2nd Gen iTouch Date/Time Randomly reseting?

Using 2.2 firmware with 32GB iTouch the system date and time get set to some random new date time from past.
1) So far the random date-time has always been in the past.
2) Somehow related to iTouch being connected to PC.
3) Might be related to Sync [but not always].
4) Might be related to Vista going into sleep mode while iTouch is connected.
Any fixes or work-arounds?

I have the exact same problem and I have narrowed it down to the corruption occurring after my PC goes into sleep mode. I get the same failure on my two machines. One is a desktop running Vista and the other is a Thinkpad running Windows XP. I also discovered that I did not have a problem using my laptop to charge my ITouch until I loaded it with ITunes. I deliberately put it into sleep mode before loading ITunes and it worked fine when it came out of sleep mode. I then loaded it with ITunes today to see what would happen and sure enough the clock and time got reset to a random date and time once it came out of sleep mode. I have had this problem with the 2.1 and the 2.2 level of code on the ITouch with my Vista machine and it was only today that I tried my experiment with my laptop machine. I hope that Apple can come up with a fix soon, as this problem is very annoying, since I cannot leave my Itouch connected for any length of time without the clock going bonkers.

Similar Messages

  • HT5569 cannot connect to wi-fi network with my 2nd gen itouch even after following most troubleshooting solutions; have 3 other devices that connect with no problem (using wndr3700v3 dual router)

    cannot connect to home wi-fi connection with my 2nd gen itouch even after following most troubleshooting solutions. i have 2 5-gen itouch ipods and a kindle fire hd 8.9 that can connecto to my wi-fi network and even download from my e-mail accounts with no problem. it had no problem connecting with my old a/b/g netgear router nor the first time i installed my new netgear wndr3700v3 router. since then, no connection. don't know what happened.
    help

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar
    Could it be this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • The backlight on my 2nd gen itouch has quit...

    The backlight on my 2nd gen itouch has quit... I restored the restored the software, but it didn't help - I'm sure its a hardware problem. Does anyone know what the fix for this might cost? Thanks
    I couldn't see any other similar questions until this posted just a second ago - in case in helps with the diagnosis, the backlight does come on intermittently, which made me think it was a software problem, but now I'm just not sure. 

    I would make an appontment at the Genius Bar of an Applew store.  It is free except for your time.  Apple will exchange your iPod for a refurbished 2G for:
    Apple - Support - iPod - Repair pricing
    A third-party place may be less expensive: Here us one.  Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    However, it may not be worth it for a 2G iPod.

  • 2nd Gen itouch syncing

    2nd Gen itouch: I am using Outlook Express on my PC & wish to continue doing so.
    Succesfully synced music, photos & bookmarks but will not sync address book. I have tried using Outlook, this does not work and have followed all insructions in manual. Can anyone help?

    Can anyone help?
    Not here I'm afraid. This is the *Mac OS X Technologies > iSync* forum, which has nothing to do with syncing iPod touch (not iTouch) to Windows PCs.
    Try here: Connecting iPod touch to Windows

  • How do I update my 2nd gen iTouch in order to get angry birds???

    How do I update my 2nd gen iTouch in order to get angry birds???

    This is the way you upgrade.
    What is the problem?
    What happens when you do this?
    Do you you click Check for Updates on the summary page in the main itunes window?
    What exactly have you tried?
    What exactly happened?

  • The battery of my 2nd gen itouch drained. when i tried to charge it, it's already in recovery mode. how can i get it out of recovery mode without restoring?

    my 2nd gen itouch went to recovery mode after the battery drained. how do i get it out of recovery mode without restoring it? btw, my itouch is not jailbroken and it's on ios4 (don't know which version). thanks!

    you can find softwares like recboot that will remove the recovery mode. you can search it on google
    http://www.google.com.np/search?q=download+recboot&ie=utf-8&oe=utf-8&aq=t&rls=or g.mozilla:en-US:official&client=firefox-a

  • Can i put iOS5 update on my 2nd gen. itouch?

    i have a 16 gig, 2nd gen itouch. can i get the iOS5 software update on it? if so how. and if not, will they make it available anytime soon?

    Probably not, if memory serves, iOS5 is only available for iPod touch 3rd generations on up.

  • Solitaire City on 2nd Gen. iTouch

    I've got Solitaire City on my 2nd gen iTouch. Here's my question for the group. When playing a game and you move a card from the field to the "home row", a bell sounds. On my iTouch I hear a crackle when the bell sounds. I'm just wondering if anyone else hears the same thing, or do i have a screwed speaker.
    I hope to hear from others.
    Thanks

    - Purchase and install version 3.0 of the iPhone/Touch software from the iTunes Store.
    - Go into Settings>General and set Bluetooth to On.
    Note: The only Bluetooth devices that the Touch will currently sync with are stereo speakers and headphones (NOT headset/mic combos such as you would use with a cell phone).

  • Activating bluetooth on 2nd Gen itouch

    hello
    i just got the 2nd gen itouch and was wondering if anyone can provide me with step by step instructions on activating the bluetooth.
    Thanks so much.

    - Purchase and install version 3.0 of the iPhone/Touch software from the iTunes Store.
    - Go into Settings>General and set Bluetooth to On.
    Note: The only Bluetooth devices that the Touch will currently sync with are stereo speakers and headphones (NOT headset/mic combos such as you would use with a cell phone).

  • TS3595 I updated my itunes and restored my 2nd gen itouch, now my itouch does not work properly (keeps freezing). how do i fix this?

    I updated my itunes (latest verion out as of nov/20/2012) and restored my 2nd gen itouch, now my itouch does not work properly (keeps freezing). how do i fix this?

