2ndary display adapter not showing up

I am trying to get 2 monitors simulataneously, using the internal VGA bult into the motherboard as primary, using the 15 pin connector to an lcd screen, and an nvidia-vanta-tnt2 agp card as the secondary adapter to a 19" analog monitor. By modifying the init-adapter in the bios, I can get either one to work alone, but I cannot get winXP to recognize both adapters at once. There are no cards in the computer aside from the AGP card. Anyone have any suggestions??

You can't do it. The only way to do that is if you have a radeon 9100 IGP chipset and a radeon card. That's th e only way you can do that. Onboard video and video cards will not mix.

Similar Messages

HT4044 Part of my iPad(1st gen) screen display does not show,hence I can only see it partially.It was not dropped and neither is it broken. Any help as I was told it cant be fixed and i hv 2 replace with a new unit i.e. pay in full as warranty is over? HE

Part of my iPad screen display does not show. It was not dropped and neither is the screen broken. I was advised to see the local service provider for a diagnosis.
I had finally managed to find time to find a local service provider last week (not easy) and was disappointed to be advised of Apple's policy of one for one exchange i.e. they wont repair and said that i would have to replace with a whole unit. As my unit is no longer under warranty, it meant that I had to pay for the full price of a new unit!
I might as well have paid for the latest new unit but since my unit is only 2 years old at most, it would be a great waste of money.
How can this be? Does this mean apple's product is inferior and do not last since warranty is only for one year?
I sincerely hope there is a favourable solution otherwse my money is flushed down the drain.
HELP!!!

I was using my iPad last night, shut the power off and when I turned it on this morning 2/3 of the screen is not working. It looks like the pandalela picture. What is the answer to fix this; is this a screen issue or and electronics issues. Has anybody else experienced this?

Sender File Adapter Not Showing in Decentral Adapter Engine

Hi,
We have recently implemented a Decentral Adapter Engine on a windows box. The adapter engine seems to be working fine because my adapters show and seem to work fine in it.
However, when I define a Sender File Adapter that uses File Content Conversion message protocol instead of just File messaeg protocol, the adapter does not show up in the decentral adapter engine.
I made sure that Adapter Engine parameter in the Sender File Adapter shows the new adapter engine but that does not seem to be working. If change the Adapter Enginer parameter to show the Central Adapter Engine, then I can see the Sender File Adapter on the Central Adapter engine and it works fine. (Note: The Central Adapter Engine is installed on a Unix box)
Here are the paramters I defined for the Sender File Adapter:
- Transport Protocol: File System (NFS)
- Message Protocol: File Content Conversion
- Adapter Engine: (new Adapter Name)
Source Directory: (
server/drive/path)
File Name: purchaseOrder.txt
Quality of Service: Exactly Once
Poll Interval (secs): 60000
Poll Interval (msecs):
Retry Interval (secs):
Processing Mode: Archive
Add Time Stamp (checked)
Archive Direcotry: (
server/drive/path/archive)
Process Read-Only files: (not checked)
Processing Sequence: By Name
Fiel Type: Text
File Encoding:
Operating System Command:
Additional Files (not checked)
Content Conversion Parameters
Document Name: MT_Request_File_Data
Document Namespace: http://nxy.tots/fg_admin
Document Offset:
RecordSet Name: Purchasing
RecordSet Namespace:
RecordSet Structure: Purchase_Record,*
RecordSet Sequence: Ascending
RecordSets per Message: 1
Key Field Name:
Key Field Type: String(Case-Insensitive)
Purchase_Record.fieldFixedLengths: 8,4,2,10,10,12,18,12
Purchase_Record.fieldFixedType: char
Purchase_Record.fieldNames: Request_Action,Request_PO_Num,Request_PO_LN,Request_PO_Date,Request_Purchasing_Org,Request_Purchasing_GName,Request_Created_By,Request_Vendor_Name
Purchase_Record.fileContentFormatting: trim
Adapter Status: Active
Advanced Mode: (not checked)
Your help is much appreciated.

