2nd Time Capsule for redundant backup??

Currently use a 14 month old 1TB time capsule that's only about half full to do incremental backups for 2 MacBook laptops. I also use SuperDuper to create disk "clones" every month or so in case of drive failure.
I want a transparent / easy / painless backup (which I seem to have now), but am getting concerned about the Time Capsule problems I have been reading about. I know SuperDuper does incremental backups, but I like the version control that Time machine offers. I could lose a week's worth of data without too many problems, but more than that would cause quite a bit of grief to duplicate/reproduce.
I have been thinking about getting a 2nd Time Capsule, and swapping them out every week. My thought is, it would be easy to keep offsite at my office, adding another layer of protection. That after swapping out, the time machine backups would "catch up". It sounds ideal (though little expensive), but it would meet my "easy" criteria -- cables would be the same, so just unplug, plug back in and I'm done...
Big question -- will it work?
Additional questions: Same / different SSID/IP range? Problems with windows laptop, and WIFI printer?
Any input / suggestions / alternatives would be greatly appreciated!!!!

mike808ec wrote:
I know there are no guarantees in life, but I'm just trying to "hedge my bets". Is there a "verify" function available? Either as an option as part of the archive process, or a seperate run after the archive has finished.
Nothing built-in.
Alternatively is there a way to test the archive? You said i could attach the drive directly to my laptop. If I do this, and Time machine recognizes the archive does that mean it's "good", or could there be corrupted files within the archive?
You can browse them, even restore some things (probably to alternate locations), but that doesn't mean there isn't something corrupted there, somewhere.
You can also run +*Repair Disk+* (not permissions), to be sure the directory structure, etc., is good.
And, of course, a backup of a backup is only as good as the original backup; if something is wrong on your TC's hard drive (or your boot drive, for that matter), the copy on the archive will be, too.
I think this is my only hesitation to this solution. As I've said I've experienced bad / corrupted copies in the past when dealing with large file transfers. Shouldn't be a problem with a new drive, but as time goes by, and the archive grows and grows...
But you will continue the SuperDuper backups, too, right?

Similar Messages

  • Already have wireless network, need help for set up of time capsule for wired backup only.

    Hello all -
    I have a time capsule that plugs into wall and used a wireless network to back up computer.  It would always mess up internet afterwards so I would unplug the time capsule and reset internet until the next back up.  my time capsule now will not link into my computer. It just flashes amber.  Spoke with apple and was told to come on here and ask for help for setting up time capsule for a wired backup only and to mention that I have a wireless network.
    Hope any of this makes sense.
    Thank You!!

    Spoke with apple and was told to come on here and ask for help
    Really?  The paid professionals at Apple told you to post on a forum where users.....just like you....are trying to answer questions?  We'll try to help, though.
    For starters, please tell us the make and model of the modem/router that you have now that is providing your wireless network.

  • How to configure Time Capsule for Automatic Backup AND HARD DRIVE USE

    I tried to configure Time Capsule for back up and as a hard drive. I record music and need to copy the music myself onto an external hard drive for speed, so I want the TC to double as an external hard drive, and do the back up. I want to be able to open the TC as a hard drive, to open my songs from it. Can it do both?

    I finally figured it out. I am able to access my TC from the "shared folder." When I click on it, I get the "connection failed message." I failed to notice the login button in the upper right -- user error due to my Windows based education. The button is very subtle. Once I login, I can create folders and add content.
    I didn't see a partition option. Where is that? Just curious.
    Thanks!

  • How to setup Time Capsule for wireless backup only

    I have a new Time Capsule that I want to set up for wireless backups of both my Macbook Air (with Time Machine) and a Windows Vista laptop. I have an existing home wireless network with my Att/Uverse tv and internet service. I do not want to disturb that network/internet setup.
    How do I set up the time capsule to use it for wireless backup only? When I start the Airport utility setup, the first thing it asks is do I want to 1) set up new network, 2) replace existing router, or 3) join existing network.

    Thanks. That got me the green light and a message that everything was set up properly. It started it's first Time Machine backup and everything looked good for a while. But now I have a new problem.
    The backup failed twice. The first time it had a message that it could no longer find the time capsule, so I had to reset it and go thru the setup procedures again. Started backup again overnight, and this morning it tells me that it failed again. But this time I still have my green light, and the message is "a network problem may have interfered with the backup.
    I don't know what else to do with the setup to get it to work. Right now it has started backing up again on its own, so I'll leave it going one more time. (I should tell you that all of this is occurring on my Mac. I have not even started setting it up on the Vista machine. I want to make sure it works on the Mac first). Any advice from anyone who had the same problems with setup would be appreciated.

