2nd Request - PCI Memory Controller for ThinkPad T500 2081-CTO OS Vista 64bit

Evidently the PCI Memory Controller driver is not installed on my ThinkPad T500 2081-CTO OS Vista 64bit and shows up as an error when running the Lenovo System Tool Box.
Searching this forum I found one psot as follows BUT thisis for a T-200 laptop.
Re: Driver for PCI Memory Controller
Options
‎02-25-2009 06:59 AM
You need the driver for Intel Turbo Memory. Only Windows Vista can use Turbo Memory, so we only have a Vista version for the driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67820
Is this driver appropriate?
Do I need the PCI Memory Controller driver .. and if so where do I find it for my laptop?
Thanks.
Solved!
Go to Solution.

I would suggest that you forget about turbo memory. Intel quit talking about it and they have not released a driver since 2009. That is 2 years before service pack 1 was released. I ran tests and I was never able to measure any improvement with a card installed. As far as I am concerned, it is just something else to break and interfere with other components.,

Similar Messages

Satellite Pro A200-1MI - Need driver for PCI memory controller

I have the Toshiba Satellite Pro A200-1MI(PSAE7E) having a problem with PCI Memory Controller on my notebook.
When I go to Device Manager it shows question mark in the tab Other Devices and when I go there, it's yellow ?(question mark) and !(exlamation mark) at PCI Memory Controller. I took and downloaded all the drivers from your site:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
for XP but I am not sure what type of drivers do I have to install for PCI Memory Controller, is it bios driver or something else? I just need to know what to install to overcome that problem with my Device Manager and PCI Memory Controller.
Thanks in advance!

Hello akibono
I presume you have installed clean WXP on your notebook and now you want to install all drivers, tools and utilities. Am I right about that?
Anyway, after WXP installation you must install all drivers, tools and utilities in specific installations order. After doing this everything should be OK and every hardware component will be properly configured.
Please install all stuff as follow:
WXP
Chipset driver
Display driver
Sound driver
Modem driver
Storage manager
LAN driver
Touchpad driver
WLAN driver
Toshiba Assist
Flash Media driver
Webcam driver
Hardware setup
Controls
And so on
I hope everything will be OK.

Missing Windows 7 64-bit PCI Memory Controller Driver on X61

I'm sure this has already been discussed but I could not find the thread. Does anyone have any information on why I cannot find a Windows 7 64-bit compatible PCI Memory Controller Driver for my X61 7675 CTO?
Thanks,
-Ron

PCI Memory controller is Turbo Memory:- http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-67820
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Can not find driver for Thinkpad T500

I can not find driver for Thinkpad T500? Could you please help me?
Moderator edit: Matched Subject to content.

Thanks to the folks at Kepware. I was able to get this working for CompactLogix L32E.
Step 1: In NI OPC Server Create a new Channel. Channel Name can be whatever you want.
Step 2: Device driver will be ControlLogix Ethernet. You can also enable diagnostics if you want.
Step 3: Network adapter. I used default setting.
Step 4: Write only latest values. Duty at 10. ( These are default settings and are recommended.)
Step 5: Finish new Channel setup
Step 6: Click on Icon to create new device
Step 7: Device Name can be whatever you chose.
Step 8: Select Device Model in this case CompactLogix 5300
Step 9: Device ID For me was IP Address XXX.XXX.XXX.XXX,1,0 (Note the 1 directs path to backplane. The 0 to the slot where processor is)
Step 9: Device timing. Leave at defaults.
Step 10: Auto demotion leave unchecked.
Step 11: Leave at defaults Do not generate on startup Delete on create and allow subgroups
Step 12: Port and watchdogs at default settings
Step 13: Project options leave at default. (In my case I changed to short as that is what most of my tags were)
Step 14: Create tagname from device.
Step 14: Finish Device setup.
You now have two options.
Option 1: Start creating tags as you need them. (This is what I did)
Option 2: Right Click newly created device and select properities. Then select database creation and click auto create.
Go To Lookout and create new driver.
Select OPC Client
Server name will be from dropdown menu. National Instruments:NIOPCServers
Click okay
You should be done and smiling.