Hi Alaa,
look into this document:
http://service.sap.com/nw-howtoguides -> Exchange Infrastructure -> Troubleshooting: Adapter Engine 3.0 (Expert Call slides)
If the File Adapter works without conversion, then you should count the number of fields in a row. If it differs from the configuration, then it runs on error.
Another idea is to check the content type of the file. When you do not enter a File Encoding, then the file adapter assumes utf-8. If the file is for example latin-1, then the number of characters in a row are not counted correctly.
Regards
Stefan

Is there a way to give permission to access iPhone 5C when you can't through the display? Display is not showing but iPhone 5C is recognized in iTunes through USB.

So display on phone does not show anymore; however, when I plug it into the USB the phone is recognized by iTunes and triggers the permission pop up to access. The only problem is I can't click "Trust" on the iPhone because I don't have a screen that shows it. I can even reset the phone by holding the power and home button. So basically it's give permission with no screen. I have a replacement phone on the way but unfortunately the back up for this phone was deleted during a PC refresh so no backup and that's why I need access to it. Any suggestions would be very helpful.

There is no way to interact with the phone if the screen is not working.
Did you happen to have iCloud backup enabled? If so, you'll be able to restore from an iCloud backup and get at least some of your data back.
~Lyssa

Decentral Adapter not showing up in RWB

I have just installed a J2ee Decentral Adapter instance, configured the exchange profile to connect back to the main PI instance and connected it to the SLD (both the J2ee Decentral Adapter and main PI instance use the same SLD).
One of the last steps is to check see if the Decentral Adapter shows up in the PI Instances Runtime Work Bench (RWB), but it does not.
I've noticed that on the SLD, the J2ee Decentral Adapter shows up as a Technical System, but when going to the SLD > Administration > Content Maintenance > All Instances > Class: XI Adapter Framework, that only my main PI instances show up, not the recently installed J2ee Decentral Adapter.
Anybody have any ideas of what else to check ?
Thanks..SB

Aaron,
1.1 SAP XI AF CPA Cache are set at the defaults of the install. The SLDAccess is set to true which according to the following SAP Help doc says that the entris are ignored: http://help.sap.com/saphelp_nw04s/helpdata/en/29/22ee41c334c717e10000000a155106/frameset.htm
1.2 SLD DATA Supplier is set correctly. I can do a CIM Test and trigger the data upload successfully. Still no entry under the Content Maintenance though.
2. SXI_CACHE > Adapter Engine still does not show the Decentral Adapter. I've even bounced both systems and the SLD.
per Chirag I've also double checked blog "Basic Steps In Decentralized Adapter Engine
This Decentral adapter is in DMZ #1, so I must use the IP of my SLD for the SLD access and my Main PI is in DMZ #2. I've checked to make sure ports 50000 and 3300 from Decentral to my PI system work - are there any other ports ?
Thanks...Scott B.

Xpower ac adapter not showing in device manager

Help!!
this is my third board and have just reassembled this board yet again trying to get the Bluetooth/wifi adapter to work yet again.
The adapter is not showing in board explorer or device manager. I have reseated this numerous times and have tried a different adapter with zero luck. I sthere a bios setting to enable this? I am currently using bios 1.5.
Any help would be greatly appreciated

BIOS->Advanced- see if there is tab like Intel Ethernet ........... Go into it if it is there, and see if it shows if adapter is connected or not (Not link connection as this will bne disabled)
Take adapter out and see if it has bent pins, as this might bre causing the issue. If all fine, get it bnack into the slot for it and take motherboard out of the case and test on non conductive material (motherboard box is ok, NOT Anti conductive bag). Also >>Posting Guide<<, and you could also try second BIOS (little switch, flip it when PC is OFF)

File Adapter not showing in Adapter Monitoring

I have created a basic scenario and when I go to check the file adapters they are not showing... Why is this what should I do

Hi Ricardo,
Please check the adapters in RWB...Is the File adapter is avialble or not?
If you can able to see then it should get appear in the Adapter list otherwise please deploye the the adapters once again.
Please let me know if you have any queries.
Regards,
chandu.

