2nd monitor Logic Pro X

Hi everybody,
Maybe a silly question, bur is it possible to run Logic Pro X over 2 monitors? (lets say the mixer on 1 side, the main window on the other side).
I am trying to find some info on the web but I, m not succeeding..:-)
Please reply, thanks in advance.
Kind regards,
Mark

Yes.....
http://www.logicprohelp.com/forum/viewtopic.php?t=52311
https://www.logicprohelp.com/forum/viewtopic.php?t=110403&p=572128

Similar Messages

  • MacBook Pro performance issues w/2nd monitor and FCP7

    I have this MacBook Pro bought brand-new in January 2010:
      Model Name: MacBook Pro
      Model Identifier: MacBookPro5,2
      Processor Name: Intel Core 2 Duo
      Processor Speed: 3.06 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 6 MB
      Memory: 8 GB
      Bus Speed: 1.07 GHz
    and until today had never attached a second monitor to it. Today I hooked up my Samsung 24" to do some dual screen editing in Final Cut 7.0.3. I was unable to play back my video at full speed in the second monitor, and after a few seconds of skippy playback I'd get that error message about unable to play back video at full speed and to check my RT settings. I was using a Mini DisplayPort to DVI adapter. My computer has no issues playing the video in the laptop's monitor at any resolution and any quality settings (I've never changed the RT settings or anything else in the menu ever but I tried every combination this time). I then tried using my TV as a 2nd monitor with an HDMI adapter. Same performance issues. I then tried my friend's newer 13" MBP 8,1 and it performed flawlessly with the same project & footage. I feel like my $3,000 computer should outperform a $1,200 one even if mine is a year and a half older. Any advice?
    Chris

    Wow, you posted this perfectly to coincide with an identical problem, albeit using Logic Pro 9.1.5 rather than FCP.
    Last week, I purchased a 23" external monitor to use alongside my "flagship" 2011 15" hi-res, 2.3 i7 Macbook Pro with 8Gb of RAM.
    It is connected via a mini-DVI to D-sub analog (not that that should matter?) and all appeared fine.
    The first issue I had was with my MBP's fan now running CONSTANTLY, when I have the second monitor attached. Even when the machine is completely idle.
    When using the machine to record audio, this is a fairly hefty problem and not something I had anticipated - indeed why would I anticipate such a thing?
    What is far, far worse though is that over the last few days I have had repeated problems with performance drop-outs and errors in Logic and I have trying to fathom out why. Realising that the only major system change made, was the above monitor connection, I ran some tests.
    I restarted my MBP, no other apps were running and with my new 23" monitor attached acting as main display with MBP built in display on as secondary
    I loaded up a fairly demanding Logic project which was hitting 40% to 60% CPU usage when using the built in MBP display last week
    I ran activity monitor and had CPU usage history open
    The above project now repeatedly overloads and playback halts in a given 8 bar section - with CPU at 80% most of the time
    I disconnected the external display, no shut down, I just let the machine switch to the built in 15".
    Started the same project, the same 8 bar section and hey presto - CPU usage back down to 40% to 60%
    The above was reflected in the CPU usage history with the graph showing CPU use down by about a half, when running this Logic project WITHOUT the external display.
    There is a very useful benchmark Logic project that has been used as a test by many users to gauge Logic performance on given Apple hardware.
    The project has about 100 tracks pre-configured with CPU intensive plugins, designed to tax the CPU.
    The idea is that you load up the project with tracks muted, press play and then unmute the tracks steadily until Logic us unable to play contiunously because of a system performance error.
    On my MBP, with the external monitor NOT attached, I can play back around 50 of the audio tracks in this benchmark project.
    With the monitor attached, I can get about 22 tracks playing.... which is actually a far worse a performance drop (-50% I think!?) than with the first example!
    I did also try with just the external monitor attached and not the MBP display and performance was about 10% better than with dual monitors - so still extremely poor, to say the least.
    This machine is the flagship MBP and has a dedicated AMD Radeon HD6750 GPU which should take care of most if not ALL graphics processing - I mean it's capable of running some pretty demanding games!
    Putting aside the issue of constant fan noise, there is no reason AT ALL, why using an external monitor should tax the i7 CPU this way - it's not as though Logic is graphically demanding... far from it.
    I am on 10.6.8, Logic 9.1.5, all apps up to date via "Software Update".
    I will of course, be contacting Apple...

