.info.apple.com/article.html?artnum=307219, this ipod was fully functiong before i attempted to restore it and now its stuck in restore mode and will not work at all, i do not feel like paying to talk to an apple representitive to help me with a problem that shouldn't be happening in the first place so if someone could help me here that would be greatly appreciated.

    Well i had kinda the same problem. I pressed the wake/sleep button and the home button for 10 seconds. Then it shuts down. You connect it to iTunes and says this iPod was in restore mode, and continues or starts again. Hope can help!

  • My 2nd gen ipod is stuck in recovery mode, and when i went to restore it it said my device was unrecognized

    my 2nd gen ipod is stuck in recovery mode, and when i went to restore it ive tried everything.

    Hopefully this will help you.  Try placing your iPad in recovery mode again.  You may have to try this a few times.
    iOS: Unable to update or restore

  • TS1538 Ipod Touch stuck in DFU mode, not recognized in itunes after 1602 error restoring.

    I've tried all of the: Hold Power button and Home items. It's plugged into the computer, screen is black. Windows sees the apple mobile device driver under devices and hardware. The driver's properties says it's in DFU mode. It was constatnly stuck in Recovery mode showing the CD+music note icon and the 30-pin connector image. Connecting the ipod to the computer, windows makes the connection sound but itunes does not open. Opening itunes, ipod is not recognized.
    It's a gen 1 touch, version 2.? firmware, I think.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    also:
    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • Ipod touch stuck in dfu mode comp wont recognize it

    hello this problem all started when i was updating ipod 4g to ios5 and my dog bumped my cord and messed up the update in the middle of the update. i had it fixed and it worked for three days, then i updated over the new wifi feature and the computer went into sleep mode in the process. plugged it in computer recognized it as a ipod but itunes said i need to restore it. in the process of restoring some error occurred and i put it into dfu mode so my computer would recognize it now my ipod is stuck in dfu mode and my computer and itunes wont recognize it it just says it is a unrecognized usb device. any suggestions would be real nice so i wouldn't have a $300 paper weight

    ok got it fixed it needed to be shut down when i plugged into the computer for the itunes to recognize it my ipod kept on restarting as soon as it shut down thank you for the help

  • 3rd Gen Ipod touch stuck in recovery mode....please help!

    I just wanted to add some music for a birthday party and this has become a total failure. worked fine yesterday...so i plud it into my laptop and it asks to update itunes, for the sake of being in a hurry i skipped that, and came back and all of a sudden the wierd recovery mode picture was up and the "needs to be restored" message came up. Well, that *****, so im thinking ok...restore it and just start over....no dice. Tried several times at home to restore, and everytime it failed to restore. Updated iTunes, etc....still nothing. Now im at work and i downloaded a fresh new copy of itunes and dont even have an option to restore it. Says i have no network connectivity, so i have 0 options to touch the ipod settings.
    I've tried holding the buttons down until the Apple icon comes back up and it just cycles right back into recovery mode.
    HALP!
    heres the info i grabbed form Diagnostics...
    Microsoft Windows 7 Business Edition Service Pack 1 (Build 7601)
    Dell Inc. Precision WorkStation 390
    iTunes 10.4.1.10
    QuickTime 7.7
    FairPlay 1.12.20
    Apple Application Support 1.5.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.1.2
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.2 (333.2)
    Gracenote SDK 1.9.1.485
    Gracenote MusicID 1.9.1.102
    Gracenote Submit 1.9.1.133
    Gracenote DSP 1.9.1.43
    iTunes Serial Number 002CAFF802B55228
    Current user is an administrator.
    The current local date and time is 2011-09-23 08:39:30.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA Quadro NVS 285 (Microsoft Corporation - WDDM)
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 10.4.1.10 is currently running.
    iTunesHelper 10.4.1.10 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    LSI 1394 OHCI Compliant Host Controller.  Device is working properly.
    Connected Device Information:
    iPod touch, iPod touch (3rd generation) running firmware version 4.3.5
    Serial Number:    1A026XBA6K2
    **** Device Sync Tests ****
    Sync tests completed successfully.

