2TB USB disks don't work under Windows 8.1. Enterprise Evaluation

Hi,
2TB hard disks don't get started in Windows 8.1. Enterprise Evaluation:
*** Error code 43
*** Unkown USB Device - Device Descriptor Request Failed
*** configured but not started
Hardware is OK i.e. this is Windows 8.1. Enterprise Evaluation problem:
~ the same USB hard disk worked before and after this with older Windows PCs
2TB seems to be challenge for Windows 8.1. Enterprise Evaluation:
~ it runs ok USB devices with < 2TB in the same PC and in the same port
Notes:
~ restart of Windows 8.1. Enterprise Evaluation did not help
~ Windows NTFS format is being used

try this solution
http://blogs.msdn.com/b/usbcoreblog/archive/2013/11/01/help-after-installing-windows-8-1-my-usb-drive-disappears-or-file-transfers-stop-unexpectedly-r-a-post-title.aspx
or if still not solved, I suspected this USB drive attached during Windows 8.1 installation, I suggest remove it at device manager and scan for the new device and lets see if windows can detect this HW, try also update all driver if there is any update for
this PC and update windows or update OS to pro version

Similar Messages

I installed windows 7 with bootcamp, also the support software with the drivers. Everything works fine, but my usb hubs don't work on windows. Can Anybody help me?I´m using an iMac with OSX.

I Installed windows with bootcamp on my imac, with the support software(drivers,etc).
Windows works perfectly appart from the usb hubs.
Can anyone help me?

Hello,
Are these the built in hubs, or external ones?
If external, are they bus powered or do they have their own AC power?

Will Photoshop 7.0 work under Windows 7?

Will Photoshop 7.0 work under Windows 7?

To get Photoshop 7.0 (or 7.0.1 in my case) to work under Windows 7 64-bit, I ran the CD's Autorun under Windows XP service pack 2 compatibility. I also set the same compatibility prefs in Win 7 for the setup.exe file in the Photoshop directory of the CD-ROM.
You'll possibly encounter an error about the scratch disk being full - this is because PS 7 fails to understand big hard drives (the huge free space number looks like an empty disk, it's kinda like a Y2K problem, since PS7 programmers or the API writers never imagined so much free space, I guess). In this case, two things are important:
You need a partition that's less than 1TB (not sure about the size, it's in another thread) for the scratch disk. I used my system's recovery partition (only 2GB free, however). Other advice I found was to create a scratch partition using Windows 7 partitioning. Maybe a USB key would work? Surely not very fast...
PS 7 will fail on startup with the "scratch disk full" error and exit. To get PS 7 to allow you to specify it, hold down CTRL and ALT when the program is launching. You'll be given a chance to indicate the partitions.

AC97 onboard sound DOES NOT WORK under Windows 2000

Just an FYI, the AC97 Audio on your MSI mainboard will not work under Windows 2000, for which the AC97 hardware is not certified. If you try to use it, your audio output will be intermittant at best and will crash your audio applications at worst. A maddening and disheartening problem for people like me who didn't realize the problem existed and spent many hours trying to getting it to go away.

hiya -
I am have this trouble as well!
Are you useing professional, or Advaced server?
I have done EVERY kind of update... so dice.
*sniff *

Desktop themes don't work in Windows 7

Just loaded Windows 7 under Bootcamp. Desktop themes don't work. The choices offered in the Control Panel just don't take when I click on them. I'm stuck with a plain black desktop. What gives? Graphics seem ok but maybe I'm missing something.

Hi lida80,
Welcome to the HP Community, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I will be happy to help you with getting your function keys working for you. You mentioned they don't work in Windows 7 Ultimate, have they worked with other operating systems? If so which ones. What is your product number?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Will the dynamic graphic chip switch work under windows?

Will that new function of the newest MacBook Pro work under Windows, using Bootcamp?

Lodewijk Hartong wrote:
So if I install the new bootcamp drivers it should?
I don't know. If Apple put the capability into the video driver it will. If they did not put the capability into the video driver it won't.
You will probably get better information if you ask the question in the bootcamp forum. I stopped using bootcamp at least 2 years ago.

X230T camera does not work under windows 8

Hi!
Is your camera working under Windows 8?
Mine is not. It used to work some time ago, but even then the driver was instable. Now, since a few weeks, it seems not to work at all anymore. Reinstalling the driver does not help.
This may ba a hardware or a software issue, that's why it is important for me to know if yours is working.
Thanks!

As I wrote, I have tried to reinstall the driver without success.
It should be a hardware problem if you are able to run the camera perfectly. Are you using a 64- or 32-bit OS?
Thanks!