  • Mac Pro 3.1 (early 2008) lags since I connected a 2nd monitor - HELP!!

    Hey guys,
    I just bought a 2nd monitor and i have lags every 5 seconds which
    last about half a second (feels like 10 or less fps during the lag).
    It happens with all kinds of applications. It gets worse with multiple
    applications openend at a time. The crazy thing is that it only occurs
    when i start to use both monitors at the same time. When i e.g. use
    Logic 9.1 and use one monitor everything runs nice and smoothely
    but as soon as i move the window slowly to the 2nd monitor i can
    see the window lagging while I'm moving it. This is really annoying
    because it seems not every input from the mouse/keyboard gets
    into the system and its not a smooth workflow at all.
    I switched the monitors connections but it didn't help.
    Mac Pro (Early 2008) 2.8Ghz 8-core
    Snow Leopoard ( 10.6.2 )
    6GB RAM (2x2gb kingston, and the usual 2x1gb)
    ATI 2600XT and 3 HDD.
    1 Monitor 24" LG W2452T running at 1920 x 1200
    1 Monitor 22" Samsung Syncmaster 2243BW running at 1680 x 1050
    I really hope that you guys can help me out with this one.
    What could be the problem? The ATI 2600XT should definately
    be able to handle two screens at once with such little graphics
    in logic 9 ?!
    I want to run Logic 9 and an analyzer software (Spectre from AudiofileEngineering)
    at the same time but its not possible with the LAG.
    The problem/lags also occur when i sync the monitors.
    Would a 2nd graphics card be a solution? But as I said
    before its not a graphics demanding application.
    Is it a hardware or software problem?
    Summary:
    - The whole System lags (not just one monitor) when
    I start to use both monitors (having application windows on both).
    I've got minor lags when using only one display and leave the
    2nd one with the desktop wallpaper clean.
    I tried:
    -using only the 2x1 GB RAM which came with the mac pro
    -using only the 2x2 GB Kingston RAM
    Thank you in advance for your help guys!
    Rick

    Hey all,
    I wasn't able to fix this yet.
    I did everything I can think of. I even tried to wire
    one monitor with a VGA cable but it didn't help.
    I even have small lags when I am moving the Safari window
    between the 2 monitors. Really little lags then but they
    definitely are noticeable. I can make a video of that
    if that would help someone understanding.
    Hope there is someone out there who can help me with this.
    Thanks already for any advice!
    Cheers,
    Rick
    Edit: Do you think a new graphics card like the ATI 4870 would
    help it? But I really don't want to spend more money just to
    have 2 monitors while i have already 2 dvi connections on the
    ati 2600XT.
    Message was edited by: RickUnique

  • Logic always opens on 2nd monitor!

    Hi,
    I am using Logic Studio 9.0.1 under SnowLeopard. I have the annoying problem that my Logic always opens on my 2nd monitor, even when I create a new project.
    How can I change this?
    Thanks in advance.
    BiTRiP

    Check to make sure that your 2nd monitor is not setup as the primary monitor. I have 2 monitors as well and primary is on my left and 2nd on right. Take a look in the system pref to see if thats the case. have you tried swaping the cables on the video card?

  • Final Cut Pro 2nd monitor not working properly?

