2nd Loch Ness?- Ominous SEND button during call

Does anyone of you guys know what it is and what it does?
HOW DID IT APPEAR?
During a call today (I was getting called) I put the phone on the desk, making the display turn on again. In the top part of the screen, where you can find the caller ID and a timer for the call, there was a little black button called SEND. It was placed to the right of the call timer. Height of the button was round about the same right as the timer fonts.
Pressing it didn't do anything notable for me. However after having pressed the button it disappeared and I could not bring it back so far.
Searching the web didn't answer my question what this function does and how to evoke this mysterious button again.
Has anyone seen it too? If yes, did you figure out what it is for?
I appreciate your feedback!

There are dedicated VERY big buttons for multicall management in the middle of the screen. I am talking about a TINY little button that I have never ever seen before which appeared in the top part of the phone screen where you can see the party you are talking with and the timer of the ongoing call.
Anyone who can help?

Similar Messages

My face is hitting mute button during calls

I did a search on this topic, but I haven't found my problem.
I read about a proximity sensor so the screen turns off during calls or close to your face. So far I haven't noticed the screen go off at all. Is there something in settings I need to activate?
Where is the sensor on the phone? I have a case but I won't think it's covering anything?
It's VERY annoying, so any advice would help out.

More than likely the case you are using is blocking or partially blocking the iPhone's proximity sensor.
To determine this, remove the case and place or receive a call without using the case. If the same does not occur without using the case, bingo.
The proximity sensor and light sensor are located to the left of the earpiece with the iPhone 3G. They are in a different location with the first generation iPhone.
The photo of this case indicates where they are located with the iPhone 3G.
http://www.marware.com/PRODUCTS/iPhone-3g-cases/Sport-Grip-for-iPhone-3G

Pressing Green button during call sounds alarm

Has anyone else noticed this? If you are on a phone call and accidentally press the green button, the Blackberry sounds an annoying high pitched alarm for about three seconds. Fortunately, the person on the other end does not appear to be able to hear it, but the conversation is interrupted during that time period.
Does anyone know how to turn off this incredibly annoying feature?
Thanks.

I didn't face such issue with my phone with Bold and 8310!!! I will chcek with other devices and will let you know if those have the same issue like yours.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

# during calls on BB10 latest version

Since the latest BB10 update, the # symbol has become a "send" button during calls which appears to operate the same way as the green phone button so if pressed during a call it initiates a new call.
Problem is I have to use the # button on my company's teleconferencing service (webex) to dial into calls. It is intensely annoying that every time I dial into a call the blackberry initiates a new one which needs to be dropped before I get into my call. This happens twice for every call. Once for the call number and once for the attendee number. Anyway I can switch this "feature" off?

darrens666 wrote:
Since the latest BB10 update, the # symbol has become a "send" button during calls which appears to operate the same way as the green phone button so if pressed during a call it initiates a new call.
Problem is I have to use the # button on my company's teleconferencing service (webex) to dial into calls. It is intensely annoying that every time I dial into a call the blackberry initiates a new one which needs to be dropped before I get into my call. This happens twice for every call. Once for the call number and once for the attendee number. Anyway I can switch this "feature" off?
Im not sure if this is a "feature", can you try running the BlackBerry Virtual Expert and run a keypad test?
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

IPhone 4 stays lit during calls

My iPhone 4 stays lit during calls. It causes me to hit the mute, FaceTime and contact buttons during calls. I took my otter box off and it still does this. Can anyone help me?

This is Proximity Sensor problem. This sensor is located on the Power Button Flex Cable. If the iPhone front screen has been replaced this is known problem. Restore iPhone with current iTunes on computer.

During audio messaging the send button does not switch to a microphone after selecting a contact

During audio messaging the send button does not switch to a microphone after selecting a contact

Actually, this problem is the same as the one described in your other thread, and should be fixed as well after following the procedure described there.

My Lumia Icon goes dark during calls and I cannot access the phone pad to unless I hit the power button.

My Lumia Icon goes dark during calls and I cannot access the phone pad to unless I hit the power button. Because of this it makes it tough to put my phone on speaker or type in my v-mail password.