    I was looking for a way to get around that, as it sounds plausible. But i have had iTunes on a previous machine here at the office and it worked fine. Right now, the only option i have in iTunes with it connected is to "eject" the ipod. Not neccesarrily an error # message, but one does come up that says "iTunes could not connect to the iTunes Store. Make sure your network connection is active and try again"
    as for restoring at home, it just goes through the motion on the progress bar, but when it reaches around 100% it says "failed to restore. ___" i cant remember the rest as i was up til 2am, and back awake at 6am trying to figure this out...
    Last night, there was no battery icon, and the screen stayed illuminated in recovery mode...i updated iTunes, and restarted my laptop at home, and now this morning the screen times out and dims, and there is all of a sudden a battery charging icon in the upper right corner. It would not "power down" at all last night...there was no "power off" slide option after holding the button(s)....this morning it will power off.
    It also wouldnt connect to my car radio this morning like it would last night when i came home. The radio doesnt even recognize it anymore.
    here is a quick screenshot of what i see...nothing...with it plugged up...

  • IPod Touch stuck in DFU mode

    I used Grayd00r on my iPod Touch 3G and now it's stuck in a loop where the apple logo comes on & then a spinning wheel. The computer recognizes the iPod but I can't restore it or reset it. Is the iPod Touch completely bricked?

    You will not get any help here in this Apple forum
    Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
    Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

  • IPod Touch stuck in DFU mode, broken lock button, will not connect to computer.

    I have an iPod 4g running on iOS 6.1.6. The lock button has been broken for little over a year now. But yesterday, my iPod went into DFU mode and will not connect to my computer whatsoever. I have tried everything that Apple tells you to do to try and fix this issue like restarting AMDS, reinstalling iTunes, and even the USB Driver. Nothing has worked, and I would really like some help with this. Thank you very much!

    Try:                                               
    - iOS: Not responding or does not turn on           
    Ignore the reset and when it says place the iPod in recovery mode
    Place the iPod in recovery mode using one of these programs:
    For PC      
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                          
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Save pictures from 5th Gen iPod Touch stuck in Recovery Mode

    My iPod Touch has never had any issues until the other day when the battery died and when I recharged it, the screen shows the connect to itunes graphic.  If I connect it to my MBP, I get the message "iTunes has detected an iPod in recovery mode.  You must restore this iPod before it can be used with iTunes".
    I have several hundred pictures on here that were never backed up to my MBP or iCloud, so I'll lose all of them if I restore.  I tried to force it out of recovery mode with various patterns of holding down the power and home button without any luck.  I've also downloaded RecBoot and using that to force it out of recovery mode doesn't work either.
    Are there any ways to either 1) get it out of recovery mode and working like normal without doing a hard restore or 2) rip all my unsaved pictures off it and then do a hard restore?
    Thanks!

    1) No
    2) No
    They are gone.  You should be importing them to your computer regularly as you would wiht any digital camera

  • 1st Gen Ipod Touch stuck in self restore mode

    Hello,
         I have this ipod touch 1st gen I do not know what version it is running. I tried to restore it while i was away from my house. Now it is stuck with the apple logo and the spinny wheel thing on it. I havent been able to bring it back. Ive tried holding the Home button and the Lock button for 10 seconds but it goes right back to the restore screen. Plus it won't connect to itunes now so i cant restore it with the computer. Please Help
    NEVER MIND THIS PROBLEM WAS SOLVED!!!!

    ERROR (1)
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - Try another cable           
    - Also, confirm your security software and settings are allowing communication between your device and update servers.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar     
    If  you  have iOS 4.2.1 or later on the iPod and there was version compatible with that version, then you should be able to get a compatible version by:
    App Store: Downloading Older Versions of Apps on iOS - Apple Club           
    App Store: Install the latest compatible version of an app

  • 2nd Gen. iPod touch in recovery mode

    My fairly new 2nd Generation iPod touch goes into recovery mode almost every week. I'm started to get anoid because if I go on a trip without a computer, and it requires a restore, it's useless.

    Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore
    Towards the end it says "If after restoring your iPod, the message described above reappears, the iPod drive letter may need to be reassigned. See the "Change the Drive Letter" section of this document for steps to assign a different drive letter" which contains a link to this article: Windows confuses iPod with network drive and iTunes may exhibit strange behavior in relation to the iPod.

