2nd HDD cable for DV7

Have a Pavilion dv7-6c00 -- It has second bay caddy but no cable.  One of the 4 screws was all F'd up from factory, had to dremel a slot into it to get it out.
Any idea where I can find a cable that fits -- tech support wasnt much help on the phone.  But very polite.

Hi:
I will try to be polite, but helpful as well.
Below is the link to the cable I believe you need.
http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=379
It's pricey, but if you wanna play, you hafta pay.
Paul

Similar Messages

  • Where would i get 2nd hdd cable for hp dv7-series (long cable) that would ship to finland.

    Where would i get 2nd hdd cable for dv7 series (long one) THAT would ship to Finland. (as the subject says eh')

    Hei:
    It depends on where in the dv7 model series your PC falls.
    There are 2 types of second HDD cables. The one Kamat pointed out for the dv7 6xxx series, and then there is this one at the link below for these dv7 series:
     http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=345&zenid=b451f3afd6d86cd...
    So, you will need to know what dv7 you have.
    I believe they ship worldwide. A forum member from Italy got his from here. That is how I know about this site, and all about the fact that there are 2 types of 2nd HDD cables for dv7's. 
    The only part number referenced for a 2nd HDD cable in the service manual is for the dv7-6xxx series.
    Paul

  • ThinkPad 2nd HDD Adapter for T40 -do I need to configure the hard drive?

    I purchased a new Samsung HM160HC hard drive and a Thinkpad 2nd HDD adapter for Ultrabay slim for a Thinkpad T40. When I install the PATA hard drive into the adapter do I need to configure the hard drive as slave, cable select, or leave as master? Any help would be appreciated.   

    Reformat usiing the original install disc then update to v10.6.8.
    Mac OS X 10.6: Reinstalling Mac OS X

  • Re : T400 2764CTO, 2nd HDD Adapter for an Ultrabay Slim, to be used in the DVD bay

    What is the part # for the 2nd HDD Adapter for an Ultrabay Slim, to be used in the DVD bayCan you also confirm it is a SATA connection, I have already been sent an IBM P/N 41U3148 which has the IDE connection and appears not to fit.
    Thanks for help 

    shan_mcarthur wrote:
    Actually, it is entirely accurate.  Here is another related thread with a lot of pictures that demonstrate the problem.  I have 3 Lenovo W520s and 3 useless Lenovo Ultramedia bay adapters.  I cannot tolerate the gap because it causes frequent drive dismounts when I pick up the laptop when it is running or even touching the side.  The newmodeus adapters I purchased to replace the defective Lenovo adapters have been rock solid!  I recommend visiting all the picture links on this thread.  It will clearly demonstrate the problem:
    http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Will-Hard-Drive-Bay-Adapter-II-two-work-in-W52...
    Shan, it isn't entirely correct because we have a lot of W510 and W520 users in my company this doesn't occur with. I am not discounting the problem. I only take exception to the statement that blankets ALL users and ALL hard drive adaptors.  Doing that is incorrect.

  • Need 2nd HDD Caddy for MBP

    I have a MBP 4,1 (MB166, 17" Early 2008), this is the last style before apple went to unibody.
    I'm looking for a 2nd HDD caddy for my comp, all the ones I am finding are only for unibody! Wondering if anyone knows a place to get a pre-unibody one, thanks!

    Do some research on this one. It's listed to fit the 4.1 (and even earlier PowerBooks): http://www.powerbookmedic.com/DualDrive---Add-a-Second-Hard-Drive-to-your-Laptop -p-17316.html

  • 2nd HDD Bracket for SFF P300?

    I recently purchased a Thinkstation P300 SFF machine that came configured with a 3.5" 1TB primary HDD.
    I would now like to add a second 3.5" hard disk drive, but I need a bracket to install it into. That should be simple, right?
    Unfortunately, after multiple calls to Lenovo sales and tech support...nobody can find a part number for this hard drive bracket. I've tried to order it twice - once they sent me a 2.5" HDD bracket that fits in my P300, but won't fit my 3.5" HDD. The second time, they sent me a 3.5" HDD bracket, but the bracket was for the tower version, not the SFF version of the P300.
    According to the system specs and hardware manuals, the SFF P300 will accomodate TWO 3.5" HDD's.  
    It should not take this much trouble to add a second HDD to a "workstation" class machine.
    Can anyone help?  Is there a part number for this thing? Is anyone there?
    Solved!
    Go to Solution.

    1. Yes, my P300 came with a DVD/RW. I think it is standard height. The bracket holding the ODD is 1/2" taller than the bracket holding the primary HDD.
    2.  Yes...the front panel includes a card reader, plus microphone input, headphone output, and 2 USB 3.0 slots.
    It appears to me that there is room in the case for the 2nd HDD - it looks like the bracket for drive #2 has room to be installed against drive #1 (the bracket should allow them to connect together without screws, per the hardware manual).
    I can post photos of the inside and outside of the unit, if that would help.
    The unit I purchased was from CDW...here's the URL for it on their site.
    Oh...and I will need a "bracket kit", including SATA data and power cables. There are only two SATA power cables on the motherboard, and those are both already taken up, so I will need some sort of power cable splitter in order to power both HDD's.
    I suspect that this is an issue on your end...I've contacted both Sales and Support, multiple times, and neither one has been able to find me the bracket kit that I need.
    I'm getting ready to return the P300 to CDW, because if I can't install a 2nd HDD, it's not useful to me. I would prefer to keep it, but not in its present state.
    Thanks.

