2nd monitor view

Hello, if this feature is already implemented please tell me where!!
It would make a lot of sense to me to allow a second / external monitor output / overlay, much like you can do in Premiere through the program monitor's playback settings.
When I'm on set, as the director, I don't want to be tied down to the laptop that's running OnLocation.
It would be practical, intuitive, and AMAZING in general to include the ability to see the video feed coming from the camera both on the primary monitor for the recording operator's use (with the vector scopes, etc) and an overlay output via the second monitor (HDMI / DVI / VGA) so other people, such as director, makeup, clients, etc can see just the video signal.
Often the laptop screen isn't the greatest, and being able to connect to a high quality monitor would be very helpful as well as practical and convenient.
You would want it to show the video being recorded / live image, and then when playing back, it would show the playback, just like OnLocation currently does.
I dunno - this just seemed to make sense.
Thanks very much!

I guess it's a bug.
(In case you wonder about my setup: my second monitor is smaller and I prefer to use it for tool panels etc. It would also be ideal to carry the Lightroom grid view by default for quick navigation, while working on the individual images on the first monitor. Not too far-fetched a setup, I guess.)
No it's by design. The grid on the second monitor is actually a vertically stretched version of the filmstrip. So, you can forget any ideas about being able to edit multiple images on the second monitor.

Similar Messages

Lightroom 4.2 - Experiencing problems with images viewed on 2nd monitor

Hi All,
This problem seems to have started with my updating from 4.1 to 4.2. I have my second monitor set as Loupe - Normal and Fit. As I crop an image on my main monitor, the 2nd monitor view does not always change to the cropped view. If I switch to a different photo and then back to the one I just cropped, the 2nd monitor view will then show the cropped image, but it is almost always blurry. Sometimes I can click the image in the 2nd monitor view to change to a 1:1 view and it will look sharp, and then click again back to Fit and then it too will be sharp. Other times I get a message in the 2nd monitor view that says "no image selected" and bouncing back and forth between a different image will correct this.
This all started off with the majority, but not all cropped images showing as blurred and progressed to what I have described above. I seriously though I had a focus problem with my camera!
Is anyone else experinecing this since updating? Suggestions?
Below is the suggested information to provide...
What version of Lightroom? 4.2
Have you installed the recent updates? Yes, 4.2
What operating system? Windows 7 Ultimate 64 bit
What kind(s) of image file(s)? All images are converted to .dng upon import
If you are getting error message(s), what is the full text of the error message(s)? No error messages.
What were you doing when the problem occurred? I am in the develop module cropping images etc.
What other software are you running? Silver Efex Pro 2, but I have had that installed in many prior versions of Lightroom
Tell us about your computer hardware. How much RAM is installed? 32 GB - Yes, I know - overkill...
How much free space is on your system (C:) drive? 119 GB of 223 GB of my solid state drive c:\
Has this ever worked before? Yes
If so, do you recall any changes you made to Lightroom, such as adding Plug-ins, presets, etc.? No other changes other than updating to 4.2
Did you make any changes to your system, such as updating hardware, printers or drivers, or installing/uninstalling any programs? No, no other changes.
Thanks!

Same problem. Not a soloution, but this may be relevant.
http://forums.adobe.com/message/4782916#4782916
Alan

Viewer on 2nd Monitor Problem

I just upgraded FCPX to 10.06 and when I show "viewer on 2nd monitor" the image is all screwed up and distorted, almost like it lost sync. This has never happened before. Has anyone had this happen after upgrading FCPx??

I checked the connections. If I output the event viewer to the second monitor then its all correct. I've found a work around but it's very strange. I had the second monitor on top of the main monitor in the display preferences for monitor arrangement. When I move the 2nd monitor to the right of the main monitor in the preferences and quit FCPX and re-open FCPX, it then works fine. I never had this issue before I upgraded to the next version 10.06. Try putting your 2nd monitor on top of the main monitor (in the display preferences) and then output the Viewer to the 2nd monitor. Curious if you get the same problem.