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • I have a 2nd gen itouch and i tried to restore it...but i took the cord out on accident while restoring...so everytime it turns on it stops at the apple screen with the little loading thing that looks like a flower. it wont even connect to my laptop.help?

    ok, so my itouch 2nd gen starts up only to the apple logo but stops there with the loading thing that looks like a flower. it doesnt connect to my laptop either. it got unplugged while trying to restore it on my laptop and now its not rly working. any help? i alredy tried holding both buttons down like more than 100 times and it still doesnt work. so any solutions?

    Try placing the iPod in recovery mode and then try restoring the iPOd via iTunes.  For recovery mode see:
    http://support.apple.com/kb/HT1212

  • IPod touch 2nd gen restored 3 times in a week - hardware or firmware issue?

    I have a 2nd gen 32 gig ipod touch that I purchased just before christmas. Everything has been just great until this past week. It has crashed hard..3 times now. I get the apple logo and it won't boot any further.
    Each time has been random, crashed once while watching a movie, once in safari and once while playing a game.
    I've just restored it, again. Anyone have any ideas? Firmware issue? Or hardware issue? Is there any way for me to roll back to a previous firmware?
    Is anyone else having the same problem?
    Any thoughts would be appreciated. I'd hate to have to send it back to Apple.
    Thanks in advance!

    OK now I get it.
    You're going to have to do a full restore to factory settings and begin adding the music, video and apps back one category at a time.
    Don't get in a rush, you need to know where/when the problem starts.
    If every thing's fine for the week with music and video but crashes the day after you install "that app." then you'll know.
    Also some apps have caused trouble in the past but you'll have to list them for anyone else to tell.
    Just a note of warning : you may have a music or video file as the problem but you may also have a "quantity" problem.
    The first will be fixable with a new file, from Apple(iTunes) if it's not something you created, so you'll need to have at least a rough idea of what was on your computer when the crashes started.
    Make notes if you have to!
    If the crashes continue then it's the Apple store, it could still be hardware or some program corruption, but at least you'll have eliminated a few contenders.

  • Cannot update 2nd gen iTouch to 4.2 because iTunes 10.2.1 won't update

    Hello,
    I have two problems. One, I need to update my iPod Touch 2nd gen to 4.2 (I am currently running 3.1.3). However, when trying to update I am prompted to update to iTunes 10.2.1 first(I believe that's the one). But the iTunes update won't complete. I get an error message telling me that it wouldn't update and to try it manually. I've tried that to no avail. This has happened several times over the last few months. I keep trying to update iTunes but I always get that error message.
    So needless to say, my second problem is that I cannot update my iPod to 4.2.
    Is there a away around this? Thanks.

    I would completely uninstall Itunes and other associated Apple software and then reinstall the latest versions. The following provides the necessary instructions:
    http://support.apple.com/kb/HT1923

  • On my 2nd gen itouch i accidently hit vpn and now i cant go back to wifi

    I can not get back to wifi on my 2nd gen ipod because I went into vpn and now it won't let me do wifi.

    To recover from a lost Restrictions passcode:
    - Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
    - Restore to factory settings/new iPod.
    - If you are up to it see:
    How to reset forgotten Restrictions...: Apple Support Communities
    How to reset forgotten Restrictions...: Apple Support Communities

  • 2nd gen iTouch mic support?

    I have a 2nd gen iPod touch (8 gig). I purchased a set of apple earphones with remote and mic. Although the manual for the earphones/mic/remote clearly states that they work with 2nd gen iPod touch I can only get the earphones to work. The iPod won't register that a mic is connected and the remote does not work to advance songs or adjust volume.
    Is there something I'm missing here? The earphones have 3 bands on the jack and the jack is fully inserted into the iPod. I tested them using the "Voice memos" and "iTunes" programs as those are native and I would hope wouldn't involve glitches.
    I also updated iTouch to OS. That didn't seem to help. Is there some sort of setting I'm missing or did Apple goof on the compatibility statements?

    Can anyone help?
    Not here I'm afraid. This is the *Mac OS X Technologies > iSync* forum, which has nothing to do with syncing iPod touch (not iTouch) to Windows PCs.
    Try here: Connecting iPod touch to Windows

Maybe you are looking for

  • Imported from cf but all images are mixed up

    I have downloaded LR for a 30 day trial.  I have succesfully imported images from compact flash memory card. BUT The images have not downloaded in order of the time taken.  I therefore have a jumble of different photo shoots. What do I need to do to

  • Error while generating trigger

    The Triggers PL-SQL code generated is as follows create trigger GROUPS_INS_TRIG before insert on GROUPS for each row begin select GBO_attr_SEQ.nextval into :new.GES_NUMBER from dual; end;; the last ; is not waited by the compiler. One way of coping i

  • What is lost when syncing to new computer?

    I know questions like this are asked all the time but I'm not sure exactly what to search for so I figured I'd just create a new post. When syncing to a new computer, what exactly is removed from the iPhone. I don't really care if I lose all of my mu

  • Comment télécharger et installer le logiciel ADOBE Photoshop Eléments 12, avec un mot de passe sur le Imac ?

    J'ai acquis il y a un certain temps le logiciel Adobe Photoshop Eléments 12.  Cependant, j'ai récemment remplacé mon PC pour un Imac et j'ai des problèmes à installer ce logiciel, en dépit du fait que je sois muni d'un numéro de série qui correspond

  • E&A Metricset Creation Issue

    Hi, I am facing an issue while creating metric set.Below is my scenario I have One dimension and eleven dimension members.I have created a measure which is applicable to each dimension members.Usually when i create a metric set,under the dimension co