[SOLVED] Keyboard-shortcuts "alt+." and "alt+d" don't work under X11

Hi,
I switched from gentoo to archlinux and everything is running fine except my following really annoying problem:
The keycombinations "alt+." (insert the last parameter from the line before) and "alt+d" (delete the word under the cursor) don't work under X11 (in my xterm).
They work before I start X with bash and zsh btw...
My "/etc/X11/xorg.conf.d/20-keyboard.conf" looks like
Section "InputClass"
Identifier "keyboard"
MatchIsKeyboard "yes"
Option "XkbLayout" "de"
Option "XkbModel" "pc105"
Option "XkbVariant" "nodeadkeys"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
It is really annoying without these keys working and I have no clue where to look. Can anyone give me a hint?
Thanks
Last edited by eistaucher (2015-06-03 06:39:22)

flipflop wrote:
Did you set "XTerm*metaSendsEscape: true" [0]?
[0] https://wiki.archlinux.org/index.php/Xt … l_Variable
Thank you @flipflop. This solved my problem!

Driver for HP Laserjet 1012 to work under Windows 7- 64 bit

Am trying to install a HP Laserjet 1012 to work under Windows 7- 64 bit and at HP Support, could find drivers for Vista -64-bit only.
I have tried to install this Vista - 64 bit driver and it does not seem to even print a test page.
Is there some other tweak that I need to make or
or
does it mean there will be no driver specifically usable for Win - 7 and I might as well junk the printer?
Thanks in advance.

Hi
Add Printer
Click Start then select devices and Printer the select Add Printer then select Add a local printer Use an existing port -> Next select the Printer from Manufacturer list and select the Printer from Printer list click Next and follow the Instruction.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

ITunes and Quicktime don't work on Windows 7 64-bit

iTunes and Quicktime don't work on Windows 7 64-bit. I tried to uninstall and install the package according to Apple support article (http://support.apple.com/kb/HT1923) but still the same problem. I even tried to stop the Bonjour, it didn't help either. When I try to run either iTunes or Quicktime I get a Windows error message "iTunes has stopped working", with details like this:
Problem signature:
Problem Event Name:          BEX
Application Name:          iTunes.exe
Application Version:          10.3.1.55
Application Timestamp:          4deec351
Fault Module Name:          StackHash_0a9e
Fault Module Version:          0.0.0.0
Fault Module Timestamp:          00000000
Exception Offset:          00000000
Exception Code:          c0000005
Exception Data:          00000008
OS Version:          6.1.7601.2.1.0.768.3
Locale ID:          1033
Any suggestions?
Thanks.
Sergio

Taken as a whole, the symptoms suggest that another application (other than QuickTime itself) has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
Open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

USB 3.0 Not working in Windows 8

Hello all,
I have a msi 990xa-gd55 and cannot get my usb 3.0 to work with windows 8. Everything worked when I had windows 7 installed, tried installing the windows 7 drivers but they do not work. There is no usb 3.0 windows 8 driver on the download page, anyone else having this problem or found a solution?

Quote from: xmad on 15-December-12, 02:34:59
Are you using the most recent bios?
7640vM5.zip 22.5
http://www.msi.com/product/mb/990XA-GD55.html#/?div=BIOS
Also, try a full cmos clear and see if that helps anything.
No I am not using the most recent bios, just the one that came with it when I bought it. It worked when I had it installed with windows 7, then i had it out for maybe 3 months and built a new comp with it. Do you think flashing to the latest bios would solve the problem? It could not hurt i guess. Also, yes, usb 3.0 is enabled in the bios.

After update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.

hello,
after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
The only "solution" is to restart my Mac.
- SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???

I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
My solution:
Cold start with Command-v pressed.
This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
Maybe Cmd-v set open firmware params and fixed some corruption.
Anyway: my mac mini works again.

Rocketfish Bluetooth Keyboard RF-BTKB2 not working under Windows 7 64 bit

Rocketfish Bluetooth Keyboard RF-BTKB2 not working under Windows 7 64 bit
Anyone had successs in this or another Bluetooth Keyboard after a bit of a struggle? What did you do to get it working? When I Add Device in Bluetooth it sees the keyboard but enlessly scans for it when I try to select and connect. The Rocketfish Bluetooth mouse worked just fine.

