2nd gen shuffle not recognized by iTunes or reset utility. Strange blinking

Shuffle was working fine. My cat chewed the wire on the dock in half. So I ran the battery down and ordered another dock (well, not actually a doc, but a retractable aftermarket USB connector). Finally got the connector. Before using, I tried to turn on ipod. No light whatsoever, not even red. Plugged it in. Would blink red a couple times, then green a couple times, and then the blinking would stop. iTunes didn't recognize it. Neither did the reset utility. So friggin annoying. What should I do now.

Put it on the dock connector, connect it to your computer, and charge it for at least 30 minutes then see if your computer can see it.
Message was edited by: deggie

Similar Messages

  • Ipod shuffle 2nd gen suddenly not recognized by itunes, any ideas?

    My 2nd gen shuffle is suddenly not recognized by itunes, all troubleshooting done per apple support, ie make sure cords plugged firmly, try all usb ports, try different cord etc... any ideas?

    Hello,
    I had a similar problem. I posted my problem in this link:
    http://discussions.apple.com/thread.jspa?threadID=836301&tstart=0
    Would you read that and see if it sounds like something you're experiencing? If so maybe we can both scream for help on here at the same time, and get some answers!

  • 2nd Gen iPod not recognized by iTunes

    Up until yesterday, when I plug my iPod in to its USB plug on the PC, iTunes would open and I can see my iPod - all of a sudden, when I plug it into the USB, it starts charging (like it should), but iTunes doesn't open and I if I open it manually, it doesn't see that my iPod is plugged in - anyone know what the deal is???

    I am having the same problem and I can't get any help from IPOD support!!! Please let me know if you find out anything

  • Ipod shuffle (2nd gen.) not recognized by my powerbook (g4)

    My new iPod shuffle (2nd gen.) not recognized by my powerbook (g4). Get error message "The disk you inserted was not readable by this computer". It works just fine with my iMac (g4). If iTunes is open the shuffle is just not recognized. Have tried my shuffle on a friend's PowerBook (Intel based) and it works fine. His new shuffle behaves exactly like mine on my powerbook. All other uses with USB ports appear fine - flash drives etc. I did initialize a new flash drive with 128 bit encryption before the 1st attempt to initialize my new shuffle.
    Help! Thanks

    Does it show in Apple System Profiler's USB tree? Have you tried connecting it (through its dock) to another computer?

  • IPod shuffle 2nd Gen is not recognized on PC, but other shuffles are. Software is updated. Is this the end of the road for this particular shuffle?

    iPod shuffle 2nd Gen is not recognized on PC, but other shuffles are. Software is updated. Is this the end of the road for this particular shuffle?

    Hi envisionquest,
    I'm sorry to hear you are having issues with your iPod. If your 2nd Gen iPod shuffle isn't being recognized by iTunes (but other are), you may find the troubleshooting steps outlined in the following Troubleshooting Assistant helpful:
    Apple - Support - iPod - iPod shuffle (2nd generation) Troubleshooting
    Regards,
    - Brenden

  • My ipod shuffle(2nd gen) is not visible on  itunes, i have downloaded latest version of itunes on my pc, how do i solve the problem ?

    My ipod shuffle(2nd gen) is not visible on  itunes, i have downloaded latest version of itunes on my pc, how do i solve the problem ?

    Hope the below link may help you to fix your issue:
    http://support.apple.com/kb/TS3716

  • 1st Gen iTouch not recognized by iTunes on Laptop

    I have a 1st Gen iTouch that I cannot seem to get iTunes to recognize.
    About a week ago I re-named it in iTunes, cleaned it up, and performed a sync.
    Used it until the battery was low, and re-charged using my wall charger. Now, when I connect to the laptop, is is not recognized at all...
    I have tried the following to no avail:
    Re-install iTunes
    Stop/Start the Apple Mobile Device
    Try a different USB cable
    Re-boot the laptop with USB devices not plugged in
    Force the iTouch into recovery mode (http://support.apple.com/kb/HT1808)
    Try to connect using a different laptop
    It still charges when connected to my wall charger. I have a 2nd gen iTouch that connects just fine (charges & connects to iTunes). I don't what the problem could be?! This iTouch is 1.5 years old and work great apart from this issue. Can anyone help?