Need PCI SCSI controller for Sparc

I am perplexed at how difficult it is to get a Sparc-based PCI SCSI controller. I need help. If I search man section 7d of Solaris 9 I can find glm, isp, mpt, ncrs, and syshisl which appear to be drivers for PCI SCSI controllers on Sparc, but no idea of where to buy one (none of these are Adaptec, which I do know where to buy). If I search the Sun Store I can find part numbers for SCSI controllers but absolutely no description of them or which drivers they use. If I search the Sun documentation site I can find a few SCSI controllers mentioned but not referred to by the part numbers on the Sun store, so I still cannot get ordering info. When I search BigAdmin for driver support I find the pages dont tell me which architecture a driver is for. For example, I look up common Adaptec controllers and find drivers such as adp, cadp cadp160 but the web pages neglect to say they are for x86 only.
This is what I need- PCI SCSI controller for SunBlade 100 and SunFire V120, Ultra 2 (LVD).

"... the SSH is your friend..."
"... the SSH is your friend..."
"... the SSH is your friend..."
Go online to the Sun System Handbook. It's your resource for hardware information.
http://sunsolve.sun.com/handbook_pub
You find the SB100 and the V120 in the list of EOL systems (both are discontinued models).
http://sunsolve.sun.com/handbook_pub/Systems/eolSystemList.html
For each computer, you can review the "Full Components List" link,
where there is a section that displays SCSI adapters,
including their part numbers and their sales option numbers.
You will be able to see that there was only one LVD card qualified
to function properly in the V120. You will also be able to see
that there weren't any LVD cards ever qualified in the SB100.
I anticipate the x6758a card will work fine in both, .
The SunBlade 100 desktop system is so old that it was already End-Of-Llife (EOL)
before Sun started to ship the SCSI card. Thus there was no reason
to go backwards and qualify the card to a disco'd platform.
If you do decide to purchase and install that card, be sure to read its manual carefully.
You will need to install separate driver software to the computers.
The QUS drivers ship with newly purchased x6758a cards, or can be downloaded from Sun.
... not difficult at all.

PCI memory Controller

Hi all
How do I get rid of this yellow question mark in Device manager
Says
PCI Memory Controller no drivers loaded.
Running K9N4 Ultra F with Sempron 3000 CPU 1 gig Ram
Win Xp Home new copy and sata 160 gig drive Seagate.
ATI video 1300 card PCI express
Is this cause the raid drivers are no installed?
Thanks

What ram are you using?

To request my serial number for Adobe After Effects to upgrade to 64bit system

I have AE cs6 and I need to upgrade to 64bit system.
How and where to request my serial number for Adobe After Effects to upgrade to a compatible 64-bit operating system? (because no customer service answered me)

I don't understand your problem.
After Effects CS6 runs on 64 bit systems. You use the same serial number you use on a 32 bit system.
If you want to upgrade to the CC subscription version, you can do so on the Adobe website.
What do you mean that no customer service answered you? Did you speak to Adobe Support? What did they say?

Video Controllers for ThinkPad T500

I somehow managed to delete the Video Controllers. The computer tells me to reinstall them, but I don't have the installation software. What do i do?

