2nd System Audio, Pluraleyes Replace Audio

I'm coming from Final Cut Pro using Pluraleyes where it conveniently creates Merged Clips (DSLR video merged with the 2nd system audio) automatically in the bin. It does not do this in PP. I can, however, drag the clips from the "Replaced" timeline it creates into the bin. I CAN'T however drag multiple replaced audio clips to the bins in the project window. Anyone know how to accomplish this in a more efficient fashion than dragging clip by clip?
Or, does anyone have any other suggested workflows? I don't want to work dragging clips from timeline to timeline when I edit, would much rather keep organized in the browser/bin.
Cheers
MM

If you skip PluralEyes, 5.5 can now create Merged Clips on it's own. They automatically appear in the bin for you.
http://tv.adobe.com/watch/cs-55-production-premium-feature-tour-/a-smoother-editing-workfl ow-with-dualsystem-sound-support-in-adobe-premiere-pro-cs55/

Similar Messages

Second System Audio

Okay, so I edited my movie using the camera audio. But we actually shot second system audio along with the camera audio (ran the mic to both the camera and a hard drive audio recorder). The video is locked. No more video editing. Unfortunately, I didn't have the second system audio in my hands before video editing needed to get started.
So, does anyone know of some simplified, not horribly time-consuming, method for replacing the camera audio with the second system audio? And, of course, keeping it in sync.

FYI, it wasn't as difficult as I thought it would be or people made it sound. Whole process took me 3 hours and a chunk of that was spent trying to figure out which track was from the second system audio vs the camera audio. Once the clips were merged, there wasn't really a way to tell just by looking at them. Another chunk was spent putting in some room tone and tweaking things.
I just merged the audio to the video. Put it in a garbage sequence. Set my in and out points to match the original edit. Copied over the new audio track to where the old had been. Boom. Done. FCP even knew if I messed it up and the new audio was out of sync with the video and displayed the + or - # of frames.
As for bad planning, it wasn't. The camera doesn't do time code. Period. There was no option to have any and it wasn't needed. The only thing I suppose we could have planned better was not having our audio guy suddenly having to go to the mideast for 3 months. Then we would've merged the audio and video up front. Probably would've been zero time savings when you consider that you'd merge takes you wouldn't ultimately use.
Just thought I'd put it out there for anyone else who may need to know.

10.6.2, iShowU 1.75, Soundflower 1.5.1 are not compatible - no system audio

Ever since upgrading to 10.6.2, the system audio features of ishowu no longer function. soundflower works properly but it seems that 10.6.2 does not let other applications switch/utilize soundflower in their apps. I was on a troubleshooting call with ishowu personnel and the problem was narrowed down to the Snow Leopard. All worked well in Leopard and Tiger but now problems. Apple is really going downhill with the launch with many issues.

Thanks. I had tried that previously and its not a soundflower problem. It seems that the new version of Snow Leopard does not provide the switch to allow 3rd party software to communicate with the sound system preferences. This was not a problem with earlier versions of Mac OS and seems to be a bug that was introduced with Snow Leopard. Mac will only survive if it moves forward with max compatibility with 3rd party software producers.

Entire System Audio mutes randomly while working in Premiere

Hi everyone
Just recently switched over to Premiere Pro CS6 at my office. I'm an editor for a web video production company and so far I've been having quite a few problems with Premiere.
The biggest issue is that randomly, maybe 10 times a day, the audio for my entire system will drop out while editing in Premiere. At first I was resorting to doing full restarts of my computer and the problem would fix itself, but now I've discovered that if I go into "Activity Monitor," search for "coreaudiod" and then force restart that activity, the audio will reset itself for the system, but not Premiere. I still have to then restart premiere to get the audio working again in my project.
I've seen other people mention similar issues but I have yet to find a solution. Can anyone help? Thanks so much.
Here are my computer specs:
iMac
27-inch, Mid 2011
Processor 3.1 GHz Intel Core i5
Memory 8 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6970M 1024 MB
Software Mac OS X Lion 10.7.5 (11G63b)
Adobe Premiere Pro CS6
v. 6.0.2

I've worked on two projects so far and it's happened both times. The first project was using ProRes source footage and then outside video assets were brought in that were H264.
Now I'm working on a project that is using Canon DSLR H.264 native footage and video assets that are in H264 and a few that are XDCAM EX.
Also using many still images but it seems as though it will happen randomly when I load a video clip into the Source window. The video clip will play with audio in the source monitor, but then when I bring it into the timeline this is when the entire system audio will drop out and mute entirely.