     
    gltg wrote:
    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes
    I have spent 3 days messing with my pc and have made no real progress.
    Then it's time to call Apple tech support while you are still under warranty.  Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.   If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

  • Ipod nano 1st gen is not recognized in itunes 10

    I updated my computer system to leopard 10.5.8 as well as the latest itunes 10. I bought a new ipod nano 6th gen, and it syncs and works fine. The problem I have is my old Ipod. It is detected by my power mac on the desktop only the icon it has is a folder, and when I open it is in blank. I open Itunes 10 and it doesn't appear. And I tried to follow the instructions on apple support, tried all ports, tried reseting the ipod, and it is still not showing up on itunes. Can someone help me with this please?
    Also, a white line showed up on the screen, does that mean the screen is broken? I can still see everything going on normally on the ipod but not where the line comes up (middle of the screen).

     
    gltg wrote:
    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes
    I have spent 3 days messing with my pc and have made no real progress.
    Then it's time to call Apple tech support while you are still under warranty.  Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.   If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

  • Ipod nano 6th gen is not recognized by itunes on a PC running Windows XP professional SP3, itunes 10.2

    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes (but it shows on my pc as a hard disk) weirder still, my ipod nano 3rd gen works just fine on this computer.
    Whats wrong? HELP!!!
    I have spent 3 days messing with my pc and have made no real progress.

     
    gltg wrote:
    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes
    I have spent 3 days messing with my pc and have made no real progress.
    Then it's time to call Apple tech support while you are still under warranty.  Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.   If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

  • IPOD 2N GEN IS  NOT RECOGNIZED BY ITUNES AS BEING CONNECTED

    IPOD 2N GEN NOT RECOGNIZED BY ITUNES . ALSO NO ICON APPEARS IN SYSTEM TRAY. IPOD WILL CHARGE BUT I HAVE NO WAY TO UPDATE! USB PORTS SEEM TO BE WORKING . I HAVE CHECKED I BELIEVE FOR UPDATED DRIVERS. IPOD DIAGNOSTICS SAYS IPOD CONNECTION FAILED . ERROR MESSAGE IS " NO IEE /OR NO IEEC HOST CONTROLLER" BUT COMPUTER DIAGNOSTICS DID NOT SHOW ANY PROBLEMS WITH HOST CONTROLLER ????? CAN ANYONE SEE WHAT THE THE PROBLEM IS????? IPOD USED TO UPDATE WITH NO ISSUES. ( MY APPLE SOFTWARE IS UPDATED )

     
    gltg wrote:
    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes
    I have spent 3 days messing with my pc and have made no real progress.
    Then it's time to call Apple tech support while you are still under warranty.  Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.   If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

  • My 2nd generation shuffle not appearing in itunes.  What can I do?

    my 2nd generation shuffle not appearing in itunes.  What can I do?

    If you have not done so already, first try using a different USB port that is directly on the computer (not a hub). 
    If that does not help, I would shut down (completely power off) your computer.  Disconnect the shuffle and do this reset procedure
    http://support.apple.com/kb/HT1655
    Start up your computer.  Run iTunes.  Try connecting the shuffle again.

  • 2ndd gen Shuffle not recognized in OSX/iTunes after OSX/Itunes update

    After updating two iMacs to 10.6.5 and iTunes 10.1 my 2nd gen Shuffle isn't recognized on either.
    1. It still plays music so I know it's not dead
    2. It stopped syncing after updating but not sure which update could be the cause.
    3. I've tried rebooting the computer(s)
    4. I've tried the iPod restore utility and it doesn't recognize the iPod at all.
    Is there anything else I've missed?

    I've had this exact issue for a couple of weeks. I finally managed to drive the hour+ to our nearest Apple store. To my great frustration they were able to have my Shuffle connect perfectly to their machine, yet it still is not recognized by my Intel Mini or my hubby's PC. It sits in the cradle and flashes yellow like it's charging, but is otherwise unrecognized by my computer. When I try the reset utility it is "aware" that my Shuffle is there, but cannot retrieve serial # data or disk spaced used...the iPod is never ready for reset.
    At this point I don't know what to do...buy a new 4th gen. Shuffle in the hopes that it works? I'm not sure if the issue is with my iPod or my computer or iTunes.... I'm contemplating switching to another player entirely, even if it means having to burn all my music to CDs and reimport as Mp3s.
    Adding to my frustration, I purchased my Shuffle only in April from SmallDog.com. I purchased what was SUPPOSED to be a brand new, with full warranty Shuffle. I found out today that the iPod was registered almost 2 years ago when Small Dog received it and stocked it in their warehouse, so I essentially paid full price for a shuffle sans warranty. Apparently Small Dog is not the only company that pulls this BS. A purchase may not be warrantied for a full year (or for any time) from anyone other than Apple.