  • 2nd hdd on pavilion dv7

    Hi, i want to install a second hdd to my dv7 pavilion, but there is a problem... evenif exists space for second hdd it doesnt exist cables to connect the hdd. WHY? anyone can help me? the model is dv7 4170eo.
    thank you in advance

    Hi,
    An example of the sort of kit you need to install a second Hard Drive in your dv7 is on the link below.
    http://newmodeus.com/shop/index.php?main_page=product_info&products_id=345
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Second HDD bracket and interface cable for DV7 3110ea

    I apologize if this has already been covered on here.
    I need a hard drive bracket and interface cable to fit a second SATA HDD. I think the HP part numbers are 611935-001 for the interface and 532591-001 for the bracket.
    Can anyone confirm this and possibly suggest somewhere I could get them from as the HP partmaster site was not much help.
    I have found a few online suppliers of these parts and the prices vary from around £22 to £35 each. I would like to be sure they are the correct parts before ordering them.
    This question was solved.
    View Solution.

    I got the hard drive caddy from here  http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220690235689 They do appear to have more in stock and cost a lot less than other online suppliers I tried.
    The connector was from here http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=260730251819

  • Primary internal hdd cable for HP DV7 - 7099el

    Per favore qualcuno mi potrebbe aiutare? cerco il cavo interno primario ( perche danneggiato ) per il mio notebook HP Pavilion DV7 - 7099el . Ho cercato da pertutto ... ma non lo trovo !!! se qualcuno qui nel forum mi potrebbe postare un link dove trovarlo lo rigrazierei mille . Per favore aiutoooo...
    Spoiler (Highlight to read)
    Spoiler (Highlight to read)

    Hello tizzo37,
    This is an English based support forum, I would like to help you could you please respond in English if possible.
    Please respond back at your earliest convenience.
    Thanks 
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • 2nd HDD on HP DV7 4160sd

    Hello,
    I own an HP Dv7 4160SD,  operating with Windows 7-64 bit. I was wondering what I need to do to install a second hard drive. On the forums I read that I need a caddy+cable set. I searched a lot to try to find the correct model but I can't seem to find it. How can I find the correct caddy+cable set for my model? 
    This question was solved.
    View Solution.

    Hi,
    An example of the caddy and cable set you need can be seen on the following link.
    http://www.newmodeus.com/index.php?main_page=product_info&products_id=345
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Cable for DV7

    I'm having a ridiculously hard time finding the right cable to fit my Pavilion dv7-4071nr Entertainment Notebook. Is there anyone with experience with the eSata combo/eSata +USB hybrid port /eSatap connection to an external 7-pin hard drive connection? Seems to me this should not have been so much trouble I am beginning to think the port may be damaged but devices that are supposed to work according to chats do not fit. Help needed. Which has best in store support for HP PAVILION.? I can take it to Best Buy, Staples. Office Depot, TigerDirect, & Office Max locally.

    Hi:
    I will try to be polite, but helpful as well.
    Below is the link to the cable I believe you need.
    http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=379
    It's pricey, but if you wanna play, you hafta pay.
    Paul

  • 2nd HDD Pavilion Dv7-4160sd (XE347EA)

    Hi,
    I already found a lot of topics regarding the installation of a 2nd HDD in the DV7-series. But most of them are the DV7-4000 series and I wonder if the DV7-4100 series need the same HDD caddy. The partnumber that I found was 605415-001. Is this also the correct one for my notebook? The HP PartSurfer only lists a couple of parts for my notebook.
    Thanks,
    Paul

    Hi,
    An example of the sort of kit you need to install a second Hard Drive in your dv7 is on the link below.
    http://newmodeus.com/shop/index.php?main_page=product_info&products_id=345
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • 2nd HDD not recognized in Win7 Disk Manager, Shows in Device Manager, BIOS, Win7 Repair CD

    Hello,
    I am trying to add a newly purchased HDD to my laptop as the secondary HDD.  The primary is a 160 GB SSD.
    Primary SSD: Intel 160 GB SSD model SSDSA2BW160G3H
    Secondary HDD: WD 750 GB 7200 RPM SATA/300, Model WDBLHJ7500ANC-NRSN
    Laptop: HP Pavilion dv7t-7000 Quad 17.3" laptop
    Laptop Config: Intel i7-3720QM 2.6 GHz Quad Core, 8 GB RAM, nVidia GT650M, 160 GB SSD
    Laptop BIOS: F.24
    Laptop Date of Birth: 5/24/2012
    OS: Win 7 Prof x64
    Shows up in BIOS (can run diagnostics OK).
    Shows up in Win 7 Prof Device Manager.
    Does NOT show up in Disk Manager.
    Checked device drivers for Win7 Prof Device Manager HDD, have the latest.
    Checked service manual, can't see anything that I missed.
    Booted with Active@BootDisk (Win PE rescue disk), drive showed up as uninitialized.
    Initialized drive, partitioned (one large), formatted NTFS.
    Booted with Win 7 Repair Disk (Win PE), can see the drive in command prompt, able to write a text file to it OK.
    Still won't show up in Win 7 Prof in Disk Manager.
    Any ideas?  Maybe a firmware upgrade for the laptop?  Some kind of incompatibility with the HDD and SDD such as different dirve modes (don't believe that Win7 has issues with IDE versus AHCI devices)? 
    I had trouble adding a 2nd HDD to my dv7-6000 laptop; it finally just showed up months later. Is this common with HP laptops? 
    I am stumped and any help is appreciated.  I checked the Internets and didn't see anything other than HW issues. I need this to work for the new semester that started today.