    Been here before a long time ago, can't remember how it was resolved.
    Working in a new edit suite, FCP Studio.  Two new Samsung monitors (not my choice).  I want one to be my playback monitor.
    I set:
    Final Cut Pro > Audio/Video Settings
    > Digital Cinema Desktop Full Screen
    > View > External Video > All Frames
    But all I'm getting is a black frame on the 2nd monitor.
    They've also got one of those very flat alluminum keyboards ... where F12 becomes a sound control.  I'd love to know how I can change the function key to work as an FCP action / 2nd monitor toggling on and off.
    That's two questions.  Would be most appreciative of an answer for either.
    Ben

    Hey Andy,
    I did the first half of your suggestion, but not the second half.  Heading down to the studio this morning ... set up in a tiny white chapel looking out across the silvery North Atlantic ... and will try the second half of your suggestion.  Will also see if there are two graphics cards installed in the Mac Pro.  Will also check out the Window > Arrange in FCP (something I should have checked first off).
    I talked to a filmmaker who previously worked on the system, only to discover he never uses the second monitor as a full screen, but rather as a large 'bin'.  Interesting.
    If worse comes to worse and I can't solve it I suspect I could size the canvas window to super large and drag it over to the second monitor.
    Will post back when I've tried the latest suggestions ...
    Thanks you mucho guys,
    Ben

  • Just got new macbook pro, how do you hook up 2nd monitor?

    Just got new MacBook Pro, How do you adapt to 2nd monitor?

    You will need a Mini DisplayPort (Thunderbolt) cable and an adaptor for the type of connection your monitor requires. You will find the adaptors at Apple's online website.

  • Clitching H264 Playback on 2nd monitor - 17" MacBook Pro/NVIDIA

    I have used Keynote professionally for many years, and often use H264 compressed videos (that I have created in After Effects). This has always worked very well until the last few weeks when I noticed that every now and then there is a glitch in the playback of H264 movies when a 2nd monitor/video projector is attached.
    Glitch description: A completely random flash/breakup of the image that lasts for single frame - similar to the old flash frame you used to get when playing back MPEG2 movies in PowerPoint. This does not cause the video to stop playing, but is annoying when using it in a profesional presentation. It is also completely random and occurs at least once a minute during playback. This only occurs on the new MacBook Pro's that have the NVIDIA graphics card. It does not occur when using the laptop's LCD display only - ie: no 2nd output used. It does occur on the laptop's LCD if a second display/projecter is plugged in. This does also not occur on my ATI equiped MacBook Pro 15" or my G5 or my iMac.
    It appears to be a problem with the NVIDIA card.

    hi!
    i got the same problem with the 15 inch 2.4 Macbook Pro and
    Digital Cinama Display through Final Cut Pro.
    Looking like a NVIDIA driver problem - hoping for leopard............
    joe

  • Guitar rig 5 compatability with Logic Pro X in monitor and playback?

    Guitar rig 5 output very distorted in Logic Pro X in monitor and playback?
    Worked fine in Garageband, do I need to change any audio settings in Logic or Guitar Rig?

    Hey guys, I am trying to demo Guitar Rig 5 and it wont let me install it, once I download the demo.
    Any ideas?
    I have been searching high and low

  • My 2nd Monitor not showing up as a Video Device in P Pro Preferences- Playback

    I'm on P Pro CC (Windows) and want to add my 2nd monitor (a Samsung HDTV via HDMI) for editing.  It's all connected, but when I go into Edit->Preferences->Playback, I just see one video device and that's the Adobe TV.  It doesn't show a 2nd device.  Any ideas on how to get this going so I can use the 2nd monitor to display the program monitor separately?  Thanks.  (BTW, the computer itself is able to recognize the monitor, because it mirrors the computers display.)

