2nd Monitor died - How does one grab tools back from "that" desktop?

Hi -
One of our two monitors died. There are tools on the 2nd monitor's desktop that we can't "see" until the 2nd monitor returns. How do we pull those tools over to the main desktop?
Also, there are a few finder windows that are too large to grab the bottom scaler and shrink them back. (There is no tool bar on the top of the second monitor giving just a little bit more room.) Is there a minimize button somewhere for "finder" windows?
Thanks!

Ps - just found the "zoom" button on my own - so - I have the finder windows under control - now to learn how to get to that other desktop without the view into the other desktop!

Similar Messages

  • How does one remove temporary files from Safari?  A friend logged on to her Facebook account using my iMac.  Now I can't remove her e-mail address from Facebook.  It was suggested to me that I try clearing temporary files from Safari but I can't find

    How does one remove temporary files from Safari?  A friend logged on to her Facebook account using my iMac running Mac OSX 10.7.5 and Safari 6.1.6.  Now I can't remove her e-mail address from my computer.  When I open Facebook her address shows in the user button.  I do not have a Facebook account.  It was suggested to me that I try clearing temporary files from Safari but I can't find anything that tells me how to do this.  Are temporary files the same as the cache?  It also was suggested that I try clearing Safari cache.  How do I do that?

    Check Safari/Preferences/Passwords to see if the Facebook account is there. If so, select it and remove it. If you are still having problems, Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. If that doesn't work, Safari/Reset Safari.

  • How does one email a video from iPhoto

    how does one email a video from iPhoto

    One doesn't.
    Simply, sharing video via email is not advisable.
    Many email services have an attachment limit of 20mb and some a limit of 10mb. As emails are sent through an array of relays, the effective limit is the smallest file size allowed on any of the relays.  That means that video is rarely suitable for emailing.
    Then there's the whole issue of Codecs and not all machines will have the codecs to play all videos. Plus, folks with slower connections can find it very inconvenient to download large video files.
    Finally, sharing video from iPhoto via email is not supported. All that gets you is the Movie thumbnail. If you feel you must share via email then you'll need to export the video first, and attach that. Use the File -> Export command and set the kind  to Original.
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.
    Other than that your options include:
    Upload it to a sharing site like YouTube or Vimeo and email a link - these will allow the recipient to view the material online. That will avoid the codec issues mentioned, and the person can still download the video file if they wish.
    Upload it to sharing services like Dropbox or YouSendIt and email a link. This will require that they download the material to their machines to view.
    Regards
    TD

  • How does one cancel a purchase from apps store

    how does one cancel a purchase from the apps store?

    Purchases are considered final, but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How does one get tech support from adobe?  is there an online "chat" service?

    How does one get tech support from adobe?  is there an online "chat" service?  There formerly was a telephone help service.  There is no phone number shown in "help.adobe.com"  Has phone support been eliminated as a cost-saving measure?

    There is finite help available via chat & phone
    http://www.adobe.com/support/download-install/supportinfo/
    Many problems can be solved here in the user-to-user forum. Feel free to avail yourself of this opportunity.

  • How does one upload a file from flex to a cfc

    How does one upload a file from flex to a cfc?   Can you do the file upload via remote object? I usually do uploads cia cfm but prefer the asnc capabilities of remote object calls.

    Hi,
    The issue here is myFile. For flex we need to pass this name as paramenter becuase it's not html form item like:
    <cfcomponent>
        <cffunction name="uploadFile" access="remote" output="false" returntype="void">
        <cfargument name="file" required="Yes" type="any">
            <cffile action="upload" filefield="#arguments.file#" destination="C:\temp\" nameconflict="makeunique">
        </cffunction>
    </cfcomponent>
    From flex I'm getting the file using fileReference like:
    private function browseAndUpload():void
                    fileReference = new FileReference();
                    fileReference.addEventListener(Event.SELECT,fileReference_Select);
                    fileReference.addEventListener(Event.CANCEL,fileReference_Cancel);
                    fileReference.browse();
                private function fileReference_Select(event:Event):void
                    fileReference.addEventListener(ProgressEvent.PROGRESS,fileReference_Progress);
                    fileReference.addEventListener(Event.COMPLETE,fileReference_Complete);
                    fileReference.addEventListener(IOErrorEvent.IO_ERROR,onLoadError);
                    //fileReference.upload(request);
                    fileName = fileReference.name;
                    myFile.htmlText = fileReference.name;
                    SM_RO.importNSA();
    filerReference have an upload method to upload the file but I can't use that becuase I need to process my upload with my cfc.
    I'm getting an error:
    Failed to import the file. The cffile action="upload" requires forms to use enctype="multipart/form-data". Please also make sure the file is not open.
    I can't find the way to setup the enctype becuase again i can have html form items in flex, or I can?
    Thanks
    Johnny

