2nd gen nano not recognized by XP or iTunes
Situation:
2nd gen nano with Nike+ will not appear in Device Manager nor charge. In essence, the XP pro computer does not see the nano at all. However, Nike+ still works, the nano still works in an iHome clock radio and it will beep when connected to a dock.
Troubleshooting:
* 5Rs attempted - however, since the PC Device Manager will not see the nano, I can't issue any restore commands.
* even with nano in disk mode, PC does not see it
* older first gen nano still works properly with same iTunes environment.
Has the USB on the newer nano gone bye-bye?
Start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
http://support.apple.com/kb/TS1493
Cheers,
Patrick
Similar Messages
-
2nd gen nano not recognized by MBA / Lion 10.7.4 / iTunes 10.6.3
I have this 2nd gen nano (and a bunch of other ones) set to manage music manually. This particular device has worked fine while connected to MBP mid 2010 running SL and most recent iTunes.
But, this 2nd gen nano does not show up on the MacBook Air, mid-2011, running Lion 10.7.4, iTunes 10.6.3.
I have reset the nano. It plays fine, responds to setting changes properly and it does charge while plugged into either USB port of the MBA. The computer is plugged into wall juice, and the other USB port is not in use while I try to get the nano recognized.
Disk utility does not see it either.
This MBA is not the computer I usually sync this 2nd gen nano to since that machine (the MBP mid 2010) is out for repair.
i expected iTunes on this MBA to just mount the thing (since the iPod has the manual preference set, and is a Mac-formatted nano) and that it would then let me delete a few picks and drag a few newer tunes onto it.
The MBA, the nano and my out-for-repair MBP all have the same Apple ID associated with purchased music on the devices.
I rarely reload this nano and haven't actually changed its music since I put the MBP to Lion, so I am not sure if it's Lion, iTunes or the MBA that is the issue with this 2nd gen nano.
After the 2nd nano would not mount, I tried two other iPods, one is a 3rd gen nano and the other is a Classic. Both of them connected fine and let me drag stuff onto them.
So it seems that either Lion 10.7.4 or iTunes 10.6.3 does not feel like recognizing the 2nd gen nano. Hope this can be fixed. That model nano is practically indestructible and there are still lots of them out there!Update on the above:
I did some more research on this using assorted of my 2nd gen nanos and a couple 1st gen ones as well.
It's only the 2GB 2nd gen nanos MA477LL part number, that do not work with Lion / 10.7.4 / iTunes 10.6.3.
2nd gen MA477LL does not work, it's a 2GB model. I have two of these. Neither works.
2nd gen MA428LL works it is a 4GB model
2nd gen MA426LL works it is a 4GB model
1st gen MA352LL works - it's a 1st gen nano refurb (1GB)
1st gen MA350LL (1GB) - this is another 1st gen nano refurb, but one that's formatted for Windows (and had nothing on it when I connected it). For some reason it mounted fine in Mac iTunes environment and even let me drag an AAC track onto it. I was dumbfounded. On the desktop, its sys info showed info like any FAT32 flashdrive but it did have an iPod nano icon on it. I ejected it from iTunes and plugged in a pair of earbuds and hit play on the track. It plays fine. Go figure! I rechecked the settings in the device. It does say Windows for the format. I feel like I'm in the Bermuda triangle. I might have to reformat it next time a Windows iTunes setup sees that nano though.
So bottom line here with the second gen nanos: it's the 2GB model, the 2nd gen nanos with model MA477LL that do not work in Lion and iTunes 10.6.3 for whatever reason. Both of my devices with that model number do work fine on an older MBA running Snow Leopard and iTunes 10.4. -
2nd gen nano not recognized on computer or i-tunes
We have 3 nano's in the house; 2 first gen's and 1 2nd gen. The first gen's are working fine. However, when I connect the 4G 2nd gen into the computer (any computer...3 of them...)it is not recognized by the computer, i-tunes, anywhere! Won't even charge from computer. Will plug, play and charge in i-home, but not on computer. I have done the 5 R's (except restore because the computer won't recongnize it...); reinstalled i-tunes; reset, forced to disk mode, etc. I'm out of ideas. 4 months out of warranty of course! Anyone know what to do?
Hello bigbthomson,
Thanks for using Apple Support Communities.