    Yeah, you were on the right track.  Finally figured it out, and I had my computer display settings for mirror.   I changed those to some other setting (can't remember), and then Premiere recognized it as a 2nd monitor.  As soon as it worked, I was smacked with the image of video on the new monitor...and that monitor's quality was horrible.  So time to return the monitor, and leave dual monitor setup for another day when I have time to research and get a good monitor.  Plus all audio got piped into monitors **** speakers...so I will have to sort the audio out when I sort the new monitor out.  Another day.  Thanks for the reply.  Editing that feature I was prepping the last time we spoke on audio quality, 24/96 etc, so thought dual display would give me some more real estate when dealing with clips in the timeline.  Next feature, we'll definitely set up editing station properly ahead of time.

  • Output Configuration for Monitors/Mic and Interface Trouble Within Logic Pro X

    1.) I'm currently using a Shure SM58 connected to mic input 1 on an Alesis iO2. I'm getting no levels from the microphone itself when I attempt to record, and the levels on the interface itself are weak (never reaching above -20db). I'm new to this, so how in the world can I get this thing to record? My drivers are up to date regarding the interface.
    2.) I'd like to use my pair of speakers as my primary listening source, but I'd also like to monitor through the headphone port on my interface at the same time. Is this possible?
    There are obviously tons of questions related to these two, but I've exhausted a lot of potential solutions already with no luck.

    Hello Heart-A-Tact,
    The articles below explains how to setup your audio interface with Mountain Lion and Logic Pro X.
    The first step is to make sure you have the most recent drivers installed from Alesis.
    Logic Pro User Guide - Connect an audio interface
    http://help.apple.com/logicpro/mac/10/#lgcpebe92ce0
    Audio Midi Setup: Audio Devices window
    http://support.apple.com/kb/PH5169
    Logic Pro User Guide - Devices Preferences
    http://help.apple.com/logicpro/mac/10/#lgcpbb81aca5
    Logic Pro User Guide - Connect MIDI Keyboards and Modules
    Logic Pro X Help: Connect MIDI keyboards and modules
    Cheers,
    Judy

  • Using Alesis multimix 12, Alesis 520 usb powered monitors on a macbook pro with apple logic pro 9

    I can only get sound from my mixer and logic pro 9 from my internal comp speakers, but when I connect the usb powered monitors no sound. I can play itunes through the monitors but for some reason I cannot use the multimix and powered montiors, both being usb, at the same time. Any suggestions?

    Yes, but when just the multimix is plugged in it finds it in input, and when I connect the monitors it takes away the input and then the speakers are in the output but I cannot use them togther. Last night I coneceted the Alesis io2 interface and works, actually sounds better with my guitar tracks than the mixer.

  • MBP Display flicks off while using Logic Pro and external monitor

    Hi there
    I have the MBP conected to my external 19" monitor. While running Logic Pro 7.2 the MBP will, for no apparent reason, turn its diplay off and logic will crash. The external monitor will still be on. And I can still move the mouse onto this monitor.
    I then have to hold down the start button to force the machine to restart. This only started to happen after 3 months, but now it happens twice a week or so.
    Anyone else experiencing similar problems?
    Mbp   Mac OS X (10.4.6)  

    You may want to check these threads to see if they match your problem
    http://discussions.apple.com/thread.jspa?threadID=570540
    http://discussions.apple.com/thread.jspa?threadID=539425
    http://discussions.apple.com/thread.jspa?threadID=546601
    Reverting to 10.4.6 solved my issues.

  • 2nd monitor went black after upgrading on macbook pro

    Ive read post; however, i need help with getting 2nd mointor to work.  it was working fine before upgrade but now jsut black. I was hoping there was a new solution to fix this thuderbolt / 2nd monitor thing.  Im not comutuer tec. guy so I was hoping the apple systems where a good plug and play.
    any help out there??
    thanks

    My best guess is that you have fried the RAM with static electricity charged up in your body. According to OGELTHORPE a beep on startup is because of no RAM, if when installing you did not do it correctly, you could have fried the RAM, which then your mac will not recognize it. The same with the old RAM, if you tried to re-install it and didn't pull up your sleeve and rest your arm on the inside of the chassis, then it is fried, or if you didn't wear an ESD band and connect it to the the chassis, then it is fried.
    Seen as though you can't startup your mac, I can't say to do an AHT, buy some new ram, and start with the lowest one you can, so its cheap for ya use a different company incase is that;) Crucial.com is really good, I got an 8gb upgrade from 2gb. Let me tell you, it's great!
    Reply back;)
    Chris