  • How does one go about authenticating so that getRemoteUser() does not retur

    Any Help Please
    How does one go about authenticating so that getRemoteUser() does not return null?
    am using oracle application server 10g R3 and i already modify wy web.xml but its not working also
    thanks
    thanks

    Hello,
    Easiest would be to get an External Hard Drive & clone eerything asap, you can even boot/run from the external, & Firewire would be far faster than USB.
    Even if you replace the Internal, you'll need an externsal to clone to first.
    http://eshop.macsales.com/search/firewire+drives
    Many of those come with Backup SW, or...
    Get carbon copy cloner to make an exact copy of your old HD to the New one...
    http://www.bombich.com/software/ccc.html
    Or SuperDuper...
    http://www.shirt-pocket.com/SuperDuper/
    Here's the steps to replace the Internal Drive...
    http://www.ifixit.com/Guide/Installing-iMac-Intel-24-Inch-EMC-2111-Hard-Drive-Re placement/5211/1

  • How does one update Subtemple value from Yes to No?

    Greetings! In the instructions of a published problem statement (Note ID: 808571.11) there is a line that says:
    "c) Check if the subtemplate is set to NO. Update it to NO if it is set to Yes."
    How does one update the Subtemplate value from Yes to No? In edit configuration, I do not see a Subtemplate value column.
    Many thanks in advance fr your suggestions.
    Tom

    With all due respect ... I do not see how one can change the Subtemplate value from Yes to No. When I query the offending Template, the Subtemplate column is not displayed in bold, indicating to me that it can not be updated. Clicking on Edit Configuration, doe not provide an ability to change the value either.
    As best I can determine, one needs to 1) query up the template
    2) download the rtf file(s)
    3) end date the template
    4) create a new template and then set the Subtemplate value to No.
    And the same steps appear to be required in order to add or update a template Description.
    Which raises the question, Why can this not be done by editing the configuration?

  • How does one down load pictures from a PC hard drive to an itouch 4th gen.

    How does one download pictures from a PC hard drive to a 4th generation itouch ?

    By following the instructions here:
    iPhone, iPad and iPod touch: Syncing photos via iTunes

  • How does one copy an xygraph from a refnum?

    Sorry, normally this is straight forward enough to push through on my own.
    Purpose:
    Pass Refnum of XY graph to subvi -->
    Subvi's purpose : PRINT XYGRAPH to file/pdf/bmp, manipulate xy graph further (change back ground color to optomize for printing, optomize xy graph size for printing, move legend), perform some simple analysis on the data (rms, pkp etc)
    Problem Statements: 
    1 When using a refnum, writing any changes to the refnums property value will also change the parent i.e. the subvi xygraph.  This is not desired, so an exact copy of the xygraph must be made.  HOW DO YOU DO THIS?
    2 When using a refnum for an xygraph, how does one retrieve the xy values?  If the property node for value is selected, a variant is produced.  (which after careful examination I was still not able to make heads or tales of this particular variant) 
    p.s. A refnum is used because the xygraph already has formatting applied to its legend, plots, axis, etc.  A refnum passed to a subvi is the only way I know to pass all formating etc for the graph.
    p.p.s. I understand that there is an invoke node that will export an image, it contains certain limitations (such as requiring the subvi be opened, since it works by similar rules to a printscrn) that make it un applicable to this problem.
    -Regards
    eximo
    UofL Bioengineering M.S.
    Neuronetrix
    "I had rather be right than be president" -Henry Clay
    Solved!
    Go to Solution.