I've been trying to find a common denominator. It happens inconsistently. It never happened before the Denim update. When it does occur, the screen goes black immediately upon answering the call and doesn't come back until the call is ended by the calling party.
I thought it might be the proximity sensor, but when it's working normally I can see the screen go dark when it's at my ear and comes back when I take it away (tried it multiple times). I had Gestures Beta installed. I wondered if that could have an affect so I uninstalled it, but that didn't make any difference. I'm still stumped by the inconsistency. I haven't reset my phone as I didn't really want to go through that...

Phone/send button no longer brings up call log

phone/send button no longer brings up call log. I press the phone button to get to the phone, then hit button again to view call log and screen merely blinks...repeatedly.
Post relates to: Treo 650 (Cingular)

We have two Treo 650's in the family.
Spouse's Treo is having the same problem, button works OK to get into Phone app but second press does not bring up the Recent Calls list.
Spouse has never installed Datebk5 although I have it. He has problem, I do not. Still I decided to try this fix and similar fix by TakePhone developers...problem NOT resolved.
I did try a SYSTEM RESET (not a hard or soft reset) and that worked...but in order to get wireless working again a soft reset is required. After doing the required soft reset the problem returned.
I am not the only one in this boat:
http://discussion.treocentral.com/showthread.php?t=69082
Any ideas?

How to press "Call" or "Send" button while you're talking??

Normally, cell phones have a "Call" or "Send" button outside the screen. So you when you're talking to someone, you'll be able press "Call" button. For example, I called a company and they needed me to press the number xxxxxxxxxxx and press "Send" or "Call" to send the data I just typed from my phone.
But I don't know how to do this with iPhone? Any idea how to do it?
Thank you in advance.

When on a call, tap the keypad button. The DTMF tones are generated in real-time (as you tap the numbers) so there's no need to 'send' them after entering them. This is how I enter teleconference PINs, etc., routinely. You may need to slow down your entry a bit.

Calls using send button

When I try to make a call on my 8130 using the send button, calling someone back, when I hit send to make the call I get the ABC icon in place of my battery indicator. I have a heck of a time getting rid of it to get my battery indicator back. It is VERY annoying.
Is anyone else having this problem?
Please help! I know I can perform a hard reset by removing the battery, but I can't do that every time I place a call.

I don't like that bug on my blackberry as well. Here's what I do to get rid of it. I go to the addresbook then instead of hitting the End key, I hit the Esc key.
Message Edited by ecbb on 07-10-2008 10:13 PM

How to refresh table column during button method call ?

Hi,
I have one table on my screen in which there are 5 rows.
One of the column of this table is Status with initial value Not Completed.
Now when I press submit button my 5 processes are started in for loop one by one.
After completion of 1st process, I am updating 1st row status with Completed and vise a versa.
But change is reflected on table after by method call over means if my submit action take 5 minutes to finish all 5 process than after 5 minutes, I can see all rows with status Completed while I want it to reflect as soon as I set its status.
How can I do this ?
regards,
devang

.. or break up the method in 5 methods (for each process a separate method) and with you button you call the first method. then when at the end of the method you call a javascript which updates the first column to completed and the js calls the second method (with queue of client event and serverListener) ... and so on and so on.
Really not so cool idea but I think it's achievable:)

Screen blanking during call - Galaxy S4

Greetings
I have BT Smart Talk installed on a Galaxy S4. Installation went OK and application appears to lauch perfectly. When attempting to make a call, I can dial the number but immediately I press the green "phone up" button at the bottom of the dialler page, the screen goes grey (not black - unlike with a normal call) and there is nothing displayed at all - a completely blank grey screen. I can continue with the call, but I cannot end the call and none of the buttons on the phone seem to work while this app is controlling the phone. If I drag the screen from the top, I momentarily get the "end call" screen, but it is desensitised and the red "phone down" button does not work. The only way I can end the call is to power off the phone. I have tried deselecting "Turn Off Screen During Calls" in call settings but this makes no difference to the BT App - only to the phone's own dialler. Any thoughts?
Richard

Hi rjmeado,
This sounds like it will need to be looked at by the Smart talk team. Please use the 'contact the mods' link in my forum profile under the 'about me' section to send in your details and we'll get this investigated further. You can find the link by clicking on my username.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

IPhone 4 Mic & Speaker not Working during Call

Hello All,
I have iphone 4 and it was locked on at&t and was running ios 5.0.1, now i have unlocked my iphone and now i am using ios 5.1.1. But i have a problem, when i call someone i cant hear anything "no dial tone sound and no sound during call" & speaker mode is also not working and nor the person cant hear my voice. I also tested on my another phone but same problem.....
So can you tell me is this a hardware problem or software problem ?? and yeah i can record voice memos and i can listen my memos with speaker on and off
Waiting for reply....