System Audio Capture - Won't Work

Hello all,
I'm trying to capture my system audio and I cannot get Cp8 to do just that. I'm running the most recent version of Cp8 on my MBP OS X 10.9.5. I open a new video demo, with system audio selected, with or without a mic. The mic will capture just fine, no system audio.
I have a request to capture some Skype interview and Tuesday, any help will be great!
Thank you in advance

Hi there,
Have you tried configuring 'Soundflower' audio driver? . Please refer to the below link for more information.
http://helpx.adobe.com/captivate/kb/system-audio-disabled.html
Thanks,
Nimmy Sukumaran.

Captivate 7 is not capturing system audio, and the software has a broken link

The Problem:
Captivate 7 is not capturing system audio. When I start a screen recording, the line with "System Audio" and its checkbox are eternally grayed out. Next to the grayed out words is a link that says, "Why is this disabled?"
The lnik goes to: http://www.adobe.com/go/cpaudio
Which is not a valid link, so Adobe's site redirects me to blogs.adoble.com/captivate which is ZERO help. Both browsing and the search bar bring no answers.
The Device:
Apple Macbook Air, Mid 2013, running OSX 10.9.2.
What I've done already:
Obvsiously I have set Captivate 7's preferences to capture system audio, and have set System Settings -> Security and Privacy -> Privacy -> Accessibility to allow Captivate to control my computer.
I have also tried clicking the Mic icon, Selecting Source with the System Audio icon and that doesn't record system audio either. It acts like it is recording system audio, but when I stop recording I get a popup that says, "Cannot record system audio. Ensure that you are playing audio on your computer [Okay]"

It's a wierd one.
One thing to try, and this fixes a lot of things, trash your preferences.
http://www.digitalrebellion.com/prefman/
DM

Non-Apple Keyboard: any way to control system audio volume?

I have a non-Apple Keyboard on my new Mini Lion 7.2.1
Is there any way to control system audio volume via the keyboard ?

Well. I can do this. But just because, on my Apple keyboard, there are the keys that do the job. There's a key to mute, and the keys to adjust low and high the sound. But keyboard shortcuts, I don't think exist. The aren't in keyboard shortcut in Keyboard panel, within System Preferences. The bottom line is that isn't a menu item in Finder for lower sound and higher sound. The only option would be an AppleScript that you save as an applet within Scripts menu (activated in Finder via Script Editor) and you invoke with a shortcut... Well, you can do it, if you open the script Set Output Volume in UI Elements Script folder within Scripts folder. Try it out!

Captivate 8 not picking up System Audio

Good morning,
My partner and I are both using Captivate 8. We are trying to use a Lync meeting to capture audio. It works fine on my computer but not on my partners. It seems all her settings are the same as mine. She used to be able to pick up the system audio but it has stopped working for some reason. I have had her re-boot twice. Anything else we should be checking?

Hi Lasers Edge,
It turned out that the problem was not actually in Captivate but in Lync. The Lync setting default was not using the Logitech Headset but something else that Captivate did not pick up as part of system audio. Had to click on the Speaker icon in my tray at the bottom of my window (application agnostic). Then click on Mixer. There are then choices for Speakers, System Audio, Lync, etc.... Only Speakers has a drop-down arrow. Select your headset instead of the HP or Realtech or what ever is there. This should fix the problem.
PS -- For us, why it was working for several weeks and then stopped turned out to be a Blue Jeans Conferencing upgrade. Each member of the team had the issue on different days over a two week span and it turned out to be the same day we updated Blue Jeans. Hope that helps.

Can you record system audio from a video??