    eximo wrote:
    Problem Statements: 
    1 When using a refnum, writing any changes to the refnums property value will also change the parent i.e. the subvi xygraph.
    I don't understand this statement. Does the subVI have a graph also? Obviously, if you make changes to properties via the refnum, then the graph it's pointing to will change.
    p.p.s. I understand that there is an invoke node that will export an image, it contains certain limitations (such as requiring the subvi be opened, since it works by similar rules to a printscrn) that make it un applicable to this problem.
    Again, I don't understand. Where's the graph? On the main VI, or the subVI? If it's on the main VI, why would this be an issue? Wouldn't the main VI window be open?

  • How does one execute unix commands from within an applet?

    Greetings Folks,
    I've written a simple java applet that runs a unix command and then displays some information. The applet compiles fine, and runs perfectly from the command line on my unix system.
    However, when I point a browser at the applet from my desktop PC I get the following error as taken from the java console:
    Exception in thread "AWT-EventQueue-2" java.security.AccessControlException: access denied (java.io.FilePermission <<ALL FILES>> execute)
    This is of course the first line in a long line of error messages. It appears that I am not able to execute a command on the unix system through my applet. I know the problem is with trying to execute a unix command since commenting it causes no error in the web browser. This is the command I'm using in java to execute the unix command:
    p = Runtime.getRuntime().exec("ps");
    Here's the html file on the unix system:
    <html>
    <head></head>
    <body>
    <appletcode=G.class height="250" width="400">
    Your browser does not support the applet tag.
    </applet>
    </body>
    </html>
    I won't list the java code since it is compiling and working on the command line. But, if you want to see it I'll provide it.
    I've done quite a bit of research on this and it seems that a great number of people have similar problems reading or executing files through java. I have yet to find a solution to this problem.
    Here are some details about my setup:
    Server:
    HP9000 running HP/UX 11.23
    Apache Web Server 2.0.35
    Java 1.5
    Desktop PC:
    Win2K Pro
    Internet Explorer 6
    Java 1.6
    If you have a solution I would be very grateful! This problem is keeping me from writing my application!
    thanks!
    kev

    Multi-posted.
    Already answered here http://forum.java.sun.com/thread.jspa?threadID=5225314&messageID=9916327#9916327
    Please don't multipost again!

  • How does one delete specific photos from ipod touch 2nd gen (with ios 4.2.1)?

    I would like to delete some photos from my ipod touch 2g, ios 4.2.1, but I can't just sync it to my (new) computer because then all of them would get deleted because I don't have the photos that I have on my ipod on my new computer. Help!?
    Thanks

    - You can email the ones you want to retain and the restore the the iPod on the the new computer
    - You can use a third-party like PhoneView or TouchCopy (both paid) and maybe the free
    iFunBox for Mac | File Manager, Browser, Explorer, Transferer for iPhone, iPad and iPod Touch
    tio copy them to the computer.

  • Using a PCI-6534 card, how does one write and read from the board simultaneously after being triggered on the StartTrig input ?

    I've copied two NI-developed VI's into a single VI. The first VI is the LV 'Buffered Pattern Input-Trig VI' under examples/daq/digital/653x. Using an external data generator, I send it a pulse on StartTrig, a clock on REQ1 and data on DIOA0. The start pulse is negative going so I set the front panel input to trigger on "falling edge" with clock set to 'external'. This VI is configured as Port 0 and Group 0. Once this VI is triggered I need to then start another VI which is simply the Buffered Pattern Output VI that also ships with LV. This VI is configured on Port 2, Group 1. This VI is used to simply send out a previously d
    efined array of data on DIO C0, C1 and C2.
    So, I receive a Start Trig, then clock in data, and then immediatly want to send out data. My problem is that I can't figure out when my receiving VI gets triggered on the StartTrig input. If I know when the trigger occurs, then I can wire this condition to a case statement and activate the second, or write VI. Without having the Trigger condition be met to enable the output VI, the problem is that it always outputs without even be triggered. So, where or how do I tap to find out when the StartTrig happens ? In other words, how do I know when the receiving VI has received a StartTrig pulse. There's got to be a way to do this, and I need to run in continious mode, so I can keep receiving and sending out data over and over again. Any ideas ? If your answer is to look at the examples, please tell me exact and specific examples, because I have not been able to find any examples directly related to my goal. thanks.
    Kirk