  • Logic Pro - 2nd installation

    Hi,
    I need to install Logic Pro 9 (Mainstage) onto a second MacBook for a gig I'm doing.
    I understand that my license for Logic extends to 2 installations, a desktop and a laptop, but my first laptop IS my desktop computer, hence the second installation.
    It's telling me that the serial number's not vaild, but I know it's correct...
    Is there a way around this?
    Thanks!

    Check that you are not transposing "0s and "o"s etc. If the two machines are not connected to a network together, the number should work.

  • Please help! Logic Pro 9 & Motu 8 pre

    I recently upgraded some of my home studio gear, and in that just added a second MOTU 8pre.
    Here's my roadblock...
    I'd like to run both MOTU 8pres so that I can record 16 tracks simultaneously.
    Using the built in CueMix Console I can monitor all 16 tracks.
    (I'm using 1st Motu as my main interface with optical outs from the 2nd Motu into the optical inputs of the 1st Motu.)
    But once I try to monitor or record channels 9-16 through Logic Pro 9 (even garage band) I get no signal whatsoever.
    Maybe I'm missing something, or haven't turned something on. I've checked preferences, etc. with no luck.
    Please help! Is what I'm trying to do even compatible between Logic 9 and the MOTU 8 pres??
    Thanks in advance,
    Lucas

    Izzy.Bear wrote:
    I recently upgraded some of my home studio gear, and in that just added a second MOTU 8pre.
    Here's my roadblock...
    I'd like to run both MOTU 8pres so that I can record 16 tracks simultaneously.
    Using the built in CueMix Console I can monitor all 16 tracks.
    (I'm using 1st Motu as my main interface with optical outs from the 2nd Motu into the optical inputs of the 1st Motu.)
    Lucas, it may not make any difference in this situation but the standard setup for digital devices is to have a single lightpipe/ADAT cable from the digital output of the second MOTU into the Digital in of your 1st, (main) MOTU. The 2nd MOTU will be the digital clock master with the 1st MOTU slaving to the digital clock of the 2nd unit.
    That is.. unless you're using a third party digital clock driving both units.
    p.s. Trust me on the single lightpipe cable.
    pancenter-

Maybe you are looking for

  • Acrobat 9.4.2 does not save/export all graphic formats

    Dear all, Obviously i had my glass of wine to early! See http://forums.adobe.com/thread/798630 for the whole story of my re-re-re-istallation of Acrobat. The installation of 9.0 from the TCS2 DVD was OK After update to 9.2 my tests displayed correct

  • Re: Forms

    Hello everyone, I'm trying to connect to forms builder, but I receive an error stating "Ora-12203 Tns:unable to connect to destination. This is a trial software from oracle as I am studying to become a OCP. I'm not sure what the problem is, Can anyon

  • Basic monitoring question!

    this should be easy, i'm even embarassed to ask! i've only recorded on my own till now, just plugging my headphones in the back of the computer. but how can i record someone else, and be able to listen along and play engineer?

  • Smart View Essbase Queries 9.3.3 & 9.3.1

    I'm having some difficulty isolating the cause of this problem. I have SV 9.3.3 & create an Essbase query, this is then opened & refreshed by a user who has SV 9.3.1, but the POV resets back to the default members 'Account', 'Entity' etc. Is it becau

  • Reverse Document using transaction MR8M

    Dear Experts, I have a problem that need to be adressed immediately. Have an Invoice.If we display it using "MIR4" - Under "payment" Tab ,there is the BaselineDt (Say 11.11.2011) and Due on (Say 25.12.2001).         payterms is  44 days Iam cancellin