2nd ipod won't work

I lost my ipod mini and just got a new one. i do not want to re-install the software b/c i have quite a few songs on my itunes already. How do i get my computer and itunes to recognize my new ipod mini. When i plu it in it just charges and will not transfer or recognize the new device???

Installing the software, under 'normal' circumstances, will NOT cause you to lose your music.
If you had a 1st gen mini, you'll need to install the upgraded software for it to work. And also make sure you've got the most recent iTunes software (4.9).
This may help, as well: Ipod does not appear in iTunes

Similar Messages

I set up a new airport time capsule. Most devices work fine however now my apple tv 2nd gen won't work.

I set up a new airport time capsule. Most devices connected fine however now my apple tv 2nd gen won't work. I turn it on and it searches for time and date but goes no further. I can't by pass it either. Any suggestions?

I can't by pass it either. Any suggestions?
Does that mean you cannot move it to the TC and plug in by ethernet? What does bypass mean?
I would still move it closer to the TC.. and just trial it there. Range on some AC models for 2.4ghz is worse than old one. For some people.
Another thing to try is fixed wireless channels.. one of the very few options still available in the AC model.. lock the 2.4ghz to 11, 6, 1 .. try it in that order.

IPod won't work when iTrip is connect to car charger

When I connect my itrip to the car cigarette lighter the iPod won't work, i.e. it will plsay the current tune but the controls don't respond and it stops playing when the current tune ends. It works ok when I disconnect the power.
Ipod model M9244B version 2.3
Any ideas?

Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem that indicates a hadware problem, likely a bad battery. Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

IPod won't work off the charger

My 4th Gen iPod won't work when it's not connected to the charger. As soon as you remove it from the power source it shuts down. I have updated to the latest iOS and it's been restored. This corrected the issue for about 24hrs then it was back to random shut down and now it won't work at all.
Suggestions or does it need to go visit an Apple Store ?

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

IPOD won't work with SYNC in my new Ford Fusion

IPOD won't work with SYNC in my new Ford Fusion in the UBS port that is made for IPODs etc.
Older model IPOD
Any fixes?

I also had problems with iTunes 7 when it first came out, but 7.0.2 is working for me and seems to have fixed a lot of the problems. It's worth a try if you need iTunes 7 for your new iPod.

HT5569 My computer is not updating to the new itunes 11.1. Is there a link that you can give me to update it specifically? Because my ipod won't work on my laptop unless itunes is updated.

My computer is not updating to the new itunes 11.1. Is there a link that you can give me to update it specifically? Because my ipod won't work on my laptop unless itunes is updated. I unistalled the 11.0 version because when I tried to update it through itunes it wasn't working. HELPPPPPPPP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Try:
http://www.apple.com/itunes/download/
ALso maybe:
Trouble installing iTunes or QuickTime for Windows

Updated my iPod touch 3rd gen to 5.0.1 from 4.3.2 and now the screen my iPod won't work anymore.

Updated my iPod touch 3rd gen to 5.0.1 from 4.3.2 and now the screen my iPod won't work anymore. I restored it, I backed it up and I held the power and Home buttons for the reboot and still nothing. I've been looking to see if any one had the same problem and one guy did but they tOld him it was his hardware, but I don't think it was because my friend was able to get it working but it would stop working again like in 10min. So, has anyone had the same problem and can help? Please, I will greatly apretiate it. :)

What do you mnean that the screen does not work?
When you touch the screen the iPod does not respond?
Nothing shows on the screen?
Or what?

Ipod shuffle 2nd gen won't work, light flashing green and orange

My 2nd gen ipod shuffle won't work and the light is flashing green and orange. Or green, orange, orange, orange. I've Reset, Restarted, Restored and Re-installed, so before I chuck it out I wondered if there were any other suggestions to get it working? Thanks,

Sounds like it's still under warranty (one year). Take it back for replacement.

2nd Monitor won't work

I bought a Pavillion p6210f last week with Win7 loaded to replace my Dell/Vista. I was using two monitors with a VGA port and DVI port on the old PC, so I tried plugging in the same on my new HP and the DVI would not fit. In examining the pins I found that, althought the Manual said DVI, but the plug has the pin/bar arrangement of a DVI-D. So, I bought a VGAto DVI-D adapter and everything plugged in snuggly. All pins and bar appear a match.
But, it won't work. This is what is showing
NVIDIA nForce Serial ATA Controller HP RC Mirror Driver [Display adapter]
NVIDIA GeForce 9100 [Display adapter]
Acer P241W [Monitor] (24.0"vis, s/n LB4040014320, March 2008)the one working monitor....
After hours with the 800 support and hours of reversing the two Acer monitors, the DVI-D port is simply dead. Anything plugged in to the VGA works fine, anything and any combination plugged into the DVI-D and cable switching etc. the 2nd monitor is not even recoginized. The NVIDIA control panel doesn't recognize it. The amber power light just stays that way and nothing ever flashes on the 2nd screen. That is, it is the same as not plugging in at all.
I was less than pleased when 800 tech and supervisor suggested I take it to a repair center. A week old? I have put way too much setup and data transfer into the new HP to go back to the retailer for a replacement.
Techs didn't know, but could there be a DVI-X with the same pins that also fits

Eldric, did you update to the latest video driver from nVidia? It sounds to me like a driver problem. Update and let us know if that solves your problem.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Third Gen ipod won't work or restore

My friend has an old ipod with the click wheel. I think it's third generation. He hasn't been able to turn it on, and when it is connected to the computer it isn't recognized in Itunes. A couple times, a message popped up that said it needed to be restored because it's corrupted, but we can't get the window to stay up to even restore it. We've also tried resetting it, but that won't work. The computers have the newest version of itunes. We've run diagnostics, but the ipod connection always fails. The ipod won't update or play music. An the apple icon appears, and then a folder icon pops up that says to go to support. If anyone has any ideas, please let me know. He doesn't have Apple Care.