Do the basic troubleshooting steps described in the User Guide:
1. Reset iPhone (no data loss): Press both home and power buttons for at least 10 seconds, releasing when the Apple logo appears.
2. Restore in iTunes using a backup
3. Restore in iTunes as new, without using a backup.
If restoring as new doesn't help, there is a hardware failure.

IPhone 5c IOS7.0.3, other people can no longer hear me during calls unless I tap into speaker mode and back?

Hi,
I'm currently using an iPhone 4S, but my partner has just bought an iPhone 5c. A while ago, before the IOS7 upgrade, my phone would for some reason act as if I had clicked mute during calls. Nobody would hear me, but I could hear them perfectly. The only fixes were to hang up and recall them back, or to switch it to speaker mode and back again. Very annoying. However, after updating my IOS, it suddenly stopped doing this. It was fixed, I was happy, game on.
But recently, my partners phone which was working perfectly fine before the new IOS7.0.3 update, has developed this problem. Exact same issue, exact same solution. I wouldn't mind so much, but shes bought this phone in the last month, its a brand new phone, new software, new model... It shouldn't still be doing this! Whats worse is that when driving, its very dangerous for her to have to keep switching between speaker and not just to get her phone working. (She drivers with the phone in a cradle with hands free on).
This issue is... Annoying. I've found that its not exactly a rare thing, and that a lot of people have had it for quite a while, but the only solution I've seen is to open the back of your phone and cover a certain part with paper/cardboard... Not exactly what we want to do is it.
Does anybody have any advice or a solution to this, as I'm going a little crazy trying to reset everything and fix it!
Thanks in advance!

Same issues here. Sometimes during outgoing calls, people cannot hear me at all, even when the signal strength is good. Only solution is to soft reset the phone. A couple of times the person could hear me for the first few seconds of the call then it dropped completely.
I also experience the issue with the 3G data as you described (I think they are related... i.e., when the 3G data isn't working, the issues with outgoing calls exists too). The phone will just randomly seem to lose it's internet connection, even with full signal strength. Soft reset/toggling airplane mode fixes this.
I called Apple support; they asked if I was covering the microphone during outgoing calls (as if I'm that stupid). Come on Apple, I have a University degree in Computer Engineering, don't insult my intelligence! They then asked me to restore the phone (which I already did). Next solution they offered me was to replace the phone by sending me a new one first (at a cost of $35), or I could send it back and be phoneless for a week while they send a new one (which is not an option for me). I also put on a $30 Invisibile Sheild so if I exchange it, I already lose that. I believe the issue is not with the hardware, since the microphone seems to work just fine. Given that it is intermittent like this, it seems there's a software/firmware error somewhere that gets the phone into a bad state.
Very disappointed that the $800 phone I just bought functions worse for phone calls than the Nokia brick I had 8 years ago.
If anyone has a permanent solution for this that doesn't involve exchanging the phone, please let me know.

How to add a Facebook send button to blog post

I am not able to get the Facebook Send button to pull the blog post's unique url to share. It pulls the main blog url.
I added the Facebook plugin code to a content holder I created because I cannot find the container.html, so I decided to make my own Facebook module.
Then I pulled the module into my blog post list module. I want the share buttons to appear after each blog post.
What am I missing? What is the tag to pull the specific URL for the post to share it? Do I change the URL in the Facebook code: <div class="fb-share-button" data-href="https://developers.facebook.com/docs/plugins/" data-layout="icon_link"></div> ?
I think this link pulls the button itself from Facebook?
When I call up my module in the blog list it looks like this:
<div id="SocialMediaShare">
{module_contentholder,3272408, url="{tag_blogposturl}"} 
</div>

thanks!

I don't have an answer for you, but I do have a question. You said the FB code works. What did you do? What did you put in your html page? I tried the FB code above and it gives me an ID error. Appreciate it if you can elaborate more. I just posted the ff in the forum "Customizing FB Share in Edge Animate"
Thank you!

2nd Loch Ness?- Ominous SEND button during call

Similar Messages

Maybe you are looking for