2nd Hand iPod just purchased but can't get it to work on PC - help!?

I have just purchased a 2nd hand Ipod Nano 4GB 3rd generation. It is loaded with a 1000 songs but I would like to remove some of them and add my own. When I connect it to my PC, it comes up but everything is greyed out. Does this mean I can't do anything with it except listen to whats on there? Any help would be appreciated. Thanks

They don't make an OS X version of their software.

Similar Messages

  • Just got photoshop CC but can't get 3D to work. Any help greatly appreciated.

    Just got photoshop CC but can't get 3D to work. Any help greatly appreciated.

    Do you have a video card with at least 512 MB of vRAM?
    I only have 256 MB vRAM on my older iMac and still have 3D capability in PS CS5, but not in PS CC. The newer versions of PS require 512 MB in order to enable 3D.

  • HT4528 just bought a ringtone app but can not get it to work

    just bought a ringtone app but can not get it to work, I can get to putting on my desktop but after that it wont tranfer to my "tones"
    Angela

    Contact the app developer for support.

  • Got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

    got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

    If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it

  • Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?

    Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?

    Welcome to the Apple Community.
    The iPad 1 is only able to do basic AirPlay, many providers of programming have blocked their apps from working with AirPlay.

  • I have all my music under my user id.  i would like for my wife to have access under her user id.  i tried using Home Sharing but can't get it to work.

    i have all my music under my user id.  i would like for my wife to have access under her user id.  i tried using Home Sharing but can't get it to work.

    http://support.apple.com/kb/HT3819 homesharing
    http://support.apple.com/kb/TS2972 troubleshooting home sharing.
    i <3 Homesharing. I enabled it at home, and where I work I use a mac so I enabled it on that computer as well so I can listen to my own music library while on breaks/lunch =)

  • Has anyone used reMIDI as a plug-in for GarageBand. I downloaded a trial version of reMIDI, which enables MIDI instruments to be strummed or arpegiated, but can't get it to work in Garageband.  How do I set it up?

    Has anyone used reMIDI as a plug-in for Garageband ('08)? The program allows MIDI instruments to be strummed or arpegiated. I have a trial version, but can't get it to work in Garageband. Wonder how to set it up.
    Thanks, Doctor Mark

    Port Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
    It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
    Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
    In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
    But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course.

  • I have photoshop cs6 extended but can't get 3d to work. how do I fix it?

    I have photoshop cs6 extended but can't get 3d to work. how do I fix it?

    on a mac btw

  • I purchase the Forms plus,  bywidgets.mu, and can't get it to work.  any help?

    I purchase the Forms + bywidgets.mu
    I've followed the directions on the weblink (https://widgets.mu/se/FormsPlus/demo/)
    and still can't get anything to work.
    I just keep getting <> inside a box and that's it.
    Help please!

    Hi Lisa,
    Do you have a URL where I can take a look at the issue? It may be a configuration issue or it may be a bug so I just want to check and make sure.
    In terms of the radio buttons one, I just published up update to the Forms+ Widget this morning that includes a new way to do grouping for radio buttons. Creative Cloud should download the updated version of the .mulib file into your downloads folder (and it should now be called something like FormsPlus Bundle.mulib), and you can double click that to add the updated widgets to your Muse library. The one I'm referring to in particular is called the "Radio Group (Box Selection)" widget. Basically, when you drag the widget out onto the page, it shows a dotted line box and you simply drag and resize the box around the radio items you'd like to group together. The box itself won't be exported so you don't have to worry about that, but it will allow you to visually group them instead of doing so with labels.
    Let me know if you have any trouble getting the new update or using the box selection widget and I'd be happy to help further.
    Thanks,
    Andrew