I am trying to simply record a video but there is no options for recording system audio, therefore it will not recrod the sound. Is there anyway to do this?

Hello,
Welcome to Adobe Forums.
You have option of Audio Recording in Adobe Captivate while using Software Simulation or Video Demo (Captivate 6.0)
You can move the Microphone (For Audio Recording) closer to Computer's speaker.
Thanks,
Vikram

Recording System Audio in Captivate 6

I am running Captivate 6 on Windows 7, but i don't see the option of recording System Audio during capture. Please advise ...

This option only came in with Captivate 6.1 Subscription Edition. It's also in Cp7. If you do not have these versions you won't see it.

Hardware Requirement for Recording System Audio

Hi all. I want to record the system audio using Captivate,
but that function in my PC is disabled. I read all previous topic
regarding this problem and wonder what's the minimum requirement
for sound card or any related hardware to accomplish that need?
Thanks!

Welcome to our community, LyreLu
There used to be an issue with RealTek hardware, but the
developers addressed that with a patch for Captivate 2. Captivate 3
shouldn't need anything special to work with that hardware.
As for system audio, it is my understanding that this issue
is one created by the hardware. You have a couple of options.
1. Obtain a small patch cable and connect it from the Speaker
out to the Mic or Line in line. Then record audio as it plays.
(I've done this with reasonably decent results)
2. Use software that overcomes the issue. One such product is
called FreeCorder. You may visit the download page using the link
below.
Click here to visit
the site
Cheers... Rick

Adobe Captivate Help | System audio (for subscription and Adobe Software Assurance customers only)

This question was posted in response to the following article: http://helpx.adobe.com/captivate/using/system-audio.html

I have just a "regular" copy of Captivate CS6 Mac version running OS 10.7.5 bought the box so it isn't a subscription. I'm trying to record a video that has an audio track with it I tried using "record new software simulation" as shown by by Dr. Allen Partridge above. In this video he has an option in his audio preferences that I do not have, namely the check box "system audio". Is this wonderful option ONLY for subscriptions or ASA's? If so WHY? If not what do I need to do in order to record the video WITH the audio?

Use system-wide Text replacement to superscript characters? 1st, 2nd, etc

I wanted to use the new text substitution in Snow Leopard to transform typed "1st" and "2nd's" into their 'correct' form with superscripted numerical suffixes. I tried to just easy do it by copying a corrected form out of Pages where I had created a proper "1st,", "2nd," and so on, but when I would paste them into the system prefs pane, they would just paste as regular numerals & letters instead of the superscripted variety.
I then thought to see if I could find the proper superscripted letters in the character viewer but came up empty. Does anyone know of a way to get this working? it's minor and all, but would be a nice addition.

1) yes, I know that
2) how would that help this situation any even if I hadn't? i didn't say "I can't get my text replacements to be accepted in any applications," I stated that I cannot find a way to get the Text System Prefs pane to accept supercripted numerical suffixes.
Sorry to be an *** about it, but everyone's always lambasting posters for not being clear enough or specific enough in what they're trying to do, and I was very clear about what I was asking and even in giving specifics on what i had done to try and remedy the situation myself.
I'm not asking how to get text replacement to work in apps, I'm asking how to get the system-wide text replacement to accept superscripted numerical suffixes in the first place. Maybe it's not possible? maybe it is and I'm missing something, but if so it's specific to the prefs pane, not other applications.

Premiere CC render causes system audio to fail/skip/choppy

Hello,
When I link media, render, or import media into Premiere CC 2014 my system audio (iTunes and Google Play) immediately artifacts and is choppy, skips, and sometimes becomes muted for a few seconds.
Again, it only occurs when I'm processing media after it was offline or when I'm rendering a sequence.
Anyone else have this issue?
System Specs:
Apple iMac 27" (Late 2013)
3.5GHz Intel Core i7
32 GB 1600 MHz DDR3
NVIDIA GeForce GTX 780M 4096 MB
3 TB Fusion Drive (Local)
18TB Promise Pegasus R6 RAID (External 1)
8TB Gtech RAID (External 2)
OSX 10.9.4 (13E28)
Software Specs:
Adobe Premiere Pro CC 2014.0.1
8.0.1 (21) Build