Lightroom 4.3 - Focus problems with images viewed on 2nd monitor

I had this problen on 4.2 and heard there was a fix, but alas the problem has cropped up for me agian. 2nd monitor in Loupe Mode. It doesn't seem to render the image, it's just soft, on the verge of pixalation. The quickest solution is to quit LR and re-satrt and it works for a while.
Lightroom version: 4.3 [865747]
Version: 10.6 [8]
Application architecture: x64
Logical processor count: 4
Processor speed: 2.6 GHz
Built-in memory: 8192.0 MB
Real memory available to Lightroom: 8192.0 MB
Real memory used by Lightroom: 544.8 MB (6.6%)
Virtual memory used by Lightroom: 1049.8 MB
Memory cache size: 235.6 MB
Maximum thread count used by Camera Raw: 2
Displays: 1) 1680x1050, 2) 1600x1200
Any ideas?

Same problem. Not a soloution, but this may be relevant.
http://forums.adobe.com/message/4782916#4782916
Alan

2560 x 1600 is gone from my display settings (2nd monitor)

I've been running my 15" retina macbook pro for more than a year now with 27" DELL monitor and it has alway been using 2560x1600 resolution display.
In the past year i've had no issues with mirroring my screen to big screen TV using Apple TV, however today something weird happened.
As usual i mirrored my screen using Apple TV to watch some videos and i had to change some of the display settings to get the best view on my TV.
Afterwards i switched off the mirroring feature and now my 2nd monitor (DELL 27") is displaying 1920x1080 only. I looked at all my options on my display settings (using ATL+click ) and 2560x1600 is gone missing from the list. Im frustrated and couldn't find an answer to this problem, please advice.
Couple things i tried;
- restart & shutdown
- reset NVRAM & PRAM settings
- changed mini display cable with another
- reset monitor settings
Weird find:
I tried to mirrored my macbook pro to apple TV again to see the display settings. Guess what, the option for 2560x1600 is now back on the list and working (visually) just fine. as soon as i turned off the airplay display my 2nd monitor turns back to 1920x1080.
Note: the display on my retina macbook pro is working just fine, no problem at all. this is only showing on my 27" DELL U2713HM.

Hello! Just want to ask about mirroring: when you MIRROR the Retina MBP 15" to your Dell Monitor (2560x1600) : do both the MBP and Dell Monitor look sharp and crisp?
I'm asking because I'm also considering a monitor that's at 2560x1600.
Thanks so much!

2nd monitor not using all available pixels

So am I the only one having this issue? -
I have a Mac Mini that is running Windows 7 in bootcamp. I have 2 monitors. My 2nd monitor is connected with an HDMI to DVI cable. In Windows, the whole screen of both monitors is used (edge to edge, top to bottom). But when I switch over to Yosemite, my second monitor has about a 1 inch bar of black on both sides and a 1/2 inch bar along the top and the bottom. This is literally unused space.
I've talked to Apple Support several times but they don't seem to have an answer. I get transferred to someone but each time I get cut off. (so I gave up trying to fix this over the phone or on line chat). There are no features or selections in the Syncmaster to adjust this. Why does it work perfectly fine in Windows but not when I switch over to Yosemite.
Maybe this doesn't seem like a big deal but it's so frustrating that I'm actually finding myself not wanting to use the Yosemite side.
Does anybody have a solutio

Sorry:
Display TypeLCD monitor / TFT active matrix
Diagonal Size20 in
Aspect RatioWidescreen
Native Resolution1600 x 900
Pixel Pitch0.2768 mm
Brightness300 cd/m2
Contrast Ratio1000:1 / 15000:1 (dynamic)
Color Support16.7 million colors
Response Time5 ms
Horizontal Viewing Angle170
Vertical Viewing Angle160
FeaturesHDCP, MagicBright 3, MagicTune
Dimensions (WxDxH)19.1 in x 7.9 in x 14.7 in
Weight9.7 lbs
ManufacturerSamsung model 2033SW

2nd Monitor died - How does one grab tools back from "that" desktop?