  • Use Time Capsule for local backup only

    Hi there,
    I think I can do what I need to but need some config assistance.  Here is my issue:
    I want to use a time capsule that is attached via ethernet cable to my MacBook Pro to backup via Time Machine but I do not  need the TC to be used for wireless access. 
    I have taken the 2TB TC to my office.  I have a full WiFi network there that I attach my Macbook to.  I have used the AirPort utility and told it to extend a wireless network for the TC.  I have given it the credentials for our office network.  It seems to be attached (DHCP address assigned) but the TC light keeps flashing yellow.
    I see the TC in Time Machine on my MacBook and it is doing an incremental backup (it's been about 2 weeks since the last one so it's big!).  However, it seems to be backing up over the office WiFi network and not the locally attached ethernet cable. 
    So do I need to just disable WiFi altogether on the TC?  If I do, it doesn't seem to make the Time Machine volume available to the my Mac.  When I go into my Mac's Network Preferences now,  and look at the physical ethernet port, it says "self assigned IP address" so I don't think the ethernet cable plugged into the TC is actually doing anything. 
    Can someone tell me how to correctly set the TC up to locally backup my MacBook through the Ethernet cable but let my MacBook use the company WiFi network for other network activities?  Thanks much in advance for the help!

    If your office network is created by non-apple routers, then the TC is working in join wireless mode and will turn off the ethernet ports.. in other words you have no connection at all by ethernet and it is irrelevant.
    To get this working you will need a pretty snazzy setup..
    So first and really important question.. since you are prepared to have something plugged into your MBP.. why not use a USB drive. It is much faster.. even USB2.. and if newer model with USB3 it will completely flatten any network drive. It is much more reliable.. Time Machine operates differently to local drives. And you can also use a program like CCC and create a bootable clone. This is on top of TM backup and well worth it.. A bootable clone will enable your computer to start even with a dead hard disk in a couple of minutes.. not days of sorting through TM.
    Anyhow.. To get TM to work to the TC in isolation
    1. Factory reset the TC.
    2. Do minimal setup of the TC.. it must stay in router mode but simply ignore errors of no internet connection.
    3. Here we get to the tricky bit. Open the network preferences and check the IP you get from the wireless office system.
    If it is 192.168.x.x for example all will be great. If you get 10.0.x.x or indeed any 10.x address tell me.
    The TC will have an IP 10.0.1.1 and will pass the computer 10.0.1.2
    What you need to do now is set that statically and change the gateway (router in applespeak) and DNS values.. In most computers you can leave them blank but I found the apple computers prefer you to fill them in so you should copy the values from the wireless connection.
    There is a longer discussion of it here.
    Can Time Capsule be set up as a second, local network?
    This is fairly old but the principles are the same albeit the utility is v5.
    If you cannot figure it out post back and I will figure out a v6 set of screenshots.
    What I will need to know is the values your wireless gets.. IP, subnet, router, and dns.

  • Backing up macbook pro to time capsule for first time via ethernet

    I set up a new 2T Time Capsule / Airport, let it run overnight, only about half way backed up.  I deleted first backup file, and want to do the backup via ethernet.  How do I do this?

    ....and want to do the backup via ethernet.  How do I do this?
    This will depend on how you have the Time Capsule connected to your network.
    If you have it connected from your modem or modem/router using an Ethernet cable at the present time, you are already set. Just connect another spare Ethernet cable from one of the LAN <-> ports on the Time Capsule to your Mac....and be sure to turn off the wireless on the Mac before you start the backup.
    Normally, about 25-30 GB of data will transfer per hour this way, so if your Mac has say, 60 GB of data loaded, the backup should take approximately 2-3 hours. Once the backup is complete, disconnect the Ethernet cable and turn the wireless back on at the Mac.
    However, if you have the TIme Capsule configured to connect to your network using wireless only, then the Ethernet ports are not enabled on the Time Capsule in this type of setup.  It is not possible to backup using an Ethernet connection unless you are willing to reconfigure the Time Capsule for the backup...and then reconfigure it again to get it back to its current setup.