Yes I considered your "solution" of just upgrading to Adobe CC but on principal I don't want to have to shell out more money to "fix" the problem. I was able to get an Adobe technician to view my screen in real time. He asked me where Prem Pro was after I opened it and my response was "precisely". The only evidence that Prem Pro is open is that there is the taskbar there with what appears to be fully functional drop down tabs but as far as the panels/workspace goes non-existent! He has "escalated" the matter I'll let you know what occurs next. I have tried using the software mode and there is no change. Like you I have wondered about a hardware proplem but I have checked via Disk Utility and there doesn't appear to be any? The CUDA issue well a) I am not sure how I would revert to previous drivers and b) when I re-installed Prem Pro from disc (that's version 6.0.0.) the only render option it gave me was Software only but that was also greyed out. Prem Pro still did not open up as it should!
I'll let you know what transpires.

System audio gets scrambled please help.

Hi,
I was rendering one sequence and exported using quicktime (no quicktime conversion settings), as I needed to add the chapter marker on it.
I exported it as reference file (Full file gave me problem with the fade out at the end of the video).
When playing it back on quicktime, I heard the audio produced delay and then started to get scrambled, like the end of Mr. Self Destruct from Nine Inch Nails. check on youtube to hear what i mean.
but my sequence exported from final cut was only composed by a stereo soft music and spoken stereo track.
I did lots of cuts on this footage works fairly well on the video side (ACVHD 1080p) but both spoken audio (still in mov) and aiff file need rendering. I did only one fade in fade out effects, music audio has -8 decibel.
Those are all the changes i did.
Scratches files are on usb external hard drive. big one. User Settings is AVCHD 30fps (29,97).
Audio is 48khz 24bit.
But among all the sequences (15) I exported just this one gave me problem. It is even one of the shortest ones.
Another problem is that when I play the sequence on Final Cut the audio stops at the same point all the time
(1 minute and 10), and also this time the whole system audio (itunes quicktime volume up and down) starts popping and mute completely until I reboot ! And then again when I play it from the timeline same problem,
although I do some modifications to re render the audio.
I uninstalled fcp and reinstalled it.
I trashed the preferences.
I removed audio hijack and the hijack.ape from input managers folder.
I reset the Pram.
I set all the settings for low/faster performance.
I closed all the application to free Ram.
I trashed all the render files on all locations (internal HD and external).
I moved out Audio and video Plugins, to make fcp light.
But no luck.
Please note that at the time of this problem happened, I wasn't installing nor changing anything,
As I was busy in exporting the whole 15 sequences from the same project. I joined some sequences but not this problematic one.
I am on a macbook aluminum 2.0 4 gb ram.
My External HD has 3 partions, 2 Mac and 1 Win Formatted.
Privileges are ok.
I looked throughout the forum but I couldn't see anything.
thanks in advance.

Thanks for the reply and tip. Can't remember what happened with fade out, I think simply didn't apply and it re looped the last frames.
I "solved" the problem by making a new sequence and partially remaking it from scratch.
Then i vaguely copied and pasted from old sequence as copying and paste the whole sequence content onto the new sequence didn't work either !
However this popping noise already happened to me before.
Then, when I was able to join all sequences on a sane quicktime mov, iDVD cut off the audio at one point, I re-exported the video_ts and again iDVD at the same point cut off the audio. I checked the quicktime mov tracks and everything was fine, I also started the iDVD project from scratch as when iDVD tells you that he can update the file for you, he then messes up all the time the Chapters as he simply can't handle this function (aka bug !). I mean it's been a nightmare, still is.
However this iDVD bug is another topic, I would like to keep this post open as it the initial problem has no official solution yet. Could be also useful to somebody else, and also, I am very curious what's the cause, and if it can be fixed properly and faster. If it could happen to me again I don't want to play with timeline.
Thanks again for your reply.

2nd System Audio, Pluraleyes Replace Audio

Similar Messages

Maybe you are looking for