Hi -
One of our two monitors died. There are tools on the 2nd monitor's desktop that we can't "see" until the 2nd monitor returns. How do we pull those tools over to the main desktop?
Also, there are a few finder windows that are too large to grab the bottom scaler and shrink them back. (There is no tool bar on the top of the second monitor giving just a little bit more room.) Is there a minimize button somewhere for "finder" windows?
Thanks!

Ps - just found the "zoom" button on my own - so - I have the finder windows under control - now to learn how to get to that other desktop without the view into the other desktop!

Final Cut Pro 2nd monitor not working properly?

Been here before a long time ago, can't remember how it was resolved.
Working in a new edit suite, FCP Studio. Two new Samsung monitors (not my choice). I want one to be my playback monitor.
I set:
Final Cut Pro > Audio/Video Settings
> Digital Cinema Desktop Full Screen
> View > External Video > All Frames
But all I'm getting is a black frame on the 2nd monitor.
They've also got one of those very flat alluminum keyboards ... where F12 becomes a sound control. I'd love to know how I can change the function key to work as an FCP action / 2nd monitor toggling on and off.
That's two questions. Would be most appreciative of an answer for either.
Ben

Hey Andy,
I did the first half of your suggestion, but not the second half. Heading down to the studio this morning ... set up in a tiny white chapel looking out across the silvery North Atlantic ... and will try the second half of your suggestion. Will also see if there are two graphics cards installed in the Mac Pro. Will also check out the Window > Arrange in FCP (something I should have checked first off).
I talked to a filmmaker who previously worked on the system, only to discover he never uses the second monitor as a full screen, but rather as a large 'bin'. Interesting.
If worse comes to worse and I can't solve it I suspect I could size the canvas window to super large and drag it over to the second monitor.
Will post back when I've tried the latest suggestions ...
Thanks you mucho guys,
Ben

Preview Playback on 2nd Monitor

I am brand new to the Final Cut AND Mac World - just got my first Mac with Final Cut Studio two days ago.
I am having some problems getting preview playback on my 2nd monitor in RAW or full screen, neither work. What I get is the current frame of the timeline, no moving video and I get audio playback.
I have View -> All Frames checked (as opposed to single frame) but I get the same results as if single frame were checked.
My primary monitor with the standard final cut layout is an Apple 20" cinema, and the 2nd monitor is an older 17" Samsung.
I get the exact same result if I switch the full screen preview playback over to my Apple display. Just the current frame with audio playback.
Any help on this would be greatly appreciated!

New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Patrick

Outputing to 2nd Monitor

Our facility is streaming using Adobe Media Live Encoder. We are building a new facility and I want to send the output of the stream to NTSC output of my video card so we can monitor the stream from the office area. My goal is to have the output of all 3 channels on a quad view monitor with our 3 channels and the front door security camera. We are currently using Flash Media Live Encoder 3 and I don't see any options for outputing to a 2nd monitor.
Thanks,
Louis Glab
ECTV
Operations Manager
www.ectv.com

Dennis,
Thanks for the reply. If by "quit" you mean minimize, then yes it does, but if I actually quite the application and reopen it, it reopens on the primary screen and I have to drag it again to the secondary monitor. At first I thought it might just be the app, but all of them do the same thing (iTunes, Safari, etc.) Is there any special setting that needs to be set in order for it to work?

Sanyo LCD TV as 2nd Monitor flicks to black & pops

Hey All,
2.66 Mac Pro running Mavericks 10.9. I plugged in my Sanyo DP42849 via HDMI using a(n admittedly third party) Mini DisplayPort to HDMI converter dongle. I should mention, I've never attempted to use this TV as a 2nd monitor, but I have used the same dongle and a Panasonic 1080p 42" tv with no issue (albeit not on Mavericks)
When I plug it in, if it recognizes the signal at all, it alternates between the desktop background for anywhere from 0-4 seconds, and black for 0-5 seconds. Inconsistently, sometimes there will be a signal pop coming from the TV.
Is this a TV issue? A Mavericks issue? A dongle issue? A Graphics Card issue? What's going on here?
I have tested 2 different HDMI cables (same result), but I only own one dongle.
When I go to the displays menu, refresh rate is greyed out, and changing the resolution does nothing towards stabilizing the signal on the TV.
Thanks for your help!!

