2nd user can't access internet

I set up a 2nd user account on my Mac and I can't access the internet from it. I've checked my Network settings and it says everything is working normal.

These were written for Yosemite, but apply to 10.6 also.
Internet – can’t connect - Yosemite
Internet – can’t connect - Yosemite (2)

Similar Messages

ASA 5505 Anyconnect VPN Users can't access Internet

Vpn user cannot access the internet but able to ping the lan network (192.168.1.0).. it seem like im missing a lan or nat rule.. Possibly allowing the vpn subnet 192.168.2.0 /24 to pass through to the internet. Im looking to accomplish this without split tunneling.. Thanks

on 8.2.5 version or lower: Let say your inside hosts are accessing Internet by using dynamic nat index "1" and now you can use the same nat index "1" allow your vpn-pool range to be part of the same dynamic-nat index "1" to access the Internet. Note I am natting source interface is be outside for vpn-client users because they (vpn-users) are physically coming off the outside interface.
nat (outside) 1 192.168.2.0 255.255.255.0
on 8.3 version or greater:
object network vpn-user-subnet
subnet 192.168.2.0 255.255.255.0
nat (outside,outside) dynamic interface
Hope this helps.
Thanks
Rizwan Rafeek

My default user can't access internet

when I tried to use the internet from my default user account, it refused to connect, but my secondary user has no issues. how do i fix my default account?

These were written for Yosemite, but apply to 10.6 also.
Internet – can’t connect - Yosemite
Internet – can’t connect - Yosemite (2)

New Ipod Touch 5g can't access Internet in home network (using Linksys E4200 router). But, OK with other Wifi.

Just bought new Ipod Touch 5g. I found out it can't access Internet in home network. not really cannot access, but very slow to open any web page, App Store failed to access, etc. But, OK with other Wifi (office & starbucks). Others existing iOS devices (Iphone4 & Ipad2) have no problem like this. I'm using Linksys E4200 router at home. anyone has any idea why?

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

IPhone 5s can connect to wireless WIFI router but can not access internet.

iPhone 5s can connect to wireless WIFI router but can not access internet at work. The admin says the router lets my iPhone connect to LAN, but the iPhone does not have server IP to access the internet. I entered the server IP and port number in the HTTP PROXY fields but I still can not access the web. Any ideas?
TIA
Rich

You IT person should be able to sort this out. But, they seems to be too busy or disinterested to do this. Suggest you provide the it person with an iPhone to get interested.
Any could be lots of things.
The best you can do is to get access to the admin setup for networking on a pc? The internet settings are all the same. Only what names the manufactures change from OS to OS. Check and compare parameters.
Phone works to internet at home, I assume?

Other user can't access to OBIEE 11G installed on a server

Hello,
We have installed OBIEE 11G on a server ( windows sever 2008 r2) with admin account, and it works fine, But others users can't access to obiee 11g ( administration icons are white in their sessions) even they have admin rights.
Can anyone tell me what should we do??
Thank you.

Hi,
This is the exact format how my tnsnames.ora file looks. sorry, I can ping it in command prompt now. In my connection pool i tried first DSN = ab.bc.xy.zx, did not work. Then I saw oracle's default repository and changed my DSN to your suggested format starting from "DESCRPTION" to rest. Still no luck Do you think, i should put the same TNS in my local machine??
ab.bc.xy.zx =
(DESCRIPTION =
    #(ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.110)(PORT = 1521))
    #(ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.120)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.130)(PORT = 1521))
    (LOAD_BALANCE = yes)
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SID = cap2)
thanks,
BK.

Saving so that windows user can have access?

I have my project all ready and those with quick time...loads up perfectly. However those who have windows have a long wait or pile will not come up. Do you know how i can save my final cut express project so that window users can have access to it?

thank you. one last question....the quick time movie file can not be seen when opening on a windows. do you know if i need a quick time pro so that i can convert it? or is there a way that i don't know about?

Can not access internet via wired connection, wireless working OK

Background information,Came home from vacation turned on PC to access email.Emails started downloading then stoped,started getting messages that firefox stopped working and Thunderbird quit working and others.My desktop is attached to a verizon router.all my other devices are wireless and are working fine through the same router.I connected my laptop to the lan connection, turned off wifi and accessed the internet via lan connection.Using device manager, checked drivers, says up to date, also says that it is working properly.I have gone to the command line and can ping google.com.I can ping the loop around. ping127.0.0.1I have done the ipconfig/release,ipconfig/renew, and ipconfig/flushdnsipconfig/all indcates that it is there and enabledMy Lan connection is part of the mother board.can not access internet via wiredconnection.Not sure what to do next.Help Please

Reply: I spent about an hour last night doing all the things that you suggested including moving the lan cable from my desktop to my laptop which worked fine. When I hoover over the connection it says; Network3 Internet Access no error messages.When I unplug the cable at the router a red x covers that connection icon.Plug it back in red x goes away.It is seeing the router, just does not appear to be providing selected web page info.Computer thinks it is working fine.

Why the apple store is so expensive and why the apple users can't access for free after spending huge amount in apple phone ?