  • IPOD TOUCH STUCK IN RECOVERY MODE GRRR:(

    Hey guys, so i ordered a second hand Ipod touch (2nd gen) from Ebay and it seems to be stuck in recovery mode. I tried doing the whole press the two buttons at the same time to get out of that mode but it just goes back to the same image! I need to get it connected to itunes asap but when i do, itunes doesnt recognise it! The seller provided me with a USB as i only have an iphone 5 and my laptop AND my computer does not seem to recognise it. Do u think i just need a new USB??????  Everything is up to date such as Itunes. I need to get this fixed asap as im going on holiday soon and i need all my music! Someone help!!:(

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    Try another cable
    Try on another computer
    Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                              

  • New iPod Touch stuck in recovery mode during initial setup

    I am trying to set-up my daughter's new iPod touch 5th Gen. When you try to connect to iTunes message says "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes". Even when you disconnect from computer it is stuck on screen telling you to connect USB to computer.  Two of her friends also got this iPod for Christmas and are having the same problem...during initial set-up. I've tried the system updates 3 times. iTunes recognizes the device, but the computer is not recognizing it as a drive. I've tried both my Mac and my Windows PC.  I've tried hard resets.  You can't remap the drive because the device doesn't show up. Most of the apple support topics address if iTunes doesn't recognize the device in conjunction with it not being recognized by the drive.  Obviously a problem with the new update because several brand new iPod touches wouldn't be having the same problem. Please help if you've found a solution. Happy New Years! 

    See if placing the iPod in DFU mode will allow a restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Does the iPod charge when connected?
    Have you tried another computer?
    Have you tried another cable?
    Some users have reported defective Lightning cables came with their 5G iPod. Some did not word from the beginning and for some the cables failed after a very short time.

  • Trying to update iPod touch - stuck in backup mode

    I have a 2nd gen iPod touch and am trying to update the software, which iTunes is kind enough to remind me to do everytime I connect the iPod to my computer.  I have synched and backed up recently, or so I thought, before being able to download and install the update.  Now when I am trying to do the update it has synched again, but is stuck in backup mode without any signs of progress for the past hour.  It said it would take an hour or more to complete the update, but maybe they should reword it to say it'll take a day or more.
    The last time I tried to do the update and couldn't I finally downloaded an update to iTunes, hoping that would help but no such luck.  What am I doing wrong? 

    See Here for
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • My 2nd gen ipod touch wont start?

    i have my old 2nd gen ipod and i pushed restore and it went to the startup screen, and it wont get past the apple.Every now and then the screen flashes. Ive tried connected it but since it hasn't started i cant get to it on itunes so what do i do???

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • HT4061 After installing the latest version of I Tunes I no longer get the total number of songs in my I Tunes library?

    After I Installed Itunes V. 11.1.3.8 on Windows 7 I no longer receive the total number on songs stored in my I Tunes Library. This is an important metric in maintaining and managing my I Tunes library. Thanks, any help appreciated. TodonKansas

  • Using AD to authenticate BYOD users on Guest WLAN

    First off, I have several WLANs -- one is a "Guest" that is anchored to our corporate WiSMv1 running 7.0.240.0 code.  We have many 5508s running 8.0.100.0 -- the "guest" is tunneled back to the core WiSMv1.   Right now, the Guest splashes a web page

  • Encore 2.0 Help with thumbnail

    Hello, I've created a menu in Photoshop CS3 with the whole (+) and (=1) things. When I import the menu in Encore, I get these really annoying overlapping buttons. I understand why, I just need a solution: I've uploaded a picture of the layout of the

  • Maximum number of columns in spreadsheet?

    Working with Numbers 3.5 and spreadsheets seem to be limited to around 254 columns. Is this a default? Can find no documentation on spreadsheet size limits.

  • XPD and cProjects integration

    Hi All, We are implementing xPD 2.0 and cProjects 4.0. The scenario of integrating the two is that, in the concept stage, a project in cProject will be created from xPD. The master guide of xPD 2.0 states that "<i>You can connect additional back-end