  • Using airport extreme, an external HD and time machine for wireless backups

    Hey All,
    The whole reason I bought my airport extreme was to plug an external HD into and use it for backups. Then came time machine and Leopard, and now time capsule!!!
    Does anyone know if you can use your airport extreme with an external HD attached and time machine in the same way as time capsule for wireless backups!??? The guy in the Apple store I spoke to says you should be able to if you mount the HD (a little cumbersome); I used to be able to mount the HD in Tiger, but cant in Leopard!!
    Thanks!
    Message was edited by: Fleery

    Fleery wrote:
    Does anyone know if you can use your airport extreme with an external HD attached and time machine in the same way as time capsule for wireless backups!???
    No. Time Machine is supported in 3 configurations:
    1. a directly attached HD
    2. Time Capsule
    3. A HD connected to a Mac with OS X 1.5 Server
    I tried both 1 & 3 and they work perfectly.
    The guy in the Apple store I spoke to says you should be able to if you mount the HD (a little cumbersome); I used to be able to mount the HD in Tiger, but cant in Leopard!!
    Bogus. That is NOT a supported configuration. It will work for a while and you will eventually start to get errors when Time machine backs up, and they are not recoverable.

  • Cannot select Time Capsule as my backup drive

    I just purchased Time Capsule 802.11N Wi-Fi Hard Drive 1TB, and I want to use it exclusively as a wireless backup drive and not as a Router. I connected the time capsule power cord and have a yellow light on the time capsule. I then went to system preferences and selected Time machine. Once in time machine I slid the button from off to on and the only option that I have is Bootcamp and underneat it says "reformat required(incompatible filesystem). Can someone tell me why time capsule is not indicated as a possible selection?

    rider93 wrote:
    I just purchased Time Capsule 802.11N Wi-Fi Hard Drive 1TB, and I want to use it exclusively as a wireless backup drive and not as a Router. I connected the time capsule power cord and have a yellow light on the time capsule. I then went to system preferences and selected Time machine.
    You can't use the Time Capsule for wireless backups unless you can integrate it into your LAN, which will require configuring it.  Depending on what brand/model of router you're using, that may or may not be easy.  Start by setting "Wireless Mode" (in AirPort Utility's AirPort panel, Wireless tab) to "Join a wireless network".  If you can't get AIrPort Utility to see the Time Capsule, try connecting to it with an Ethernet cable.

  • Can I use the Time Capsule as a backup drive and wired network switch? I do not want to use the wireless part as I already have an ADSL 2  Wireless Router for that. Thanks.

    Hi
    I just went from PC to MAC. Have a MAC Mini and wanted to get a time capsule for backups. I would like to use it as a wired device instead of wireless. Would me connecting it to my router do the trick? Can I then use the LAN ports in the back of the capsule like I would a network switch? Can I just disable the wireless router part of the capsule as I already have an ADSL2+ Wireless Router.
    Thanks

    I wanted to run a cable upstairs from the switch downstairs so the Time capsule becomes my upstairs switch (as I only have Wireless upstairs at the moment. That will work right?
    Cheers.
    Yes, that is also fine.. ethernet being the cable you run.. !!
    You still don't have to use a TC.. which is still a rather expensive box for the job.. an Airport Extreme would offer the same exactly minus hard disk for cheaper price and more than likely better lifespan.. TC with internal power supply run too hot.

  • Possible to simultaneously use time capsule for backup + another router for internet?

    I will soon be moving into an apartment in which my landlord provides wireless internet through her own router.
    I also have my own Time Capsule, which I'd like to continue to use to back up my Mac via Time Machine.
    Is it possible to connect to both my Time Capsule (for backup only) and another router (for internet only) at the same time?
    If not, can anyone suggest a good workaround?

    moskovit wrote:
    I've done a little research, and it looks like I might be able to wirelessly daisy chain the two routers, using WDS (wireless distribution system), assuming my landlord's router supports it, but that this would drop the speed of the internet significantly: https://discussions.apple.com/thread/2623802?start=0&tstart=0
    It works extremely poorly and the landlord would need to agree to it.. plus it would require use of WEP security which is hackable by children with internet hack kits in about 2min flat. Don't go there. Apple have made their products incompatible with most other routers. So any suggestion of a workaround will involve spending some money on your part.
    You could buy a airport express and plug that into the main router by ethernet.. again if allowed. Your TC can do wireless bridge to another apple product very well. Messy but could work. It is not that expensive to get a second hand AEBS and use that. You don't need the latest products but wireless range would be better in the AEBS than AE.
    So I'm still wondering: Is there another workaround?  Is there a way to get my mac to connect to my time capsule (for backup) and another router (for internet) simultaneously, or is that just technologically impossible?  If it's impossible, is there another solution?
    You cannot wirelessly connect to two different wireless devices at once on one client. You need to either have a second wireless client in the laptop.. for instance a USB stick which can be fairly tiny nowadays. It is just you need to find one with Mac drivers. Or the TC must have internet connectivity. You could get that by buying a wireless bridge, and using that in your room, with the TC plugged into it. Universal wireless bridge devices are fairly cheap, but can be a pain to setup. Look for products that work with the main router and use as fast a speed as possible. It can be a tricky setup as you need the wireless bridge working on one channel and the TC working on another. What I am suggesting is the WDS solution you found but using two different boxes to do it. And not using WDS at all, unless the main router is suitable, but rather universal bridge.
    The hassle of all that suggests to me,, I would go for the wireless stick, so your Mac laptop has two wireless clients.
    http://www.ebay.com.au/itm/iMAC-MAC-Apple-Airport-G3-G4-G5-OS-X-USB-WIRELESS-CAR D-/290538112833?pt=LH_DefaultDomain_0&hash=item43a56bc741
    I have no idea if this works just to show you what I mean. Please do research it yourself.
    An ethernet connection to the TC is far superior solution albeit would require you to plug and unplug it.