    Nestor-
    I tried your first suggestion of connecting ACK1 to ACK2. But, I get Error 10010 at Digital Buffer Control when I run the VI. I've added an array of 32 ones and zeros to the output VI so that I have some data to write. What's really interesting is when I have a scope probe on ACK1 and ACK2 which are now common, the voltage level is less than 5 volts, around 4.7, but there is something wrong with the signal, a few spikes, I've seen this before, like 2 signals are trying to drive the same output or something. When I remove the connection between ACK1 and ACK2 the signal looks perfect since ACK1 is being driven by my data generator. This leads me to believe that you can't connect ACK1 to ACK2, or atleast you can't do it with the way I have the VI'
    s configured. Also, I have a scope probe monitoring DIOC0 (since I'm writing to Port 2,which is Port C) and I don't see any data coming out, which makes sense since I get the error mentioned above.
    In terms of my configuration, I have 2 VI's on the block diagram. I have Buffered Pattern Input-Trig.VI with the following settings:
    Group: 0
    Device: 1
    Port List: 0
    Buffer Size: 1000
    Clk Soruce: External
    Trigger Type: Start Trigger
    Trigger Condition: Trigger off Falling Edge
    # of pretrigger points: 0
    For the 'writing VI' I copied the Buffered Pattern output-Trig.VI with the following setup:
    Device: 1
    Group: 1
    Port List: 2
    #of updates: 1000
    Clock Source: Internal
    Trigger Condition: Trigger on falling edge
    So, do you have any ideas on what might be wrong ? Just realized that I can attach files, so my VI is attached.
    thanks.
    Kirk
    Attachments:
    input_output_at_the_same_time.vi ‏164 KB

  • How does one Create Bootable DVD from downloaded iso image in Windows?

    I have a completely empty system I want to load Solaris Express on. I have access to web on a Windows XP machine and have downloaded the Solaris iso image. Using WindowsXP facilities simply copies the iso image as an intact iso image file and resulting disc is not bootable. Windows knowledge base very conveniently says that what happened to me is what happens. No obvious referral to how to do it....
    A) So for a non-Windows savy person who does not want to become Windows savy (That is why I downloaded Solaris!) Where is a set of instructions on how to (inside Windows XP) "extract" an iso image to a CD / DVD disk so it will be bootable?
    B) It sure would be nice if Solaris were able to be loaded onto a USB Flash drive and booted at will from any USB computer. Just plug it in and boot. Has this been done?
    C) Getting a physical disk by snail mail from Sun is very slow for me.... (3 weeks and still watching the mail box...)

    A) So for a non-Windows savy person who does not want to become Windows savy (That is why I downloaded Solaris!) Where is a set > of instructions on how to (inside Windows XP) "extract" an iso image to a CD / DVD disk so it will be bootable?http://www.sun.com/software/solaris/download_instruction.xml
    You probably copied the .iso file as one single very large file onto media. Instead, you can use a utility such as Roxio DVD Creator or Nero (or freeware like cdrecord) , and select the option to burn an image that already exists. No special boot options are needed, because the ISO image already contains the boot information needed.
    B) It sure would be nice if Solaris were able to be loaded onto a USB Flash drive and booted at will from any USB computer. Just plug > it in and boot. Has this been done?With the Newboot project introduced into Solaris Express, I believe it is now possible. I'm not a USB expert, though, so cannot say for sure.
    C) Getting a physical disk by snail mail from Sun is very slow for me.... (3 weeks and still watching the mail box...)I can't comment on that.
    -- Alan

  • How does one delete the search history that comes up when I type in the search box?

    When I type in the search box it reveals my past search , how do I delete or stop same.
    I have deleted my browser history but this still shows.

    You can right-click the text area in the search bar to "Clear Search History"
    You can also disable: Tools > Options > Privacy > History: [ ] "Remember search and form history"
    See also:
    * [[Clear Recent History]]
    * http://kb.mozillazine.org/Search_Bar

Maybe you are looking for