What is the full model no of your t500? xxxx-xxx.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

ThinkPad T60 8741-4SU + windows vista 64bit // temperature problems

ThinkPad T60 8741-4SU - High temperatures
Hi i recently upgraded my pc, bought set of 4gb ram (2x2gb of kingston ram), at that time i was running on windows xp prof sp2 and everything was fine, temperature was ok, idle at ~45C, burn ~70C.. Since i changed my os to windows vista ultimate 64 bit, temperatures are extremely high, idle is around ~60C and if i try to run some stability test that uses both cores at 100%, the temperature gets to ~95C and then i rather quickly stop it, because i dont want it to raise more and do some serious damage..
I dont have any lenovo software installed, i rather use the default stuff in windows - seems more user friendly so far.. So far i downloaded tpfancontrol to see if the fan is working properly and it seems it is, if i manually set it to max RPM, i can hear it, but the temperature is still about the same..
The other thing i am worried about it is that my intel t7400 is supposed to have max voltage at 1.3V, but i often see in Everest monitoring software, 1.36, CPUID shows 1.363, which is more than is supposed to be there, i was trying to see, if something is messed up in BIOS, but there is nothing about voltage - nothing that i can found..
My bios version is 1.03, windows vista ultimate 64bit - fully updated, outside temperature - the same, maybe even lower, laptop is sitting on the wodden desk.. Power setting at windows is set to Balanced, if i set the power saver- system is slow and with high performance the temperatures are running very high in the iddle.. I have the laptop for like 8months..
Other temperatures - idle
1 cpu 58°C (0x78)
2 aps 46°C (0x79)
3 crd 42°C (0x7a)
4 gpu 61°C (0x7b)
5 no5 50°C (0x7c)
7 bat 36°C (0x7e)
9 bus 44°C (0xc0)
10 pci 54°C (0xc1)
11 pwr 54°C (0xc2)
I think i havent forgotten anything, please and thanks for help and helpfull comments!
Thanks
Message Edited by whiller on 06-09-2008 01:13 AM

make sure your ventilation ducts are clean from dirt, Vista put lot more strain on every component of your laptop, so the temperature increase should be normal. Xp is lot less demanding on computer compoents, however it does sound like your heat ventilation fan and fins are clogged with dusts. So open up the laptop to clean away any dusts that maybe there.

Looking for a downloadable windows 7 or vista 64bit

Hey guys. I had windows 7 on my mac, but it was 32 bit, and the game i was trying to play kept disconnecting me because it doesnt support 32 bit. Ive been trying all day to find a good windows 7 or vista thats 64bit. Can someone please link me with a downloadable version, and it must be 4.7gb or under because thats what my disks hold. Thanks

You have to purchase Windows, I believe that Microsoft and Amazon's online stores can supply a download if you choose.

T500 Vista 64bit Video Driver

Hi,
i used the driver from the download site for may notebook, but it doesnt works.
i have a T500 2089-CTO an Vista 64bit. someone an idea?
thanks
Stefan

that only afects the system when running on battery. it shouldn't conflict with anything else.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Satellite Pro P300: Need Vista 64bit 'Mass storage controller' driver

Hi, please help.
I've just upgraded my laptop from Windows Vista 32bit to Vista 64bit.
I've managed to find all the drivers apart one: The 'Mass storage controller' driver (yellow exclamation mark in Device Manager).
I don't know where to look for this driver.
Any help would be appreciated. Al

Hi
I assume you didnt search in forum for similar questions? Is it right?
I think Im right because I searched in the forum and found this Toshiba FAQ doc.
+No Windows XP driver for PCI Memory Controller+
http://aps2.toshiba-tro.de/kb0/TSB83023N0000R01.htm
Here you can find this text passage:
After installing Windows XP there could be a yellow exclamation mark by a "PCI Memory Controller" or *"Mass Storage Controller"* in the device manager.
_Solution:_
This device is likely the Turbo Memory former Robson module.
This hardware will only supported by Windows Vista.
Therefore there is no Windows XP driver.
Now everything should be clear ;)

Windows 7 driver for PCI Simple Controller

I installed the Lenovo Windows 7 Professional upgrade on my R400 (7443-CTO) from Windows XP Professional. The ThinkVantage tools repeatedly shows I need a driver for the "PCI Simple Controller". I have been unable to find that driver on the Lenovo support site. Any assistance to help resolve this issue would be appreciated.
Solved!
Go to Solution.