  • Using a Time Capsule for Time Machine backups and as a data drive

    Hi There....can I use my Apple Time Capsule for my Time Machine backups and as a drive I can put data on?

    Yes, you can use your time capsule as a drive for data.  If you create a disk image, you reserve a certain amount of space for that image. Time Machine will respect that space and leave the disk image alone even if there is a large amount of unused space on the image.
    If you create a folder, it starts with zero space until you add data to it. The folder can be as large as you would like as long as the space is available on the TC.
    So, each has an advantage. The disk image will reserve the space until you fill it up and the folder will not. But, the folder can be as large as you would like as long as the TC has space available.
    Your next question might be can you change the size of a disk image after it has been created? I haven't tried this, but think you probably could.
    For most users, I think the folder concept is probably simpler for them to use and easier to understand. But more advanced users may favor the disk image concept if they feel that space will be at a premium on the disk.

  • I used an ethernet cable between my iMac and Time Capsule for the initial backup.  Now that initial backup is concluded, can I simply unplug the Time Capsule from my computer?

    I used an ethernet cable between my iMac and Time Capsule for the initial backup.  Now that initial backup is concluded, can I assume I can simply unplug the Time Capsule from my computer without any glitches and Time Capsule will then run wirelessly.  Is this assumption correct? 

    can I assume I can simply unplug the Time Capsule from my computer without any glitches and Time Capsule will then run wirelessly.  Is this assumption correct?
    Yes, if the computer will be able to receive a strong wireless signal from the Time Capsule.
    I did not disable wireless.  So I assume the backups are occurring both with the ethernet and wirelessly.
    It is inot possible to have both an "active" Ethernet and "active" wireless signal simultaneously. If an Ethernet connection is established, your computer will default to the Ethernet connection. If the Ethernet cable is unplugged, the computer will revert to the wireless connection.
    I also show 2 wireless networks available through Airport.  Shouldn't there only be one now?
    You have a simultaneous dual band Time Capsule. That means that it will always be providing both a 2.4 GHz and a 5 GHz network.
    I named my new network the same name as the old network.  This enabled all of our devices to continue with their connection without entering the new network and/or passwords; however, I am afraid this may pose problems in the future somehow.  Any input on this issue as well?
    Things should be fine. Devices will connect to the best signal.....either 2.4 GHz or 5 GHz....based on their capabilties and location in relation to the Time Capsule.

  • Use time capsule for backup for HP Windows computer?

    How can I use Time Capsule for backup on a HP Windwos computer?

    Apple does not offer Windows backup software.
    A popular PC application used to backup a PC on the Time Capsule is Genie Timeline Pro. You might want to take a look:
    Genie Timeline Pro | Overview | Time Machine Backup Software for ...

  • I want to install a new Time Capsule for backups. I also have a B box2 from Belgacom for the digital TV, so how do I install?

    Hi,
    I want to install a new Time Capsule for backups. I also have a B box2 from Belgacom for the digital TV, so how do I install?

    Just setup the TC in bridge.
    Assuming you are using Lion.. download the airport utility that has some utility.
    http://support.apple.com/kb/DL1482
    Then manual setup, internet tab, connection sharing.. off bridge mode.
    Then plug the TC into the Bbox and just use it as wireless target for your air.
    You can use wireless on Bbox if that works as well, and you might need to juggle wireless channels to get everything working. Having both set to auto is not a good idea.. set and lock channels on one or the other but best is both.. On the TC go to the airport wireless page. change it to manual.. lock the channel. You can use 1, 6, 11 or 13 in ETSI..

  • Can you use time capsule for your mac and have readynas backup your pc's on the same network

    Can you use time capsule for your mac and use readynas to back up your pc's on the same network

    Sure, that is trivial setup.. they both have different names and IP addresses.
    You should be able to use ReadyNas for TM backup but you should check the latest state of play for that.

Maybe you are looking for