CSD 8.01(a) - Agent ACD State Log Display does not show loing time

Hello,
I have a customer that has was upgraded to CAD 8.0 and now the Agent ACD Sate Log Display does not alway show the login time for agents. We moved them to 8.01(a) for other issues but this one remains. Any ideas?
Jeff

Tahir -- These questions are best asked on the general application server forum. They can answer questions related to Oracle9iAS in general, like questions on Enterprise Manager. It is located at:
http://forums.oracle.com/forums/forum.jsp?id=466592
Thanks -- Jeff

Wireless adapter not showing up in device manager

Hello all,
I am having a particularly frustrating problem. I was playing around with the memory timings to overclock my computer and all of a sudden, my wireless adapter ceases to exist to my computer. It does not show up anywhere in device manager (including no unknown devices or anything), only the Ethernet shows up. I have tried a system restore, turned off all OC and my BIOS is updated to the most recent version. Is it possible that trying to overclock my computer caused the wireless adapter to burn out? The motherboard I'm using is the msi x99S gaming 9 ack.
Any help would be very appreciated, thank you all in advance for your time to help out!

remove power cord from the PSU and >>Clear CMOS Guide<<
if the wifi card is removable, try to reseat it
also install latest killer drivers from:
http://www.msi.com/support/mb/X99S-GAMING-9-ACK.html#down-driver&Win8.1 64
[try older version as well if needs]

HP ENVY Rove 20 - Network Adapter not showing after Windows 10 Upgrade

After upgrading to Windows 10 the Network Adapter does not show up. Verified in Device Manager that there is no issue and the driver is there. Removed the device from device manager, attempted to use a different driver, still no success.

MrDimplz wrote:
Really disappointed in HP for not being ready for W10 rollout. I upgraded my HP Envy desktop PC 700-214 and after the upgrade, I could not connect to the internet. Didn't recognize the networking hardware. Went to HP Support (on different computer) and found out here aren't W10 drivers yet for this machine. Very Poor.My wife has a Dell laptop and we have another older Dell that upgraded no problem. Why because Dell is on top of their $__t when it comes to this stuff.Won't by HP again.Did you not try to reinstall the last support Drivers into Windows 10 to see if it works? Also with the lastest Windows HP will probably not support redoing drivers for older system as that will be cost prohibited to do. And it will be up to the Endusers to find the right drivers and software that matches their system to work with Windows 10 assuming they work with Windows 10. As to Dell that is something only Dell can answer that question and since we don't know if this is Dell Consumer or Business product since this falls outside of HP forums to discuss. You can't expect to have drivers if your system is too old to support Windows 10.

Windows 2003 on T61 wireless adapter not showing

I have 7658( CTO) T61 with XP pro.... I downgraded windows 2003 enterprise edition SP2. i have few questions
1. I changed the bios to compatibility mode ( I keep sata then win 2003 not booting, so changed to compatability mode). Is it required that I keep compatability mode.?
2. Wireless adapter is not working ( not showing at all). It is PCI\VEN_168C&DEV_1014&SUBSYS_058A1014&REV_01\4&29E2C51B&0&00E1
I downloaded and tried many drivers from lenovo website but is not working.
I have struggled for a week and searched many forums but nothing is helping me out. Please help me.

You will need the Windows 2003 compatible SATA drivers to stop using compatibility mode. I don't know if they exist... good luck there. Try Intel's web site since you probably have an Intel chipset.
As for the wireless adapter, again it may be a matter of Win2003 not recognizing the device. I would try and manually install several drivers and see which one may work. You may have to force-feed Win2003 since it doesn't recognize the hardware. Be sure you know the manufacturer of the wireless chip... Intel or Broadcom or Atheros? Look at the specs for your laptop.