Why the apple store is so expensive and why the apple users can't access for free after spending huge amount in apple phone ?

The Apple store is correct. The warranty is not international, and Apple will not accept or return iPhones shipped from a different country. You need to ship the phone to somebody in Hong Kong who can take it in to Apple for repair, or pay a third party repair shop in the Philippines to fix it.

I installed a new airport express and made it part of my existing home network... now the PCs can't access internet through the airport extreme or the cisco access points

Everything works perfect with Macs, iPhone, iPads but I have 2 pcs that now can't access internet. The PCs connect to the airport and my other access points but no internet- The PCs sent an error of DNS

Yes, as we already said, it will do all of this if you have a good wireless signal reaching the bedroom.
Remember that an extender or repeater or whatever you want to call it can only extend the quality of signal that it receives.
The Ethernet signal that the Express delivers will only be as good as the quality of the wireless connection between the AirPort Extreme and AirPort Express.
If you have doubts, make sure that you understand the store's return policy before you buy.

Can i access internet from my PC to my blackberry using bluetooth?

Hi,
Since 8100 doesn't have wifi can we access internet using my PC bluetooth?
Thanks

Nope, sorry.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Trying to activate newly installed Acrobat 11 but can't access internet thru program - can otherwise get online with no probs

trying to activate newly installed Acrobat 11 but can't access internet thru program - can otherwise get online with no probs. any suggestions?

Hey Marina Hannwacker,
I would recommend you to Refer this link - Offline Activation and let me know if it works for you.
Regards,
Rahul Tyagi

User Account Can't access internet once parental controls used, even after turning off parental controls

I set up a user account for my child. I am able to access the internet through firefox. I then set up parental controls and can NOT access the internet anymore. I turn off parental controls for that user account. I still can not access the internet from that account.

Parental controls is a part of the Windows operating system and not Firefox. You can get help here: http://support.microsoft.com/ask-community/windows/

Can't access personal email and therefore can't access internet on 8703e

Hi there, I am having a very large problem, and it will take a while to explain. I spent most of yesterday trying to fix it, but all to no avail. Ok, so I bought a used 8703e BlackBerry on eBay, simply because Verizon is getting rid of their unlimited data plan on July 7 but will grandfather in those who have the plan before that date. Since I only had a regular phone, I needed a smartphone that was capable of having the plan so I could lock in. Unfortunately, I don't upgrade until August, and it would be stupid to buy a real phone before then. Hence, the BlackBerry. Now I activated it ok, and the calls and text messaging work. However, I only have the option to add an Enterprise email account under the setup wizard. I do not have an email setup or email settings icon like everyone says I should. Therefore, I cannot access my service books, and cannot sign the user agreement, and cannot get online. I saw online that this problem might be because it had an IT policy on it. Also, when I called Verizon, they said this was probably the problem. So I went through the steps listed - I upgraded my OS to the beta 4.5, I used the jl_Cmnder, I tried the policy.bin thing. In a way, these actions were successful - they eliminated the firewall that had previously been enabled. But it hasn't changed anything else. I saw that there was an option to create a Blackberry account online so that I could send myself the service books, and I thought that might work now that I disabled the firewall. However, for some stupid reason Verizon won't let you create an account online; it has to be done through the wireless device, which I can't do because I can't access the internet because I can't set up email and agree to the user terms. Ahh! In addition, I have done the Advanced Options - RHT - Register Now thing many times, and it doesn't seem to do anything. I just really need help. Is there a way to manually load the option for personal email on to the device? I think that if I could do that, then I could receive the service books, and all would be well. Thank you for taking the time to read this word vomit, and I anxiously look forward to your response!

Hi and Welcome to the Forums!
There is no manual way to add the Personal email configuration to a BB. That is 100% pushed by the carrier, when the proper data plan is enabled. But, if the carrier does not natively support that model BB, they most often will not push the SBs. You would have to do some very tedious things to acquire and install the SBs. Using a non-native BB on a carrier network that does not support it natively is very tricky indeed. I suggest you first obtain a commitment from VZW that they will allow your specific device on their network. Next, see if they support it natively; if they do, then go back to them for formal support...you are paying them for this service and they are not delivering it. If they don't natively support your model, then you will have a lot of tedious work to do in order to get it all working.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

User can't access a PDF with Forms

On a website, we have a main menu PDF with a list of bookmarks linking to individual user manual PDFs. When a user tries to access a user manual PDF with forms in it, they get the error "There was an error processing a page. There was a problem reading this document (118)." The user dosen't appear to have any problem opening a PDF that doesn't contain forms.
The user is using Reader 10.1.3 and Internet Explorer 8.0.6001.19328. This user cannot access the PDFs with forms when given a direct link to the file either. However, if the user is sent the PDF file they can open it with Reader and in their browser. I'm stumped. Does any body know what's going on here?

Is there a browser setting that can affect if a PDF opens? Something in security, perhaps? I've looked around and don't see anything obvious that could allow/disallow opening a PDF file that contains form fields.
Jeanie

2nd user can't access internet

Similar Messages

Maybe you are looking for