If your iPod touch is displaying that it is disabled and to connect to iTunes, then please see the information in the article linked to below.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Take care,
Alex H. -
Problem 2nd gen nano not recognized by Belkin TuneBase FM transmitter
Anyone having trouble with the Nano 2nd Gen connecting and playing on a Belkin TuneBase FM Transmitter? I can only imagine the latest itunes update may have changed some setting? Any thoughts...Thanks
Did your iPod Nano play previously on Belkin? Have you contacted Belkin?
-
6th gen nano not recognized by win7, nor itunes
i've been using my 6th gen nano for a few months now with no problems. suddenly today, i plugged it in and it wasn't recognized by windows and doesn't show up in itunes.
i keep getting errors stating the unknown device is not recognized. i've uninstalled and reinstalled drivers in the Device Manager. i've tried everything on this support page: http://support.apple.com/kb/TS1538. i've also uninstalled, reset, and reinstalled itunes...twice. i've also reset the 6th gen nano several times by holding down the - volume button and sleep button.
the weird thing is, when i plug in my 2nd gen shuffle, it's instantly recognized by win7 and itunes. same thing for my 1st gen nano (using the same cable and USB port).
itunes 10.1.1.4Start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
http://support.apple.com/kb/TS1493
Cheers,
Patrick -
Ipod shuffle (2nd gen.) not recognized by my powerbook (g4)
My new iPod shuffle (2nd gen.) not recognized by my powerbook (g4). Get error message "The disk you inserted was not readable by this computer". It works just fine with my iMac (g4). If iTunes is open the shuffle is just not recognized. Have tried my shuffle on a friend's PowerBook (Intel based) and it works fine. His new shuffle behaves exactly like mine on my powerbook. All other uses with USB ports appear fine - flash drives etc. I did initialize a new flash drive with 128 bit encryption before the 1st attempt to initialize my new shuffle.
Help! ThanksDoes it show in Apple System Profiler's USB tree? Have you tried connecting it (through its dock) to another computer?
-
iPod shuffle 2nd Gen is not recognized on PC, but other shuffles are. Software is updated. Is this the end of the road for this particular shuffle?
Hi envisionquest,
I'm sorry to hear you are having issues with your iPod. If your 2nd Gen iPod shuffle isn't being recognized by iTunes (but other are), you may find the troubleshooting steps outlined in the following Troubleshooting Assistant helpful:
Apple - Support - iPod - iPod shuffle (2nd generation) Troubleshooting
Regards,
- Brenden -
6th Gen Nano not recognized by itunes 11.3
Hello Diablo6vct,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning device recognition issues:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Symptoms
Your iPhone, iPad, or iPod touch may not appear under Devices in iTunes after you connect it to your Windows PC. Any of the following may also occur:
The device cannot be restored in iTunes.
An exclamation point, question mark, plug symbol, or "X" appears next to the device's entry in Device Manager.
During an update or restore, the device may no longer be recognized by iTunes.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
5th Gen Ipod not recognized by windows or itunes. Have tried it all. Any Ideas?
Hello everyone. I have a 5th generation Ipod I recently purchased that I'm having what seems to be an common issue. When I connect the ipod to my computer via USB, the Ipod is not recognized in windows or Itunes. Occasionally the Ipod will charge when connected but not always. Though this is the same for the old wire I used and the new one I purchased today. Even when shown charging the Ipod is not recognized and there is no noise that a device has been connected. I have tried the 4 R's (without Restore) which I can't do, chaninging the drive letter, disabling start up software,uninstalling and reinstalling all Apple Software. I have tried connecting to another computer and have gotten the same result. When I check the diagnostic screen on the ipod it shows that a usb cable is detected. I have upgraded all my driver software, disabled and reenabled them. I'm almost 3 hours from the nearest store so that it out of the question. I'm curious if anyone has any other ideas and will try anything you think might be the issue and fix. Thank you for time.
From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes. Those affected have been exhausted by this ongoing issue. To update or not to update? And I always say never update unless you have to, and turn off all that auto update mess!
I have two core2duo lappies running 32b vista. My workflow dictates 32b fyi. One is acer aspire running itunes v 11.1 (.0.126), 5th gen nano was originally formatted and works just fine on this machine to this day. My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12) Windows mounts it just fine. itunes is not having it. no shirt no shoes no service.