  • Excellent tutorial but can't get it to work

    Hello
    Hope someone can help. I've ben looking for a good calendar
    nugget since the demise of mxKalendar
    The adobe tutorial on blogs has an excellent example of a
    nugget
    http://www.adobe.com/devnet/dreamweaver/articles/php_blog3_03.html
    but I can't get it to work
    It gives a parameter error on the page month forward function
    $calendar .="<td><a
    href=day.php?m=$mn2&y=$yn2&d=$day>></a></td></tr>";
    Has anyone been able to get it to work?
    Any help/guidance appreciated
    ThanksClive

    Have you compared your code to the code in the example files?
    http://www.adobe.com/devnet/dreamweaver/articles/php_blog3.html
    http://download.macromedia.com/pub/developer/blog3_sample.zip
    Ken Ford
    Adobe Community Expert - Dreamweaver
    Fordwebs, LLC
    http://www.fordwebs.com
    "Clive" <[email protected]> wrote in message
    news:fruiu3$7u4$[email protected]..
    > Hello
    > Hope someone can help. I've ben looking for a good
    calendar nugget since
    > the
    > demise of mxKalendar
    > The adobe tutorial on blogs has an excellent example of
    a nugget
    >
    http://www.adobe.com/devnet/dreamweaver/articles/php_blog3_03.html
    > but I can't get it to work
    >
    > It gives a parameter error on the page month forward
    function
    >
    > $calendar .="<td><a
    href=day.php?m=$mn2&y=$yn2&d=$day>></a></td></tr>";
    >
    > Has anyone been able to get it to work?
    > Any help/guidance appreciated
    > ThanksClive
    >
    >

  • T500: Can't get WLAN to work!! HELP

    Hey all, new to the Lenovo community so sorry if I sound like a noob.
    I just bought a Thinkpad T500- 2056 CTO (Vista Business) from a colleague of mine. I searched the internet for the specs of this notebook and saw that it was equipped with an integrated WLAN card but I can't get it to work. I checked the Network Adapters in the Device Manager but there was only an Ethernet Gigabit driver. I tried downloading the only 2 different drivers that Lenovo's Support and Downloads has but that didn't work. Can anyone help me out? I'd greatly appreciate it.

    AHuerta775 wrote:
    I searched the internet for the specs of this notebook and saw that it was equipped with an integrated WLAN card
    What specifically did you look at on the internet to determine the spects of a  2056-CTO ?
    Cheers,
    Bill
    I don't work for Lenovo

  • All but 5-6 of my songs have been deleted from my ipod shuffle.  I can find the list in purchased but can't get them on my device.

    Allbut 5-6 of my 44 songs on my Ipod shuffle have been deleted. They all show up on my purchases but I can't transfer them to my Ipod shuffle device.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
      - Restore to factory settings/new iOS device.

  • Downloaded current ipod updater? check. but can't get it to work.

    (I apologize in advance if this has already been addressed/answered.)
    I've downloaded the most recent update for ipod, it's installed in my computer but I can't get it to run. It always prompts me to restart my computer, which I do...then nothing. It's this constant cycle of trying to get the update to run and nothing works. Also, I've noticed my computer runs really slow and keeps freezing while I attempt to do this - I don't know if that's related.
    2. I can't get my computer to recognize my iPod. I've tried ALL (and I do mean all of them...repeatedly!) of the steps the website offered (try a different USB port etc., rename the disk drive -- only problem being the computer doesn't recognize the F drive or whatever is associated with my ipod) plus some of the tips offered on this forum (there are some really helpful & knowledgeable folks here!) and nothing.
    It's driving me insane. As much as I try and solve it myself, I'm starting to get really confused.
    Can someone help a girl out?
    -Mary
    Ipod version 3.1 - guess that means 3rd generation?   Windows XP  
      Windows XP  

    Anyone?

  • Installed webutil but can't get it to work - IE just crashes

    As far as I cam make out, I followed the installation instructions, copied files to the right places etc for webutil. But when I try and run my form, IE just crashes out with a runtime error. Has anyone else had this problem? I'm using Forms 10.1.2.02 and IE 8.