My friend, i have both, the bluetooth mouse and keyboard here that your talking about. and the keyboard was a struggle to pair with the windows 7 64 bit.... i think i spent 2 days working with it. and i didnt try anything special, i just kept trying to pair
it, and unplugging the dongle and working with it... and after a while. it worked... Lately though, i have been looking into getting a wired mouse and keyboard becuase of the delays and sleep time i have with my current keyboard(rocketfish). supposidly there
is a way around the delays but it disables all the options on your keyboard. IE the media buttons, and web browsing features. and my mouse keeps dieing off too....
Also, after researching these products more, i found that alot of people experienced similar problems with them, Being delays and mouse failure. Even with fresh batteries and all. The products werent meant to be used long term(2-3 years) for extensive use...
I dont know about you but i thinki paid 100 bucks for the pair so thats only 25 bucks a year... Which is kinda silly considering i coulda got a better one that wont cough up on me.
If anyone reading this finds a good wireless keyboard that doesnt delay, and a mouth that doesnt delay...(my biggest concern). Please mention it. i am very interested in.

USB ports don't work - 880GMS

http://
HELP ME
My usb ports work fine until Sunday, I restart the W8 OS and they don't work (my last activity was configure a router but I didn't install anything). I've two OS (W8 and Ubuntu 11.1) and I tried all and my USB ports don't work. I don't have any idea about the cause of the problem. All work fine except my USB ports. They are enable according to the BIOS but the OS (W8, W7 or Ubuntu) doesn't recognize any device.
I tried this things:
- Change my porwer supply
- Restart the BIOS to the Fail-Safe and Optimal value default
- Clear the CMOS (Changing the jumper and remove the battery)
- Remove the W8 and install W7
- Remove W7 and install Ubuntu 11.04
- Flash the BIOS to the last update (it's the same that was loaded in the BIOS)
Currently, I don't know what I must do it. I'm really disappointed with this board (MSI 880GMS-E35). This is my second problem with these model. Previously, I've one and it didn't supply the energy to start the proccesor (Phenon X4 955). My actual board works fine until Sunday.
Please help me to solve the problem.

OK, I have no idea but fortunately my usb ports work fine now.
I don't know how to fix the problem. But I can assure that thanks to Ubuntu it's fixed. My last two operations were:
- Flash the BIOS
- Check lsusb
Yesterday, I'm full disappointed and I was going to prepare my hard discussion with my provider when suddenly I found a this post:
http://askubuntu.com/questions/69594/my-usb-ports-randomly-stop-working-till-a-reboot
But before to enter the command in the Ubuntu's console, I saw that my USB devices work. It's amazing!!! I'm a newer electronic engineer and I saw events similar that this more than once time in my labs (Typical student experiences).
If anyone has the same problem, I could recommend:
- Check BIOS usb options
If these are ok, else enable the propertly options
- Check # lsusb (In Linux)
If your ports don't appear check the PSU (Maybe there are others things that you should check) else
- Check # dmesg | tail (Before and after to connect a usb device)
If there is an error saw in forums, maybe it's the common problem so far (Incompatibility in the kernel -error hci-)
- Type # acpi = force irqpoll
ELSE
- Flash the bios as show in this forum
ACLARATION: I think that this algorithm might help you but I don't prove this. It's your responsible to do that. I only write the items that I learn with this issue.
CONCLUSION: I don't wish that anyone has this problem. I lost one week trying to solve it.
POST RELATED TO USB DON'T WORK CAUSE PROBLEM (ABOUT dmesg and interpretation)
https://bbs.archlinux.org/viewtopic.php?id=102553
POST RELATED TO FLASH THE BIOS
https://forum-en.msi.com/index.php?PHPSESSID=0uaa1psa1gln707een5uu6sb16&topic=138659.0

LiveCycle ES 8,2 JBoss : will it work under Windows PC 2007

LiveCycle ES 8,2 JBoss : will it work under Windows PC 2007 virtual machine? (Turnkey or non turnkey version)
Thanks
Yog

great - another few hundred pounds I'll have to spend..... thanks adobe... more profit for you... but here is another question what about cs4? is that compatible with windows 8 as I have a web standard version, what ever that means but I dont have photoshop for CS4 as I got it for the web desing ...and there no chance of using your cloud thingy 'cos I aint spending $50 a month !!!!
can anyone suggest what I should do - I have my original Photoshop 6, then I purchased CS2, following that I got CS4 Web standard as I was doing a Dreamweaver course and the CS4 came as part of the course but with no photoshop. Now I use adobe bridge and photoshop extensively, these are the 2 I realy want and with Cs2 it worked great as it upgraded Photo 6 to cs2 and I got Bridge NOW I GOT NOTHING !!!! how frustrating

2TB USB disks don't work under Windows 8.1. Enterprise Evaluation

Similar Messages

Maybe you are looking for