To create shortcuts or folders under the startmenu in Win7 you can rightclick "All Programs" under the startmenu. Then you can choose "Open" or "Open all users". If you choose "Open" you will be able to change the startmenu for the current user account only and when you select "Open all users" you can change the startmenu for all user accounts on the computer. The startmenu in Windows is basically just folders and shortcuts stored in a folder on your computer. The startmenu for all users are stored under "C:\ProgramData\Microsoft\Windows\Start Menu" and for the current user under "C:\Users\<useraccount>\AppData\Roaming\Microsoft\Windows\Start Menu"
So let's say you want the "Thinkvantage" folder under the Windows startmenu where it should normally be after installing Lenovo toolbox and then the shortcut for Lenovo Toolbox under that folder. Then you can rightclick "All Programs" under the startmenu and select "Open all users" from the context menu. You should then see a explorer windows with the folder "Programs". If you open the "Programs" folder you will see the same contents as you see under the "startmenu -> All Programs". Since this is the area for the common startmenu for all user accounts there might be some more entries under the startmenu compared to what you see in this windows. By selecting "Open" instead of "Open all users" as explained above you should find the rest. So when you rightclicked, selected "open all users" and then doublecliked on "Programs" then you can rightclick somewhere in that window and choose "New -> Folder" from the context menu. Then you can give the folder the name "Thinkvantage". Then open the "Thinkvantage" folder and create a shortcut for Lenovo Toolbox. After you have done these steps you should find the Thinkvantage folder under "All Programs" and then the shortcut for Lenovo Toolbox under the Thinkvantage folder. This is how you can easily change the startmenu in Windows to add, remove or change entries under "All Programs".
Normally after installing Lenovo Toolbox it should be under "All Programs -> Thinkvantage" and not sure why that is not the case for you, but then you can add it manually like explained above. When i installed Lenovo Toolbox a shortcut and the Thinkvatage folder was created under "All Programs" during the installation. Also if you install the "System interface driver" and "Hotkey feature set" you can start Lenovo Toolbox by pressing the blue thinkvantage button on your computer. Unless you already installed "System Update 4.0" i would recommend to do so. System Update will find the drivers and software from Lenovo for your computer and give you a list where you can select those you want to download and install. System update will then download and install the drivers and software you selected and you don't have to download and install each one of them manually one by one. It will save you a lot of time. You can find system update for Windows 7 using the link below.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73695
User Access Control is a new feature of Windows that started with Windows Vista so therefore you won't find it in XP. Only Vista and Windows 7 got UAC.
Yes it's a bit late over here I'm sure i will enjoy the weekend and hope you will do the same.

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it.
Alex D
Applications Engineer
National Instruments

??? iMAC 2012 27" used as display for LENOVO THINKPAD T500 ???

I have a Lenovo Thinkpad T500 (must use for work) and my home computer is a 2012 iMac 27". I would liek to use the iMac as an external display for my thinkpad. I've read everywhere online and haven't found the answer I'm looking for!
I bought a displayport TO minidisplay port cable (both male ends) and connected the imac + thinkpad. Executing CMD f2(displayport activating function) does nothing though. I've tried fn+CMD+f2 etc..etc.. I've read these cables can go BOTH ways... (but have also read some only go one way?) The thinkpad has a dvi output as well but I was hoping to use this DP/MDP cable to connect the two computers as it seemed more logical than using the old DVI/VGA formats...
Has anyone got any experience doing this or anything that might help me solve this dilemma.
Thanks for your time!

Hi, if it doesn't have a real MiniDisplay Port, I doubt the adapter has what is needed to do it from what I've read.
ScreenRecycler...
http://www.screenrecycler.com/ScreenRecycler.html

2nd Request - PCI Memory Controller for ThinkPad T500 2081-CTO OS Vista 64bit

Similar Messages

Maybe you are looking for