  • IPod touch 2nd gen will not open in iTunes. Ideas?

    I upgrading the latest version of iTunes and I went to sync my iPod touch 2nd gen to get my latest podcasts and it would not sync or even recognize in iTunes. My PC recognizes the drive. But iTunes is a no go. I suspected it was just the latest version of iTunes so I downgraded back to the previous version and got the same results. I've switched USB ports, cables and have restarted numerous times. I even uninstalled the device from the device manager but nothing is working. Any help would be greatly appreciated. Thanks!
    Garrey

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates

  • 2nd gen Shuffle not syncing blinks green and orange

    My mom got a new computer. I installed Itunes and connected her 2nd gen Shuffle which previously had been administrated by her niece's computer. I deleted all music,restored to factory settings, bought new music but am unable to get music on her shuffle. Her shuffle appears in Itunes sidebar and in computer. Says it is syncing but no music is on Shuffle. Light blinks green and orange, green, orange. Troubleshoot says "current user not administrator". I followed steps in relevant topics but still no music on Shuffle. HELP

    Try this page http://support.apple.com/kb/ht1238

  • 2nd gen shuffle not working windows 7

    I connected my 2nd gen shuffle to my laptop (Windows 7) and it told me I need to restore it, but Itunes keeps crashing every time i tried. I restared my pc, then it stopped showing in Itunes but showed on devices, and was on. Now it does nothing at all, no lights or anything. Any help appreciated

    I have two suggestions.  There is an iPod Reset Utility
    http://support.apple.com/kb/HT1238
    that is only for the 1st and 2nd gen shuffle.  It does something like a Restore in iTunes, but works at a "lower" level in cases when a Restore in iTunes does not work (or cannot be used).  For it to work, the shuffle does need to be seen by the system, and it sounds like yours meets that requirement.
    Unfortunately, I don't think it works with Windows 7.  If you happen to have an older PC with 32-bit Windows, you can use that PC to run the utility on the shuffle.  Or, maybe you have a friend with a Mac or 32-bit Windows PC that can run it for your.  Or, if you have an Apple Store nearby, you can make a reservation at the Genius Bar and ask them to look at it and run the reset utility.
    The second suggestion, if you don't have a convenient way to use the reset utility, is to use Windows to reformat the shuffle's storage like it was a flash drive.  Use a "full" format (not the "quick" option).  Use the "FAT" format type.  Make sure iTunes is NOT running.  After it is reformatted, it will be blank.  When you run iTunes, it should recognize the shuffle and ask you to Restore it (to re-install the software and set it to default settings).  Hopefully, it will work this time.

Maybe you are looking for

  • DW 8 dif from DW MX w/ css & sites: help!

    I finally upgraded to Dreamweaver 8 (yes, I've been avoiding it.: too many projects, no time for learning curve). I've tried using it a bit and it's already driving me nuts. I feel like an idiot for writing this posting because these most likely have

  • ItemRenderer using ClassFactory

    Hi, I am having a problem using item render in a DataGrid using ClassFactory. I am using a custom item render. I have made this custom itemrender implementing the IFactory Interface. --MyItemRenderer.mxml-- <mx:Hbox implements="mx.core.IFactory"> <mx

  • Quadro FX Can not Active Mercury Playback Engine in Pr CS5

    I work on Windows7 64Bit and installed Quadro FX 4800 Updated lastest Quadro Driver  259.57 but the button of Mercury Playback is always grayed out How to fix it?

  • WLC ACL Problem

    Hi all, I'm having problems when trying to apply an ACL to my WLC dynamic interfaces. I have three WLANs that I wish to keep separated and am using ACLs that I have configured on the controller, the only problem is they don't seem to work! Ping test

  • Audio File Storage

    I loaded a large number of songs from an external hard drive into my iTunes libary via the "Add To Libary' option in the File Tab in iTunes. I then realised that it was taking up too much space (by looking in the About This Mac>More Info>Storage) on