Actual date hours PROBLEM - Displaying or not "Show time" in "User preferences"

Hello,
This is my current issue. I have a 5 days calendar with hours 7AM -> 8PM.
AM ->When I check "show time" in "user preferences", I show the good hours in ES and EF. When I apply AS and AF, AUTOMATICALY the good default hours are applied if i change the date (7AM -> 8PM)...
But, if i check, "do not show time" in "user preferences" and then i apply AS and/or AF changing date, PRIMAVERA apply automaticaly 00:00 in the hour ans "forget" the hours of the calendar...
It represent a big big problem for me, first of all in the gantt representation.
Any idea to fix this issue ?
Thanks

I think you need to do setting in grantt chart view setting..as Day,Week,Month in stead of user preference as " do not show time".

Mini display port hdmi cable and adapter not showing display on LG TV

Connected my macbook air up to my LG TV 32 inch, via mini displayport - adapter to HDMI and then HDMI cable to HDMI port on the TV.
the TV is detected on detect displays on the macbook - but the TV says no connection.
Does anyone have any idea why this isn't working?
I've tried both HDMI 1 and 2 ports on the TV and neither can detect a connection, although when first connecting it it did say "connecting" for about 5 seconds before cutting out.

Seems like many people are experiencing problems with connecting to a tv via mdp-hdmi adapter. I have the same problem connecting my newly bought macbook air to my 4 year old samsung 32 inch. Both screens goes blue and blinks. My mac recognise my tv though, it says samsung when I go to the screenmenu to change resolution.
I have tried two different adapters, the moshi adapter which Apple recommends and another one. Im experiencing the same problem with both.
I´ve kinda concluded that it has to be a software problem since my mac has started to act strangely after I tried making it work for 20 minutes.
Apple please fix -.-

Mini-Display Adapter Not Working?

Hello,
Has anyone had issues with the Apple mini-display to Dual-Link adapter? Any problems getting it connected to the DVI cable (very tight fit) or have a dead on arrival adapter?
I have a Mac Pro 6-core. I just received my 27-inch monitor and plugged it into the Mini-display port. I have two other monitors - Dell 21-inch monitors. One is hooked up to the DVI port on my Radeon HD 5870. The other was hooked up to the other mini-display port via the Apple Mini-display to Dual-Link DVI.
When I try to connect the DVI cable to the Dual-Link DVI side of the adapter, it is a very tight fit. To get the screws to take hold, I have to press very firmly. Once secured, I plugged it in and the monitor is not recognized. Previously (before the 27-inch monitor came in) I used this very same monitor and DVI cable and it worked fine in the Radeon DVI slot. Still I swapped cables, switched mini-display ports, and switched the two Dell monitors around. And none of the pins on the cables are bent or damaged. It appears it is the mini-display to DVI adapter.
I am in the military overseas, so to return it to Apple is a major event. So I want to be sure it is the adapter before i go to the trouble and expense of sending it back, having Apple send it to a family member, then have that family member send it to me (since Apple doesn't send items to FPO/APO addresses). Anyone else have any issues with the adapter?
Jim

Let me be clearer; I've got the MDP-DVI adapter connected to a cable that is DVI on one end and HDMI on the other. I've got both laptops so I can compare side by side. I plug in the MDP-DVI adapter to the old laptop and all works well; I plug it into the new laptop and while the laptop does see the TV, the display modes for it are all 1080p which is wrong I don't see any desktop image on the TV unlike when I plug it into the older laptop. This is very disappointing as I expect things to just work with Apple products.

HT5019 If my second display is not showing up on the graphics display window, yet the second display is showing a mirror image, how can I get it to recognize the second display and allow me to setup extended desktop?

I'm running 10.9.2 on a Power Mac from 2013. I am using two identical HP monitors. I have a Y adapter to connect the monitors. Which I'm guessing means the computer is only seeing one display since there is only one display output.

There are no PowerMacs from 2013. The desktop tower from 2006 on got named Mac Pro. The problem is probably the Y adapter. You need a videocard with two display ports, or two videocards to be able to make an extended desktop from one to the other. If you gave us the Y adapter make and model, we could tell if it supports screen spanning or not.

2ndary display adapter not showing up

Similar Messages

Maybe you are looking for