Well the lcd that I provided the link for would be the production monitor to hopefully see how a television would view the finished product. I've got my eye on something like the Acer AL1916W - 19" LCD WideScreen for my widescreen #2 monitor. *just in case I confused anyone. As you suggested though, I will be researching more for the # monitor. Thanks again.

HOw to add a 2nd monitor to my DX4380- UR22

I only have my HDMI open and my monitr is an older version using a SVGA
This question was solved.
View Solution.

Hello there ArsenalOC1886!: to answer this question specfically
why not buy a cable that has the HDMI on one end{the PC} & a SVGA at the other(the 2nd monitor)
or get a HDMI\SVGA adapter at your local computer shop
with plug & play being as advanced as it is itshould work unless it's incompatible
good luck
hope this enlightens, clarifies & helps
spacechild

Full Screen Problem With Dual Monitor Viewing

I have a 64 Bit system, Chrome browser and with flash player built in. I am attempting to view videos on a 2nd monitor while working on the primary monitor. I have tried this on various sites, TNT.tv, USANetworks.com, etc... I select full screen viewing. A message is displayed to exit full screen press escape. However, when I attempt to do anything else automatically exit full screen on the second monitor. This should not be an issue and with the way most people view video online, they are doing so on a 2nd monitor or TV. I have done a google search and it is a common problem, but there is no solution that seems to work.

I have just posted the same question - missed yours.
Adobe could you take a look into this - I think solving this problem can't be that hard.
jef

Keeping a 2nd monitor in Grid mode

Hello,
I'm trying to keep a 2nd monitor locked into grid mode? For example when editing; monitor 1 is in Loupe mode, 2nd in Grid mode when I do a find the monitors will switch modes? So the 2nd goes from grid to loupe and the main monitor goes to grid mode.
Thanks in advance for any help.
Jeff

I guess it's a bug.
(In case you wonder about my setup: my second monitor is smaller and I prefer to use it for tool panels etc. It would also be ideal to carry the Lightroom grid view by default for quick navigation, while working on the individual images on the first monitor. Not too far-fetched a setup, I guess.)
No it's by design. The grid on the second monitor is actually a vertically stretched version of the filmstrip. So, you can forget any ideas about being able to edit multiple images on the second monitor.

2nd Monitor ICC profile in Acrobat 9

Hi,
I have problem with iMac24" dual monitor setup and Acrobat 9 Pro. I can't get the second monitor ICC profile applied to the pdf document when dragged to the the second monitor. Had the same problem with PhotoShop CS4. I spent several day to figure out why the second monitor looks totally over saturated with PS CS4 (looked fine with PS CS3) and yes indeed the solution was to turn OFF OpenGL in PS preferences. Still have the same problem with Acrobat 9 Pro. When the document is dragged to other monitor the ICC profile of that monitor is not applied. Any idea how to get that working as I can't find the OpenGL setting in Acrobat 9 . I have iMac24" and HP LP2475w as a secondary monitor which is wide gamut monitor which is far too over saturated without proper ICC. Any ideas?

Jao...
Does the secondary monitor always assume it will open in the monitor which WinXP defines in settings as '2'?
The reason I ask, is that if I have the secondary monitor open as "full screen" it opens on the 2nd monitor.
However, I have a slightly different set up. I have my primary LR space stretched some into the 2nd monitor, so that the right hand panels are on the second screen. This gives me a larger space to view the images on the main screen. When I open the secondary LR space, it is not full screen, but sized to just fit in the rest of the available space on the second monitor....and I usually use this space for the 'grid' of thumbnails.
My concern is that if the secondary LR space is even slightly larger than the available space on the secondary monitor, it will pop up in the middle of the primary monitor. After much trial and error, I found the sizing solution and it works....
However, since it seems to open either in #1 or #2 screen, I still have this nagging question....and there is no way I know to query LR to know what ICC profile is being used.
Thanks...JOHN

2nd monitor view

Similar Messages

Maybe you are looking for