I have both a 4th and 5th gen nano. The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad! Weird huh? I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
I'm at a loss on the thinkpad. Scanned for intruders. Cut the Lenovo bloat. Executed system and reg maintenance. Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail. NO NO NO. Every single dang port, every time on the thinkpad. Has me feeling like others might get the same treatment by the next itunes update. :|
So in summary for me:
5th gen nano and thinkpad are a NoGo on 11.1^ last working version for me = 11.0.1
5th gen nano is working on an acer aspire 11.1.0 but no way in the world am I updating
4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod? -
Ipod Nano not recognized by computer (or itunes) but charging.. so connected
worked until this am (though I think I had this once before, a couple years ago, too often follows itunes updates)
connected to computer (win 7) this morning and it is not recognized by computer (or itunes)
can't find it looking in Explorer
but, it is charging so... it is connected
have tried everything except re-installing itunes... if the computer is not seeing it, and it shows the connection when itunes isn't open...
would that make any difference?diagnostic shows....
**** Device Connectivity Tests ****
iPodService 11.3.1.2 (x64) is currently running.
iTunesHelper 11.3.1.2 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod nano (4th Generation) running firmware version 1.0.4
Serial Number: Y(I removed info)
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
it looks like everything is fine, except it can't find the ipod... why?
when I plug in a thumb drive, it recognizes that, why not the ipod? -
7th gen nano not recognized by windows 8.1 as a drive OR itunes
When i plug in (USB) my 7th gen nano, my PC (Windows 8.1) doesn't recognize it as a drive (it pops up as a drive for about 2 seconds then goes away) and itunes says its detected but cant be identified properly. My 4th gen nano connects just fine.
Hello Quantum222,
Thank you for the details of the issue you are experiencing with your iPod nano (7th generation) and iTunes. I reommend reviewing the articles below for the issue you described:
iPod nano not appearing in iTunes
http://www.apple.com/support/ipodnano/assistant/itunes/
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
Ipod shuffle 2nd gen suddenly not recognized by itunes, any ideas?
My 2nd gen shuffle is suddenly not recognized by itunes, all troubleshooting done per apple support, ie make sure cords plugged firmly, try all usb ports, try different cord etc... any ideas?
Hello,
I had a similar problem. I posted my problem in this link:
http://discussions.apple.com/thread.jspa?threadID=836301&tstart=0
Would you read that and see if it sounds like something you're experiencing? If so maybe we can both scream for help on here at the same time, and get some answers! -
HT1369 2nd gen nano not reconized in windows
why does my computer (windows) suddenly not recognize my 2nd generation nano but still recognize my ipod touch?
Refer to this article:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363 -
How to reformat Ipod Nano 5th gen when not recognized by Windows or iTunes?
I've done all the steps on the site to correct this problem up until the reformatiing part except I tried to update the driver software but Windows says that it encounters an error when trying to install the new software.
So after going through the steps I noticed that the iPod I just bought was formatted for Mac. It says that in order for me to reformat, I have to restore my iPod in iTunes but since it isn't recognized my my computer or iTunes, I can't do it.
Suggestions anyone?Hello there, HateKnuckle.
The following Knowledge Base article offers a pretty thorough step-by-step for troubleshooting your issue:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
7th generation nano not recognized by computer or iTunes
iTunes not recognicing my new NANO 7th Generation in the Device list in iTunes
diagnostic shows....
**** Device Connectivity Tests ****
iPodService 11.3.1.2 (x64) is currently running.
iTunesHelper 11.3.1.2 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod nano (4th Generation) running firmware version 1.0.4
Serial Number: Y(I removed info)
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
it looks like everything is fine, except it can't find the ipod... why?
when I plug in a thumb drive, it recognizes that, why not the ipod?
Maybe you are looking for
-
Why can't I preview indd files within InDesign's open file dialog box?
Hello all, It is bad enough that Adobe doesn't add a plugin to preview any Adobe source file within Windows Explorer (well, except for PDF but I think Microsoft did that). But I find it ridiculous that I cannot preview .indd source files inside InDes
-
Hi all, Anybody has any information on the Oracle BPM Best Practices? Any guide?
-
Using a SCC counter pulse train to control a SCC digital out signal
I am trying to send a digital high signal on a SCC-Digital ouput module for a certain number of pulses generated by a SCC-Counter/timer pulse train. I have found examples of how to route such signals through PFI12 etc on an M-series board but I am tr
-
I just got an iPhone 4 and its the first iPhone I've owned. I'm wondering if it's possible to organize my photos and downloaded images into different albums. I'm an organizer and it's driving me crazy that everything is lumped together. It may be a r
-
I am passing variables to a preparedStatement (in a class) and want to return a ResultSet with the same preparedStatement. I use the same variables twice in the preparedStatment. Ex. getHist.setString(1, fp); getHist.setString(2, week_no);