2nd generation ipod with error code

When I try to sync my ipod and itunes, I come up with error code -48. Won't sync. Everything was already updated, I've tried virtually everything with the exception of restore. Would like for that to be last option. Can anyone help me out???

Try on another computer
Then see:
-1 error
-1 error too
If still problem means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

FPGA Code Generation fails with error codes 7 and -1

Hi all,
I have been having a weird issue with my LV FPGA compilation in the last couple of days, no matter what I try to compile LV fails to generate the FPGA code files and returns with errors 7 and -1 and complains that the file is not found. This happens no matter what I am trying to compile even a VI with just a while loop. I followed the discussion forum here without any luck, also followed the NI article here and that did not help either. The error codes always get generated at the start of the Generating Intermediate files step #7 (out of 7).
Attached to this post is a screenshot of the error I am getting (error -1 just says internal error and to contact NI support), bellow is basically the error I get for error code 7
An internal software error has occurred. Please contact National Instruments technical support at ni.com/support with the following information:
Error 7 occurred at Read from Text File in nirviGetInstantiation_cRIO-IDSel_Timer.vi->nirviGetInstantiation_cRIO-IDSel_Timer.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface.
C:\NIFPGA\compilation\cRioController_8-SlotFPGA_FPGA-TriggerTest_C06156E2\IDSel_Timer.vhd
I tried to do some digging to see what could possibly be happening, and I noticed that LV is looking for the vhdl files in the wrong folder (see the line highlighted in red above), when generating the vhdl files, LV will place them inside the "source_files" folder under the compilation project, but for some reason it is trying to find them under the root folder not inside the source_files folder!!!
Does anyone have any idea why LV would be looking for these files in the wrong subfolder?
Thank you,
Aws
Attachments:
Code Generation Errors.png ‏35 KB

Hi Aws_Khudhair,
What version of LabVIEW are you using? And what version of the FPGA module? From what I found, it seems as though this is primarily an issue with LabVIEW 8.6 and 8.6.1.
http://digital.ni.com/public.nsf/allkb/A711119FE89E39E78625754E00075E92
This forum also discusses a similar issue:
http://forums.ni.com/t5/Real-Time-Measurement-and/FPGA-compile-errors-after-generating-intemediate-f...
It may also be worth repairing/reinstalling the FPGA Module and the Xilinx compile tools.
Catherine B.
Applications Engineer
National Instruments

2nd Generation iPod with frozen Apple logo

Tried to reset this iPod using the menu/play button technique. Just returns to logo. When I plug into USB, iTunes doesn't recognize and neither does my computer. Stuck and don't know what to do.

That sounds like the 3rd gen iPod. However, it is designed to work with FireWire as well. It may sync over USB if the battery is topped off, but it does not charge over USB. The only way to use USB is to use this special two-ended cable that has both a FireWire and USB connector.
http://store.apple.com/us/product/M9688G/A?mco=MTIxODk3Mw
The USB end goes to the USB port on the computer. The FireWire end goes to the square white wall power adapter to supply power to the iPod while it syncs.

I have a 2nd generation Ipod and would like to get a 4th generation Ipod, will I loose all my apps if I do?

I have a 2nd generation Ipod with lots of apps (free and paid). I would like to get a 4th generation Ipod but do not know if I will loose all my apps or not? Can any one tell me?

You will not lose your Apps. They can be reloaded onto your new iPod Touch.

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
Above from:
http://support.apple.com/kb/TS3694
You also may have to place the iPod in recovery mode. For how see:
iPhone and iPod touch: Unable to update or restore

My 2nd generation ipod touch almost completes update of version 4 then error code 3259. any advice to help. Seems to download but problem when processing

2nd generation ipod touch shows error message 3259 when trying to update with version 4 software from itunes. Looks as though downloading update but problem when processing. Any advice? thanks

Try here. If not successful, try looking at the previous posts on the right under the heading: More Like This that have your same problem Start with the one with the green checkmark.
iTunes Store reporting error - 3259

ITunes is getting my brother's 2nd generation iPod mixed up with mine!

I got a 1st Generation iPod Nano for Christmas last year. It has been working great, and I've experienced few problems. For Christmas this year, my brother got the 2nd Generation iPod Nano. We both have seprate iTunes libraries in our seprate accounts on the computer. I was uploading songs from his library onto his iPod for him. As soon as iTunes said "Okay to disconnect" I did so, and then closed out of iTunes, logged off his account, and signed onto mine. I opened my iTunes, and plugged in my iPod, and where the summary of the iPod showed up, it said "Erich's iPod" instead of mine. I thought this was strange so I clicked it, and all of my brothers library was replacing mine on my iPod! I unplugged my iPod and checked it. It still had the name I had given it, but iTunes had it all mixed up. Is there anything I can do to make sure only my library is uploaded onto my iPod when i plug it in, and make sure that my iPod is recognized instead of my brother's?

See the following for actions to take for the common error codes.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
If you need more help come back with the error coade and what you tried.

I have a 2nd generation iPod that only displays an image of the cord, and an arrow to connect to iTunes. I've done this and it says it needs to be restored. Tried that but I get an error: 1611. Any suggestions?

I have a 2nd generation iPod that won't do anything but display the Apple logo for a brief second then an image of the cord suggesting it should be connected to iTunes. I tried to restore it via iTunes but I get an Error: 1611. It does nothing else. I tried turning off using both buttons...nothing. Any suggestions?

Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
Above from:
http://support.apple.com/kb/TS3694#error1611
Note it could be a hardware problem

Just found my lost from 2008 2nd generation ipod touch. cant update error occurs every time. fix?

while moving out i found my ipod that i lost back in 2008 so it obviously hasnt been updated since. but now it wont allow me to update. i even erased and reset the ipod to factory and still cant update. am i stuck with ios2.12 or is there something i can do to at least update it to the last available update for the 2nd generation ipod?

What does the error message say?
Are you sure you have a 2G iPod? The 2G iPod has an internal speaker and volume buttons on the upper left edge while the 1G does not. The 1G can only go to iOS 2.1.2 via iTunes and as high as 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage

2nd generation ipod touch wont update to current ios . Keeps getting a -1 error.

I bought a 2nd generation Ipod touch from my cousin for my niece and I have completely reset it . Now i am trying to install the newest iOS from 2.2.1 to 4.2 . I keep getting "an unknown erroe occured (-1) " . I looked it up on the website and tried everything I could and that I know how to and nothing worked . Is there something i am missing??? Any help would greatly appreciated !!!!!

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
Note The "May nned service" means a hardware problem.

I have a 2nd generation Ipod. I have it connected to my computer and see (my name) ipod on my screen. Everytime I try to add a new song to the Ipod, this message comes up and I am not sure what to do: The Ipod, (my name) is synced with another ITunes li

I have a 2nd generation Ipod.
I have it connected to my computer and see (my name) ipod on my screen.
Everytime I try to add a new song to the Ipod, this message comes up and I am not sure what to do:
The Ipod, (my name) is synced with another ITunes library on A74F65. Do you want to erase this Ipod and sync with this ITunes Library?
An Ipod can be synced with only one ITunes library at a time. Erasing and syncing replaces the contents of this IPod with the contents of this ITunes library.
Then it asks me if I want to delete and sync.
I am not sure what to do for fear of erasing everything I have put on my Ipod.
I would appreciate if someone could help me out.

If I understand you correctly, you are trying to use iTunes to play the Music in your iPod but which is not in your itunes library. I don't think Apple design iTunes for use in your way. As to put and play music in iPod, the music has to be in iTunes first, so you play music in the iTunes music Library. the window with Ipod music is just to show you which music are already in the Ipod, in case you want to Manually Manage your huge music library.
Here is the iPod/iTunes manual from the Apple Support Site.
http://manuals.info.apple.com/en_US/iPod_Features_Guide.pdf
Have A NICE DAY!

TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networ

My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.

Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time

Do you know of any kids games apps compatible with 2nd generation iPod?

Do you know of any kids games apps compatible with 2nd generation iPod? wanted to put some kids games on but they all say they are not supported by iOS 4.2.1. which is the latest ios it can be updated to. I get the message This app requires openGL ES 2.0 graphics capability. Can you tell me if there are any games I could download for him please?
If there aren't can you tell me if an ipod touch 3rd generation would be able to get alot of the current games like the lego ones and angry birds or which generation I would have to go to.
Many Thanks

- These sites allow you to filter searchs for those apps compatible with 4.2.1
iOSSearch - search the iTunes store for compatible apps.
Apple Club - filter apps by iOS version.
- However, some apps currently in th app require a higer iOS version. But, as I posint out in my previous reply, Apple allows yo to downlod the last compatilbe version
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.
I know of no list/seach method to find those apps

TS1369 2nd generations Ipod Shuffle with Windows 8?

How do you get a 2nd generations Ipod Shuffle compatible with Windows 8? (it works on just fine in earlier versions)
If you plug it in through a USB connection it blinks orange/green really really fast. It is not recognized neither by Itunes or Windows (PC), Not recognized nor taking any charge.
I first thought it just came to the end of its life, but then plugging it in with my old laptom (Windows XP) and another laptop (Widows Vista) it worked just fine.
I have the newest version of all my software, so this has to be a driver compatibility issue, the question has Apple solved it yet?

I asked about the USB docking cable because some folks who also have a 3rd or 4th gen shuffle were trying to use the cable from those shuffles with a 2nd gen shuffle. Or they bought a replacement part that is for the 3rd or 4th gen shuffle. It fits, but the connector is different, so it does not work.
You have determined that the shuffle and its cable work properly when connected to a different computer. Since the Windows 8 computer is a new computer that was not used with this shuffle before, the cause could be related to the computer's hardware or software.
As a test, if you have another device that is similar to an iPod, such as a USB flash drive or a mini external hard drive that is powered by the USB port (not something low-power like a mouse or keyboard), connect it to the computer's USB port to confirm the port does generally work for other things.
If the USB port is confirmed to work for other devices, if you have a USB hub, as another test, connect the hub to the USB port. Perferably, the hub is the type that is self-powered (has its own power supply). Connect the shuffle to the hub to see if that makes any difference if the hub is between the iPod and the computer.

How do I connect my 2nd generation Ipod to a Firewire 800 port? It no longer holds a charge and it doesn't power up with the newer generation USB cable. The only way I can sync my Itunes library onto this Ipod is when it is powered...

How do I connect my 2nd generation Ipod to a Firewire 800 port on a new laptop? It no longer holds a charge and it doesn't power up with the newer generation USB cable. The only way I can sync my Itunes library onto this Ipod is when it is powered and connected simultaneously. Pls help.

Try here:
iOS: Not responding or does not turn on
If not successful then time for an appointment at the Genius Bar of an Apple store.

2nd generation ipod with error code

Similar Messages

Maybe you are looking for