    I seem to be getting somewhere now!
    I got past the initial crashing by first of all using the basejpi.htm, and including the jar files in the archive= lines in the config. At runtime I was prompted to accept the RegisterWebutil as coming from a trusted source. I ticked the box 'always trust'. Then I changed my config to use the webutil.htm, and it worked - crashed later, but I got past the initial! I think I might get this to work now. Thanks for the help though especially with the IE settings, as it wouldn't have worked without changing that.

  • Upgraded to Mavericks and installed new iphoto but can't get iphoto to work

    I have not been able to open my iphoto library with the current version after installing Mavericks and purchasing/installing iphoto 9.5
    Here's the system info: iMac (from Dec. 2007)
    2.8 GHz Core duo
    4 GB SDRAM
    OS  X 10.9.1 (as of yesterday)
    Iphoto 08 (7.1.5)   lived on a network drive ( Lacie cloud drive) shared between a pc and a mac.
    Upgraded to 9.5 yesterday
    I used time machine backup before installing Mavericks and proceeded to try to upgrade iphoto. However, I did not make a backup of my system after this installation and before I installed the new iphoto. Does Time machine backup iphoto files located on a network drive? Does it matter that the backup was made with snow leopard and not Mavericks?
    I followed instructions on a thread indicating that iphoto Library upgrader 1.1 should be used to prepare my old library prior to opening with iphoto 9.5. 
    When I double-clicked the upgrader it gave me this message:
    Your library can open with the current version of iPhoto and does not need to be prepared with this tool.
    I noticed that the iphoto icon has already changed from orange to blue.
    OK- great! So I go to the freshly installed iphoto and try to open my library and get this message:
    The photo library needs to be upgraded to work with this version of iPhoto.
    Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete.
    Alright, so I click the upgrade button and I get the beachball of death for about 15 minutes and then see a message that says:
    Examining photo library- Examining with the beachball of death goes on for another 10 minutes and then iphoto just crashes and closes.
    Back to searching through threads- Ah-  try option + cmd while opening iphoto to rebuild the database but then get this message AGAIN:
    The photo library needs to be upgraded to work with this version of iPhoto.
    Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete.
    And so, the cycle continues....
    After reading through a few other discussion I discovered that the iphoto library should have been on a drive formated as Mac OS extended (journaled)
    So- I format an external harddrive as Mac OS extended (journaled) and proceed to copy the iphoto library (234 GB) onto the external harddrive and after about 30 minutes I received this message:
    The operation can’t be completed because an item with the name “iPhoto Library” already exists. I click OK and everything stops and shuts down.
    Is it possible to get rid of Mavericks and go back to my original iphoto 08 using the time machine backup? If so, should I then use the upgrader before installing Mavericks and the new iphoto?
    At this point I have no clue how to proceed.  I am trying not to panic but this process is starting to drive me a little bananas and my brain is slowly, but surely, melting away. 
    Please help save my sanity. Please.
    Thank you.

    The problem is the library has been damaged from sitting on the Network Drive, and frankly, returning to the old OS won't change anything, nor will downgrading iPhoto. You're going to have this issue once you try and move the Library, or update it in any way, and - even if you stick with the old version of iPhoto, you're going to start having issues just saving edits, sharing and so on.
    So, you're between a rock and a hard place.
    I've no idea if TM backs up material on a NAS, but I do know that it can be set to back up externald rives. I'm somewhat surprised that you don't know, as this is your back up system that you created and the easiest route out of this situation. NOw there's only one way to find out.
    So, my first effort would be to try restore the Library from TM to the correctly formatted drive:
    http://support.apple.com/kb/HT4927?viewlocale=en_US&locale=en_US
    will help with that.
    If that doesn't work or is not possible, your next effort is to try rebuild the Library to the correctly formatted drive:
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    If that doesn't work, then you're recovering the masters from the Library and starting over from scratch.

Maybe you are looking for