    More testing:
    WD Data Lifeguard (Western Digital's HDD diagnostics) also won't see the HDD after booting with Win 7 Prof off of the SSD.
    Moved the HDD cable from the 2nd HDD to the primary header (SSD disconnected).  Was able to install another instance of Win7 on the 2nd HDD OK; this proves that the new WD HDD and the secondary cable are OK.  Moved the cable back to the 2nd header (still no SSD) and the computer booted off of the secondary HDD connected to the secondary header OK.
    Added the SSD back to the primary header and booted into the instance of Win7 off of the SSD.  Disk Management can't see the 2nd HDD, WD Data Lifeguard can't see the 2nd HDD; however, Device Manager is able to see the 2nd HDD OK.
    Ran Intel SSD toolbox on SSD; no issues.  Ran WD Align by Acronis on SSD (checks for advanced format alignment of 4K boundaries); it's already aligned to 4k boundaries.
    Connected HDD to pri header, booted Win7 Ultimate on HDD.  Ran WD Data Lifeguard on HDD; it's fine.   Booted into WD Align by Acronis CD, ran WD align against HDD; it's already aligned to 4k boundaries.
    Put HDD on pri header, SSD on secondary header and booted into Win7 Ultimate on HDD.  Able to see both drives in Dask Management.
    Put SSD back onto primary header, HDD back onto 2nd header, booted into Win7 Prof on SSD.  Disk Management can't see the HDD again...
    Updated laptop BIOS from F.24 to F.2D rev A (Install Shield Wizard confirms that it is for Win7 x64 as well as Win 8.1).  Didn't fix the issue...
    Ran Intel Driver Update Utility.  I have the Intel RST (Rapid Store Technology) driver v 11.0.0.1032.  Did not state that I needed to upgrade this driver.  This is latest version on the HP website. 
    Everything works except having the SSD connected to the primary header, having the HDD connected to the secondary header, booting into Win7 Prof on the SSD and trying to see the HDD in Disk Management.  Unfortunately, this is the configuration that I need to work.
    Any thoughts on what is causing this?  Hardware issue with HP Laptop?  Power supply issue?  Bad HDD controller?  Bad install of Win7 Prof on SSD (appears to run fine otherwise). 

  • CASA 15 HDD Cable

    Hi,
    i'm looking for a CASA 15 HDD cable for my laptop.  I'm not sure if the harddrive has failed, or if it's just the cable.  I can't seem to find it on the parts list here. 
    Do you sell it and if so, could you give me the link?
    Laptop is:  Serial:[Personal Information Removed], Model: ASU48UA
    Thanks.

    Hi
    I'm not sure CASA 15 HDD cable you are looking for.. but i found a link where you can order all the parts for your laptop..
    I thought that may help you
    http://partsurfer.hp.com/Search.aspx?SearchText=A5U48UA
    Aslo i found some product manuals that will help you..
    http://h10032.www1.hp.com/ctg/Manual/c03015537.pdf
    Hope this helps.
    ***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
    ****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
    -VJ
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • Add 2nd HDD for DV7-4190SD With right cable length

    Good day people,
    I have a question about adding a second harddrive to my DV7-4190SD notebook.
    I searched a long time now but it seems to be hard to find the 100% correct answer.
    I want to ad a second hdd to my machine, And according to the service manual from my notebook I have to order replacement part 605415-001.
    The description for this part is: 
    Hard Drive Hardware Kit
    (includes left and right bracket rails, connector cable, Mylar coverwith tab, 4 screws, and 4 rubber isolators)
    I just want to know if this is the correct part? The cable wich comes with the 1st HDD is short, the cable that must meet the 2nd HDD must be a lot longer.
    Does this part from HP (605415-001) comes with two cables? (For the 1st and 2nd HDD? because the bracket for the 1st HDD has the same part number....)
    It is also welcome that somebody who had the same problem and has it solved now that he/she pin me in the right direction.
    Thanks in advance for the reply's.

    I dont know about the HP parts but I can refer you to another more reasonably priced place to purchase and investigate your situation. I have added a second drive to my DV7 already and bought my kit here.
    NewmodeUS, Hard Drive Caddys for Notebooks
    Their kits come as complete as HP ones for a fraction of price.
    GL

Maybe you are looking for