I am having the same problem.
So you're saying the problem is with the USB?
If I go to the Apple Store they will have this "USB/Firewire" cable.
Thanks for your help!

Help! iPod won't work or connect to XP

Please choose the appropriate forum for this topic. Thank you. All the music was erased off my 5G 30GB iPod Video last week for some reason (interestingly, the photos were still there). When connected to iTunes, it gave me an error message about needing to "reinstall the iPod software."
Today, I got a new hard drive and installed XP Pro on it. I connected the iPod via USB and the little taskbar bubble popped up saying "Found new hardware -- iPod." Next, I installed the iPod + iTunes software from the CD, restarted the PC and run iTunes. My PC and iTunes didn't indicate that the iPod was connected, so I plugged the USB cable into another slot -- nothing. (I know it isn't the USB because I plugged in a thumb drive and it works fine). I've also tried to update/restore the iPod... but alas, I can't because it's not recognized.
What happened to the iPod is even stranger. After the hard drive was wiped, I was able to turn it on and off and view photos. Now, it only displays the white Apple logo with the black background. The backlight keeps switching on and off randomly, the iPod won't turn off, and the hard drive is making the same noise it does when you change a song, only every few seconds (I assume it's doing this because it keeps turning the backlight on and off constantly).
I've only been able to use the iPod one week out of the two weeks I've had it -- and I'm really disappointed about it. Will I have to send it back to Apple? (hopefully under the 30 or 90 day warranty, whichever I qualify for)
Help is appreciated.
Luke
5G Video 30GB Windows XP Pro

In order to restore it, it has to show up on the desktop, I think. It doesn't. I downloaded the software, and it's waiting for me to plug in the iPod (which is plugged in).
I actually have been reseting it every minute or so since I read your post. Before I restore it, the battery icon doesn't show any lightning bolt or motion. Then if I restore it, it appears to be charging for a short time. I was wondering if I was going to have to charge it in lots of short increments (I don't have the optional charger).
I dug out the manual from under the desk. And it says that if it is extremely low on power, I may need to leave it charging for 30 minutes before it is recognized. I think from a sentence in there: "Leave iPod mini connected until at least the battery icon animates." So, maybe it is actually charging when it appears to be unconnected and has no lightening bolt.
I've turned it off and left it plugged in and am waiting for a charging battery icon to appear. If that doesn't work, I will try leaving it on and plugged in (so far it just turns off when I do that). Again, any suggestions are welcome.

Computer restarted and now iPod won't work, please help!

I've been using my iPod shuffle since September, and there have been no problems, I updated it with the newest software and everything. Then today, I was changing the songs on it, and right in the middle of updating, my computer shut off and restarted. Now my iPod will not work, and iTunes won't restore it (it keeps saying an unknown error occurred (1415)). How can I get my iPod to start working again?

Follow the instructions in this article if you haven't already done so.
(19910)

IPod won't work - Help!

I only just received my iPod Nano 4GB as a gift and it won't work. It works fine while plugged into my PC, and I can import music from iTunes to it, but as soon as I unplug it, the screen goes a bit fuzzy, freezes and slowly fades out - despite the fact that the iPod is fully charged. It won't allow me to reset it (via the toggle button/Menu/select either, and it won't respond when plugged into the mails either, only the computer.
Please help if you can! I've never used my iPod and I'll be really upset if it turns out to be broken - especially as I'm from the UK and all of the complimentary helplines I can find on the Apple website are for US only...

thats the type of thing they invented warrentys for!

IPod won't work?

My iPod touch won't charge or connect to itunes, when i turn it on it shows the apple logo then goes off again. I've charged it for hours and it still won't work, i also tried everything on the Support suggestions for a unresponsive iPod touch. Any suggestions?

first of all, this same thing happened to me after restoring from a jailbreak, and what had happened is i would plug it into my computer when itunes was already opened and did the following: : : : hold lock button for 2seconds while still holding the lock button; start holding down your home button until screen turns off.+almost exactly+ when it turns off, release the lock button and keep holding the home button untilyou see " the plug into itunes/DFU signal. now iTunes will say 'an ipod was detected in recovery mode and needs to be restored before it can be used with itunes" click restore. restore to your backup if you have one. good luck! - the iDevice dev team

5th G iPod won't work when hooked up

My new iPod will charge on my laptop - it shows up on the desktop as well as in iTunes - but it won't work while it's charging from the computer.
I know the battery isn't completely down. Is there some setting I need to change so I can charge AND watch videos at the same time?
Thanks

Click the eject symbol (underlined arrow) next to the iPod in the iTunes source list. The iPod should return to its main menu, but the battery meter should have a lightning bolt in it.
Tom

2nd ipod won't work

Similar Messages

Maybe you are looking for